Recorded new vocal into "varispeeded" project; get rid of artifacts?

Hi,
Original bpm: 120.
All tracks recorded in MIDI except my vocals.
Bump bpm to 125 with varispeed.
I like this tempo.
Now, I record vocals with varispeed ON. They sound "warbley" and watery. I guess this was a big oops.
Is there any way to get rid of the artifacts? It seems like with varispeed on, new audio actually gets recorded at the old speed, and is then sped up.
I turned varispeed off and brought the whole project up to my new tempo of 125. I ticked the follow playback on all the audio tracks.
Do I have to rerecord the vocals, or is there a way to salvage them (like changing a playback property for just that track (like changing the algorithm for just that track). The audio track does "follow tempo" when I tick the box in the Inspector, but it's just that the algorithm is not transparent enough to be used on an upfront main vocal.

Did you resolve the issue of varispeed not working properly. I.e. when returning back to normal tempo the recprding track is at the normal tempo and correct pitch?

Similar Messages

HT1349 When I choose a song or navigate to playlist, the notification sound is a brief 'scratching record' sound. How can I get rid of it? Thanks.

When I choose a song or navigate to a playlist, the notification sound is a brief 'scratching record' sound. How can I get rid of it? Thanks.

Try another browser such a Safari. If you get the same issue then it's probably the site, if it works OK on another browser then it's probably Chrome and you should re-post on a Chrome forum discussion board.

Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

Problem was founded: plugin "Speed dial" was autoupdating this page when open new tabs with him

Had my computer serviced recently and had to reinstall itunes. Now I two accounts. How can I switch to my original account that has all the music I imported into itunes and get rid of the new account?

Had my computer serviced recently and had to reinstall itunes. Now its saying I have two accounts. How can I switch to my original account where all my music that I imported is and get rid of the new one that only shows my purchased music?

Had my computer serviced recently and had to reinstall itunes. Now its saying I have two accounts. How can I switch to my original account where all my music that I imported is and get rid of the new one that only shows my purchased music?

RH10 suddenly won't let me add/import new images into my project

I have tried accessing the "Insert Image" option using the various methods (menu, toolbar icon, right click menu), but once the dialog box is open, I click on the browse folder to find the image that I added via Explorer, but nothing happens and the app freezes. The only thing I am able to do is close RH via the Task Manager. I have tried rebooting and also tried doing this in multiple projects to make sure it's not my main project with the problem. This same thing happens every time.
I CAN add an image that has already been imported into the project... I tried doing that then using Image Properties to bring in the newly created image... same result... freezes the app. My project is only about 50MB in size... and I probably only have 2 or 3 dozen images in it so far.
I am hoping you are not going to say uninstall and re-install because I don't have the disc with me today... working from home.
Help please.

TOTAL weirdness... so I just got into work... turned on my laptop... so i'm not working remotely... opened my project... at first i got this error:
then i continued to get a series of errors of various kinds.. finally one telling me the cpd file was corrupt... now mind you... I had to restart RH several times yesterday... also did a reboot... and didn't get any of these errors...I also tried to import an image into an older project to see if it was the project or RH.. but i had the same problem with the other project - no.. didn't try a NEW project as I was planning at your suggestion because it's working in my existing project now.
so i deleted the cpd... opened the project.. and tried to import a new image.. and BAM.. it worked like always! WHAT'S UP WITH THAT?
I don't understand what the problem could have been if this wasn't working even without VPN...
Thoughts? I'd like to avoid this issue next time I'm working from home.. which will be next week!

Is there a way to combine and old Model of ipod that is no longer synced to any of my computers with my new ipod so I can get rid of one?

I have an ipod nano that my friend gave me with music on it from her computer that I have never plugged into mine. I also just got an Ipod touch that is hooked to my laptop. Is there a way to get the music off the nano and into itunes so that i can only have the ipod touch and get rid of the nano. My goal is to purchase a classic ipod that has much more memory and eventually get rif of the touch but first I need to know if I can lose the nano without losing the muic off it. Any insight would help. Thanks

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Help! New user - I can't get rid of an application!

Hi, there,
I'm new to Mac and LOVE it.
However, I just installed this thing called Earthdesk. Looks great but once I got it installed I .... well, I hate it.
If I move it to the trash, i can't empty the trash because it's in use. I try to find a way to stop it and there isn't one. I try changing the settings on the desktop to see if that will stop it - no go, it just pops back up.
I hate it. Someone - please tell me how to get this off my system? I'm a bit of a PC geek, but I'm new to this Mac thing and I need to know how to get rid of this stuff.
Thanks for your help!!!

If it says it is use just open /Applications/Utilities/Activity Monitor and kill the process there. Then throw the application out.
Now if you want a free program to get rid of all the application's files (/Users/YourUserName/Library/Application Support/ & /Users/YourUserName/Library/Preferences/) then try out the program AppDelete a try. Just review what it finds before emptying the Trash.

Can't drag new media into a project!

I've created a poster in pages and it will not allow me to drag photos into the placeholder spots. I've tried with other new projects and Pages will not allow me to drag any photos from my media library onto any document. The placeholders say "This image is a placeholder. Drag a new media file here to replace it." When I try to drag I do not get the usual green plus sign. Nothing happens. Suggestions please?

