Recording Action for Swatch Pattern creation

Hi !
I'd like to record an action in Illustrator CS6 for adding a swatch pattern but I have a problem for specifying options.
Here is what I do :
Open a document containing (for instance) a rectangle filled with what will become my new swatch pattern.
Go in Window > Actions. Add new action, name it and start record.
Select All
In Action window menu, select "Insert menu Item"
Go to Object > Pattern > Make
This is all fine at that point. The swatch is created and I can find it in the swatches window. The problem is I'd like to record a change in the "Pattern Options" window (changing default Copies from 5x5 to 1x1).
I can't record this last action.
Would anybody have an idea on how to do this ? If it's not possible via actions, is it possible via js scripting ?
Thanks in advance,
Jim

Intrestingly enough when I record the Action in CC the Action looks like this:
Then I quit Illustrator CC and launch again and the Action no longer works. Here is what the Action looks like in the Actions Panel after quiting Illustrator and launching it again:
The Select All Unused goes away. Curiouser and curiouser.

Similar Messages

Record action for "Fit to artwork bounds"?

Hi,
since there is no short cut for the very usefull (but hidden) function of fitting the page to the artwork bounds I tried to record the steps with an action.
I create a new action and selected page setup in the menu and shrinkt to bounds of the page by selection the second option (Fit to artwork bounds) from the toolbar menu on the top.
But nothing happened - not a single step of this process was recordes by the action.
How can I create an action for this?
Is there another way to create a shortcut for this very useful feature?
Thanks
Konrad
P.S: I use Illustrator CS4

Since FitArtboard to Artwork bound and Fit artboard to Selected, are available under object->Artboard menu , you can definately Create a customized shortcut for this functionality and use them
to create a customized keyboard shortcut do this:
Edit->keyboard shortcuts->choose menu commands->object->Artboard-> double click on the " Fit to Artwork Bounds" in the line of shortcut column and provide a custom shortcut.
Thanks

Info record mandatory for shopping cart creation in SRM classic scneario

Hi Gurus,
We are creating shopping cart in our SRM 7.01 system in classic mode. We have not created any info record for the product category and vendor in the backend ECC system.
Do we need create an info record for the particular combination of material group/material and supplier in the ECC backend system so that the shopping cart in SRM classic scenario creates a PO directly in the system?
Thanks and regards,
Ranjan

Hi Sam,
Thanks for your update. So, what you mean that the SRM shopping cart with a direct vendor or contract can create a PO directly in the backend system even if the backend system does not have nay info record for the particular combination of the material and vendor.
Thanks and regards,
Ranjan
Ranjan Sutradhar

Actions for All users - Detection Problem

I have created some action in illustrator and copied in the Presets\Actions folder. But it is not detecting for all users. Is there any way make the recorded action to be detected for all users?
Version: Illustrator CS2 and CS3 Windows XP SP2
The same way I did for photoshop is detecting recorded actions for all users after copying to default action folder.
Thanks,
Selvakumar

Check the permissions on the files themselves. They certainly do not inherit the properties of the folder and thus are not readable by all users. "System" and "Everyone" should possibly have full access in that case.
Mylenium

How do I create outlines for created pattern (or swatch) for laser cut?

Hi,
I can't figure out how to create outlines (vector lines) for my patterns , as I need to laser cut the pattern, and all the lines have to be seen,
Please help!
I use Illustrator CS6.

mer,
What happens if you Object>Expand?

Illustrator CS6 Pattern Creation Question

PLeAsE, can anyone at Adobe (or anyone) say that the new Pattern Creation tool allows for use of symbols? I use them all the time for repeats and are a HUGE help when it comes to changes.
Please, will Pattern Creation utilize this? Just yes/no…
Thanks!

I have no idea. In the mean time, have you thought of building your pattern as a symbol and draging the symbol to the swatch panel. The symbol will expand, but you can always updated it by editing your symbol and updating the pattern. I use this technique for editing brushes. It sure beats dragging the brush out each time it needs to be updated and I can use blends, which are automatically expanded when converted to a brush (since brushes don't accept gradients, at least in CS5).

