Recording actions made in scenarios

I'm creating a scenario using branching. I'd like to have a
report created that shows the options that each user clicked on
throughout the scenario. Is this possible?

I am creating a scenario. I'll want the user to email his
results to me. I don't care what form they take, I'll be able to
manipulate them to my advantage. I just want to know how to set up
this email transmission of the actions a user takes in my scenario.
I've reviewed Silke's simulation in Exchange, and I've tried
to fix it so that an email is delivered to me, but nothing happens.
Has anyone out there tried this before? I'm NOT using question
slides in my scenario.

Similar Messages

In PS CC, actions not recording settings made...

Hello people,
I could use your help in figuring out why in PS CC, when recording an action, it records adding adjustment layers but not the setting put in the adjustment layers. Help!

There are problems playing actions that add adjustment layers. There is also a difference between how old versions Photoshop recorded Adding adjustments layers an newer versions of Photoshop record adding adjustment layers. Old versions recorded a single step that identifies the adjustment type and included adjustment types setting used. Newer versions of Photoshop record two steps the first make the adjustment layer type and the second step make the adjustment type layer adjustment.
There is a potential problem playing actions that add adjustment layers since CS4. In CS4 Adobe added the Adjustment palette panel in its Fly-out menu Adobe has two options that change Photoshop default behavior of how Adjustment layers are added. Actions, Scripts and Plugin can not query these option or set them. Therefore adjustment layers may be added differently then how the automation is designed to work if these options are changed from their Adobe Default settings.
However adjustment layers are not always added the way these options are set. If there is an active selection active when and adjustment layer is added Photoshop will add a layer mask. It make no difference how the option is set. A layer mask will be included when there is an active selection. Also If you record adding the adjustment layer using the menu layer>new adjustment layer>type And in the New Adjustment Layer dialog you check clip to previous layer the layer will always be added clipped it makes no difference how the option is set. The adjustment layer will be added clipped when the box is checked the option is recorded into the action step. So it is possible to record actions and write scripts the work a known was and can be changes after the adjustment layer is added. However the does not help old recorded or even new actions that were or are being recorded in a more natural way. It is best to just forget these options exist and lean them at the default setting. That way Photoshop behaves as it historically work. .

Feature Request: Record actions in Photoshop Elements

I would sincerely like the ability to record actions. I can't find actions on the net that replicate my standard workflow.
Larry
Message title was edited by: Brett N

Please add a +1 here: http://feedback.photoshop.com/photoshop_family/topics/making_actions_in_pse

Action in Integration Scenario

Hi
I have a doubt regarding " Actions" in Integration Scenario in IR. I have an interface which is actually a clubbed one, there are two interfaces together and there are two sender interfaces and two receiver interfaces.
So how many should I create in Actions ? Should there be four actions ?
Ajith

Hi Ajith,
Yes, you were correct go ahead.
Refer the below link:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/68/88a440df800160e10000000a1550b0/content.htm

Recording actions like Macro ?

Hi,
Does labview has option to record actions like how we do it in Excel application?
Regards
Gopal

Hey DEV I think what he is talking about is will labview allow me to create a macro so that I can do the same thing over and over again. The answer is no. however i have seen some software on the Internet that will record repetive macro's (keystrokes really) so that you can do some of the functionality of a macro. But nothing to the caliber of what excel or word does. LV will run macro's for other applications such as excel or word but it does not have a built in way to do it on its' self.
Joe.
"NOTHING IS EVER EASY"

Recording Actions in PSE8

I'm familiar with recording actions in Photoshop and was hoping to do the same thing with elements. However, the only way I can work with multiple files being treated the same way is thru 'Process Multiple Files'. The drawback is that all files must be in the same directory. I'd like to work on multiple open files, possibly from many directories, saving to one directory, after being resized, for example.
Is there any way to record actions and apply them to open files? Thanks in advance for any help!

By default recording actions in elements is disabled, but you can play some actions
recorded in photoshop, provided they use commands elements understands and some
scripts also work.
Think of File> Process Multiple Files, as photoshop batch with the Override Actions
"Save As" Commands checked all the time, when choosing the source and destination
folders.

Allow Tool Recording Action Problem with Pen Tool -PS6 beta

Hi,
I’m trying to create an action that will erase a shape layer box that I am using for a registration point.
I have “allow tool recording” on
I select the shape layer in the layer palette
Use the direct selection tool to marquee the box on the shape layer I want to erase
Use the pen tool to delete each anchor point
I do erase the box but when I play back the recorded action,
It will marquee and select the 4 box anchor points and even though the action dialog box says
“Use delete anchor point”
nothing happens.
Any ideas? Thanks.

