Recorded show not always playing back. New 2013 thread to ongoing problem

We have two Motorola QIP7232 2 DVR/Receivers. Since we got them back in March of 2012 we have had sporadic issues where programs that show to be recorded (30 minutes, 60 minutes, etc), won't play back.  The DVR simply reverts back to live TV as if we've canceled the playback. One receiver was replaced in April 2012 but the problem still continues off and on to as recently as of this post.
This happens on BOTH receives. Neither receiver is even near capacity. Maybe 20% at the most at any time.  Since we've had a receiver replaced - and it continues to happen on both DVRs - and there's another three year old thread full of the same complaint, I can only assume it's either defected equipment or defected service.
Verizon? Any answers?

I have had the same problem on the Cisco 435hdc box and an external dvr for months.  Fios tech just had me run the autofix which I had already tried and this didn't help.  It happens randomly and is very annoying.  It also happens when I record a show and want to watch it from the beginning while it is still recording it.  It does not allow me to watch from the beginning of the recording it only goes back about 30 minutes.

Similar Messages

  • When I chose the GPU Acceleration on my general settings I only get audio and not video play back

    It has been extremely frustrating for me because my computer can render files fast just couldn't read the graphics card I had so I had to unlock it. I am hoping someone on here has done something similar to help me get this to work because the only thing that I am having trouble with as far as when it is on software only is on play back. I kept dropping several frames and it was really frustrating me. I think I may have found why I am having this problem and hope someone on here can help me out.
    15. Now just add the name of the card between the “Renderer string:” and the forward slash “/” to the cuda_supported_cards.txt file.
    This was on of the steps that I did not understand and could be the reason why it is not working properly because I did not know how to do this.
    Like I said it is letting me switch to the GPU Acceleration mode just not letting me see any video on anything in cs6.
    This is the link to where I learned how to get premiere cs6 to read my graphics card http://www.studio1productions.com/Articles/PremiereCS5-2.htm
    I have a GeForce GT 525M graphics card and according to that site I can get premiere to read my graphics card to help me playback without dropping frames.
    I also installed the latest driver so that can not be the issue as of now. If you know the answer please help this is very frustrating.
    Thanks!

    See http://www.nvidia.com/Download/index.aspx

  • "Audio Record Path Not Found" error and new details

    I've been having problems opening up older GarageBand files I've created and trying to add new content. When I try to record on an existing track, or in a new track, I get the error: "Audio Record Path not Found! Please enter it in the following dialog." (and there's no following dialog). I've tried to save the file as an archive, which has worked in the past, but doesn't work any longer. I'm using a MacBook Pro Core 2 Duo 15"
    As a test, I installed iLife 06 on my older (PowerPC-based) Mac Mini. On that computer, I'm able to open the files, and record onto an existing track. None of my recording equipment is attached to this machine, however. If I save an archive and move it to my macBook Pro, I'm still not able to add recordings to it.
    I tried reintalling GarageBand on my MBP, but I still get the same error. I've also deleted the preference files from Library > Preferences. (the two com.apple.garageband... files), and still no luck. It doesn't sound like the audio files themsleves are corrupted since I can open them on the Mini, so it's likely GarageBand. What else can I delete to make it a pristine installation?
    I don't want to use my Mac Mini for recording, as it's too slow for my editing needs, but if I can't open the files on my MacBook Pro, I'll have to re-record them.
    Anyone have any ideas I can try?

    Excellent suggestion! I actually left the files on the external USB drive on which I store them, and accessed them from my MacBook Pro (instead of moving the files to the MacBook Pro), and sure enough, I'm able to edit and add to the files!
    I still don't know why I can't access them locally on the MBP, but this workaround is certainly acceptible for my needs!
    Thanks out to everyone who helped on this thread!
    Brian Ibbott
    Coverville.com
    The Cover Song Podcast

  • Record audio clip and play back it into media player

    how can i record voice clip using java application and play back it with media player.

    870902 wrote:
    how can i record voice clip using java application and play back it with media player.1) Record from "javasound://0" using a Processor / DataSink
    2) Play back the file from 1 using a Player

  • How to record simultaneous datalines each playing in its own thread?

