Recording a DJ mix on Garageband...only able to record an hour?
Hi, I'm trying to record my latest mix but the track stops recording after just over one hour, Is there a way to extend record time, i'm making sure I have plenty of disk space, have 6gig spare and the current mixes of just over the hour are only 800Mb so far so this doesn't seem to be the problem, and I make sure all other programs are closed. I haven't found any other options so far, can anyone offer any advice? Thanks.
Also, I'm recording directly from my mixer, I take it I need to record the track as a 'real instrument' as opposed to the 'record as software instrument' option.
Is there a way to extend record time
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlength
I take it I need to record the track as a 'real instrument'
yes
as opposed to the 'record as software instrument' option.
that would be physically impossible.
Similar Messages
-
Trying to record a DJ mix with GarageBand?
Hello and Happy new year !
I am a mac beginner, I am also DJ and I would like to record my dj Mix
I have plugged the special cable from my pionner mixer to my Line In on Mac
then which programs shoud i use on garageband Loops or guitar ..Do I need to change something on the preference?
ninaninajolly wrote:
which programs shoud i use on garageband Loops or guitar
Acoustic Instrument
..Do I need to change something on the preference?
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen) -
I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.
Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing. -
I would like to know If I will be able to record(using quick time player) both audio and video on my mac with head phones connected
My Mac - OSX Version 10.9.3 , Processor 1.8GHz Intel core i5, Memory 4GB 1600 Mhz DDR3Hi Sansony,
Welcome to the Apple Support Communities!
I understand you would like to record audio from the headphones you connected to your computer. When recording audio with QuickTime Player, you can choose to use the built-in microphone, an external microphone you’ve connected, or a microphone from a connected Apple display. Please use the following article as a reference.
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
Clicking the triangle icon gives you additional options, such as letting you choose whether to use the built-in microphone on your Mac, an external microphone you've connected to your Mac, a microphone from a connected Apple display, or the option to simply use no microphone at all. The triangle also allows you to adjust the finished quality of your screen recording, select whether or not your mouse clicks are shown during the recording (the pointer is highlighted when you click), and to select what location (on your Mac) to save your screen recording when finished.
Have a great day,
Joe -
Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play. Ive worked so hard on this and I don't know how to fix it. I am not very skilled or knowledgable in computers and barely know how to operate Garageband as it is. I have many different tracks in this song for different drums and beats. Please someone tell me how to fix this, I'm not even finished it! And again I am not very informed on how to work computers as well as most of you are, just saying. thanks!!!
P.S.: In my about this mac thing, it says i have version 10.9.1, 2.26 GHz Intel Core 2 Duo, and Memory is 2 GB 1067 MHz DDR3Could you do this?
Go to Finder
Go to Applications
Go to Utilities folder
Launch Activity Monitor app
go to its Memory tab on top
tell us what you see at the very bottom?
Here is a sample of mine.
I bet your page/swap amount will be huge.
If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time. -
o.k., here i am, trying to record a dj mix. Normaly i would use my minidisc recorder and audio cd recorder to do so. Now i want to use my mac for it.
But how do you do it? I've read all the other topics about recording a dj mix but i must say, it doesn't work for me. I've read that for this purpose you have to use garageband. IN either Garageband or Logic there is no incomming signal. I've hooked 2 jacks from the master output from my mixer to my soundcard(Firewire solo)to the unbalanced inputs.
Let me tell you the gear i use: 2 Pioneer CDJ800, 1 Pioneer DJM500, Macbookpro (read below) M-Audio Firewire solo, Logic Pro 7.2.3
I've tried to searc for any incomming signal in my logic trackmixer, but can't find it. Which region do i use for this?
Help!
Lewis
Macbook Pro 2,16 Ghz intel Core 2 Duo Mac OS X (10.4.8) Logic express 7.2.3
Macbook Pro 2,16 Ghz intel Core 2 Duo Mac OS X (10.4.9) Logic Pro 7.2.3you don't use a region. use an audio track. click on the R button on say audio track 1. check to make sure the inputs 1-2 correspond to your soundcard inputs and you should be able to hear the incoming signal/mix.
another point: have you selected the correct audio interface in Logic?
goto to the main audio menu>audio hardware and .......... (think that's the name) then make sure your m-audio solo is selected as the interface in the relevant dropdown menu.
hope that helps
rounik -
I purchased an Inport recording device to be able to record music from devices such as a Cassette player. There were no problems in recording from external devices.
I used ICHAT for the first time. Since using ICHAT for the first time, I am not able to record into Garage Band. I also have a MACBook. The MACBook has not used ICHAT and will record from the cassette player.
Garageband shows using the Inport device but neither the mixer or sound show any activity.
Thank you.That topic that was linked to contains the "first thing to try" but you don't mention whether you tried it or not.
