Recorded Software Simulation-Comes out strange in preview and published format

Hi friends!
I have just uploaded my captivate files to the following sitehttp://www.blcstudents.com.au/tutorials/learn.html
I was creating some projects and the first project called 1demo, works, both as an SWF and as a normal cptx(version 5).
It can be view and run correctly.
The other demo files I did after that do not work, and if you view the result called swf 2demo, and 3 demo as swf files, on the webpage above, you will see my problem. I inlcuded the cptx files  so you can download what i have done and see the result.
As single slides, or 5 slides at a time they play fine, hwoever when I publish them as a project they go strange.  I do not have any unusual settings, just the default ones  set. screen size of 1024 by 768.
Any thoughts would be very much appreciated.
Cheers all,
Benny.

Every Flash SWF gets published for a particular Flash Player version (8,9,10 etc) and an ActionScript version (2, or 3).
So if your Flash file was created with CS3 there is a very good chance that it was published for ActionScript 2 and that is what is fouling up your Captivate movie.
Try removing these Flash files from the content and republishing to test whether this is causing the issue.
If you still get the issue when there are NO SWFs included that were not created with Captivate 5, then you need to look at other elements that might also be AS2.  For example, your SKIN and Playback bar are also actually SWFs.  If the Skin and bar originated from an earlier version of Captivate that was published for AS2 then they may need to be removed and replaced with one of the skins and bars that came with Cp5.
Preloaders are also SWFs.  Remove the current preloaders as well.
I've never seen this particular issue occur UNLESS there was some AS2 element fouling up the project.  Find and remove that element or elements and you should be fine.

Similar Messages

  • Recording Software Simulation using Epiphan VGA2USB

    Hi,
    Can someone help me with an answer for the below question:
    I have one question : How can we Record Software Simulation in Assessment mode in the following scenario :
    1.laptop 1 has Adobe Captivate installed and is the source recording machine
    2.laptop 2 has the software for which the recording and simulation needs to be done but this does not have captivate.
    3. We use Epiphan's VGA2USB device to perform screen capture from Laptop 2 to Laptop 1 using Epiphan Capture Tool software.
    My Question is : How can we get the clicks done on Laptop 2 be recorded using Captivate on Laptop 1, so I can capture the recording in Assessment Mode.
    Thanks
    Raghu

    Hi Raghu,
    Firstly, we do not recommend to record a different machine using a remote client, as there could be issues with latency.
    If both machines are in same domain/intranet, you can use the Remote Desktop Share and while recording choose an application to record from list as RDP Service, readjust the recording window and start capturing.
    Captivate would capture the events from Application listed which in this case would be RDP, I have not personaly used VGA2USB, if it can recreate a similar scenario you can test that as well.
    Thanks,
    Anjaneai

  • Ipod touch 4g - sound comes out one earphone loud and the other softly. I've tried other headphones with same result. is there a fix for this ?

    Ipod touch 4g - sound comes out one earphone loud and the other softly. I've tried other headphones with same result. is there a fix for this ?

    Clean out/blow out the headphone jack. Insert/remove the heaphone plug a dozen times or so
    Try the following to rule out a software problem:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store since it appears you have a bad headphone jack
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours
    Apple - Support - iPod - Repair pricing
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones

    I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones
    The problem occurred a few days after I had updated to iOS 7.02

    Hey Tahls23!
    I have an article that can help you troubleshoot that issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    No sound through stereo headset
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

    when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
    please can anbody help or advise?

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • My iMessages sent from my mac pro doesn't come out on my iPhone and ipad

    hi ! imessages sent from my macbook pro doesn't come out on my iphone and ipad, any leads on how to address this?
    thanks

    Associate your mobile number with your Apple ID, if you haven't already done so:
    Apple - My Apple ID
    Sign out of iMessage on the Mac:
    Messages ▹ Preferences ▹ Accounts ▹ Sign out
    Sign out on the iPhone
    Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap Use Your Apple ID for iMessage.
    Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions. See:
    iMessage stopped syncing between...: Apple Support Communities
    Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com.

