Recording a Voice Over on FCP

I never had a problem before with this. I used to go to tool, click voice over and record and I would start talking. Now when I press record an error shows up. "specified capture destination file already exists." Can somone help please????

Your version of FCP would help.
Using FCP7, I just tried the VO tool. Works so I cannot help you, sorry.
Just to be clear, you must have a sequence open.
bogiesan

Similar Messages

We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

Badger33rk wrote:
Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases.
turn the Ducking menuItem off

Logic Pro X - How do I record my voice over existing tracks (via a mike and audio interface) without hearing those tracks on the speaker. I have headphones plugged into the interface but it doesn't stop in coming out of the speakers?

I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?

Hi Kevin, what kind of audio interface do you have?

I am trying to record a voice over in my imovie project

I was always able to record a voice over in imovie in the past, but on my most recent project which has 240 photos in it and a little video, I am no longer able to record voice over. I was able to record voice over for a little bit, but then it stopped working. I tried going on another project and was able to record a voice over. I am thinking that the problem may be that the project is too big. What do you guys think?

Try highlighting the thumbnail of the slide you want to play, before clicking 'play'.

Recomendations for Recording Quality Voice Over in Captivate

We have been working with Captivate to create training
materials for about six months and like it a lot. We are using a
lot of voice overs in our trainings. At the moment I'm using a mid
to low range headset to record the voice over. It is a step up from
your cheap VOIP headset but still isn't a high end model. It cost
about 30 euros. The quality is acceptable but could be improved
upon.
I was wondering if anyone has any recommendations about
headsets/microphone recording equipment to optimize the quality
when recording voice in Captivate. Are there also any
recommendations about what sort of software is optimal? Are some
sound cards better than others etc? I've tried to find this info in
the Captivate documentation but haven't found any recommendations.
If anyone could give me your own experience or point me in
the right direction for any Adobe recommendations I'd appreciate
it.
Many thanks,
Aimee

Don't use Captivate 2 or 3 built in audio recorder, it
introduces the degradations you experience. We use Adobe Audition
(now Soundbooth) to record and then simply import to the library.
You could of course use any external recording program, just don't
use the Captivate internal recorder and you will get pristine sound
everytime.
To rerecord or add more to the recording simply right mouse
click from the library and it will launch Audition. Mono 44.1khz,
700 or better kbps for voice recording will result in an excellent
hiss free, no start or end click sound when you play. You must then
find the recording after you have saved your edit in Audition and
right click to update the new changes. It will update the file in
the library and the slide together.
When saving your recording use a naming convention such as
module 1,chapter 1,slide1 (M1_C1_S1) that way multiple slide 1
recordings will not confuse you in the library when there are
multiple slide 1's from different chapters.

I want to record my voice over a karoke track, how do I listen to the song while recording my voice simultaneously?

I want to record my voice over a karoke track, how do I listen to the song while recording my voice simultaneously?

What's your setup? Normally you hear all tracks (that are not muted) in your headphones while you record a new one.

Trying to record a voice over

I'm trying to record a voice over using a focus rite scarlett 2i2 and a mic. when I record, it only plays on the left speaker. how do I record in both channels and not just the left one?

If you are recordind a voice over it will be in mono so it will only be recorded on a single mono channel. If you want to hear it out of both speakers you will have to pan that channel to the centre.

Why won't my iMovie record my voice over? I have a previous voice track that I recorded yesterday that worked, but today it won't.

Why won't my iMovie record my voice over? I have a previous voice track that I recorded yesterday that worked, but today it won't. I tap the necessary place each time, and tap it again to stop recording...has anyone ever had that problem before?

Hi
Will You try
A. Do this Voice over in a brand new Project
and if this doesn't work
B. trash iMovie pref and try again
I have a very faint memory of problem when adding two or more voice over to one project - but it can all be just a bad dream. (It's a function I never use - I use a miniDV Camera or other recorder to do my narrative - then import this as .aiff audio and use this in my movies as any other audio without any problems - so it's a totally different way to handle audio in all)
Yours Bengt W

Recording a Voice Over w Kona3 xlr in FCP 6

hello all
i've got a fcp 6 setup with a kona 3 card and want to record Voice Overs straight into the timeline but am having some difficulties getting any results.
The system is brand new and the card is installed properly but i'm not sure what i need to do to set the XLR 1-2 to be audible in FCP.
Currently my mic is cabled to XLR 1-2 and with the kona 3 control panel the Audio Input Select is AES/EBU (XLR) map channels 1-2 to 1-2. The other option is Embedded 1-16. I'm pretty sure this is correct and mapping the XLR inputs appropriately.
Within FCP my capture preset is AJA Kona3: 720p 59.94 DVCPro HD. Though i'm not sure if the capture preset effects the voice over tool.
Within the VO tool:
source: AJA Kona
Input: Aja kona (doesn't allow a specific channel)
in/outs are set on sequence. "ready to record' is displayed but i have no levels.
any insight is appreciated as i am a little green with the kona card.
Thanks
/j

I'm not sure the AES/EBU xlr inputs will work with a mic plugged directly. This is actually intended to be a digital format - see the wiki here:
http://en.wikipedia.org/wiki/AES/EBU
A mic plugged directly into this jack will not provide the compatible signal. I use a Kone with a breakout box that includes analog XLR inputs, but these are differentl. You may have some additional options. You need to convert the audio to digital to use the AES or "embedded" digital audio. If you have a deck connected you may bbe able to use the analog inputs on the deck as a bridge to get to the Kona.
If you are planning to use the VO tool, you may be recording scratch VO until the script is finalized... in this case, or even if this is intended to be the final audio, you can also hook up an adapter to use the Mac's built-in audio input as a source, in whic case the A/D conversion happens on the Mac's audio card.
Additionally, you can use a DV or other firewire-compatible camera as a bridge to get digital audio in via firewire.
Hope this helps -
Max Average

How can I record a voice over and save as MP3?

