Recording a movie using a Sony Vaio Motion Eye?

So I have a Sony Vaio VGN-FZ38M, with an in-built motion eye camera. Whenever I try and use this in Premiere it doesn't work; the device is, apparently online. Is there a fix for this? There is another capture program that came with my laptop which I can use, but I'd rather capture it in Premiere because that's what I'm using to edit it.
I am using Premiere Elements 4 on Vista Home Premium 32-bit.
Thanks in advance :)

your camera may be being used by other Sony utility and therefore PRe wont get the handle. Ask SOny for help.

Similar Messages

Thoughts on using a Sony Vaio with CS5 for HD event video projects?

Basically I would need to use my Sony Vaio F12 laptop to edit HD wedding videos on CS5. I wanted some opinions on my equipment so i will be able to edit a long project(about an hour to 2 hours) smoothly with no dropped frames, errors, system crashes, etc. So I would basically i need a setup that can keep up.
Specs: Sony Vaio - Intel Quad Core i7 1.73 Ghz(Mobile version), 6 gig ram, 500 gb 7200 rpm HD, Nvidia GeForce GT 330M(1GB dedicated video memory)
I know I would at least have to use an external HD from the video and audio. I have a 1TB Samsung Story external USB and another 1 TB one that is eSata but am having problems with the esata port on the Sony.
Would this be adequate or would their be some obvious areas that you could see causing problems? I'm thinking the USB external might cause a bottleneck for one.

The assumption for why there is negligible performance gain is incorrect. If they changed the speed of the CPU and had an understanding how CUDA works they would probably have seen that. The GPU can only perform as well as the CPU allows it. What this means is the CPU has to process the threads before sending the appropriate data to the GPU for processing via the System ram. There are many factors that effect CUDA and especially performance with the MPE. The biggest though is the processor. If you set a GPU monitor utility, you can monitor the activity on the GPU while the CPU is at stock speed and then at overclocked. You will see a sizable difference in performance/usage on the GPU and GPU ram based on the speed of the CPU. What this tells you is that the GPU may be the best performing you can get but it will sit more than 90% idle if the CPU is taking to long to process the data it requires. CUDA sends threads to all available CUDA cores and is not limited at all like CPU threading. It literally just throws threads out there to the cores in simple terms. The assumption is incorrect in the link you reference.
Eric
ADK

What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

Firefox keeps crashing..mulitple times per day.. I am using a sony vaio 64 bit

Firefox crashes multiple times per day... I have a sony vaio 64 bit..please help

<pre><nowiki>bp-4e85dcbf-ac0f-4ef3-86e1-8634f2140415 4/15/2014 4:33 PM
bp-b5a62516-31af-4298-8ff5-df55a2131226 12/25/2013 6:31 PM
bp-04a92a13-d6b3-47f7-aa37-b56d72131217 12/16/2013 10:21 PM
bp-5c85cb00-9db0-4eb1-80d6-23a872131215 12/14/2013 4:02 PM
bp-99643734-7769-471a-8d36-cc0ab2131213 12/13/2013 12:09 PM
bp-025073e7-7a73-4236-bc01-2c5eb2131213 12/12/2013 7:07 PM
bp-82bfde0a-531f-4faa-b4bc-957862131128 11/27/2013 11:40 PM
bp-ec72d9f0-930d-417f-a446-425cb2131117 11/17/2013 2:50 PM
bp-3fb585c9-b797-458a-a849-bc2c92131109 11/8/2013 8:24 PM
bp-e4ce1523-c5fa-4017-9174-466812131010 10/9/2013 5:16 PM
bp-caf97d83-9489-444b-ba57-28e5e2130918 9/17/2013 8:15 PM
bp-c62a7e4c-180c-47c8-926b-b91ec2130911 9/10/2013 8:05 PM
bp-e3535f33-e11d-42bf-97e9-7dc1a2130826 8/25/2013 7:28 PM
</nowiki></pre>

Can I use a Sony all-in-one PC/TV as a second display for the G5?

