Recorded old files access in UCCX using Calabrio recording server

Hi
Any help or idea appreciated.
We are using UCCX 7.1.5 and QM calabrio server to have agents calls and their screen shots recorded. The files are being backed up by netbackup to a network cluster. Lately the disk started to be full and no new recorded files are being accepted anymore in the calabrio recording server. The recorded files are all backed up and I need to free some space the disk of the server so that it accpets new recorded files.
Supervisors are accessing the historical recorded files which are sotred also on the calabrio server. I need to know how could I access and let the supervisor access the network cluster to retreive the old recorded files as I need to delete them from the server and have the supervisors to access them from their backed up locations.
Can I have any suggestion here please
Right now I am getting the following errors on the calabrio server due to space limitation on the disk
of Error QM2000 which means that the server reached his HDD space threshold and does not take any calls from Desktop PCs until space is cleared up.
Abdul
Thank you

I probably have asked a stupid question.
My recorded streams are still saved in the applications/appName/streams folder.
And I redirect the www.mydomain.com/streams to point to the applications/appName/streams folder.
And the rmtp recorded streams are abled to connect through http now.

Similar Messages

Enable to record the File Open Dialog window using SHDB

Hi All,
I am using CV02N for BDC recording.
In this transaction I hae a File Browser button, which opens File Open Dialog window (using CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG method). Using this I can given the file name and Open.
But, this File Open Dialog windows is not getting recorded using SHDB.
Please help me how to solve this problem.
Thanks in Advance,
Shashidhar

Hi,
I doubt you can record the file open functionality in BDC.
if there is any field which requries file path and directory better make it uniform and hard code it.
Regds,

Oracle BI Publisher - can not access Shared Folder , using Oracle BI Server

Hi there,
We have an installed OBIEE and BIP (BI Publisher) system which is the security setting of BIP using "Oracle BI Server".
Our OBIEE security is using the combination of LDAP (authentication) and Relational Table (for grouping user privillege)
The integration connection between OBIEE and BIP is successfull, and I can connect using Administrator to the BIP
But when I assign a general user using group : XMLP_Admin (define in rpd file and relational table), the user can log in to BIP, but can NOT access the Shared Folder.
the error desc : "Error 500: SRVE0199E: OutputStream already obtained"
Anyone can help ?
Thanks a lot
-toni

Did you define Roles and Permissions to the shared folder from BIP Admin?
-Prakash

File access problem while using BULK INSERT

I'm creating a script to automatically convert a large mess of data. Here's a test query I was using to bring a file into the database:
INSERT [ImportTestTable]
SELECT a.*
FROM
OPENROWSET(
BULK 'D:\TestFile.csv',
FORMATFILE = 'D:\TestStyle.fmt',
FIRSTROW = 2
) AS a;
SELECT * FROM ImportTestTable
I've used queries like this on other networks and machines before, but when I run that query on the particular machine I'm working with now, I get the following error:
Msg 4861, Level 16, State 1, Line 13
Cannot bulk load because the file "D:\TestFile.csv" could not be opened. Operating system error code 21
(The device is not ready.).
Here's some relevant facts I can think of that might help:
I am running the query from SQL Server Management Studio on a remote machine running Windows 7 Ultimate. I am connected to this server using SQL authentication. I believe we are on the same domain / network. I am not the DBA. I do
have the permission "Administer Bulk Operations" explicitly granted to me by the DBA. The user I am currently logged in as in windows is capable of opening, editing, and saving the file in windows explorer. The format file is a NON-XML
format file.
Any pointers as to where to look for more detailed information would be greatly appreciated!

I know this is a little old by now, but this is what I used just this week:
bulk insert [dbo].[Test_Table]
from 'C:\Documents and Settings\rshuell\Desktop\Test_File.txt'
WITH (
FIELDTERMINATOR=',',
ROWTERMINATOR = '\n',
KEEPNULLS,
FIRSTROW=2
That worked fine for me.
Of course, we Naomi stated, the file has to be ON THE SERVER. Or, if you're using an FTP site, for instance, the path would have to point to the FTP site.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

REVISED: How do I restore all my old files, apps, settings etc. using TM?

