Recorder not recognized

Hi, i am using Encore Cs4 and very recently everytime i am about to burn my dvd it says a recorder is not found. I burned a dvd very recently and the recorder was found. Everytime i put my dvd disc in it is recognized, but in Adobe Encore Cs4 it is not. Please help quickly because i have to do a slideshow for my school, and i need to burn the dvd. Thank you very much, I have a Sony VGC-RB34G.

If something works one time, but another, then something has likely changed. It could be an OS update, a new piece of software, or maybe a new piece of hardware. Take a look at this FAQ ARTICLE, and see if anything applies, especially the software comments.
Good luck,
Hunt

Similar Messages

  • Recording not recognizing and snapping to window.

    I was using the recorder to develop software training, it stopped recognizing, and snapping to the window, I was recording? Reviewed all setting's even uninstalled and reinstalled and the recorder still is not recognizing and snapping to other windows? Any suggestion?  Thanks, Joe

    Hi there
    There are several options for configuring how Captivate records. It might be helpful for us to assist in troubleshooting if you were to record the process of what you to before recording. You could use Jing for that.
    Click here to visit the Jing site
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • I have iMovie 09 and have successfully used an older Sony Handycam to directly capture and record. Now I have a Sony HDR-PJ230 and it is not recognized. Do I need to upgrade to iMovie 11 or ???

    Now I have a Sony HDR-PJ230 and it is not recognized in iMovie09. Do I need to upgrade to iMovie 11 or ???

    Hi jcm2656,
    iMovie ’09 does not support the Sony HDr-PJ230 camcorder. See this article for a list of cameras supported for that version of iMovie -
    iMovie '09: Camcorder Support
    http://support.apple.com/kb/HT3290#1
    iMovie ’11 however, does support it. See this article -
    Apple - iLife '11 Help - iMovie ’11 Supported Cameras
    http://help.apple.com/imovie/cameras/en/index.html
    Note that iMovie does not support footage recorded in 1080-60p from this Camcorder.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Open Script Record Error - Browser is not recognized or recorded by tool

    Hi,
    I have installed the trial version of OpenScript 9.0 for performing R & D Activities in various features of it.
    The installation was completed successful. But when I click “Record” button the browser gets launched. But when I type the URL and navigate on the browser it is not recognized or recorded by the tool. Please help me on this.
    Regards
    Shan

    Hi,
    - maybe try to reinstal openscript ?
    - you have any messages in Console that could help ?
    - nothing recorded at all in Run ?
    because for me it worked nice on first shot with IE on :
    - xp sp3
    - xp sp3 VM remote
    - vista
    i did not try FF.
    Michael.

  • T500 - DVD Multi Recorder CD-RW Not Recognized

    Hi all,
    I just bought a new ThinkPad T500 few days ago.
    Unfortunately, I have a problem with the DVD unit,
    since it is not recognized by any operative system
    (I tried both Windows and Linux).
    When the pc starts, the light on the DVD unit are on,
    but just few seconds after they becomes off and the
    unit is unusable.
    Also the BIOS does not see the unit in the start driver
    list.
    Please, it there someone that can help me
    Thank you in advance for your help.
    Fabio

    Hello Fabio,
    the fact, that the drive doesn´t function in any os, regards to a hardware problem.
    You can try PCDoctor or it´s aquivalent, Lenovo Tool Box, to check the healthy of your drive,
    but the fact, that even the bios is not recognising it, isn´t a good sign.
    I would suggest to call Lenovo support line.
    Message Edited by Agotthelf on 10-18-2008 07:56 AM
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Blank recordable CD not recognized by Audition

    I have a project that I'm trying to burn onto a CD, but whenever I insert a CD and try and burn it, I get a notice saying that "no media was found in the device."
    I've tried using about 3 different CDs, and my computer is capable of both reading and burning CDs using other programs, so I know that the computer is capable of burning CDs.
    Any help would be much appreciated.