Right click on the the little loudspeaker icon in the bottom right hand side of your screen. Select "Recording Devices". In the Recording Devices screen, put your cursor any place on the background, i.e. no device highlighted, then right click again. You should get a menu with tick boxes offering "Show disabled devices" and "Show disconnected devices". Put a tick in both boxes.
If your computer manufacturer took the easy way out and just disabled the facility, this should give you a source called "Stereo Mix" which will give you what you want.
If you don't get that, blame the manufacturer.
Like Ryclark, I don't know of any free way around this, but another direction to try is some software called Virtual Audio Cable available from http://download.cnet.com/Virtual-Audio-Cable/3000-2168_4-10067766.html . Again, not free but you can do a trial before paying to make sure it works.
Bob -
Using Line 2/3 on Xenyx 502 Mixer with Garageband
I would like to be able to use the Line 2/3 on my Xenyx502 Mixer as backup means to using Skype for guests to call in on a low budget podcast show. I have a 1/4" Y adapter cable that will hook up to my iphone, the problem is whenever it is plugged in, Garagbend is recording through the iPhone mic instead of the mic that is plugged into the mixer. As soon as I disconnect the cable or phone Garageband goes back to recording through the mic. I am new to this and would appreciate any help.
Using a MacBook Air with Yosemite, Garageband 10.0.3
Xenyx 502 Mixer, UCA200 U-Control, Line In App/Software and SoundflowerTry to reset the network parameters.
Ryan Shi
National Instruments
Attachments:
SetNetworkParameters.JPG 1 KB -
Getting only a few records at a time.
Using a Select * from. Is there an option where I get only so many records. This is for a console application. I wanted some thing where it will display only 3 records at a time. And then I have the option of viewing the next 3 and then the next 3 records
and so on.
Any one have any ideas.
Merry Christmas EVERY ONE and thanks to all the members on msdn forums for helping me with my code.
Joe Moody
http://www.starfiresoft.com
Pro-Forums
Delta Force Barracks
On the FrontlinesThanks. It doesn't matter as long as I can get it to work. The idea is to display 3 records at a time. Then the user should be able to go backward or forward in the list. Let me show you what I have. This will give you some idea on how I have it displaying
the info.
SqlCeCommand cm = new SqlCeCommand("SELECT * FROM users", cn);
//cm.Parameters.AddWithValue("@tooid", num);
//cm.Parameters.AddWithValue("@fromid", Id);
SqlCeDataReader rd = cm.ExecuteReader();
try
while (rd.Read())
Door.CursorRight(10);
Door.WriteLn("|0C___________________________________________________");
Door.CursorRight(10);
Door.WriteLn("|0FId |04: |03" + rd["Id"].ToString() + " |0FName |04: |03" + rd["username"].ToString());
Door.CursorRight(10);
Door.WriteLn("|0FStatus |04: |03" + rd["status"] + " |0FDate Jointed |04: |03" + rd["joindate"]);
Door.CursorRight(10);
Door.WriteLn("|0C___________________________________________________");
catch (Exception e)
throw new Exception(e.Message);
cn.Close();
This is inside of a do loop. and at the bottom I have it waiting for user input. or the user can quit and return to the main menu.
Door.WriteLn();
Door.Write("|07Page |0F<|04||0F> |0FQ|09)|0BQuit |07Choice |04: |0C");
cc = Char.ToUpper(Door.ReadKey());
Above is my prompt. This waits for user input. and I use a switch to tell the software what to do. Any way if you want to know what Door.writeLn() is, Think of it like this "Console.Writeline()". This is just a library I use for the kind of programming I
do.Any help would be great. Thanks and have a safe Xmas.
Joe.
http://www.df-barracks.com Delta Force Barracks
http://www.starfiresoft.com Starfire Software -
Suggestion when only able to connect to some services when using Kerberos.
I had been having problems using Kerberos for authentication for some services. It worked fine when on a LAN and worked when I had a VPN (MS-CHAP). But when trying to connect normally, I was able to get a TGT, but often ran into issues when trying to connect to other services (e.g. IMAP / VPN). What's more, sometimes everything did work, but stopped again soon after.
My setup has one server providing all the services in question. There were several CNAMES linking the different services (e.g. ichat.mydomain, mail.mydomain etc).
I found a number of people who seemed to have similar issues, but the threads were archived so I couldn't post a reply. So I'm hoping they come across this message and it helps them.
Because of an unrelated problem, it was brought to my attention that there were some problems with the DNS records relating to my domain – not on my server, but on the net.
After some experimenting, I discovered that if I set the DNS (in System Preferences) on my client Mac to the server I was contacting most things worked.
It seems that the Kerberos system may do a reverse lookup at some point, or something similar.
When I do a "dig -x <my ip address>" I get different responses over time, and from different DNS servers. When I did "dig @<my own dns> -x <my ip address>" it always came back with the correct server name.