I'm trying to build a pro music system out of my G5, which means that it should only have music software on it. I have an aluminum 20" display hooked up to my Radeon x800T video card, which has one DVI and one ADC jack on it. A pro music rig needs two 20" displays, at least, to display all the mixers, processors, instruments, etc. I have to use a PC for my financial stuff and need a new one. The new Sony Vaio VGC-VA 11G is their version of the i-Mac G5, it's all-in-one plus it is a 20" LCD TV with S-video and composite video in, not VGA in. If I get an ADC-to-VGA adaptor and hook that up to a VGA-to-S/video & composite adapter (all on ebay!), can I plug the output of the G5 to one of the video ins on the Sony Vaio and then use the Sony Vaio's TV as the second display (not simply mirroring the Apple display)? I guess it would be the same as using an LCD TV as a second, non-mirroring display. If it works, it's going to be cool!
Power Mac G5 Mac OS X (10.4.2) Dual 2 Gghz (not quad), 3 Megs Ram, ATI Radeon x800T 256

By reading the user's manual, it appears that is possible. Download the User Manual from this link:
http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-b-series-all-in-ones/id...
Chapter 1.1
With the computer off, turn on the monitor, button farthest to the right.
Next button to the left of the on/off button, controls the input. Cycle it until you see HDMI in.
I don't have B520, but I have an A310 and it works the same. I hope that works for you.
Good luck!
cb2011

I have used still photos to make a Quick Time movie using FCE. The DVD made using i-DVD looks somewhat grainy and the motion isn't smooth when played on my TV. Other DVD's I have made play much better and I am wondering if the problem is my Quick Time m

I have used still photos to make a Quick Time movie using FCE. The DVD made using i-DVD looks somewhat grainy and the motion isn’t smooth when played on my TV. Other DVD’s I have made play much better and I am wondering if the problem is my Quick Time movie settings. The Dimensions and size of the problem movie are 1920X1080 and 584 MB respectively, while the movies that play better have Dimensions of 853X480 and are about 1.3 GB in size. Is this the source of my problem and how do I change things for the better.

Are you exporting to QuickTime Movie, or to QuickTime Conversion? For iDVD, you need to export to QuickTime Movie. Exporting to QT Conversion will kill the quality if you are moving the video from FCE to iDVD.
The file size per se makes no difference.
What size (pixel dimensions) are the photos that you put into your 1920x1080 sequence? Also, exactly what are the sequence properties ... is it 1920x1080i60 ... or i50? In North America it should be i60.
853X480 is an odd frame size. Where are you seeing this number? It would appear to be DV-NTSC, which has a frame size of 720x480. Your 1920x1080 frame size would not be DV-NTSC, it would be Apple Intermediate Codec. DV and AIC will look different, for sure.
Also, your quality setting in iDVD can affect the final video. You may want to check that also (in iDVD Preferences > Projects). Set it to Professional Quality if at all possible.

My daughter created a movie using iMovie, which she has worked on for a month, when trying to save it on a jump drive she was asked to "finalize" the movie...now there is no record of it at all. Any ideas how I could try and retrieve the file?

My daughter created a movie using iMovie 11, which she has worked on for a month. When trying to save it on a jump drive she was asked to "finalize" the movie, and while this was running (quoted 13 hours!) she received an error message. Now there is no record of it at all, I have looked in trash etc. Any ideas how I could try and retrieve the file?

The file cannot be reloaded in iMovie using File > Open Recent ??
There is no trace of the file in a Spotlight search?
The project files are not under <user>/Movies/iMovie Projects ??
Finalizing creates small, medium and large version of the finished video. It does take a long time, but it should not destroy your project files.
Oh, and you really MUST have a backup of your files. You can expect to lose files if you have no other copies of them.

Movie recording in quicktime using x264encoder codec

quicktime pro has the option to record a movie at best (H.264) quality. I would like to use the x264encoder codec since it is much more efficient. How can i record in real time using this codec ?

QuickTime Pro includes "preset" (no options) for the "One Click" recording feature.
Short of hacking the software (probably a simple Property List edit) there is nothing you can do to use a third party codec.

I cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!

i cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!

Unless you're trying to tether your phone to your computer or create a personal hotspot, it won't pair with your computer by bluetooth. File transfer by bluetooth is not supported. So, you can quit trying unless you're trying to tether.

Bought a new Sony Vaio Windows 7. After using Windows easy transfer Adobe X will not open.