    I found some information about people experiencing similar issues with the HL-DL-ST drive at http://forums.support.roxio.com/topic/91135-nxt-pro-2-not-recognizing-disc-in-drive/  and similar reports in general with the Dell XPS 8700.  I'm still researching what might be happening, or if these drives may be using a new driver model that may not be supported by the CD Burning engine licensed in Audition.  As soon as I have more information, I'll follow-up.

  • I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

    A new problem with CS5 forced me to download PScc but the problem is still there.  I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

    if i run this particular code
    ( SELECT
    AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
    AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
    AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
    FROM AccountDetails
    JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
    WHERE EXISTS
    ( SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    AND DebtEpisodes.DCASentDate IS NULL
    AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
    AND DebtEpisodes.DCAORLAWYER = 'DCA'
    This returns 1 row of data
    However if i run a small part of the above code...
    SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    It returns a lot of rows with a status of 2
    Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
    :(

  • Intermittent : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.

    I have developed a batch harness whereby all scheduled tasks (W2012) invoke a common powershell script that acts as a wrapper to all our housekeeping jobs.
    The first step in the wrapper is to create a Transcript file using following code
    if ($Host.name -ne "Windows PowerShell ISE Host") # Transcript does not work within ISE
    $timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
    $path = "c:\corp\$timestamp" + "_$pid.txt"
    Start-Transcript -path $path -append
    As expected the folder contains files with timestamp & pid in name
    08/08/2013  11:00 AM            14,388 2013-08-08-11-00-01.158_1620.txt
    08/08/2013  11:00 AM            12,506 2013-08-08-11-00-01.485_936.txt
    08/08/2013  11:00 AM            12,994 2013-08-08-11-00-01.735_9328.txt
    08/08/2013  11:00 AM            12,024 2013-08-08-11-00-01.766_8624.txt
    08/08/2013  11:00 AM            13,902 2013-08-08-11-00-01.860_1756.txt
    08/08/2013  11:01 AM            15,142 2013-08-08-11-01-31.392_10120.txt
    08/08/2013  05:00 AM            14,982 _1692.txt
    However note the last file, it has a zero length date time value in the name
    The error recorded by PowerShell is
    get-date : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At C:\Corp\Powershell\DMPRun-ScheduledTask.ps1:171 char:18
    +    $timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
    +                  ~~~~~~~~
        + CategoryInfo          : ObjectNotFound: (get-date:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    IE get-date has failed and returned a zero length field as the timestamp
    Can anyone think of a good reason why get-date would fail intermittently?
    Do I have to code defensively for base Powershell functions?