Record actions bug. does not execute the dont save action even though it acknowledges in action list

i am using macbook pro running Lion
so i am trying to save a series of actions that i want applied to a batch of images. i do all the actions correctly (i've done this before in earlier version of photoshop). stop recording my actions, and open the same image to make sure the automation process works properly and i get the same image through automation that i got when building my actions. one
of the actions is cutting and pasting a portion of the image in a different location, yet during the automation it always ends up somewhere else, and not in the same place, which makes no sense. another issue is during the recording of my actions i close out of all the files b4 i stop recording and click dont save. so this should be automated, but when i run the automation it prompts me to click dont save which it shouldnt do. i cant sit at the cpu and click dont save for thousands of images. whts the point of automation if i have to actually do something. stupid program. and i can clearly see in the list of actions tht it recorded me clicking dont save yet it still prompts me every time. i really do hate cs6. i wld install my old photoshop but b/c i have lion it doesnt support it... of course.. *rolls eyes*

@conroy - one of the actions means one task in an action (see screen shot).
@noel - i am able to run my action properly when i "play selection", but when i try to run a batch of images through the "automate" function is when the issues begin to arise. at least most of the issues.
i would insert an image to show what i did, but i cant seem to get that to work (on my pc or mac... weird). i loaded it to my fbook page and u can view it by following the below link
https://www.facebook.com/photo.php?fbid=750482081505&l=4d1bb044bd
you can view an image of what i did here.
so in detail what i am trying to do is:
record an action of the edits i make to a raw image so i can then run that same action on a batch of thousands of images via "automate." the specific tasks i am trying to complete during my action should be visble in the link i provided. to explain in detail what is occuring that is being recorded as an action:
1)- i press begin record
2)- I am open a raw image
3)- there is a time stamp in the image and i select and copy the time stamp from the corner of the image
4)- i then open a new document and past the time stamp into the new document
5)- i then increase the size of the pasted time stamp by about 3x by changing the resolution
6)- i then go back to original image
7)- i crop the original image to exclude the time stamp and other superflous things on the edges of the image
8)- i then rotate the original image 90 degrees CCW
9)- i then go back to the new document w/ the time stamp and select the time stamp with the marquee tool, so I can copy the time stamp to the original image
10)- i copy and paste the time stamp to the original image, i use the "move tool" and move the time stamp to the top of the original image.
11)- i then flatten the original image (i thought when this was done this is essentially combining layers, so there should be no possibility of the edited time stamp moving around as it has been flattened onto the original image)
12)- i then save the original image (that was flattened w/ the edited time stamp) as a .jpeg As part of the save process i also select the resolution.
***issue***
so i am now having an issue on this section as well. as you can see in the link i provided i have told adobe to do all this, yet now at this section it prompts me to make a decision about the resolution (i.e. press "ok").
13) -after this step i then select "close all" from the file menu which closes the original image that i just saved and prompts me if i want to save the new document i created for the time stamp i edited
14) - i select "dont save"
15) -i press stop record
16) - i then go to the folder where i saved the file i just edited in photoshop and change the name.
17) - i start the action process to see if i can replicate the manual actions i just completed through automation. i have no issues replicating this when i manually start the action, except for my issue w/ the time stamp detailed below.
***issue*****
when i do this the time stamp that i edited and pasted back into the image is not in the same place. i have only gotten it to be in the same place once, and the only thing i did differently was continually re-create the above action in the same manner. each time i recreated the action the time stamp was in a different place and one time it was finally in the place i moved it to.
18) - after checking that the action works, i then attempt to automate a batch of files
19) - i select file -> automate -> batch
20) - in batch i choose the folder with the original raw images that i now want to run the action on and also select the folder where to place the altered images
21) - in the batch menu i do not have any of the boxes checked (i.e. suppress color profile warnings, etc.)
22) - i select "ok" and the automation process starts
this is where i run into issues. originally i would get prompted @ step 14 (above) instead of the automation process just reading the task in the action that says select "dont save". somehow i do not get prompted there anymore. now i get prompted at step 12. it saves its as jpeg, but instead of completing the save process, at the resolution screen it prompts me to select "ok" instead of reading the task in the action that says select "ok"
i have created new actions for the images i collect since CS4 and CS5 and i have never run into any of the issues i have described above. i appreciate any and all help you can provide, as it currently stands i am pretty upset b/c i have wasted an entire day or productivity messing w/ what appears to be a buggy program.