My Macbooks HD failed the other day and had it replaced so now everything is completely wiped out and had to reinstall leopard. Well before all this happened I had been using Time Machine so all my files are backup on my external HD. Will I be able to restore everything back to the way I had it before the HD failed?? If so how do I go about doing this? I'm having trouble doing it besides restoring one things at a time.
*Note: And I've already installed leopard. How can i do this? Like what steps would i take?
Please help. Thanks.

HelloLance:
The OS X help menu has detailed instructions (recovering your entire system). Enter Time Machine in the search window and scroll down.
Barry

Historical record of file access?

I have some files/folders that are disappearing(or relocating) on my server. AFP logs give you a pretty good view of who accesses what and what they did. SMB seems about useless. What about shell access and such? Does anyone know how I can track this regardless of protocol or method? Is there a utility out there or perhaps some log I am overlooking?
-Thanks in advance...
-James

Thanks. Helped me to narrow it down some more, maybe. Fact is - I can't even create INSIDE the webapp:
String s = context.getRealPath("/WEB-INF/") + "newsave.txt";
     File outputfile = new File(s);
     if(!outputfile.exists()) {
          outputfile.createNewFile();
}without incurring...
java.io.IOException: Permission denied
     at java.io.UnixFileSystem.createFileExclusively(Native Method)
     at java.io.File.createNewFile(File.java:850)
     at EchoServlet.doPost(EchoServlet.java:80)
Does this mean I have permission issues? Or is there something more basic I'm missing? (Believe me, it could be basic!)

File associations not roamed using Remote Desktop Server 2012 R2 Standard

Hello everyone,
As the title mentions, some File Associations does not seems to roam on a RDS 2012 R2 server. We use the following configuration:
Windows Server 2012 R2 Remote Desktop Server(s)
Roaming Profiles to a user based network share
Delete cached copies of Roaming profiles [Computer GPO]
So there is no local stored profile after logoff.
Exclude directories in roaming profile [User GPO]
We only exclude "$Recycle.Bin" for testing. So all other profile settings (Local, LocalLow, Roaming) should be roamed.
With the above settings, some associations are, after logoff and logon not remembered. For example .pdf is always restored to MS Word even if Acrobat Reader is chosen as default program.
When we do not delete the cached copy of the Roaming profile [Computer GPO], the file associations are remembered after logoff and logon.
We did a little of research:
When changing the default application for PDF files to Acrorobat Reader, the setting for this user in the registry is:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf\UserChoice
Hash: BTWAFQFaLiw=
ProgId: AcroExch.Document.11
After logging off, the NTUSER.DAT for this users does contains the same settings. I guess the settings are successfully roamed to the shared roaming folder.
But after login, the settings are set back to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf\UserChoice
Hash: mj3iGjB82bU=
ProgId: AppX86746z2101ayy2ygv3g96e4eqdf8r99j
My suggestion is these settings are not restored in the cached roaming profile.
Someone who recon this and knows if there is a solution for this issue?
Using a Association Configuration File (DISM) with the Computer GPO Setting "Set a default association configuration file", we can set the default program for the users. But this is a global Computer GPO setting and not all users must have the same
default programs.
Using this setting is no option for our environment.
Hope Someone can help us.

Hi,
For this you can make one separate group for all that users and applied the policy setting which you want to setup. But as per me, windows uses the Local and LocalLow folders for application data that does not roam with the user. Usually this data is either
machine specific or too large to roam. Maybe your thought would be a workaround.
More information.
Deploy Roaming User Profiles
https://technet.microsoft.com/en-us/library/jj649079.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Remote file access doesn't work with Mac and Q10

I'm running the latest BlackBerry Link (version 1.20, build 7) and Mac OS X (version 10.9) software on my Mac Mini computer.
I setup BlackBerry Link for remote file access.
On my Q10 in File Manager I see my Mac computer but for some reason I don't see any folders. It's just a black blank screen. My carrier is Telus.
In link I chose folders to access. It seems like everything is setup properly and I still see only a black blank screen on my Q10.
Any Mac users have this issue?