Good morning! I do voice overs. In my studio I STILL have a PC and use adobe audition. For my day to day business I know have a MAC BOOK PRO. I am going on vacation and need to record on my MacBook Pro with Garage Band.
I have successfully set up my Mic(studio Projects C1) and my travel PreAmp (MAudioDuo) to record in Garage Band. All I need is dry voice. I have recorded a track but need to save is as an MP3. The test track I recorded is about 15 seconds long but yet plays for 30 seconds...I have deleted everything after the voice but it still seems like the track is longer. I have to put in MP3 format. How do I do this? This is a nice program but looks like it is too much for what I need it to do. So, any other recommendations on more appropriate software is appreciated if needed.
Message was edited by: suesmac

yet plays for 30 seconds.
move the end of project marker to the 15 second mark:
http://www.bulletsandbones.com/GB/GBFAQ.html#eos
I have to put in MP3 format.
when you "share" it, tick the Compress checkBox
any other recommendations on more appropriate software
any audio editor could be used as well:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors

Best way to do a voice over in FCP

I want to do voice overs--usually I just record into my minidv cam, and capture keeping just audio. Can I just plug a digital mic plug into my G5 and start rockin?

Yes you can.
As you found out.
I've actually used some usb microphones that were grafted from ViaVoice
best wishes
David
go zags

How Do I Watch/Preview Movie and Record Audio (voice over) Simultaneously

First.. thank for taking the time to read this post -- much appreciated.
I located another post that someone reported which is almost identical to issue I am experiencing with Garageband. Here is the link
http://discussions.apple.com/thread.jspa?messageID=4741084&#4741084
I have attempted to follow through the solution that was provided, however I was unable to successfully resolve the issue.
Essentially, what I would like to do is this. After importing my iMovie project to Garageband, with a use of a Mic, I wish to record a commentary audio track or voice over while I watch my video/movie in the Movie Preview pane from the Track Info window at the same time. I can not rely on the Movie track line as my preview or movie window to watch the movie.
However, for some reason, I can not figure out how I can get the movie preview pane to show/display while I am recording. To help illustrate my problem, I have I posted a video of the issue. Please feel free to view the video and help me understand if this is by-design behavior in GB or a bug or simple 'user error'
http://video.google.ca/videoplay?docid=-3496774833411051076
Appreciate your immediate help
Thank you!
Rami

Hey Hangtime, give you permission to kick me in the head! I feel stupid now knowing that it is a silly user error. Here I was trying to figure out if its in the 'Details' frame.
In otherwords, 'Detail's is set to '>' and not pointing downwards.
Funny thing is, you would think there would be a scroll bar to move up and down to reveal the Movie Preview frame if the 'Details' pane is expanded in the Track Info window.
In any case... Thanks HT!

Recording Levels are low after recording a Voice Over

I plugged my Microphone into the computer and opened up Soundtrack and saw that My Microphone was working. I hit record and started speaking into the Microphone to record my voice. I hit record:
1) The VU meter was giving me levels. I recorded my voice and then pressed stop.When I played the recording back, the levels were really low.
How can I get the recording to be a bit higher? I am using it for a Voice Over. What am I not doing correctly?
Thanks in advance for your help

My customer is having a simlar problem with 2106 controller and 1131 AG access point.
After I upgrade the controller for 7.0.98.218, the access points was setting automaticly by controller with power level "0".
When its happening I see the follwing logs
Thu Dec 15 12:19:15 2011 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:3a:98:19:e7:c0 Cause=Heartbeat Timeout Status:NA
70 Thu Dec 15 12:19:15 2011 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:3a:98:19:e7:c0 Cause=Heartbeat Timeout Status:NA
Can You help me?
thanks, Murilo

Recording the Voice over

Hello,
I came across the voice over feature on my iPhone and was wondering if there was any way I could record it saying something with my voice memo feature?

If you simply want to change the command used, or add an extra command that does the same thing, you just need to know that the file names are used as the name of the commands for Speakable Items.
If you open system preferences, the speech pane, select "Speech Recognition" at the top and then "Commands" on the next line there's a button there - it's labeled "Open Speakable Items Folder". Click on that and it shows you a folder containing all the global commands. If you want to change one of these, you can edit the file name. It's probably safer if you duplicate the file ("duplicate" from the context menu) and then change the name of the copy, so the original is still there in case of mishaps! I'm not sure if a comma in the file name would work but I suspect it wouldn't - none of the commands there have commas in them.
If you want to change a command in a specific application then open the "Application Speakable Items" folder and explore from there.
Another thing which might help is to go back to System Preferences and click on the "Global Speakable Items" in the command set list and then click the "Configure" button. There's an option there which will make more variations on the commands work.
The most complicated way is to write your own new speakable items. This gives you the most flexibility but also you need to learn some AppleScript to enable you to do it. If you want to learn AppleScript, check out the AppleScript resources - it does lots more than just speakable commands and the general resources should help you most.
Best of luck!
Ricky

How to use voice over in FCP

hi,
anybody who is kind enough to explainn to me how to use the voice over in final cut pro.i m so new to this software.
zena

Hi,
welcome to the posts. You may want to pitch this question into the FCP forum for better results.
thanks
adam

Recording a Voice Over on FCP

Similar Messages

Maybe you are looking for