So perhaps the issue lies with the DNS that your machine is looking up? This would explain why it works on the lan (the DNS is probably your server) and over VPN (again your server is the DNS).
This may not be the answer to these people's problems, but if you were getting messages such as "Server not found in Kerberos database" in your logs, it may pay to check what is getting return by DNS servers outside your organisation.
HTH.
iMac G3 Mac OS X (10.4.8)CharlieJ wrote:
The problem is this: When any one of the computers is connected to the internet through the DSL none of the others computers is able to connect – I see the message “Connecting through WAN miniport (PPOE)…”, i.e. I am only able to connect to the internet 1 computer at a time.
As soon as I disconnect from the ‘connected’ computer (desktop or laptop) I am immediately able to successfully connect to the internet on either of the other 2 computers.
I’ve tried resetting everything – no luck.
I don’t recall having changed any of the settings and am baffled.
Any thoughts as to the problem?
Thanks in advance for any help.
Charlie
PS. I haven't called the Verizon DSL Tech Support team yet...but I will soon. I figured on asking here first.
Ok.
#1 You must get to the network control panel on your computer.
One of the ways, for Windows XP is:
a) Go to Start -> Control Panel -> Network Connections
b) The screen will look like steps 5 and 6, on http://portforward.com/networking/static-xp.htm
For Windows Vista:
a) Go to the globe icon (start button) -> Control Panel -> Network and Sharing Center -> Manage Network Connections.
b) The screen will look like steps 5, 6, and 7, on
http://portforward.com/networking/static-vista.htm
#2 Right click on the WAN miniport (PPPOE), and remove the check mark that says Set as Default Connection.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
I thought the NEW DVR's were supposed to be able to record more than 2 shows at 1 time
I was told that the New DVR which is what i have, i guess its called a media center or something like that was supposed to record more than 2 shows simultaneously but found out last night that not to be true. I had 3 scheduled and 1 of them did not record.
its next to impossible to make 1 show record at a later time, in the instance of a series because you would have to allow it to record 1st run and repeats. I don't want it to record older previous episodes. If I set it at only 1st run it would skip the later time becaue it is no longer 1st run it is now a repeat.
there needs to be a better option available for series or truly allow to record more than 2 shows at a time.no-more-holds wrote:
I was told that the New DVR which is what i have, i guess its called a media center or something like that was supposed to record more than 2 shows simultaneously but found out last night that not to be true. I had 3 scheduled and 1 of them did not record.
its next to impossible to make 1 show record at a later time, in the instance of a series because you would have to allow it to record 1st run and repeats. I don't want it to record older previous episodes. If I set it at only 1st run it would skip the later time becaue it is no longer 1st run it is now a repeat.
there needs to be a better option available for series or truly allow to record more than 2 shows at a time.
If the media server you have (Arris VMS1100) is only recording 2 shows at once then you aren't signed up for enhanced service which does cost more per month.
All new customers are getting the VMS boxes however you have to add the correct service to be able to record 6 shows at once. If you don't have enhanced then Verizon limits the box to be able to only use 2 tuners.
If you want the 6 tuner option you have to upgrade through your account online or call them for them to add the enhanced service.
I don't know if thats what you wanted and did order it and Verizon didn't configure your account correctly or not, but thats how it works.
If you want to have 6 tuners and want to add the enhanced service all you have to do is this unless you'd prefer to call.
Sign into your account online and go to add/change service. Once you are on the add/upgrade my services pages, on the left click on tv equipment & outlets. You should then see an option to add the enhanced service on it. If it is not there then you will have to call. -
Display only the last record per material in SAP query
Hi,
I have created a SAP Query using the quickviewer that is a join between 2 tables (MSEG and MKPF) that consist of material document information and date of posting.
The results are fine however I would like only the last record per material to be displayed.
Can anyone tell what do I need to add so for only the last record per material be displayed in the output.
Thanks,
MarkHi Mark,
May be if you use Control Level processing .........I think you will be able to get the result you want. Try displaying as Below,
LOOP AT XXXXX.
AT FIRST material.
ENDAT.
AT LAST material.
*...Display what ever you want here. It will display at end of every material.
ENDAT.
ENDLOOP.
Before using sort the table with key material in ascending.
Hope what I had to say is helpful to you.
Cheers,
Raga Suman. -
Synchronize only checked in records from Master to Slave
Hello All,
Would someone be able to tell me if there are any CLIX commands that allows the slave to synchronize with the master such that only checked in records are transported from master to slave.
Regards
VenkatHi ,
In free-from search you have option of "expression".
There you can put the option of "Is checkout version".
Hope this helps,
Pls let me know the result.