Me too. None of the sync functions/remote file access/wifi sync using BB Link are working for me. I have a Mac (10.8.5) and a BB Z10 (10.2.0.429). I hope BB comes up with a solution soon.

Posting multiple records from file to idoc

Hi Exerts,
i have done scenario to post one record from file to IDOC, to post multiple records from file to idoc what are the options to be modified in the scenario.
thanks,
dhanush

Hi Dhanush,
You need to change the occurance of idoc to 0 to unbounded ie need to opt idoc packaging.
Just download the xsd of you idoc to the desktop and change the occurance tag as "<xsd:element name="IDOC" type="COND_A.COND_A02" maxOccurs="unbounded" />" and then reimport it into External definition and use it in your message mapping and then map it with you source structure.
Regards,
Prasanthi.

HT2487 how do I clean my mac mini and get rid of old files and clutter please

how do I clean my mac mini and get rid of old files and clutter lease

Try using one of these applications to see what is taking up your hard drive space.
File Scanner - OmniDiskSweeper Requires 10.8 or better
File Scanner – Whatsize

Reading a record by key access.

Hi Gurus,
In 'read table' for reading a record by key access they have used 'comparing' , 'transporting' , 'assigning'.
Can you please explain me what exactly the above will happen with an clear example.
Thanks,
Prabu S.

mostly you wont need these
but still: from documentation:
READ TABLE - transport_options
Syntax
... [COMPARING { {comp1 comp2 ...}|{ALL FIELDS}|{NO FIELDS} }]
[TRANSPORTING { {comp1 comp2 ...}|{ALL FIELDS} }] ... .
Effect:
The addition COMPARING compares the specified components comp1 comp2 ... (or the subareas or attributes thereof) in a found
line before they are transported with the corresponding components of the work area. If ALL FIELDS is specified, all components
are compared. If no NO FIELDS is specified, no components are compared. If the content of the compared components is
identical, sy-subrc is set to 0. Otherwise it is set to 2. The found line is assigned to the work area independently of the result of
the comparison.
If the addition TRANSPORTING is specified, only the specified components comp1 comp2 ... (and their subareas) in the found line
are assigned to the corresponding components of the work area (or their subareas). If ALL FIELDS is specified, all the
components are assigned.
COMPARING must be specified before TRANSPORTING. The components comp1 comp2 ... are specified according to the rules in
the section Specifying Components. This is subject to the restriction that after TRANSPORTING, attributes of classes cannot be
addressed using the object component selector, and after COMPARING, this is only possible as of release 6.10.