    Hi,
    I have a program where multiple tracks of audio play simultaneously. Each track plays in its own thread to its own sourceDataLine. If I wanted to write all sourceDataLines currently playing to a file, how can I go about this?
    Is there someway to access the central point all of those sourceDataLines are going through and grab the data from there?
    Thanks,
    John

    jmljunior wrote:
    Is there someway to access the central point all of those sourceDataLines are going through and grab the data from there?Ummmm, if your sound card supports loopback capabilities, you could simply record the system mixer and you'd get exactly what was played over the speakers...

  • Relatively new to Logic Pro.  When I'm trying to punch/record into a track, I can't hear the previous existing track until I'm recording.  But, it plays back fine.  I'd just like to hear before the punch in.  Help? Sounds like a preference thing.

    Logic Pro 9

    It sounds like you may have toggled the input monitoring - there's a little button with an 'I' on it on the track header which toggles monitoring between what's been recorded and the actual input on your sound card. If it isn't there, right (or cntrl) click and choose 'Configure Track Header' - you can add it in the selections that appear there.

  • Mixed file formats in timeline not always playing nice.

    Im using the latest version of premiere pro cc, and one of the great things about PP CC is that you can drop any file format in the timeline without trancoding it right? BUT! sometimes it doesn't play well when you add effects or titles, or adjustment layers. Lets say I have a 1080 DSLR timeline and I have a mix of H.264,ProRes and MP4 footage. When the footage is in the timeline with no effects, the playback is fine, but when I add a transition, a title or a adjustment layer over the footage, when it plays over that section, the footage sometimes stutters, or plays choppy. The footage will pause for a few frames an then continues, BUT only does this when effects are applied. Its behaves as if there is not enough frames to accommodate the transition or effect, which is not the case. But if I delete the clip and drop it into the timeline again in the same spot or I adjust the length of the transition the clip will play with no issues. Why is this happening? And yes ALL footage is rendered and I have powerful enough system to handle the work. Such simple effects should not affect timeline playback.

    Hey Jim, with all do respect the symtoms may suggest that, as you stated but I know I have a powerful enough system. Im running a 8 core mac pro, 22gig ram,SSD drives and Radeon 5770 card. I have edited RED footage and Canon C500 footage with dynamic linked After effects on my system with no issues. So im certian its not my system.

  • After latest security update Safari 5.1.9 (OSX 10.6.8) is not always going back to the preceeding page even the the URL is the correct page.

    On several different occassions, I have hit the back button on Safari and it goes baack to a page several sites earlier.  The URL displayed is the correct one (the one preceedin the page), but the page is not the one that the UL is saying it is - sometimes it is an entirely different domain.  Any ideas anyone?
    Sass

    With Safari open, press Command + Option + E on your keyboard (empties the Safari cachee) then quit and relaunch Safari to test.
    If that helped, empty the cache more often.
    BTW, the Safari 5.1.10 update is available for download > Safari 5.1.10 for Snow Leopard

  • HT3523 I have done all my updates & my quick time will not play this new project, what is the problem?

    My computer is updated but my quick time will not play a mov. file that i exported from final cut on a different Mac , what is the problem?

    Final Cut adds some codecs that are not part of normal OS X.  If your movie uses one of these codecs it won't play on a system that does not have Final Cut.
    Adding these codecs may help:
    <http://support.apple.com/kb/dl1396>
    If not, ask in one of the Final Cut forums:
    <https://discussions.apple.com/community/professional_applications>

  • IPhone 5 will not always play a tone when I get mail

    I get intermitting alerts on email messages.  Sometimes I get the alert tone and sometimes I don't.  Any ideas.

    Hey ebe301,
    Sorry to hear about your troubles with your PC. If you are not seeing your iPhone on your computer, then take a look at the link below to walk you through getting that working again. It will have you verify that drivers are installed and working as well as any third party software that may be causing conflicts. 
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    https://support.apple.com/en-us/HT204095
    Take care,
    -Norm G.  