+ An
(you didnt closed your previous questions) -
Syndicate only certain Tuple Records
Hi Experts,
We are using MDM 7.1 SP03. Is there any way that I can syndicate only certain tuple records?
Example:
Customer Master has two Purchase Organization records inside a multi-valued Purchase Organization Tuple. One record uses Purchase Org code = 4100 and the other record uses Purchase Org = 4005. Is there any way to syndicate out only the Purchase org record with code 4100?
I have tried to use the filtering options in the syndicator: Filter Qualified Links and Filter Multi-valued Lookup fields. This does not work.
I have the search parameters set to Customer records with Purchase org = 4100, and the customer record has two tuple records (4100 and 4005) the syndicator will push out both records. I only want the 4100 record to push out. Please help!
Edited by: Matthew Winchester on Feb 3, 2011 5:01 PM-These records are not Remote System specific.-
-The search criteria using expressions do not work-
Example XML Structure:
<Account_Group>Z001</Account_Group>
<Name_1>Test, Inc</Name_1>
<Search_Term_1>HQ</Search_Term_1>
<Search_Term_2>Serach One</Search_Term_2>
<Street>Main Rd</Street>
<House_Number>300</House_Number>
<City_Postal_Code>12345</City_Postal_Code>
<City>Cumming</City>
<Country>US</Country>
<Region>GA</Region>
<Address_Time_Zone>EST</Address_Time_Zone>
<Transportation_Zone>XXX3432</Transportation_Zone>
<Language>E</Language>
<Remote_Key />
<Tax_Number_2>5464654654654</Tax_Number_2>
- <Vendor_Company_Code_Data>
<Company_Code>4005</Company_Code>
<Reconciliation_Account>4100000</Reconciliation_Account>
<Sort_Key>009</Sort_Key>
<Payment_Term>ZD22</Payment_Term>
<Double_Invoice>X</Double_Invoice>
<Payment_Term_Credit_Memos>ZD22</Payment_Term_Credit_Memos>
<Payment_Method>F</Payment_Method>
<Vendor_Withholding_Tax_Data />
</Vendor_Company_Code_Data>
- <Vendor_Company_Code_Data>
<Company_Code>1700</Company_Code>
<Reconciliation_Account>4100000</Reconciliation_Account>
<Sort_Key>009</Sort_Key>
<Payment_Term>ZD22</Payment_Term>
<Double_Invoice>X</Double_Invoice>
<Payment_Term_Credit_Memos>ZD22</Payment_Term_Credit_Memos>
<Payment_Method>F</Payment_Method>
<Vendor_Withholding_Tax_Data />
</Vendor_Company_Code_Data>
Senario: I export this entire record out using the syndicator. When importing into a different repository is there a way that i can ignore the segment with Company Code 4005, and only create the segment for company code 4100? It would be great to be able to handle this automatically....any sugestions? I need to be able to filter out certain company code records from importing, since there is no way to filter out during syndication, can this be handled using the Import Manager?
Edited by: Matthew Winchester on Feb 3, 2011 10:27 PM -
Hi,
I am trying to record script in using Functional Oracle EBS/Form in open script but only Oracle Forms actions are got captured.
I am not able to record first web navigation(URL/Certificate Error : Navigation Blocked) part, only i am getting "web.window(7, "/web:window[@index='0' or @title='about:blank']"). close()" code for navigation of URL part.
I tried with changing Capture Screen in Recorder but doesn't work.
How to resolve this.
Please help me out.
Here is some info :
OATS version : Version: 12.3.0.1 Build 376
Browser : Internet Explorer 9
Operating System : Windows 7
I am using VPN connection to open oracle application.try adding ur url in secured site list
Maybe you are looking for
-
Is there a way to vary the speed of playback for a podcast on my desktop iTunes?
I love listening to my podcasts at 2x speed on my iPhone- is there some reason iTunes won't let me do this on my desktop? Windows Media Player does it, but it screws up other things. If Itunes won't do it, is there some other software that will? It
-
I can see only one ringtone in the custom ringtone box.plz help
i can see only one ringtone in the custom ringtone box.plz help
-
ITunes corrupted, can't re-install, nor uninstall
Running Windows XP. I ran a Windows Update the other day, that was titled "Update for XP" or something vague like that. Last night I clicked on iTunes and rather than startup normally, it went into a window that said iTunes was installing....then it
-
RFC to HTTP Scenario, Dynamic URL .... Limitation with 200 Character...
Hi Experts, I am doing an RFC to HTTP Scenario. In which the Target URL is Dynamic and i am passing some values from the input payload. The Problem is the Target URL length is around "487" character and the Dynamic configuration property allow to pas
-
Problem archiving file using FTP adapter
Hi, I am polling some files from another server using FTP adapter in SOA 11g. Even though I have checked the option to archive the files, the files get archived successfully on the server where the SOA process is running, but I am unable to archive t