Recorded midi file with Garageband keyboard-only the beginning of it plays

Hi,
When i play a recorded midi sound from the jampack with the midi keyboard included (world music instrum.), once the track is recorded, if I start to play it and press stop in the middle of a long note, and press play again, the last part of this note isn't heard. It's no big deal, but for editing it's a pain in the neck because in order to hear the sound I have to go back to the beginning of that same note. Anyone here knows what this can be due to?, Ive checked the garageband help and not much is said about that...
Thanks for the help.
Patrick.

It's not a GB problem, but inherent to midi - the data consists only of "note on" / "note off" events, not continuous information about a key being pressed down. So if you start playing your song after the "note on" event, the program has no way of knowing that the key was pressed earlier. It then just ignores the "note off" event.

Similar Messages

I need to create a MIDI file with control cues only. Is that possible?

I need to create a stand alone MIDI file with control cues to control a non-musical device which does understand these files.
Must I create a virtual device in MIDI Setup for Logic to talk to?
Must I create notes in order to create regions that will export?
Is it possible to do this in MIDI channel 0?
Is LogicPro the tool to use to do this?
The maker of the device uses ProTools to create his MIDI files.
I use a MacBook Pro with OSX 10.10.2 running LogicPro 10.1.1.
Thanks!
Doug

No you cannot trigger a paragraph style with a character or character style.
But you can have a Apply Next Character Style
Accountable for: <paragraph style name "Heading 1">
>> Bullet1 <paragraph style name "Bullet">
In the Heading 1 style go to "Next Style" under "General"
and choose "Bullet"
The select from "Accountable for:" to the last bullet in the list
Right Click on the Heading 1 style and go to Apply Heading 1 and Next Style.
http://creativebits.org/indesign/taking_advantage_of_indesign_s_next_style
http://indesignsecrets.com/where-is-apply-__-then-next-style.php

When I import TIF and JPG files with same metadata, only the TIF files are imported. How can I change that?

I have imported and renamed TIF and JPG files with the same metadata re recording date and time. Only the TIF files are imported, the JPG files remain unimproved. Thus I have in the Finder e. g. 13 image files in the same folder in which Lightroom only finds 10 files. Any ideas for resolution welcome!
Thanks

Turn off the option Preferences > General > Treat JPEG Files Next To Raw Files As Separate Photos. Then do an import again. It appears that, in this instance, LR considers a TIFF to be a "raw" file.

HT4622 How to import .band and .mid files into GarageBand for iOS

Using GarageBand for MacOS X, I have no difficulty importing and playing .mid (MIDI) files. Indeed, I can even rename .kar (Karaoke) files to .mid, import them into GarageBand for MacOS X and see the lyrics along with the score. Using File Sharing for iOS apps in iTunes.app, I have tried to import .mid and .band files (made from .mid files with GarageBand for MacOS X) using this mechanism. I get no errors but it doesn't seem to work. That is, neither the .band file nor the .mid file are accessible from within GarageBand for iOS as far as I can tell. What should I be doing instead?

As I understand it GarageBand for iOS .band projects can be imported to GarageBand for OS X, but the reverse isn't true. GarageBand for iOS does not import midi files.
The File Sharing section of iTunes doesn't validate the files you put into it, but if the app doesn't like the structure of the file it will just ignore it.
tt2

Custom batch rename files with Aperture 3 in the following format: IMG_0023.cr2 to Smith_YYMMDD_0023.cr2? I cannot find a way to structure the date in Aperture as such, as well as extract only the camera file

Please advise how to custom batch rename files with Aperture 3 in the following format: IMG_0023.cr2 to Smith_120816_0023.cr2? I cannot find a way to structure the date in Aperture as such (YYMMDD), as well as extract only the camera file (0023, for example). Adobe Bridge CS5 can do this, but NONE of the Adobe software is retina optimized, and is terrible to look at.