    I implemented David's suggestion and now I intermittently get
    import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
    At D:\temp\loop_jc2_2013_11_25_08_55_02.ps1:15 char:1
    + import-module Microsoft.Powershell.Utility
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Import-Module], UnauthorizedA
       ccessException
        + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
       erShell.Commands.ImportModuleCommand
    I added a trap chain (My Powershell skills do not yet include recursive trap coding, any suggestions welcome)
    trap {
        trap {
            "Trap1"
            "Exception: " + $_
            "Error: " + $Error[0]
            "Message: " + $_.Exception.Message
            "InnerException: " + $_.Exception.InnerException
            "StackTrace: " + $_.Exception.StackTrace
            "FailedItem: " + $_.Exception.ItemName
            import-module Microsoft.Powershell.Management
            import-module Microsoft.Powershell.Security
            import-module Microsoft.Powershell.Utility
        "Trap2"
        "Exception: " + $_
        "Error: " + $Error[0]
        "Message: " + $_.Exception.Message
        "InnerException: " + $_.Exception.InnerException
        "StackTrace: " + $_.Exception.StackTrace
        "FailedItem: " + $_.Exception.ItemName
        import-module Microsoft.Powershell.Management
        import-module Microsoft.Powershell.Security
        import-module Microsoft.Powershell.Utility
    import-module Microsoft.Powershell.Management
    import-module Microsoft.Powershell.Security
    import-module Microsoft.Powershell.Utility
    trap {
        "Trap3"
        "Exception: " + $_
        "Error: " + $Error[0]
        "Message: " + $_.Exception.Message
        "InnerException: " + $_.Exception.InnerException
        "StackTrace: " + $_.Exception.StackTrace
        "FailedItem: " + $_.Exception.ItemName
        exit 1
    get-date
    Now I intermittently get ..
    Trap2
    Exception: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
    Error: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
    Message: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
    InnerException:
    StackTrace:    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.Threading.Mutex.MutexTryCodeHelper.MutexTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.Mutex.CreateMutexWithGuaranteedCleanup(Boolean initiallyOwned, String name, Boolean& createdNew, SECURITY_ATTRIBUTES secAttrs)
       at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew, MutexSecurity mutexSecurity)
       at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew)
       at System.Management.Automation.AnalysisCache.CacheExportedCommands(PSModuleInfo module, Boolean force, ExecutionContext context)
       at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadUsingModulePath(PSModuleInfo parentModule, Boolean found, IEnumerable`1 modulePath, String name, SessionState ss, ImportModuleOptions options, ManifestProcessingFlags manifestProcessingFlags,
    PSModuleInfo& module)
       at Microsoft.PowerShell.Commands.ImportModuleCommand.ImportModule_LocallyViaName(ImportModuleOptions importModuleOptions, String name)
       at Microsoft.PowerShell.Commands.ImportModuleCommand.ProcessRecord()
       at System.Management.Automation.CommandProcessor.ProcessRecord()
    FailedItem:
    import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
    At D:\temp\loop_jc2_2013_11_25_09_19_52.ps1:26 char:1
    + import-module Microsoft.Powershell.Security
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Import-Module], UnauthorizedA
       ccessException
        + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
       erShell.Commands.ImportModuleCommand

  • My iPhone 6 is not recognized by Verizon?

    Can anyone tell me why my iPhone 6 would show up as Non-VZW Device in the Verizon iPhone App?
    My wife's iPhone 6 and mine were both purchased through Verizon as part of the same order. Her's shows up as an iphone 6, mine doesn't. Other than that, the phone works fine. Mine is also not recognized on Verizon's website.
    Any helpful suggestions/assistance would be appreciated.

    The device was activated Oct 9th. It's been three weeks now.
    How long might it take? Is there anything that you or I can do to speed up the process?
    Since my wife's phone, activated at the same time, is recognized properly, I'm wondering if something needs to be done rather than just wait. Is there anything that can be done to verify that the phone's numbers(model #, Sim card, IMEI, etc) are correct in Verizon's records?
    Thanks!

  • SONY HDR XR150 - Camcorder is not recognized by iMOVIE

    Dear all:
    _I own the Sony HDR XR150 camcorder and cannot get my MAC to recognize that my camcorder is connected._
    I have a Mac laptop Powerbook G4 and am running OS X version 10.4.11. I have iMOVIE 6.03 (267.2).
    When I am in iMOVIE the camcorder is not recognized. :[
    It states "No camcorder attached" even when I have small Firewire cable running from camcorder to larger firewire cable plugged into MAC. My footage on camcorder is on hard drive. I have no idea if the footage was taped in a certain format and I mention this because there are lots of formats written about in this forum - I just assumed everything was recorderd in HD. I simply hit record on camcorder to tape footage. When connected, I click on a button on camcorder for USB connect that uses the Internal Hard Drive (where my footage is). However, my camcorder is not recognized on iMOVIE.
    I am worried that the problem is I do not have an Intel based Mac. The software that came with Sony camcorder called PMB (Picture Motion Browser - only works with Windows.)
    This is what I dug up online.
    Tapeless Camcorder Support
    iMovie '09 works with many tapeless camcorders that record to flash memory, a hard disk drive (HDD), or DVD media. These devices use a USB 2.0 cable and include camcorders using MPEG-2 (standard definition), MPEG-4, AVCHD, and H.264 formats. If you use the AVCHD format you will need a Mac with an Intel-based Core Duo processor or better.
    Due to the wide range of media types, and the different ways manufacturers store video on these media types, not all tapeless camcorders are compatible with iMovie '09.
    NTSC Camcorders
    PAL Camcorders
    http://support.apple.com/kb/ht3290
    *CAN ANYONE CLUE ME IN AS TO HOW TO GET MY SONY CAMCORDER TO BE RECOGNIZED IN IMOVIE?*

