Recorder Error - no frames captured

I am running the trial copy of PE 10 on Mac OSX 10.7.2. My old Panansonic DV is connected through the firewire port and is recognised as device control is working. Project settings are for DV PAL 25 fps. When I play the camera no video is seen in the preview screen and when I try and capture I get an error message on hitting stop that says 'Recorder Error, no frames captured'. I have used the same set up with iMovie 11 and the dv is captured without problem.
I'm more of an Adobe user than an iMovie or iPhoto person so would like to use PE10 if I can get this issue resolved.
Any suggestions most welcome

DV via Firewire is absolutely perfect for PRE so what you describe is unusual. Using the same cable does iMovie capture the footage? If not it may just be a dodgy cable or connection.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Recorder Error Message when capturing from camcorder

How do I overcome the Recorder Message "Date/Time recorded not found on tape and is required for scene detection". The tape concerned does have the date & time the clips were recorded shown on the camcorder screen when viewing tape playback. I have successfully downloaded the clips from the camcorder onto Windows Movie Maker. The camcorder is a new Panasonic NV-GS330 and the instructions for it advise that clips are downloaded onto a PC via a USB 2 terminal and to use the enclosed USB cable. I have complied with this. Note I can successfully download photographs into photoshop from my digital camera using the same USB. My PC uses XP home Edition with SP3, 512Mb Ram.

I am having the same error message, however the circumstances are different.
I have a Panasonic PV-GS400. One of the reasons I bought this DV camera is it's ability to be used as a digital "pass-thru" recording device for analog content from a vcr/analog camcorder, ect.
This way, I can use that function to directly record analog tape right to the PC rather than having to copy it to the DV camcorder first then copying to the PC.
Here is the catch... Everything is working fine as far as both camcorder settings being correct, all cables correct and when I playback the analog camcorders content, it indeed is being passed thru the DV camcorder AND IS BEING PLAYED PROPERLY IN THE ADOBE CAPTURE WINDOW. Audio and all.
But I CANNOT press the get video (record button). When I do, it wants to record the tape in the DV camcorder, so I removed the tape. But it still wont allow me to record what is being displayed in the capture window, even though it is playing (previewing) BEAUTIFULLY!!
I just need to be able to record what is playing in the window!

CS4 on Dual Core MacBook Pro...Unknown Recording Error?

Hello! I am getting the "Unknown Recording Error" when I capture from my Analog-DV Bridge. It will record for a few minutes, then give the error. Recording quality for what it does record is perfect. Any ideas? Thanks!

Use Scenalyzer for DV capture.

Unknown recorder error

I have been using elements 3.0 for some time. I installed 9.0 and have been getting an unknown recorder error on DV capture. I decided to uninstall it, and went back to 3.0 and now have this problem on this program. Any Ideas? XP PRO SVC PK 3, Pentium D 2.8G, 1 GB Ram, 7200 RPM Sata Raid 0.
Firewire, sony mini DV camera.

Sounds like you may be out of contiguous hard drive space.
How much free, freshly defragmented space is on your C drive? You'll need at least 20-30 gigs -- and it should be free of tmp files and spyware. (The regimen I recommend in the FAQs and in my books will show you how to do that. http://forums.adobe.com/thread/390602?tstart=30 )

"Recording Error: Recorder Captured No Frames"

Hi all,
I'm very frustrated right now because I'm not sure what I'm doing wrong. :(
I have a Canon HV20.
I have it connected to my PC (Running Windows XP) via Firewire.
PE4 DOES recognize my camera because when I hit "Get video" on the capture panel. my camera does start playing the video and I see the timer on the capture panel.
However, if I get "Stop Capture", I get the error mentioned above:
"Recording Error: Recorder Captured No Frames."
The capture panel is also BLACK when it's supposedly capturing the movie.
Is there a setting on my camera or PE4 that I don't have correctly set?
I'm really not sure what I'm doing wrong...
I could use any help you're willing to offer.
Thanks very much!
Ted

When you start a new project, click on the Settings button and choose the presets that fit the workflow for your project. If you're just working with standard definition DV, select that.
If you are working with standard DV, you'll get the best results if you downsample the video to standard DV as you capture it, as described in our FAQs.
http://www.adobeforums.com/webx/.3bc434fa
You'll also find lots of great tutorials and lots of my helpful "Steve's Tips" articles at our "sister" site http://www.muvipix.com.
Muvipix is a site set up by several of this forum's regular, with some help from Adobe, to support amateur and semi-professional videomakers. Registration is free, and that gets you access to the forum and lots of ad-free display space. On the products page, you'll find dozens of free tips, tutorials, motion backgrounds, DVD templates, sound effects, royalty-free music and stock video clips. Hundreds more are available for individual purchase or, for a small annual subscription fee that we use to keep the site running, you can have unlimited downloads from the ever-growing library of support materials and media.

