Recorded Videos Have No Audio

Lumia 920 running Amber
As above, have noticed that videos recorded recently have no audio, but I have older videos that do have audio.
I have tried making some test videos to see if I was blocking the microphone but this is not the case.
Can anybody tell me how to fix this, and more importantly, if I can restore the audio to the videos I've already recorded.
Thanks

There was an issue reported with this since last month and as far as i know an update has been released,have you the latest software and how old is your sim card you are using now?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Recorded video has no audio

Hi, i have lumia 1020, the problem is that the recorded video has no audio. It worked for the first 2 video i have made . But it doesn't anymore.I have done a factory reset. But it still not working. The sound is not recorded anymore.
Is there a way to solve this problem.
Thanks !

Hi gent123,
This is for a Lumia 925, right? When did this issue start to happen? Did something happen to your phone prior to this issue? Are you also experiencing the other issues mentioned above, like issues with voice commands and audio note recording? What troubleshooting steps have you tried so far?
The video audio is captured by the phone's secondary mic, which is located on the top of the phone, beside the headset port. If you have a phone cover that might block the secondary mic, try removing it for a while and see if the audio will be captured when recording videos. Try also to reboot the phone by pressing and holding the volume down + power keys until it vibrates and restarts.
Make sure that the phone's software and system apps are updated as well. Check this link for steps on how to verify if the system apps are up-to-date: Nokia Windows Phone 8 App Updates.
Let us know if this information helped you.

Converted videos have no audio??

I converted my videos to be formatted to my ipod but when I tried to listen to it the music video had no sound or audio at all.
When I play the video on itunes it doesn't have any sound either but the unconverted video does have audio?

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
but there are other applications besides MPEG Streamclip you can try as well.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-ipod-vi deo-conversion-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

Recorded programs have no audio and clock out of s...

Hi
I have had Vision box since May and have recently moved into a new home taking the service with me. At my previous address we had no problems whatsoever with the service.
It's been one month since moving home and It's been a disaster.
I used the online change of address tool which seemed fine but upon moving in and setting up my box, BT had cancelled my subscriptions leaving me with just the freeview channels. I have since made a number of calls and thankfully this problem has been resolved.
Unfortunately a new problem has arisen, all my recorded programs have no sound. The video playback is smooth but we can't hear anything.
The clock has also bizarrely decided to stop working!?
Getting a bit fed up with it all to be honest.
Any help would be great!

Hi Kyebuff,
Thanks for posting and welcome to the community forum!
Sorry for the problems you're having with the sound on the content you recorded on your BT Vision+ box. We'll need your details to help get you sorted from here.
Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Videos have no audio

I got my new ipod video for christmas and i just started using it. I figured out how to manually load songs onto it and converted a music video to the ipod format. When i converted it the video had no audio...any suggestions?? PLEASE?!?!?!?

Welcome to Apple Discussions!
This is because the video you converted was muxed. See this for more info...
http://docs.info.apple.com/article.html?artnum=302588
You would have to use a converter that supports muxed videos such as:
http://www.squared5.com/
btabz

Screen recording-video pauses while audio continues

When I make a screen recording, the audio and video are playing perfectly (I use soundflower for the audio). However, when I go to watch my screen recording, it starts off like normal but about 30 seconds into the video, the video pauses while the audio continues playing like normal. Any reason as to why this is happening? I'm not just recording my screen but also a video from a website, don't know if that makes a difference.
Thanks

I am having the same issue I posted this elsewhere
I have a Mid 2010 Mac Mini Server (full specs below) and very recently it has developed a strange problem. I'll be watching something on iTunes and the video will stop but the audio continues. If I move the mouse and click on the screen the video suddenly plays very fast untill it catches up with the audio and then for a while it will play normally. I can go through this process 3-4 times an hour before I give up and stream to my iPad instead.
in the beginning it only happened when I was using the HDMI cable but recently it happens when the mini VGA adaptor is plugged in too.
its beginning to be very frustrating so any help would be truly appreciated.
thanks
James
Mac Mini Specs
Intel Core 2 Duo 2.66 Ghz
8GB Ram
Running Lion Server 10.7.2 (111C74)
ITunes 10.5.2

Ffmpeg records video only, no audio

I'm trying to record my desktop (or single programs) with ffmpeg. The video quality is okay (would be better, if I had a better pc, I guess), but somehow, I cannot record any audio. I did it with
$ ffmpeg -s 1280x1024 -r 30 -f x11grab -i :0.0 -acodec libmp3lame -ab 128k -vcodec mpeg4 -sameq -y testtestaudio.mp4
or
$ ffmpeg -s 1280x1024 -r 30 -f x11grab -i :0.0 -acodec libfaac -ab 128k -vcodec mpeg4 -sameq -y testtestaudio.mp4
but I always get a result like that:
video:9956kB audio:0kB global headers:0kB muxing overhead 0.036333%
which means, that ffmpeg didn't record the audio output.
I don't know where to start to get the audio problem fixed. Has anyone a similiar problem or does someone know, why it does not record? Do you need any more information from me?