  • Preview and Publish Problems

    When I only have a few slides in a Captivate file - it will
    preview and publish fine. When I have more than a few slides in
    Captivate it will only preview and publish the first few seconds of
    each slide.
    Help!

    Welcome to our community, Allison
    Can you give us more detail?
    * How many slides total are we talking about?
    * What are you seeing that is telling you that only a few
    seconds are there?
    * Do the slides show then disappear? Or do they pause and you
    don't see the rest if you click somewhere?
    * How did you record? (Demonstration, Simulation, Full
    Motion)
    Hopefully with more information we might offer suggestions...
    Rick

  • Losing links of images on Preview and Publish.

    Some images are not linking on Preview and Publish (Beta7). I have relinked (even going back to the original in Photoshop) and re-published again, those link up but then other images stop linking and do not load. Ones that were working fine just minutes ago.

    Hi COLBY,
    Here is the link to a recently published site. On the Publish I did about 30 min. before all the images were loading. Now on this page two are not. When I wrote the question yesterday 6-7 images were missing, randomly. One than publish again three, than more. Since yesterday I went back to a earlier saved version and made some minor type changes and links, not involving any of these images. The first time I published today, all the images were linked. It seems the longer I work with the file the more images seem to disappear. I have only had this problem since I updated to the Beta 7, on Friday. http://amberart.businesscatalyst.com/cockroaches.html
    Thanks.
    Linda Nye

  • Navigation not previewing and publishing as designed

    When preview and publish, the navigation gets spaced out vertically too much.

    Hi,
    Please provide us the site URL to take a look at.
    Regards,
    Aish

  • An swf file does not show up in the website even though you can see it in preview and publish

    I created a swf file from a mov file in Adobe Encoder. Thge movie shows up in Muse in both the preview and publish mode.
    Does not show up in the webstie. The html file is in the assets foder and the swf file is in the image folder and the space is blank.
    When i encoded the .mov file I saved it as FLV. Web 1920 x 1080, 16 x 9 5.4 Mbps is the setting for Flash Web Video when i encoded the file.

    To see all the History and Cookie settings, select:
    * Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
    * Tools > Options > Privacy > History: [X] "Remember download history"

  • Getting Accessiblity Error Message before Recording Software Simulation...

    In Captivate 7, I go to start a brand new software simulation (chrome screen) in OSX and I get the following error message:
    Before recording application applications, select 'Enable Access for Assistive devices' in 'System Preferences' > 'Accessibility'.
    The pics below show the red screen capture box and the error I get when I try to capture when trying to capture the screen. Also included is a pic showing accessibility is enabled.
    I have no idea where this is coming from.

    ...and here's the answer:
    http://captivatecrazy.blogspot.com/2014/01/record-new-software-simulation-in-adobe.html

  • Captivate 4 will not record software simulation with Windows 7

    Hi,
    I have a Dell M6400 labptop, 32-bit, operating system is Windows 7.  The patch I downloaded through Help->Updates-> on Captivate fixed
    my microphone problem, but did not help the software simulation problem.
    I get as far in the process as having the screen setup with the red bounding box and controls visible.  After choosing automatic I then click on the record button.  There is a shutter sound, but it won't save anything.  I get back to Captivate and it has not recorded anything.
    I then installed it on my main computer which is 32-bit and uses windows xp.  I did exactly the same thing as my above mentioned laptop and it did the software capture beautifully.  So it must be the Windows 7.
    I am disappointed that the patch didn't fix that.  Will one be coming soon that will?