In Aperture you are limited to renaming files by the entries in the File Naming preset window.
At what point are you looking to rename, import or export? It might be possible to do what you are looking to do external to Aperture either via a script or other software.
regards

Can't import midi files in garageband 11 after lion install?

I can't import or open midi files in garageband 11 ,tried reinstalling from my app dvd, will not allow, it is grayed out was using snow leopard and updated
to lion and thats when it quit also my quicktime pro 7 will no longer export midi.

Same here. Now that I think of it, I recently put in Logic Studio 8 and Garageband didn't open on it's own anymore. That was iLife'06. I then up-graded to iLife '08 and Garageband still doesn't open to a new project. The only way I can still open Garageband is to make a "template" out of one of their demos, then when that opens I strip the tracks out and start with new ones. By the way, I just tried to install XLN Audio's Addictive Drums. They work in Logic Studio, but do not open at all in Garageband. Error message says the plug-in is not "valid". So much for Garageband being easier than Logic.

Problem playing .mid file with QT Player on an external MIDI instrument

Hello,
I am trying to play a .mid file with QT Player (so I can play it from various softwares as Keynote) and send it out on an attached MIDI device (thru M-audio or Tascam interface). Unfortunatelly, I can only choose "QuickTime Instruments" from the pop-up menu in QT Advanced Preferences. I tried with several configs (G4, G5), several MIDI interfaces, and last flavor of both Panther and Tiger with QT 7.0.4. I configured MIDI setups normally and I can play on exernal instruments from Logic or other sequencers.
Any idea why I cannot see my devices from QT directly ? Thanks,
M

Hello,
I have tried with a Tascam US-428 with 10.3.9 and QT 6 (latest) and 7.0.4 hooked to a Akai S3000. I also tried on a G5 with a MOTU interface (all last software versions). At home, I have tried with my Ti550 running 10.3.9, QT 6 (latest) 7.0.1 and 7.0.4 and also with my Sawtooth (10.4.5, QT 7.0.4), both with a M-audio Uno interface hooked to a E-mu Proteus expander.
All configurations behave the same. They are working fine with various sequencers (Logic, PT, some freewares) but interfaces never show up in the advanced preferences of QT.

How do I import a midi file into garageband for iPad?

I have a midi file (with .mid extension) on my laptop.
Can I import it into Garageband on my iPad 2 and if so how?
Thanks in advance!

Connect your device to your computer.
In iTunes left Pane, click your ipad under Device. On right Pane, click Movie Tab. Check box Sync Movies, then check the movie you want it to be sync, then click the Sync button at the lower right wimdow.

HT2929 record live set with garageband

hi, is it possible to record a liveset with garageband through my mac connected to my mixer ?
rgds niels

niels van der burg wrote:
is it possible to record a liveset with garageband through my mac connected to my mixer ?
yes, plug the console into the line-IN on the mac and set up GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)
however GB would not be my recommended choice, especiall if the recording is to be unattended. if GB throws a modal error dialog it will cease recording; an audio editor is often a better choice:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

When round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

when round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

That's not the workflow that I use. I have my Lightroom preferences set to create TIF images when going to Photoshop. I keep the original raw file and the TIF image (usually reduced to an 8-bit image) and only export JPEG's when they are needed to send to a lab or to send to someone over the Internet. JPEG files are highly compressed. I only create them when they are needed, and they are discarded as soon as they have been used for their intended purpose. I keep the raw file and the Photoshop-created TIF in my library. This requires extra disk space. But I always have the highest quality files available.

How to recognize midi files with iTunes 10.6 ?

iTunes 9.0 recognizes midi files and can it be easily converted into mp3 files.
For the interfacing with iPad2 I must use iTunes 10.6 and it seems this version is not recognizing midi files.
How should I do to manage midi files with iTunes 10.6 ?
Is there in App Store any application with this feature ?
Really it's a pity that a new iTunes version loses fatures instead of gaining !!