The path selection tool selects the entire shape layer and won't delete it, I only want to select and delete a small portion of the shape layer. Thanks for trying.

Any talk of recording actions in a future PSE?

Hi all,
Well, after purchasing and installing PSE 8, I'm just now learning that we can't record actions or have any type of batch management.
Is there any talk about having this a feature in future PSE versions?
Thanks in advance!

Thanks for answering, Barbara, and I would have to agree.
I may leave some feedback... couldn't hurt.
I did learn that I could create actions with my Photoshop CS2 and then save them as ATN files and then load them with PSE...so at least that's something.
Thanks again!

Recorded ACTIONS not handling typography properly in PS6 beta

Recorded Actions are not properly rendering the scaling and placement of fonts when played back.
1) Go to http://www.psdcovers.com
2) Download any Action
3) Install and run "STEP 1 ••• Prepare Template"
The issue should be obvious and staring at you in the face when using PS6 beta. The fonts are not scaled and positioned as recorded in the Actions which work fine all the way back to CS3.
Sincerely,
Simon

Here is what they are talking about:
Action results from CS5:
Action results from CS6:
I also notice that the action is much slower in CS6.
But the thing is that loading actions created in previous versions of Photoshop into newer ones, you can't aways expect things to work exactly the same way. There is always the chance for something like this to happen. Especially with the changes to text handling in CS6. I did notice that the text is two different sizes once created between CS5 and CS6. I'm trying to pick apart the action to see what is going on...

Tracking records change made by another user or session

How does oracle forms track records change made by other user or session?

I think the question is, how does Forms know to issue the error "FRM-40654: Record changed by another user. Re-query to see change".
I don't know exactly how Forms knows this. But in the past I have found that if a column has changed on the record, which you are not querying in this forms block, then you don't get the error. So Forms is perhaps comparing all the database values for the queried record, against the values that Forms has queried?
When you attempt to lock the record from Forms, you'll see that Forms issues a statement
SELECT <all the db columns in the block>
FROM <wherever>
FOR UPDATE OF <all the db columns in the block which are not query only>
Even so, in the database, that statement doesn't know what the values are that the Form has already queried. So Forms must be doing something else.
Hope this helps, it's a bit of a black box area I guess.

Re editing a recorded action in PS cs4*

Hi, I threw these same words to the community forum and it returned nothing relevant to my query! Actually there were only 2 entries. However in Google I got many accurate and relevant answers, the problem is that it does not work for me. I know i would have been much quicker to re record the whole action to solve my problem.
My problem is that I made a new folder that I call "photo manipulation" and moved my "save" folder into it with the new droplet I created. So the action can not any longer save in its original path and my photos get stuck, not even manipulated in photoshop! ,
All I wanted was to add the new folder in the "save" path between two forward slashes.
The answer apparently is to double click on the action's relevant portion and enter the new value. As indicated in this segment "Overwrite a single command" as copied and pasted below.
"In the Actions panel, double-click the command. Enter the new values, and click OK."
This does not work for me - when I double click on an action command I get a pop up from "Adobe Photoshop CS4 Extended" with the yellow exclamation mark and
[The command "SAVE" is not currently available] Continue Stop
and there is nothing more happening whatsoever.
As said b4 I would have been faster to re record but I'm curious why this edit won't work for me thank you.

Is a file opened? I'm not too sure what you mean here. But I have got PS running I have dropped files in my droplette and as said they only get open in PS and the action seems to stop here as it does not recognise my new folder (of course it worked before). I do know this happens because I created an action to reduce photos by 25% before I made a new folder. then decided to do one for 50% but, to tidy my desktop put destination folders and droplets into this new folder (called "photos manipulation") then recorded my 50% action. As a result this one work but not the other.
And for Noel, I have my droplet and destination folders that used to be on the desk top, now on the desktop but in a new folder. and do understand my path in the action "save" should have this new folder included in it. So according to the instruction I saw, I though all I need to do is double click on the path of the save command and then include the new folder in the path.
Again I'm not sure about the meaning of "document being in the same context..." The way I see it, it's not any more in the same context since I have added a folder, but I thought this was the point to edit the command of an action, in this case to change the path to match its new and actual situation.
Obviously there is something I missed or don't understand in this process. Or perhaps editing in this situation does not work? Thank you for your help anyway.