Is there a voice recording app for ipad that shares directly via iMessage (not just email) - like voice memos does on iphone?

Does any-one perhaps know whether there's a voice recording app for ipad that shares directly via iMessage (not just email) - like voice memo does on iphone?

You can't do anything in the background of iOS. Apps are still one at a time (with a few exceptions like Music), and suspend when the app is closed. It's also against the App Store guidelines to sell apps that would allow such actions.
Though, maybe you could get your Voice Memos saved to MP3's, which can play in the background of other apps.

How can I edit an Automator action for Word?

I'm running Word 2008 on a Macbook Pro, Mac OS 10.5.
Word comes with a selection of Automator actions, including one to find and replace text in Word. I often want to convert standard numerals to old-style numerals, which are part of the extended glyphs set in fonts I use. Automator will allow me to set up ten find/replace actions (for the numbers 0-9) that successfully replace all the numerals with old-style numerals. But it only does it for the main body of the document, not for the footnotes. I need to be able to do it for all the footnotes.
I thought I might find a workaround by adding an AppleScript to my workflow, which would shift the focus in Word to the footnotes and rerun the find/replace actions. I mapped the menu item View/Footnotes to the keystroke command-) and inserted this AppleScript into the Automator workflow:
tell application "Microsoft Word"
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
keystroke ")" using command down
end tell
end tell
end tell
But the find/replace actions simply repeat what they'd done before, converting the numerals in the main body but not in the footnotes. I then thought that perhaps I should have an AppleScript to do the find/replace itself, once the footnotes have been selected, so I created the following (command-H accesses the find/replace dialog box in Word 2008):
tell application "Microsoft Word"
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
keystroke "H" using command down
keystroke "1"
keystroke tab
keystroke ""
end tell
end tell
end tell
The character after the fourth keystroke command is the glyph for old-style numeral 1. For some reason Word reinterprets this as the letter a. So using AppleScript I can only replace the numerals 1-9 with the letters a-i.
I'm pretty hopeless at even this very basic level of programming, but I presume that there's something in the Automator action 'Find and replace in Word' that specifically tells it not to look anywhere but the footnotes. I also presume it's possible to insert a command to tell it to operate on the footnotes (and headers and footers: everywhere!) too.
Does anyone know a way to edit an Automator action? I'm willing to experiment and fiddle with one until I find a way that works, if nobody knows the exact changes that I'd need to make, but I just don't know how to edit an Automator action in the first place. A bit of googling suggests that I could do it in XCode, and that that is bundled with my Mac, but I don't have it.
This all used to work when Office used to allow VBA (and I was using a horrible Windoze machine). Maybe someone would prefer just to find a way of creating a solution our of the old code, so here's one part of what I used (to change the number 1):
For Each aStory In ActiveDocument.StoryRanges
With aStory.Find
.ClearFormatting
With .Replacement
.ClearFormatting
End With
.Execute FindText:="1", ReplaceWith:=ChrW(63281), _
Format:=True, MatchCase:=True, Replace:=wdReplaceAll
End With
Next aStory
Thanks in advance for any help.

Thanks to all three contributors for their generous help so far. Mac people are lovely.
BDAqua's suggestion wouldn't work, I think, because copying footnote text into another application and then back into Word would lose all the associations between footnote references in the body and the footnotes themselves. I wish I could do what Klaus1 says, but Word 2008 won't allow the creation of Macros any more. They've shut off support for their creation. Nice MS. red_menace's suggestion seems very plausible and I'll look into a way of mapping the old style numerals to specific keystrokes. That might do it.
Reflecting on what you all said, I looked again through Word's help menus and eventually got pointed towards this page of 'help': <http://tinyurl.com/6398l6>. This is completely impenetrable for me, though it does compare a VBA script for Word 2004 to an AppleScript. This encourages me to hope that it should be possible to translate my original VBA script (part of which I included in my first message) into AppleScript, though I don't know how to do it because I don't really understand the language in the first place (the VBA script was put together by someone else).