The MIDI files in my library still work perfectly. It may be that you simply need to install QuickTime which is no longer installed as part of iTunes.
tt2

I live in the US and want to buy a MacBook Air with norwegian keyboard in the Apple Store. Is that possible?

I live in the US and want to buy a MacBook Air with norwegian keyboard in the Apple Store. Is that possible?

In earlier years you can go th an Apple Store, buy a Macbook Pro and ask for a replacement to a other type of keyboard. I do this 2-3 times in the last years for german keyboards. If you done this on the same day you bought the macbook, the replacement happened without charge anything. It was a great service.
Yesterday i go back to the same store like before and both - the sales representative and the guys an the GeniusBar told me - that this is not offered by Apple anymore. Because the US Apple Online Store do not offer other Keyboards the US-based keyboards and the German Apple Online Store do not deliver to other countries the final conglusion from the Apple Stuff was:
Flight to germany, but it over their.
I see here in the Support community a lot of questions about norwegian, german and other kind of keyboards they want to buy in the US. Their is obviously a need for this. And from the logistic standpoint, it should be easy for Apple to offer that in the Online Stores itself.
For me the conglusaion is: I stay with my old Macbook Pro and hope i need no replacement within the next years. To order it in germany, ship it to a friend, pay taxes twice (in germany and vur customers) plus shipment, make it to expensive (bottonline: 600-800$ more than buy it in the US) make no sense to me.

I have a new windows PC and when I registered my account with I Tunes only the recent music that I purchased off I Tunes was in my Library all the music that added to the library is missingÉ

I have a new PC running windows 8 and when I registered my new account with I Tunes only the recent music that I purchased off I Tunes populated in my music library. The other material that I imported into my library from CD is missing. I am missing several hundred recordings and want to know if it is possible to get them back without having to go back to my old PC and manually make out a missing catalogue of music and re-importing back into my new PCÉ

Your media is only where you put it.
Installing iTunes and signing into your iTunes account does not cause media to magically appear.
Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.
FYI, there is nothing to import and if you are smart and want to avoid duplicates you will NOT import anything.

A friend bought second hand macbook air mid 2011 with crossed circle on the display, we tried recovery from partition and same thing happened, after internet recovery it stays the same except now it asks for password for boot option, what happened?

A friend bought second hand macbook air mid 2011 with crossed circle on the display and give to me to try to recover the system, I tried recovery from partition and same thing occured, after internet recovery it stays the same-crossed circle after reboot, then we tried to boot from USB with mac os 10.8 on it, it installs something,like it has being finishing installation, rebootes, and now it asks for password for boot option.We have no idea what that password could be.What happened!!!

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

Read Document in FileUtilities cannot search a file with french character in the file name

Hi,
I am trying to search a file with french character in the file name like 'captures écran.doc' in my unix server directory, and Write the file somewhere, say in a list of documents or, write on file system to another directory.
I am using to Read Document in FileUtilities of Foundation, but it cannot read the file due to french character in its name. Although it can find any other file name without these french characters.
Tried renaming but that also cannot find the file with french character name.
Please provide any idea to solve it using LC operation.
Regards,
Rohan Raj.

Hi Thomas,
Thanks for the post, but I have already found a solution to it a month ago. Sorry for not posting the solution.
You just have to set the '-Djava.property.file.encoding=ISO8859-1' into JVM argument of your server startup, and bounce the server back to pick the new JVM arg set. And now the service Read Document in FileUtilities of Foundation will read all french characters.
ISO8859-1refers to "Latin alphabet no. 1," consisting of 191 characters from the Latin script. This character-encoding scheme is used throughout The Americas,Western Europe, Oceania, and much of Africa. It is also commonly used in most standard romanizations of East-Asian languages.
regards,
Rohan Raj.

Recorded midi file with Garageband keyboard-only the beginning of it plays

Similar Messages

Maybe you are looking for