I already sended ChemBro my script via e-mail but it might be also interesting for someone of you:
# -V0 means verbosity level 0 for the rec command of SOX.
/usr/bin/rec /home/hb/t_game.wav -V0 &
/usr/bin/ffmpeg -f x11grab -y -r 15 -s 864x640 -i :0.0 -vcodec huffyuv /home/hb/t_game.avi
#/usr/bin/ffmpeg -f x11grab -y -r 15 -s 688x544 -i :0.0 -vcodec huffyuv /home/hb/t_game.avi
#/usr/bin/ffmpeg -f x11grab -y -r 15 -s 688x544 -i :0.0 -vcodec mjpeg /home/hb/t_game.avi
# Do a hard kill for rec after ffmpeg's X11 recording session has ended
killall /usr/bin/rec
/usr/bin/mencoder -ovc copy -oac copy -audiofile /home/hb/t_game.wav -o /home/hb/game.avi /home/hb/t_game.avi
rm /home/hb/t_game.avi
rm /home/hb/t_game.wav
You have of course to adjust the output path for audio and video. I couldn´t make rec really "silent" and you´ll see the volume meter being written to the console. Not nice but it works....:D

Built in mic and isight records video but no audio- what happened?

Hello everyone,
My iMac won't record audio for iMovie. I have done this before; but now tried adjusting settings etc but still nothing. Sound comes out (Garageband, itunes, alerts etc), and sound goes in (Garageband; no problem) but it won't work for iMovie. Any suggestions? Thanks!

Hi
I would go to the Apple menu (top left corner)
Then down to System preferences
Here select Sound
See if Sound in is set to Line or internal mic.
Yours Bengt W

No sound when recording videos

Hi,
I m facing problem with my lumia 820, it's not recording sound with videos. When video is played, it gives buzzing sound. Its similar for any App which uses MIC for sound recording....
Any help.

Hi, TejinderPS. Did something happen to your Lumia 820 before this audio issue came up? Do you also experience the same thing during calls? Are you being heard by the person you're speaking with?
If your phone has a body cover that might block the microphone, try removing it and see if the you'll be able to record videos with clear audio quality. You can also try rebooting your phone by simultaneously pressing and holding the volume down and power keys until it vibrates and restarts.
Let us know how it will go. BTW, congratulations on your first post!

After Effects rendering the video with the audio out of sync

so, the thing is, i did the animation on flash, exported it, put it on after to edit audio and what not, everything looks fine, previews are good, so, lets render!... every time i render the final video have the audio out of sync, specially the audio that is already on the first video. the video its originally on 12 fps, if i change the interpretation to 24fps, everything get worse. any help?

ok, both Flash and After effect are CS6, i have a Lenovo Ideapad, can handle 64 bits
first i exported the video on .MOV from Flash CS6, without any problems
Then i finished the edition on After Effects, everything look good.
i have tried to render it on MOV, AVI, MP4 and the audio for the video that was exported from flash always get out of sync. i dont really move anything else

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

HT1267 i have purchase an iphone but no audio and video are available with it .can i record video and audio by this device

i have purchase an iphone. but no audio and video are available with it .can i record video and audio by this device
<Personal Information Edited by Host>

Hello JessCastle,
Start with the article below to troubleshoot issues with the microphone on your iPhone. If none of it works then contact Apple Support to further help you out.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Take it easy,
-Norm G.

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

Just Static Instead of Audio When Recording Videos

Just updated to 4.1 and no dice. Whenever I record videos it does not record audio as well, just static. When I first had the phone it worked fine. I've read other forum posts about it and not found anything useful to attempt. Fairly annoyed that I spend $200 and have to put up with crap like this. I'm taking it to an Apple repair place today to see what they can tell me. Hopefully it won't be that, "It just works," because quite apparently it does not.

I use a PC for syncing, not sure what you mean by create a new user. I took it to the local Apple Authorized Dealer/Repair place yesterday (the nearest Apple store to me is in Orlando, about an hour's drive) and they informed me that I would most likely have to A: Send it back, B: Take it back to Apple and get a new phone.
I'm fairly certain it is a software issue though, just from my experience in audio technology. The more I listen to it, the more I realize it's actually hiss and not static. Something like you'd get if your preamp was turned way down on a mic, but your main's were at 100%. You get all that low-end hiss and crap that's normal covered up by the audio, and the audio itself is very faint. It seems like it also might have something to do with the bluetooth setup too.
I'm still fairly surprised that this issue is not being addressed by Apple directly. With as many PR disasters as they've had with this phone you'd think they would try and head something like this off at the pass. Oh well...

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

Recorded Videos Have No Audio

Similar Messages

Maybe you are looking for