Record actions bug. does not execute the dont save action even though it acknowledges in action list

i am using macbook pro running Lion
so i am trying to save a series of actions that i want applied to a batch of images. i do all the actions correctly (i've done this before in earlier version of photoshop). stop recording my actions, and open the same image to make sure the automation process works properly and i get the same image through automation that i got when building my actions. one
of the actions is cutting and pasting a portion of the image in a different location, yet during the automation it always ends up somewhere else, and not in the same place, which makes no sense. another issue is during the recording of my actions i close out of all the files b4 i stop recording and click dont save. so this should be automated, but when i run the automation it prompts me to click dont save which it shouldnt do. i cant sit at the cpu and click dont save for thousands of images. whts the point of automation if i have to actually do something. stupid program. and i can clearly see in the list of actions tht it recorded me clicking dont save yet it still prompts me every time. i really do hate cs6. i wld install my old photoshop but b/c i have lion it doesnt support it... of course.. *rolls eyes*

@conroy - one of the actions means one task in an action (see screen shot).
@noel - i am able to run my action properly when i "play selection", but when i try to run a batch of images through the "automate" function is when the issues begin to arise. at least most of the issues.
i would insert an image to show what i did, but i cant seem to get that to work (on my pc or mac... weird). i loaded it to my fbook page and u can view it by following the below link
https://www.facebook.com/photo.php?fbid=750482081505&l=4d1bb044bd
you can view an image of what i did here.
so in detail what i am trying to do is:
record an action of the edits i make to a raw image so i can then run that same action on a batch of thousands of images via "automate." the specific tasks i am trying to complete during my action should be visble in the link i provided. to explain in detail what is occuring that is being recorded as an action:
1)- i press begin record
2)- I am open a raw image
3)- there is a time stamp in the image and i select and copy the time stamp from the corner of the image
4)- i then open a new document and past the time stamp into the new document
5)- i then increase the size of the pasted time stamp by about 3x by changing the resolution
6)- i then go back to original image
7)- i crop the original image to exclude the time stamp and other superflous things on the edges of the image
8)- i then rotate the original image 90 degrees CCW
9)- i then go back to the new document w/ the time stamp and select the time stamp with the marquee tool, so I can copy the time stamp to the original image
10)- i copy and paste the time stamp to the original image, i use the "move tool" and move the time stamp to the top of the original image.
11)- i then flatten the original image (i thought when this was done this is essentially combining layers, so there should be no possibility of the edited time stamp moving around as it has been flattened onto the original image)
12)- i then save the original image (that was flattened w/ the edited time stamp) as a .jpeg As part of the save process i also select the resolution.
***issue***
so i am now having an issue on this section as well. as you can see in the link i provided i have told adobe to do all this, yet now at this section it prompts me to make a decision about the resolution (i.e. press "ok").
13) -after this step i then select "close all" from the file menu which closes the original image that i just saved and prompts me if i want to save the new document i created for the time stamp i edited
14) - i select "dont save"
15) -i press stop record
16) - i then go to the folder where i saved the file i just edited in photoshop and change the name.
17) - i start the action process to see if i can replicate the manual actions i just completed through automation. i have no issues replicating this when i manually start the action, except for my issue w/ the time stamp detailed below.
***issue*****
when i do this the time stamp that i edited and pasted back into the image is not in the same place. i have only gotten it to be in the same place once, and the only thing i did differently was continually re-create the above action in the same manner. each time i recreated the action the time stamp was in a different place and one time it was finally in the place i moved it to.
18) - after checking that the action works, i then attempt to automate a batch of files
19) - i select file -> automate -> batch
20) - in batch i choose the folder with the original raw images that i now want to run the action on and also select the folder where to place the altered images
21) - in the batch menu i do not have any of the boxes checked (i.e. suppress color profile warnings, etc.)
22) - i select "ok" and the automation process starts
this is where i run into issues. originally i would get prompted @ step 14 (above) instead of the automation process just reading the task in the action that says select "dont save". somehow i do not get prompted there anymore. now i get prompted at step 12. it saves its as jpeg, but instead of completing the save process, at the resolution screen it prompts me to select "ok" instead of reading the task in the action that says select "ok"
i have created new actions for the images i collect since CS4 and CS5 and i have never run into any of the issues i have described above. i appreciate any and all help you can provide, as it currently stands i am pretty upset b/c i have wasted an entire day or productivity messing w/ what appears to be a buggy program.