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Read this
http://support.apple.com/kb/ts1583

LR 5.5 - Cannot export/publish to HDD or Flickr from video frame capture - "An internal error has occurred: assertion failed"

Basically as the title states, I cannot publish a set of photos that originated as video frame captures, whether to my hard drive or using a service plugin for Flickr. I have tried multiple publish service plugins for Flickr and everything fails precisely the same way. This only happens when I add photos to the collection that are JPG's derived from video, and it only started doing this recently. I have other frame captures that I uploaded just fine, but it appears that nothing from the set I worked on the other day wants to upload. Other NEF-derived photos from the same set work just fine.
All I get is a Warning dialog stating that an error has occurred while the main dialog stops on "Preparing to export...", then it kicks me back with no action taken when I click OK. The status in the upper left says "Updating Published Collections". If I remove the new frame capture photo, it works fine, but as soon as I add one to the collection, it fails to publish.
I updated from 5.4 to 5.5, tried new publish plugins, completely removed and recreated my local profile, reimported my catalog, all to no avail. Everything worked fine two days ago, then when I went to upload my latest edits yesterday, I started receiving the error and have had no luck fixing it.
I used debugView to capture a log as the error occurred, so I can provide that for a developer or support contact if required.
EDIT: I just tried choosing some different photos in the set, and most appear to work, so it is just some particular images that it does not like. I will try to narrow it down.
Message was edited by: Andrew Morton

I narrowed it down to one photo in particular that it does not like. It's not a deal-breaker, but I am still curious what is going on that is causing that one photo being in a set to break the publish process

When capturing in premier pro CC. get message that says unknown record error.

When I try to capture in premier pro. I get message that says unknown record error. It happens 30 second to 2 minutes when capturing. what can I do to fix?

Is the media on an external drive?

Unknown recorder error CS6 premiere pro

I know work with CS6 for over 7 months. Always smoothly till this week. I wanted to capture a film via tape (sony HVR-V1E), my system diretly gave the following message: unknown recorder error. I klicked "okay" and gladly, I thought, it started to capture the whole tape. It looked great on my canvas.
I have edit the film but when I look at the final film on HD TV screen, I see a lot of noise, the footages are in bad shape. Cant sent that to my customer.
Also Premiere Pro crashed a couple of times while editting. It never did that before/
Some extra information. Maybe it has nothing to do with the above mentioned problem but still I want to write it down, one never knows. This is the only thing that is changed on my system:
Working on an iMac (with SSD), Quicktime needed an extra mpeg2 component for footages from a camcorder. Have replace the quicktime with a backup. Does that cost the problem?
I am on Lion Mountain. Have an SSD. The Suite is on the SSD, the footages on another internal drive.
What I have done already to solve this:
- checked google and checked this forum and checked, read and searched for hrs.
- checked if there were faillures on my SSD or the other HD drive (HD2, where I keep my footages)
- Updated my suite
- project sequence is HD 1440x1080
- Checked the footages if they were HD, and they were. (I am in Europe, so in PAL, 25 frames_
File Path: /Volumes/Macintosh HD 2/Video/project/xxxx.mpeg
Type: MPEG Movie
File Size: 67,3 MB
Image Size: 1440 x 1080
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:20:16
Pixel Aspect Ratio: 1,3333
- firewire is 800 (from camera connected to imac with an adapter from FW400 to FW 800, was never a problem).
- Have checked the above mentioned values with earlier projects and they are the same values. Earlier projects are very clear and really HD, nice to watch.
- loaded the files into iMovie and also into FCP 7. output was the same problem
- exported the final film to H.264
- Exported the final film via Media Encoder
- HD (both) have >125 gig space not used.
- Put the footages on the SSD, thats where PPR is installed
- cleaned the media caches
- checked it on our HD smart TV and the output of the tape is fine, sharp.
What can I try more. Please your help, the deadline is friday.. so I have one day to solve this problem/
Thanks in advance.