Is your system description up to date ?
It claims mac OS X 10.5.3 but iWork '09 requires at least 10.5.5 !
Yvan KOENIG (VALLAURIS, France) vendredi 24 septembre 2010 08:39:45

I set up new phone (5) as a "new phone instead of backing up from icloud. How can I get back in to use the icloud backup? If I hit "delete account" does that just clear the new phone or does it get rid of my whole icloud account.

In the set-up process I clicked "set up as new phone" when I should have clicked "back up from icloud". I can't use itunes for the back up as it is not current. Is there a way to get back into setup? If I click "delete accout" in icloud management will it clear just my phone (so I can start over) or will it actually delete my icloud?

Settings>General, scroll to bottom of screen and tap Reset, choose to delete all data. Then attach to itunes and choose to perform a restore. You'll get the option to restore from icloud.

I have a new MacBook Pro. While getting rid of voice over I ended up with a black box with icons in it and I cannot get rid of it and I can't get off the home screen

I have a brand new MacBook Pro . I got into voice over and then figured out how to stop that but now have a black box in the middle of the home screen and that box has a bunch of icons .....(Keyboard, pointer etc) I cannot get it to close and I'm not able to go past the home screen. Help

If you click on that window, the menu bar should change to whatever program that is. Then click the program name and click Exit.
If that doesn't work, click the Apple icon, then Force Quit. Look for something that says Not Responding and quit it.
Last... if nothing else works reboot and see if that does it.

Replace new image into existing project

I need to replace a image that I used in a transition. This image will fly in from the side from my start page to my main page.
I originally made everything the way I wanted then duplicated the state then I moved the items to be flown on to the page or faded into the page etc...
but now the new imported image is only on one state. if I copy the image from the main state and paste the image to the start state and try to make a transition the image only gets a fade in selection in the timeline. Even if I move the image it will still only fade in. I want the image to fly in from the side.
I think what is happening is that the image is no longer "Linked" between states so it does not know where the graphic starts and where it should end.
It thinks its 2 different graphics. Is their a better way than to copy and paste state to state to be able to keep the association and create a transition?
Otherwise I have to redo hours of work just to replace an image ?????
Please help....

Hi Curtis,
Transitions are between the same item (or "instance" to be fancy) when it has different properties (like position, size, opacity, rotation,etc) in different states. When you import an image, you create a new item in the Art Board. If you copy-paste, you create another item.
If you want the same item to show up in multiple states, right click it and choose "Share to State" and the state you want it to appear in.
There's also a "Make same in All States" that makes an item have the same appearance in all states that it's present in.
For your specific case, though, you have transitions already working on an image, so you should just change the image to have a new source. Click the image that had been working before, click the "source" in the Properties Inspector (lower right), and you should have the ability to change where your image is coming from.
-Bear

Can I import a recording from SHDB into a project in LSMW?

Hi,
I'm working with LSMW, and i would like to know if it's possible to import o reuse a recording that already exists in transaction SHDB?
I tried but it seems that i should create a new recording again in the lsmw althought there exits one that was created by the shdb.
Thank you.
Regards,
Albio.-

Hi,
No, it is not possible to import the recording you have done using SHDB transaction to LSMW as LSMW has its own recording facility, and we need to make use of the one available in LSMW.
Rgds,

8500 909n new printheads installed can't get rid of error message

I purchased new printheads from the HP store. The arrived and I installed them into my printer. Everything worked fine. Several days later I attempted to print something & got the Printhead Probem The following printhead has a problem: black/yellow[k/y}, magenta/cyan [m/c]I re installed them, turned the printer off & left it, turned back on several hours later - error still there. Ran HP Print & scan doctor - it tells me to go ahead & print a page - no go. Erro continues to appear on printer display - I can't clear it & nothing is helping! I have filled out the feedback forms & the surveys but no response. Has anyoneelse experienced this??? Any answer to this??? HELP!!!!

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

When I open up a new tab, how do I get rid of the default 'Bing' tab?

When I click on the + sign for a new tab, the Bing search engine comes up. How can I modify the tab content? I have tried 'Tools' and 'Tabs' option, but nothing works for me under there. My husband's Mozilla tabs comes up with multiple pages he has browsed in the past. I want this.... Thanks.

hello,
Lets try to change it to the way you want. follow the following steps:
Step 1: enter about:config on the address bar. Hit Enter.
https://support.cdn.mozilla.net/media/uploads/images/2014-12-31-20-40-43-72e926.png
Step 2: On the preferences window search for browser.newtab.url. You will see only one option for the result.
https://support.cdn.mozilla.net/media/uploads/images/2014-12-31-20-40-59-3aca0a.png
Step 3: Double click on it and enter the URL of the site that you prefer to open with every new tab page. For example, In the image it is set to Guiding Tech.
https://support.cdn.mozilla.net/media/uploads/images/2014-12-31-20-41-10-22b9de.png
To use the home page as new tab page set the values to about:home. For a blank new tab set it to about:blank..'''For making new tab perform as your husband's browser enter about:newtab in the URL of step 3.'''
Hope it helps.

It wobbled. What do you have to do now?, With the new update, I can't get rid of my functions by pressing down and it wobbled. What do you have to do now?

How do you turn off your various things like mail.messages with the new update? Before I pressed on it and it wobbled and then you could delete it? It won't wobble and just turns back on when I press on it?

Double tap home button and flick the app card upwards.

Recorded new vocal into "varispeeded" project; get rid of artifacts?

Similar Messages

Maybe you are looking for