Recorded audio is playing back out of time with midi drums, I'm using a new avalon 737 with it too.

I am trying to record guitar over a midi drum track, its all great except the guitar plays back out of time with the drums, i have just introduced an avalon 737 compressor, it didnt used to have before.
Before the Avalon it all worked perfectly, cant figure out how the avalon would make logic play out of time, I am recording through an Apogee Duet 2.

Yeah, and it didn't work.
I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one.

Similar Messages

Recorded Audio Not playing back in Premiere Pro

I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still new to all of this. Any suggestions?

Hi AkaDc,
Though it was made for Premiere Pro CS6, this video tutorial should assist you:
Hope it helps.
Thanks,
Kevin

Issues with play back in the time line

I am having issues with play back in the time line.
am working with footage captured off a DVCAM Tape in a DV/DVCPRO NTSC Time line.
My settings are set to match the source footage so I dont have to render. What ends up happening is the footage at times plays fine and smooth and then out of no where it will start playing choppy. like its lagging. But the Audio stay fine. I use to have to problem before but then it stopped.
Now its back and I can not figure out why it does this. Usually a restart of the system would help solve it but now it still keeps coming back.
i have tried different settings in the RT menu and still seem to be having the same problem.
i am running the footage of 3 1TB drives in Raid0 and the System has 16GB of Ram. So I dont see this being the issue.
any ideas?

of course not, the system boots from a 320GB Western Digital Hard Drive. (the one that came with the system)
I have a feeling that its not the Hard Drive, but no idea what it could be.

Multiclips and multiple audio tracks playing at the same time

I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
G5 Mac OS X (10.4.3) Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

...

Multiple audio tracks playing at the same time?

Does the Adobe Elements 12 allow us to have mulitple audio tracks playing at the same time? Is there a limit to the number of tracks?
Thanks!

Hi Jennifer3211,
Yes you can play multiple audio tracks simultaneously. The maximum no. of audio tracks can be 99.
Thanks

When using my new nano 7 with nike , my music stops after the 30 minute voice alert even though I have set my run for over 30 minutes.It cancels/deletes my run/workout when the music stops.This has happened several times.How can I keep this from happening

When using my new nano 7 with nike+, my music stops after the 30 minute voice alert even though I have set my run/workout for over 30 minutes. It also cancels/deletes that run/workout. This has happened several times. How can I keep this from happening?

If possible I would arrange for a good service center to go over it. Hopefully they have a variety of parts in stock. They can test and verify all is working. The previous attempts are based on guesses by the person at the other end of the phone without diagnostic tests to assess the culprit. It is extremely unlikely for a webcam to fail & for it & a Mic to fail together should be an indicator to a good technician it is something else. EG Motherboard
Take it to a servicing dealer and wait for it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Audio is playing back too fast

In previewing, the audio plays fine for about 15 secs and
then starts playing back very fast (aka chipmunk sounding). Sounds
like sample rates got out of sync.
Suggestions?

Let's see if we can figure out the cause ... that might help
us with the "cure".
1) How are you listening to it - locally as in F4 preview?
Single-slide preview? From a remote location (web)? Locally after
publishing?
2) How many slides are covered during that 15 seconds of
"good" audio?
3) Same slides every time, or does it play well for only 15
seconds no matter which slide you start on?
4) How was the audio put
into the movie? Created by "narrative" during the recording
process? Imported from a 3rd party audio recorder - if so, what
format was it in when imported, WAV or MP3? Inserted manually
during editing, on a slide-by-slide basis?
5) What IS the sample rate and other "stats" for the audio
file(s)? *You can check this from the dialog at "Audio >
Advanced Audio" . . .
6) Is it Alvin? Theodore? Which chipmunk? And in fact, did a
chipmunk actually DO the audio??
Thanks for your added info - and your sense of humor . . .
Oh yes, and by the way, "Welcome" to the Captivate User
Community!!

Audio tracks play back wrong audio

at some point in my mix sessions , in different sessions , one of my audio tracks starts playing back audio from both its channel and another channel simultaineously. there not always adjacent tracks , not assigned to the same voice and have seemingly nothing in common. if i change voices i can sometimes allieviate the problem or it will start playing a different track audio simultaineously. i have two records pending and need some immediate help please...