  • ITunes 7.0.1. did not fix play back problem through AirTunes

    The sound quality in Airtunes is every bit as bad under the update (7.01) as it had been before (7.0). I cannot listen to my music, the static is so annoying. I hope they get it right soon.
    IBookG4   Mac OS X (10.4.7)  

    Did you check you have IPV6 on in the network interface settings ?
    You have to have it on or else AirTunes won't work.
    I think it has to do with the iTunes Airtunes internal streaming server which uses IPV6 now, which is a good thing , network wise. But Apple didn't document it correctly , IMO.
    I sure can vouch for the same airtunes quality using 7.01.
    I have a pretty expensive audiophile setting connected to my airport express optical out , and the quality has suffered nothing.
    This sure is strange.

  • Scrolling with the mouse wheel does not always work with 4.0? Never a problem with previsous versions.

    in firefox 4.0, at times the scrolling wheel will not work. It has never been a problem with previous versions, and always works in internet explorer.

    Hello Henry,
    Thanks for the hint!
    My mouse wheel is  working, but not in flash player...strange... It is a Microsoft Comfort  Mouse and I see there is already logged bug about that: https://bugs.adobe.com/jira/browse/FP-5145
    Anyway besides this bug, there is an additional issue I think, that the vertical layout does not calculate properly the vertical scroll position, when certain elements are excluded from the layout. I have described this additionally in the Jira.
    Regards,
    Dinko

  • When loading yahoo home page, back/forward arrows on top stories are missing( I do not mean toolbar back/forward) Don't have same problem when opening thru ie, or aol

    no further info

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • The hoverover actions are not playing back correctly always

    Hello,
    I am developing manual test scripts using MTM2013. I see that hover over actions doesn't always play back correctly. The application has two levels of hover over levels in the sense i have to click on main hover over link which has multiple hover over links
    and then several links for the second layer of hover over links.
    Any suggestions on how to record and payback correctly consistently.

    Hi Starain,
    First of Thank you very much for looking into it.
    I have following features on Data Diagnostics on.
    1.ASP.NET Client Proxy for IntelliTrace and Test Impact and Intellitrace.
    2.When trying to configure ASP.NET intellitrace and test impact, it gives this message.
    3.When MTM gives that exception and gives option to close, it doesn't capture anything.
    4.I went to view Results for the test, i don't see anything captured.
    5.Can you tell me where is this Even viewer you are mentioning to look into?
    6.In mtm log file, I have configured as below as i have mentioned in another thread. Do you still recommend to go into the blog you mentioned above and set up as given in that.
    Please confirm that i ahve to still set uptrace file as mentioned in blog given in above thread and iwill go a head and try it.
    <system.diagnostics>
        <switches>
          <!-- Trace settings for MTM -->
          <!-- Change the value to change the level of tracing you want.
                You must use integral values for "value".  
                0 ==> off,
                1 ==> error,
                2 ==> warn,
                3 ==> info,
                4 ==> verbose.
                Note that each value is inclusive of the last.
            -->
          <add name="UITestTraceLevel" value="4" />
          <add name="EqtTraceLevel" value="4" />
          <add name="TestManagement" value="4" />
          <add name="TeamBuild" value="4" />
          <add name="TeamFoundationSoapProxy" value="verbose" />
        </switches>
        <trace autoflush="true">
        <listeners>
        <add name="myListener" type="System.Diagnostics.TextWriterTraceListener" initializeData="C:\temp\MTM_Trace.log"    />    
        </listeners>    
        </trace>
      </system.diagnostics>
    </configuration>
    Thanks again.

  • Lync recording does not play

    Hi there,
    I tried to record a meeting using Microsoft Lync 2013. The file was moved from its default location to a different computer but it could not play. I tried to play it again in the original location but it does not play in any media player. 
    I have a backup of the recorded file. Could someone help me in how recorded file can be played back?
    Many thanks for your kind assistance.
    Fekadu

    Hi,
    Was the issue about file couldn’t be open or the recording could be open but with issue (such as without voice or no content)?
     You can try to use Microsoft Lync Recording Manager, click the item and click Publish. Then try to open it with Microsoft Lync Recording Manager to check the issue again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for