INEF1- Have you got an answer to this-Premiere pro cs 6 have started with me:
It comes up with Blackmagic design intensity shuttle usb 3.0 and with the direct firewire into the pc.
I have:
-Installed latest updates
- change the firewire
-Taking out the firewire card and re inserted it
-reset bios
-Tried capturing through the live editing desk DATAVIDEO SE-500-that captured for about 39minutes but then same problem.
2nd-It gives a low level error occurred capture device..I've look through the forums but don't find any related to this capture device error
thanks

PPro CS4 "unknown recorder error"

Premiere Pro CS4 and Premiere Elements 7.0 are both having the same problem on this machine. During the digitizing process (F5 - Capture window) it will randomly stop digitizing and a window titled Recorder Error pops up with the unhelpful message "Unknown recorder error." and only an "OK" button.
Here's the machine details:
XP
Professional
Version 2002
SP3
HP Compaq dc7600 Convertible Intel(R)
Pentium(R) D CPU 3.40GHz
3.39 Ghz, 3.00 GB of RAM
NVIDIA GeForce 7300 LE Graphics card
We're digitizing video from a Canon GL2 via Firewire:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller
What other info would a trouble-shooter want to know?
This issue is consistent for mulitple users (this machine has multiple users with unique log-ins and user profiles in Windows).
It's worked fine until a couple of months ago. An identical machine is runing Production Suite CS4 just fine. That machine has only one primary user (me). The other gets used by a half a dozen people, but the admin. functions are all locked by our IT department. Can anyone provide links to trusted trouble-shooting instructions or give me some idea of what the problem might be?
Any assistance or insight would be greatly appreciated.
Anthony Roberts
JournalStar.com

We hauled three of our systems to the Mirage in Las Vegas last week where we had to do a live show record to disk and create a bunch of DVD's for
the event attendees. We ran component from the staging company's equipment into the back of two DV Cam decks and from there we ran firewire cables into our 2 computers. We were getting the dreaded "unknown record error" on both systems at first. On both systems, I "Ran" msconfig and disabled all unnecessary startup items. One of the systems never had an "unknown record error" after that. The other system continued to have the error approx 3-5 times during a 3 hour capture. OnLocation crashed when we hit the record button so we captured everything through Premiere CS4. I think the problem may have been the drive we were capturing to. We were bad. Harm can probably guess what we did.
BTW, on the last day before my flight home, I netted a whopping $6 at a craps table. One of the young ladies I work with won $1100 placing daring but foolish bets. I watched a guy, not with our party lose over $6000 in a matter of minutes. I asked one of the guys working at the table what was the most he ever saw someone win at the craps table. he said 1.4 million.

Automatic recording errors

When recording (for example sending an email) captivate also
captures automaticaly screens in the building stage wich are not
not the final screens. So for example when clicking on sending a
new email captivate also captures a screen with a searching button,
just because it has been built in in outlook that first this screen
appears just before you get the screen you asked for.
because of this error you have to delete screens in the
recording.
please advise me on how to resolve this issue

Automatic recording is going to capture those because the
screen is changing, it is what it is designed to do. The only way
around it is to turn off Automatic Recording under Recording
Options and manually capture each screen.
I find it is more efficient to get a few incorrect slides and
just quickly scroll through in Edit mode and delete them before I
begin editing.
Jen

DVD frame capture?

I'm looking for DVD player software that has a "frame capture" feature that will run either on Leopard or on my "virtual machine" running Windows XP. On my old PC I ran WinDVD which had a neat "frame capture" feature to save images (necessary for my work). When I attempted to install my old copy of WinDVD 6 I got an error message that said it won't run on a virtual machine. Any suggestions? HELP!

Unless they've changed things, I believe that VLC (http://www.videolan.org/) will do frame captures.

Error- "Unable to capture video..."

What is the solution to allow video capture in the preferred WMV mode. I know AVI mode works but compression sucks. Plus, my laptop was always able to capture vid in WMV until recently.
Now i get this error!!!!!!!!!!! Pls advice on this error:
"Unable to capture video. Pls check hard disk space and the following are set correctly: video/ audio compressor"
I know I am not the only one with this issue. yes, already tried uninstalling/reinstalling drivers and software fron the Creative website.
THanks a lot for solutions!

Addl info
1) When using Skype, Camera and Mic work fine.
2) When I get error - the camera view on my screen balcks out

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Recorder Error - no frames captured

Similar Messages

Maybe you are looking for