D,
Just to warn you (or throw some experience in). Logic 7 has for me, operated poorly with sessions created from older versions of Logic. It is often fine if you just want to duck in and grab something but the sessions do go weird if you just keep using them they go batty and can often get kind of self destructive.
Updating/merging/replacing the environment is one of the first steps to take, just creating new updated objects helps, even using presets and channel strips from older versions seem to give problems. Copying objects and configurations over can give you different results, but basically the more you replace and create as new the less problems you'll have.
So you know you have alot of reworking to do if you really want to do alot of work with these in the current version. Determine where a good transition point would be and try to follow with that. Often mixing or sooner than later but plan on taking some time reworking things. It's almost easiest to just grab everything and paste it over into a 7 built autoload-without the plugins. Audio Objects and plugin instances seem to give alot of problems. I usually end up redoing a bunch of stuff if I have a ways to go and export away. Things really get fixed along the way but it is a pain and better to do it sooner. Unless you're coming up on a mixing stage or something soon I'd just do it (and keep a backup of the older versions just in case I want to retrieve something.
I am working on an album that was created on a 6 autoload and 12 of 13 tracks had to be reformatted in 7 from forward INcompatabilities-some of them twice because they did not get a 100% clean autoload (as in the instruments and/or audio objects were opied over). Maybe I'm just weird, don't take only my word on this because it is alot of work for many projects to just redo things like this but you should be aware of what some people have encountered and be prepared to take some of those steps if there are more people saying their experience has been like this.
Best of Luck

Mpeg audio not playing back correctly

I just upgraded to CS6 and am doing my first project in it.
I have a Sony HVR-Z1U camera which i recorded HDV to and have captured this into PPro using HDV capture settings
Here is the result of the capture
File Path: V:\HC2012\Show\Untitled Clip 04.mpeg
Type: MPEG Movie
File Size: 9.5 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:51:54:21
Pixel Aspect Ratio: 1.3333
When i try and play back the clip in CS6, the video comes out ok but the audio sounds like a chirp.
If i right clip the clip and say to edit in Audition, it sounds fine
If i play the file back from Explorer in Windows Media play it looks and sounds fine
If i import the same file into CS5.5 it plays both video and audio fine.
What am i doing wrong here?

Try clearing your media cache files and see if that fixes the issue. You can do so by going up top inside premiere and going to "edit>prefrences>media then click where it says "clean" under media cache datebase. This might fix the problem.

Audio randomly playus back out of sync

One of the FCPs at a place I work at has a strange audio sync problem.
It's an 8-core MacPro running the latest versions of FCP and Snow Leopard. It has a Kona LHe card with the latest firmware. Editing is done using IMX50 codec, SD PAL. Monitoring is done on an external monitor and speakers via the AJA card.
All is ok until you turn on audio scrubbing, after which the audio rendomly goes out of sync, stopping and starting will sometimes play back in sync. Monitoring via the Mac's internal speakers is always in sync, and the video is always playing back ok (the Mac screen and the external screen are always in sync (cuts occur at the same time on both screens).
Laying to tape and exported Quicktimes are always in sync.
I'm guessing it's some kind of AJA issue, has anyone any thoughts?
Cheers
Steve

Welcome to Apple Discussions, m
See if any of the suggestions offered here reduce your sync quality problem enough:
http://discussions.apple.com/thread.jspa?messageID=7089133&#7089133
If, after making certain that your Mac is running well, has plenty of free space on the correct drive, etc., your sync is still not close enough, you can manually re-sync any parts that are unacceptable to you using either QT Pro or iMovie.
If you check carefully, you will see that not even pro video is always perfectly synced. It is a lot of work to get things "nearly perfect," but, with a bit of practice, it doesn't take long to get things "close enough" for me.
I use the same simple process with either QT Pro or iMovie, so you can use whichever you find easiest. Whichever you use, keep the original AV clip safe and *_work on a copy_* in case something goes wrong.
If you do not already know how, here is my process, but you can adjust for your workflow:
(1) Copy of the audio track.
(2) Add the audio track copy to the AV file.
(3) Silence the original audio and work on audio copy.
(4) Insert small blank audio clips (or split and slide if using iMovie) if needed to make the audio later.
(5) Cut small bits out of quiet parts (or split and shorten in iMovie) if needed to make audio sooner.
(6) Repeat until satisfied and delete any tracks no longer needed.
(7) Save the adjusted AV file.
(8) Enjoy!
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Can't stop audio from playing back on my MacBook Pro