    Okay, I have been trying to use Photoshop CS4 Extended as my software simulation.  It refused to work on Captivate 4
    numerous tries, but now for some reason it is working fine.  The only thing that I did different was to go into Photoshop's
    preference-->performance--> and the openGL was unchecked and I checked it.   I think that Photoshop had a problem and turned off the
    the openGL.  I have the latest update for my graphic card, so I'm not sure why it affected the GPU.
    I didn't think to try other programs, but now I have, and they are working fine too.
    It could be that the problem was with Photoshop instead of Captivate.

  • GIF comes out strangely pixelated with noise, never seen this before!

    Everytime I export my animated GIF in flash it comes out in this weird pixelated way. Instead of everything being normally pixelated where they are just not as sharp, they come out with what looks like noise speckles all over them. The kind of noise that is not monochromatic. I have no Idea what this is or how to fix it and I have a client waiting for his web banner. I thought at first it was because I was using imported PNG's to make the GIF, but then I tried just making it in flash and it is still happening. I have played with every publish setting offered and I cannot make it clear, please help me!

    Why do you want to change it to a png for placement? Just place it as the original .ai eps file you got. You never want to use a jpg, png or gif in a document that's going to be printed. The minute you change it to a png or jpg you're going to lose resolution. That's why it's pixelated

  • Exports come out with blocky titles and shifting pixels, doesn't match previews.

    OK i have 720x480 29.97 footage which I imported and dragged a clip down to the new item icon to make an appropriate sequence. I created titles which ended up looking blocky in the program monitor for some reason. I then made a 1280x720 sequence for the heck of it and it turns out the titles look fine in those in the program monitor. I went to export and it looked fine in the render preview as well, but the final export in 720 (480 footage placed into a 720 timeline and exported as 720 in BOTH 29.9 and 23.9) and titles looks horrible. So deos the video itself, the pixels are jittery (Expecially in a shot with roof shingles for example).  I am looking at the export settings and have no idea what could be going on with this.
    To add to this, I have actually exported version of this project in the past just fine. I am just doing something new to it and am now just facing these issues. I successfully exported all sorts of ways in the past.. I have brouhgt it into a sequence fit for the footage using the new item icon, and exported out as both 720 and 480 in 29.9 and 23.9, even burned to dvd in Encore and it played fine.
    Im not wrapping my brain around how suddenly titles can look like blocky garbage in a 480 sequence, or why the render previews arent matching the actual output. any adivce here appreciated.

    OK i have 720x480 29.97 footage which I imported and dragged a clip down to the new item icon to make an appropriate sequence. I created titles which ended up looking blocky in the program monitor for some reason. I then made a 1280x720 sequence for the heck of it and it turns out the titles look fine in those in the program monitor. I went to export and it looked fine in the render preview as well, but the final export in 720 (480 footage placed into a 720 timeline and exported as 720 in BOTH 29.9 and 23.9) and titles looks horrible. So deos the video itself, the pixels are jittery (Expecially in a shot with roof shingles for example).  I am looking at the export settings and have no idea what could be going on with this.
    To add to this, I have actually exported version of this project in the past just fine. I am just doing something new to it and am now just facing these issues. I successfully exported all sorts of ways in the past.. I have brouhgt it into a sequence fit for the footage using the new item icon, and exported out as both 720 and 480 in 29.9 and 23.9, even burned to dvd in Encore and it played fine.
    Im not wrapping my brain around how suddenly titles can look like blocky garbage in a 480 sequence, or why the render previews arent matching the actual output. any adivce here appreciated.

  • How do I capture software simulations when having to switch back and forth between applications?

    Working with service reps who use multiple systems to complete an order. Need to know how to guide them in the use of Captivate 8 to produce a software simulation that includes the entire process.

    Hi there
    It sounds as if you might be thinking that Captivate typically records a single application. Certainly it *CAN* work that way, but it also can record just an area of the screen. This is what I'm thinking you are wanting in this case. Just define an area of the screen (possibly even the entire screen) and record that. Then your reps can move between applications.
    Cheers... Rick

Maybe you are looking for