    My friend just wrote this to me as a possible solution...
    It doesn't surprise me that AVCHD is only supported on Intel machines. Apple tends to stop updating older products/software in favor of their newer lines. To their credit, high compression HD codecs are processor intensive, and older hardware would have a hard time with it.
    The camera may have some alternate options for video file type... Check the manual or help docs. Unfortunately, that could mean SD recording rather than HD.
    I DON'T KNOW IF MY FRIEND'S INFORMATION MIGHT HELP SOMEONE GIVE ME SOME EVEN BETTER IDEAS AS A SUGGESTION. AVCHD is a high-def video format that allows HD camcorders and some digital cameras to record video at resolutions up to 1920 x 1080. SOUNDS LIKE MY FRIEND IS SAYING IF I DON'T RECORD IN HD ON MY SONY CAMCORDER MAYBE MY IMOVIE WILL BE COMPATIBLE WITH IT. BUT MY IMOVIE DOES NOT EVEN RECOGNIZE MY CAMCORDER... SO I DON;T THINK HIS SUGGESTION WILL WORK...
    SUGGESTIONS?

  • My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
    For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
    What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
    Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

  • External hard drive clicking and not recognized by mac will DiskWarrior work?

    First of all apologizes if I've posted in the wrong community I couldn't find one that really fit my particular query.
    I'll give a quick rundown of what happened and see if anyone can help or suggest a course of action. My Seagate External HDD model SRD0SP0 was mounted to my 2013 MacBook Air when it started to make a loud noise freezing the computer and requiring me to force shutdown the entire system. I immediately rebooted the computer and it started up again fine but when I tried plugging in the drive to the USB it would only spin and beep at regular intervals and then go quite. The drive did not mount to the desktop but I could see it in DiskUtility although the 'verify' and 'repair' options were greyed out. I tried to connect to a PC but it would not recognize the drive either. I left the drive alone for a few months and now when I plug it in it starts to fire up with the whirl sound but that is quickly followed by 5 faint ticks followed by a louder click. It almost sounds like something is dragging and the click is it coming to an end before starting up again. (I have a .m4a recording of the this but I don't see an option to upload) This goes on for about 20 seconds and then a window pops up saying something along the lines of 'this disk is not recognized by this computer' and the options to 'initialize' 'ignore' or 'eject'. I have only ever clicked eject. As before the drive is visible in DiskUtility but the options are greyed out.
    I contacted a data recovery agency and their response was:
    I would recommend to remove bare drive from the External casing and connect it to a computer directly or via another USB enclosure. If the drive is internally fine you should be able to see and copy the files. If you still get the same symptoms then your clicking hard drive most likely has internal problem with read/write heads and needs head assembly swapped from a donor. It's a very serious problem and recovery procedure in this case requires a lot of experience, use of class 100 clean room and specialized equipment.
    If stored files are not particularly important you should replace the hard drive. If you need data from the drive we could recover it for $950 USD.
    At this time I am not comfortable taking my drive apart and I can not afford close to 1k in repair costs. From my research on this forum I have seem multiple suggestions to try DiskWarrior but I am not sure that it will work with the problems that I am describing. Before I spend the money has anyone had a similar problem and had success recovering their data via DiskWarrior? Or do I have to resort to the data recovery agency or the freezer technique?

    If the drive is making clicking sounds then it will probably fail. That's evidence of a mechanical issue. DW isn''t going to fix that nor will Disk Utility. Only replacing it with a new drive will fix it. While you can you should make a backup.

  • No luck importing from SonyHandycam DCR-DVD650?  I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera.  Any ideas what the issue could be?