While doing LSMW standard method for Customer master creation..

while doing LSMW standard method for Customer master creation.....
In 13th step I am getting this king of error
FB012 Session 1 : Special character for 'empty field' is /
FB007 Session 1 session name ZPROJ was opened
FB109 Trans. 1 : Transaction xd01 is not supported
FB016 ... Last header record ...
FB014 ... BKN00-STYPE 1
FB014 ... BKN00-TCODE xd01
FB014 ... BKN00-KUNNR
FB014 ... BKN00-BUKRS
FB014 ... BKN00-VKORG A1
FB014 ... BKN00-VTWEG 00
FB014 ... BKN00-SPART 0
FB014 ... BKN00-KTOKD
FB014 ... BKN00-KKBER BP01
FB013 ....Editing was terminated
Can anyone help how to solve this?

Hello TJK,
FB012 Session 1 : Special character for 'empty field' is /
This is the special function in LSMW, for empty field system will put / sign automatically, so you need not to worry about that.
FB007 Session 1 session name ZPROJ was opened It is opening session ZPROJ which is your project name/object name.
FB109 Trans. 1 : Transaction xd01 is not supported
Check out your field mapping and conversion rule for object.
FB013 ....Editing was terminated
It is not finding proper field mapping rule / file inputs so the sytem terminates the LSMW object.
Check your field mapping and conversion rule, check your source fields, save the file in tab delimited format.
Hope this helps.
Regards
Arif Mansuri

BADI for return order creation in CRM

Hi group,
I have an requirement. In CRM ,Return order should be created from UBB service contract when change process takes place(Contract termination), ie throgh actions in the UBB service contract. these steps are configured through Actions.
The requirement is, I need to enhance the BADI implemention(COPY_DOCUMENT) by creating a function module. this function module should provide the necessary data for Return Order creation. Is there any function module to create a Return order in CRM or how to proceed? Appreciate if any suggestions
Regards,
Sankar

Hi,
You can use BAPI_SALESORDER_CREATEFROMDAT2 .
In import TESTRUN = X
Description
This parameter is a test switch.
If you activate the switch, the system does not save the document.
Value range
Space = Document should be saved
X = Document should not be saved
Default
Space

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

Can u tell me any predefined BAPI for change and creation of Material

Hi,
Can anybody tell me predefined BAPI for change and creation of Materialmasterand Pricing?
Thanks & regards,
Gopianne.

you can use the BAPI to BAPI_MATERIAL_SAVEDATA create as well as to change material master.
When changing material master data, you need enter only the material
number.
In the header data, you must select at least one view for which data is
to be created. Depending on the view selected, you must maintain other
required parameters. If you do not enter values for all of the required
parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first
be supplied with data by the calling program. An indicator must also be
set for each of these fields so that the data is written to the database
by the method. This requires the calling program to supply the
corresponding field with the indicator in a checkbox table (for example,
CLIENTDATAX). Checkbox tables exist for tables that do not contain any
language-dependent texts (MAKT, MLTX), International Article Numbers
(MEAN), or tax classifications (MLAN). Several data records for a
material can be created in these tables.
regards
vivek
reward points if it helps

In LSMW which method is exactly suits for Master Recipe Creation (TC-C201)

Hi All,
I am unable to find which method suits for Master Recipe Creation in LSMW.
Please send me in detail if any method suits.
Can any body help me in this.
Points will be awarded for correct answer which helps me come out of this problem.
Regards,
Shobha

Hi shobha,
if there is code u have to do before uploading go for BDC or BAPI,
it not go for LSMW (recording method) --> in this its very difficult to code.
Thanks

Document is in transfer for purchase order.Creation not possible

Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.

Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ

Recording Action for Swatch Pattern creation

Similar Messages

Maybe you are looking for