I purchased a Sony Vaio laptop and after using Windows 7 Easy Transfer, Adobe X will not open. I have tried uninstalling and reinstalling a number of times with no resolve. I get a nessage that says Adobe has stopped working and a further message that says Incompatible application

Did you already try to delete the photo cache? iTunes: Understanding the iPod Photo Cache folder

How to connect I pad with lap top Sony Vaio

Hello,
I have an Ipad and I would like to connect it with my Lap top Sony Vaio with using the bluetooth system. And the problem that I have, my computer ask me to insert the disk and I have not this disk.
How I can do with out this disk.
My computer is with Windows Vista
Thanks for your answer

To answer your original question, you can connect your Sony Vaio with your iPad using the cable that came with your iPad. Bluetooth connectivity is not supported. You move photos and other documents from your laptop to your iPad with iTunes which can be obtained from the Apple website for free. The iPad is not like another computer or a disk that you can connect to your laptops.

Track ID keeps opening when watching a movie using the noise cancelling headset

When I am trying to watch a movie using the noise cancelling headset, the Track ID app keeps opening/starting and tries to identify the "track" I am listening to. I stop the recording and close the Track ID app down but it immediately opens again and this happens multiple times in a row. It stops after 10 or so attemtps and seems ok for a while but will do this again 5-10 minutes later. This also happened when I was listening to a 3rd party app which plays relaxing sounds. It seems to happen more often when there is loud background noise (on the train and someone opened the window), but Track ID has opened with out me starting it with very littel background noise... It is very annoying when you are trying to watch a movie or downloaded TV show etc.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
If this is only happening when you have a specific accessory attached, please try this: Main Menu > Settings > Apps > Smartconnect > Clear Data.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How do I export a movie using a different format (iMovie 2013)

Title question. I can only seem to export my movie using .mp4 and I've seen on youtube using previous versions of iMovie being able to change the format...
I use a Sony DSC-HX20V to capture my footage which formats the videos in AVCHD and it records in an image quality of 50p. I want to also know how to import these videos onto a 4th generation iPod Touch and which format will support the device better. Thank You.

Although I don't use it myself, saving to Theater creates versions for all sorts of devices including iPod Touches.
iMovie 10 help says:
"When you add a movie, trailer, or clip to the Theater, iMovie creates versions of your movie tailored for local playback (1080p HD), playback on an iOS device (720p HD), and web streaming (480p SD)."
Geoff.

Shift+ some keys missed in jumanji, dwm on Sony Vaio F12

I have a strange issue on my Sony Vaio F12. Shift + some keys seem to become <some keys> only. For example Shift+space in jumanji is interpreted as Space only. Shift+Mod4+Ctrl+Q in dwm isn't caught properly, while Shift+Mod4+Enter is. xev seem to get it right, though. The state is 0x0 when pressing Space only, and 0x1 at Shift+Space.
(Note: I'm currently moving to a fresh Arch install (x86_64) on a new computer. These key combinations, including the dwm one, worked fine on my old 32bit install on a Dell XPS m1330, so the configs should be right).
Any ideas?
Thanks in advance,
halhen

Thanks for the suggestion about customizing function keys, however, since the keys currently do nothing there's nothing to be re-mapped. (Such as VolumeUp => Page Up.)
As far as I can tell, use of the Fn key actually blocks the arrow key press events on the Yoga, so not even Up, Down. Left, Right presses are received by the OS if/when the function key is pressed. (This be can verified in any basic text editing program such as Notepad. Additionally, I wrote a program to display any/all received key events and confirmed no event occurs in such cases.)
The keyboard firmware or driver must be receiving the key state changes but simply ignores any arrow key event if the function key is pressed. I suspect any change to this behavior would have to come from the firmware or driver, which currently intercepts the hardware button presses before the OS may have a chance to redirect them. So I think the Lenovo hardware/software guys would have to enable this, which I figured it wouldn't hurt to ask.
I like the use of the function key in conjunction with the arrows because that way I don't need to move my fingers off the arrow keys in order to move the text cursor to the beginning or end of a line. (I certainly still find the fixed Home and End keys on the keyboard necessary.)
(Oh, and I apologize for inserting an image >50k, I didn't know the forum rules concerning a maximum image size.)

8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System

Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]

================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

Recording a movie using a Sony Vaio Motion Eye?

Similar Messages

Maybe you are looking for