Recorded action (in word:mac 2008) not working

Hello. Here's what I do: I create a new workflow in Automator (cmd-N) and choose 'Custom' as starting point. Then, I open a .doc (from word:mac 2008), then start recording, back to the .doc click somewhere into the open .doc window), click into a footnote, press cmd-A (selects all footnotes), choose Convert to Endnote from the contextual menu, save and close. (What I get is an action with three blank steps, namely step 1, 2, and 4. 1 would be clicking into the .doc window, 2 clicking into the footnote. 3 is: Press cmd-A. 4 is blank again, and I am clueless about what this one might be. 5 is Convert to Endnote, etc.)
I rename the action, and save it as an application. Then I drop the same file who's copy I used to record the action onto that application. In the menu bar (top of my screen), it says 'Watch me Do' for a little while (red octagon next to it), then disppears. I open this file I had dropped on the app, it's unchanged.
Appears to me I'm missing something so fundamental it's not covered by tutorials. Any advise? Thanks a lot.

that works, thanks.
Each action consists of two parts: one that starts with ––, then names the action (blank if no name for this step appears in automator), and the second that entails the description of the action itself.
I record the sequence again, leaving out the first click into the .doc, clicking into the footnote straight. Then I highlight all actions recorded by automator, copy, and paste into Script Editor. This is what I get:
delay 1.727666
set timeoutSeconds to 2.000000
set uiScript to "click UI Element \"Document Pane\" of window 2 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
delay 1.815997
set timeoutSeconds to 2.000000
set uiScript to "click UI Element \"Document Pane\" of window 4 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
-- Press ⌘A
delay 0.135988
set timeoutSeconds to 2.000000
set uiScript to "keystroke \"a\" using command down"
my doWithTimeout( uiScript, timeoutSeconds )
delay 1.657981
set timeoutSeconds to 2.000000
set uiScript to "click UI Element \"Document Pane\" of window 4 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
-- Convert to Endnote
delay 5.327995
set timeoutSeconds to 2.000000
set uiScript to "click menu item \"Convert to Endnote\" of menu 1 of UI element 1 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
-- Press ⌘S
delay 1.840010
set timeoutSeconds to 2.000000
set uiScript to "keystroke \"s\" using command down"
my doWithTimeout( uiScript, timeoutSeconds )
-- Press ⌘W
delay 2.583996
set timeoutSeconds to 2.000000
set uiScript to "keystroke \"w\" using command down"
my doWithTimeout( uiScript, timeoutSeconds )
on doWithTimeout(uiScript, timeoutSeconds)
set endDate to (current date) + timeoutSeconds
repeat
try
run script "tell application \"System Events\"
" & uiScript & "
end tell"
exit repeat
on error errorMessage
if ((current date) > endDate) then
error "Can not " & uiScript
end if
end try
end repeat
end doWithTimeout
That makes me ask two questions:
First: Why does it talk of window 2 and 4, when I had only one window open, and what I did while recording was one click into the footnote section and then go straight ⌘A?
Second: Automator doesn't realize that it's a footnote I click into, and that consequently pressing ⌘A selects all footnotes (not the whole main text). Since that doesn't seem recordable, a first step might be to write it manually—if such a thing is possible. Since Microsoft has deprecated VBA Macros and recommends using Apple Script instead, I hope it might. Is it? Or how else?
Thanks

Internal/External Action in Integration Scenario

Hi,
What is the simple logic of defining an Action Internal/External in an integration scenario.
For Instance, A Web application "A" is accessing "PS-EPS"(SAP) system to check the existense of Network.
What will be the type of Usage at both ends. Why?
Thanks,
Debashish Sarkar

Hi Ajith,
Yes, you were correct go ahead.
Refer the below link:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/68/88a440df800160e10000000a1550b0/content.htm

Actions in Integration Scenario

Dear all,
1. Can anyone tell the difference between Internal action and External action with respect to products and SWCV?
2. What is the Template option you find when you insert an application component?
Expecting your valid replies; if possible please send some documents or examples.
Thanks,
Harikumar. S

HI Harikumar,
Actions divide up the process flow of a business scenario. Actions in different application components can exchange messages with each other within a business scenario.
Internal Action
You can use internal actions in application components (of type Product Version or Main Instance) that (by using the product version) contain the same software component version in which the action is implemented.
External Action
You can use external actions in application components (of type Template or Product Version) that (by using the product version) contain the same software component version in which the integration scenario is implemented.
If you want to use an action to represent a function that is already installed in the product of the application component, use an internal action.
If you want to use an action to represent a function that is not yet provided by the product of the application component, use an external action.
In this way, you can enter functions in the integration scenario (for example, for communication parties) that are not yet provided by the product version of the application component.
All interfaces associated with an action are assigned to that action in the Integration Builder.
The exchange of messages between components takes places between two actions from different application components. The interfaces used in the exchange of messages are assigned to the two actions involved.
Cheers...
Vasu
** REward Points if found useful **

Recording actions made in scenarios

Similar Messages

Maybe you are looking for