File Created time changes when file renamed to previously used name

Any ideas on this one would be very gratefully received:
I am trying to rename a file then create a new one with the original name, as part of a solution to roll over log files after x days.
I found that the new file had the 'created time' of the original file, which messed up the logic badly. I tried to unpick this by creating the new file with a new name, then renaming it. The new file got the correct created time initially,
but as soon as I renamed it to the original name, the created time reverted to the created time of the earlier file.
I even tried simply deleting the old file altogether, but every attempt to get a new file with the original name resulted in the created time being that of the old file.
I have used different filesystemobject instantiations for the old and new files, and I even tried creating the new file in a different run of the script, and in a different cmd session. The only thing that worked was logging out and in again before
creating the new file!
Since the created time attribute is not writeable, I'm struggling to get round this.
Here is a stripped out version that demonstrates it. I have put 5 second waits in, so you can watch the created time get reset in front of your eyes when the new file gets renamed to the old name (might need to add a column for 'created time' to Windows
Explorer)
(OS is 2008 server R2 Enterprise)
$logdir = ".\"
$logfname = "roll.log"
$RollAtDays = 0 # for testing - so it always creates a new file
If ( -not ( test-path $logdir) ){ $newdir = New-Item $logdir -type directory }
$logfile = $logdir+$logfname
$newlog = $logdir+$logfname+".new"
$fso = New-Object -comobject Scripting.FileSystemObject
$date = Get-Date
# if file exists, test whether it requires rolling over
If ( test-path $logfile ){
$fo = $fso.GetFile( $logfile )
$dc = $fo.DateCreated
$RollDate = $dc.AddDays( $RollAtDays )
# write-host "$dc $RollDate"
If( $RollDate.CompareTo( $date ) -lt 0 ){
  write-host "Roll"
  $newPath = "$logdir$date-$logfname"
  $newPath = $newPath.Replace("/", "")
  $newPath = $newPath.Replace(" ", "-")
  $newPath = $newPath.Replace(":", "")
  $fo.Move( $newPath )
  #$fo.Delete( ) #tried both renaming and deleting the original file
  start-sleep -s 5
# some code to create a file if one doesn't exist
If ( -not ( test-path $logfile) ){
$header = "Date"
$fso1 = New-Object -comobject Scripting.FileSystemObject
$ts1 = $fso1.CreateTextFile( $newlog, $True )
$ts1.close()
start-sleep -s 5
$fo1 = $fso1.GetFile( $newlog )
$fo1.Move( $logfile )  # this is where the created date gets changed back
#add-content $logfile $header
# some code to add a line to the log
[string]$logline = "$date"
#add-content $logfile $logline

I have to disagree with the assessment that creation time is not writable:
Get-Item test1.txt | select creationtime
(Get-Item test1.txt).CreationTime = '07/03/2014'
Get-Item test1.txt | select creationtime
CreationTime
3/20/2014 1:15:43 PM
7/3/2014 12:00:00 AM
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Slow file access - moving toCIFs

We are using OES11 + latest Novell client
Some file access is EXTREEMLY slow
The same Server & Workstations with NO Novell Client installed and CIFs setup is MUCH, MUCH faster
Does login Scripts work in CIFs mode ?

Hi,
What are your NSS settings on your server?
I found that I needed to set the following:
Log in as the root user, then open the /etc/opt/novell/ncpserv.conf configuration file in a text editor. Add the following at the bottom of the file:
OPLOCK_SUPPORT_LEVEL 0
Ive also added: CROSS_PROTOCOL_LOCKS 1
The above is not effective immediately - I can't remember what services I had to restart!
Please let us know how it goes.
Cheers,

403 Error when access Table Storage using SAS token

I have Azure Mobile Service which has a custom API to generate a sas token for accessing Table Storage from Windows Store app.
I get following error in Windows Store app while accessing table storage using sas token:
Server failed to authenticate the request. Make sure the value of Authorization header is formed correctly including the signature.
Example of sas token generated:
se=2014-09-12T03%3A10%3A00Z&sp=rw&spk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&epk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&sv=2014-02-14&tn=Folders&sig=91c7S1QM0byNdM80JncwRribXqsWS1iKmOH8cRvHWhQ%3D
Azure Mobile Services API Code that generates sas token:
exports.get = function(request, response) {
var azure = require('azure-storage');
var accountName = 'myAccountName';
var accountKey = 'myAccountKey';
var host = accountName + '.table.core.windows.net';
var tableService = azure.createTableService(accountName, accountKey, host);
var sharedAccessPolicy = {
AccessPolicy: {
Permissions: 'rw', //Read and Write permissions
Expiry: dayFromNow(1),
StartPk: request.user.userId,
EndPk: request.user.userId
var sasToken = tableService.generateSharedAccessSignature('myTableName', sharedAccessPolicy);
response.send(statusCodes.OK, { sasToken : sasToken });
function dayFromNow(days){
var result = new Date();
result.setDate(result.getDate() + days);
return result;
Windows Store app code that uses sas token:
public async Task TestSasApi()
try
var tableEndPoint = "https://myAccount.table.core.windows.net";
var sasToken = await this.MobileService.InvokeApiAsync<Azure.StorageSas>("getsastoken", System.Net.Http.HttpMethod.Get, null);
StorageCredentials storageCredentials = new StorageCredentials(sasToken);
CloudTableClient tableClient = new CloudTableClient(new Uri(tableEndPoint), storageCredentials);
var tableRef = tableClient.GetTableReference("myTableName");
TableQuery query
= new TableQuery().Where(TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.Equal,
this.MobileService.CurrentUser.UserId));
TableQuerySegment seg = await tableRef.ExecuteQuerySegmentedAsync(query, null);
foreach (DynamicTableEntity ent in seg)
string str = ent.ToString();
catch (Exception ex)
string msg = ex.Message;
Exception:
Any help is appreciated.
Thanks in advance!
Thanks, Vinod Shinde