First, Im new to Mac, Ive only been using it for a month, but loving it so far. =) I'm trying to record vocals in Logic Pro 9. My set up right now is MXL 990 plugged into a Phonic Firefly 302 USB interface and that is plugged into my MacPro. Now my problem isnt really with recording, I can record vocals fine. My probem is I want to hear my vocals with all the effects and plugins on when I record. But my mac wont stop playing back my dry vocals through my computer. I dont want to monitor vocals through my mac, only through logic. So i tried to go into Audio MIDI Setup and mute the playback but when I do that I cant record them in logic anymore. Its really annoying everytime I try to record hearing a version of my vocals with effects and hearing another version dry all at the same time, and they arent even in the exact same time, so you get a little slap back echo super annoying. My Audio MIDI Setup is set to "Built in Output - use this device for sound output. Phonic Firefly USB - Use this devise for sound input. I have tried setting that to the output also but it didnt do anything, still had the echo.

Thank you for your replay
It was working on my Mac before installing the new update of Mac software. then its corrupted
from where I can ask for refund? as I bought from App Store ?
regards

How do I get audio to play back while I'm capturing video?

I'm looking to add an audio file to my project and have it play back while I'm capturing video from my MacBook's camera. That way I won't have to worry about lining up the audio and video, everything will be in sync because I recorded the video that way. In the video I will be playing guitar to the audio file, so the audio and video need to be lined up perfectly.
Is this possible? Should I go about doing it another way?
Thanks

Hi there
Look in the Timeline. Specifically the area where the names appear on the left side. Now look at the bottom. There you should see a small speaker icon. My guess is that you have clicked it to mute it. Jumps right out and literally SCREAMS it's muted, no?
Please report that as an issue to Adobe. Ask for a clearer indication!
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

URGENT Strange problem with no audio files playing back in arrange

Anyone ever have something in Logic Pro X (newest .1 update, auto updated on me but seems fine otherwise) where playback of audio just stops? Like, meters still move for automation, audio files still remain in place, but nothing is even metering? Another alternative of this project (which i dont' want to use) works, and this just sorta stopped playing back. nothing i can think that triggered it. I can start up a new instrument and it plays back and records just fine. All of my existing audio just won't play at all.
I tried changing my interface and back in preferences, I've restarted both program and machine, but just this one alternative of this project (the current and most important of course) just won't play back audio. It even plays back in the wave editor window, just not in the sequence.

Hi K-leb
Welcome to the HP Forums!
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that the sound on your Envy notebook is unsatisfactory. You did restart once after updating to Windows 8.1 and it was OK until you had to restart again, and it reverted back. Here is a link to a YouTube video on How to Fix audio on windows 8.1 after update.
You could also run the HP Support Assistant to help look for updates and resolving issues. Windows 8.1 also has a built in troubleshooter you can use.
Press the Windows key +C to open charms
Type troubleshoot sound in the search bar and press enter
Follow the on screen prompts.
If you would like further assistance would you please provide your exact model of Envy you have. How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

How do you start 2+ audio files playing at the same time?

I am trying to play 2 audio files at the same time, but I cannot figure out how to start them playing at the same time without latency issues.
If someone can please explain the process for doing this using Audio Queue Services, I will forever be in your debt.
This is for iPhone, but I was getting no love in those forums on this issue.

Thanks for your reply. Apple's iPhone Application Programming Guide states the Following:
*Playing Multiple Sounds Simultaneously*
To play multiple sounds simultaneously, create one playback audio queue object for each sound. For each audio queue, schedule the first buffer of audio to start at the same time using the AudioQueueEnqueueBufferWithParameters function.
This leads me to believe that it is possible. I have just not been able to get them to play precisely the same time, there is always delay.

Recorded audio is playing back out of time with midi drums, I'm using a new avalon 737 with it too.

Similar Messages

Maybe you are looking for