    I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book.  I am using the USB connection.  The macbook is not recognizing the camera.  The macbook is running OSX 10.6.8.  Any ideas on what the problem could be?

    http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
    According to this website the camera should be compatible with iMovie '11
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    So here's some steps to take to get the Mac to recognize your camera.
    1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
    2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
    3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
    4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
    No guarantees, but some things to try

  • Not recognizing # while reading the file from application server

    Hi
    I am reading a file from application server. While reading into internal table with read statement the last field in each record is filling with hash symbol in the last digit. If I write any if condition with HASH symbol its not going inside the if condition, means its not recognizing as hash may be its internally treating as some other. I need to remove the hash from that field. How I can do that.
    Thanks,
    kishore

    I faced exact situation. Yes, internally its treated as some other special character. What i did was, becuase hash symbol was always coming at the end...i created a dummy field in my internal table so that it will not interfere with my actual data. When i see the data in my internal table, the hash always falls in the last field (dummy) which i will ignore. I could not get solution to remove this hash so i adopted this approach and it worked!!
    Hope it helps,
    SKJ

  • Canon Gl2 Video Camera Not Recognized with Firewire 800 Connection

    I have a late 2010 mac with 2.93 Ghz Intel Core i7 Processor with 12GB DDR3 running 10.8.2 OSX.  I have a Canon GL2 video camcorder with a MiniDV tape I am trying to download to my computer.  I am using a new 4pin to 9pin Rocketfish Firewire 800 cable. My computer is not recognizing the firewire input from the GL2.  As suggested with other support threads, I have tried to turn the mac and computer off and on, as well as check to see if the cable is working.  I have also tried both a trial version of Final Cut, and Imovie 09 which is loaded on my Mac, neither of which will recognize the camera.  I clicked on the System Information icon and looked at the Firewire 800 status which was:
    FireWire Bus:
    Warning: Unable to list FireWire devices.
    Maximum Speed: Up to 800 Mb/sec
    At least I know it recognized something.  I have also checked to make sure the Canon is set to DV-Out on the Menu.  Since I am unable to use a USB connector with MiniDV, would there be any other way to either A) Download the video to the computer, or B) get the Mac to recognize the source plugged into the Firewire?   Any help with this would be excellent.

    I believe that in order to be recognized, you have to start the process from within iMovie of Final Cut; as for your FW port, you can try these two different troubleshooting steps (may or may not work, but won't hurt):
    Reset SMC:
    http://support.apple.com/kb/HT3964
    PRAM:
    http://support.apple.com/kb/HT1379
    It may that your FW port is defective; it that turns out to be the problem, I hope you purchased Applecare because those ports are an integral part of the logic board, so that would have to be replaced ($$$).
    Since your footage is on DV tapes, you do need the FW to transfer it or it will not work. One other (involved) way would be to transfer your footage to a DVD if you have a DVD recorder and then get it on the Mac from there.

Maybe you are looking for

  • "Save output of a query in Substitute variable"

    Hi All, I am using oracle11g r1 on windows platform. i want to know how can i save the output of a query in a substitute variable so that i can user that variable in other query .i am using this query and i want to store the output in *"&Schema*" var

  • Using a remote repository

    Hi All, We have our repository created on a centralized server and want to use the connect from the client machines. Tried searching for the ways/configurations to write the placeholder queries for a remote repository to no luck. Kindly help. Regards

  • HELP with WiFi Printing on my Mac Book 10.8.4

    My Mac Book Pro 10.8.4 will not print through WiFi but when I hit test it will print but will not print a document or anything else.  I have a new Brother MFC-J435W and have spent over 8 hours trying to get this hooked up and running.  I tried it on

  • I want to change the SSID of my printer

    HP Officejet 6600 Win XP I have been using this printer wirelessly for some time with no issue. I have recently expanded the wireless printing capabilities so we can print from our iPads and iPhones. We have two wifi spots; one for the printer called

  • My Photo Stream keeps turning off in my iCloud Control Panel on my Windows 7 PC.

    I have an HP Pavilion g6 and it runs on Windows 7. iCloud is already set up on it, as well as on my iPhone, but when I go to use the computer, I find the Photo Stream turned off (I am still logged into iCloud Control Panel.)