Hi Mekh,
Thanks for the links. I checked them and mostly they are due to date time on client and server.
But this is not the case in this scenario.
here is the Request and Response from Fiddler.
Request:
GET
https://myaccount.table.core.windows.net/Folders?se=2014-09-13T02%3A33%3A26Z&sp=rw&spk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&epk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&sv=2014-02-14&tn=Folders&sig=YIwVPHb2wRShiyE2cWXV5hHg0p4FwQOGmWBHlN3%2FRO8%3D&api-version=2014-02-14&$filter=PartitionKey%20eq%20%27MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2%27
HTTP/1.1
Accept: application/atom+xml, application/xml
Accept-Charset: UTF-8
MaxDataServiceVersion: 2.0;NetFx
x-ms-client-request-id: b5d9ab61-5cff-498f-94e9-437694e9256c
User-Agent: WA-Storage/4.2.1 (Windows Runtime)
Host: todoprime.table.core.windows.net
Response:
HTTP/1.1 403 Server failed to authenticate the request. Make sure the value of Authorization header is formed correctly including the signature.
Content-Length: 437
Content-Type: application/xml
Server: Microsoft-HTTPAPI/2.0
x-ms-request-id: 22c0543b-0002-0049-7337-da39f4000000
Date: Thu, 11 Sep 2014 02:33:28 GMT
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code>AuthenticationFailed</code>
<message xml:lang="en-US">Server failed to authenticate the request. Make sure the value of Authorization header is formed correctly including the signature.
RequestId:22c0543b-0002-0049-7337-da39f4000000
Time:2014-09-11T02:33:29.6520060Z</message>
</error>
Do you see anything different in this request/response?
Thanks, Vinod Shinde

Recording Streaming Audio Using Total Recorder in Vi

Last year I purchased High Criteria's Total Recorder to successfully record sounds over the internet, etc. Earlier this year I bought a new PC with Vista and onboard sound, and I?installed Total Recorder on the new PC. ?It no longer worked. I checked their website, but they weren't much help. They said to look for a "wave out" option in recording, but there was none. Thinking that it was the onboard audio causing the problem, I bought and installed an Audigy SE sound card yesterday. While it gives me a few more recording options, I still can't use Total Recorder. Cqan anyone please give me some suggestions as to how to make this work? Or is there another program out there to record streaming audio in Vista? Thanks.

Hi
Can you record using mp3 or wma -format (on 28kbps) with these tools you have? These formats packs wav data to ~/0 deal from original without huge quality loss.
If not you can try if there is some other recording tools. There are also freeware products on many SW sites like
http://www.download.com/Audio-Video/200-2025_4-0.html?tag=dir
http://www.winsite.com/
.jtp

Recorded old files access in UCCX using Calabrio recording server

Similar Messages

Maybe you are looking for