Recording and listening at the same time?

So i'm recording using a usb micrphone, which works fine, i'd like to know how to hear all the instruments through my headphones and record at the same time, so i can actually hear when i need to come in to sing! any ideas?

JanKaratas wrote:
So i'm recording using a usb micrphone, which works fine, i'd like to know how to hear all the instruments through my headphones and record at the same time
you're going to have to provide more details on your setup, because that is how GB works.
you'd have to purposefully mute or solo tracks in order to not hear everything playing in your project

Similar Messages

Charge ipod and listen at the same time?

hi,
i sit at my desk for about 8 hours at work and would like to charge my ipod at my computer via usb and listen at the same time. is this possible? it's a pc computer here at work. and it does not have itunes installed and i don't see having itunes on it as a possibility.
i don't like having to charge it, wait about an hour, then listen for a few hours, then charge it again.
also, do you notice any battery "leakage"? i mean, i have some battery power at night when i turn it off, (yes, i do turn it off b/c the screen goes blank) and then when i get into work and try to turn it on, i get this battery looking thing and have to charge it.
it's possible that the ipod came on while i was walking (it's in my bag), but this happens too often for me to think that it does.

You'll need iTunes if you want to access your iPod and listen through your PC. Also you'll need to set it to manual update, see the articles below.
Using iPod with Multiple computers
Managing Your Songs Manually
When your iPod is in your pocket make sure you have the lock on to disable the controls otherwise it is liable to get switched on and use battery power.

How do I record AND monitor at the same time?

I'm having trouble while trying to record from my XLR connected microphone. I have the mic going through a USB preamp and my speakers are outputting directly through my Power Mac. I cannot seem to be able to record at the same time I monitor. I can't playback my recordings without first changing the audio setting to Built in Audio from Mobile Preamp. I swear I could do this with Logic 7. Can't I have the monitor be going through the computer and the input going through my preamp at the same time? Thanks!
Appi

Logic can see two or more audio interfaces at once, but it has to be set up in the Audio midi set up program on your mac, as an aggregate device using your built in audio and your USB device. Then you can choose the aggregate device in your Logic>preferences>audio>driver. After you choose it, you should be able to access all inputs and outputs at once
Don

Charge and Listen at the same time?

I am new to the IPOD experience, and I am listening to my IPOD Nano at work, without ITUNES. I want to listen to the IPOD and charge it at the same time. But it seems while the IPOD is charging, the "do not disconnect" icon is blinking, and I can't play any songs. The only thing I can do is "eject" the IPOD, and then I can listen. But even though it's plugged in, I don't think it's charging. I tried to download my music to some other media player on my office computer, but no luck. I am not allowed to download software, so I can't put ITUNES on my desktop. Any advice?

even though you "eject" your ipod, it is still charging. and listening to it while it is chargin is okay.

JFM recording and streaming at the same time

Hello Everyone,
I was hoping someone could help me with using a webcam device for sending and recording at the same time.
At this moment I'm only able to record. I tried to make another processor, and put the input of the streaming processor
to the one that is recording, but problem is the streaming processor outputs not a streaming format. If I could stream
with RTP I could embed a player in a website and view from there, while recording at the same time.
Could somebody explain to me what do to here, or provide me a snippet of code, I really need this to work.
I created this code, but this only records.
import java.io.IOException;
import javax.media.*;
import javax.media.format.*;
import javax.media.protocol.*;
public class Record {
     public Processor createProcessor(){
          Format formats[] = new Format[2];
          formats[0] = new AudioFormat(AudioFormat.IMA4);//IMA4
          formats[1] = new VideoFormat(VideoFormat.CINEPAK);//CINEPAK
          FileTypeDescriptor outputType = new FileTypeDescriptor(FileTypeDescriptor.QUICKTIME);
          Processor p = null;
          try {
               p = Manager.createRealizedProcessor(new ProcessorModel(formats,outputType));
               } catch (IOException e) {
                    System.out.println("Error! 1");
               System.exit(-1);
               } catch (NoProcessorException e) {
                    System.out.println("Error! 2");
               System.exit(-1);
               } catch (CannotRealizeException e) {
                    System.out.println("Error! 3");
               System.exit(-1);
          return p;
     public static void main(String [] args) {
          Record record = new Record();
          Processor p = record.createProcessor();
          DataSink sink;
          MediaLocator dest = new MediaLocator("file://newfile.mpeg");
          try{
               sink = Manager.createDataSink(p.getDataOutput(), dest);
               sink.open();
               p.start();
               sink.start();
               try {
               Thread.currentThread().sleep(6000);
               } catch (InterruptedException ie) {
               p.stop();
               p.close();
               Thread.currentThread().sleep(6000);
               sink.close();
          } catch (Exception exception) {
               System.out.println("error!");
          System.out.println("finished");
Kind regards,
Bluesboy89

Take a look at the following example. It demonstrates how to do 2 things with the same input (namely view and record)
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.html]

Charging and listening at the same time?

Is there a way to play and charge the Shuffle at the same time??

Well considering that the charging/data USB cable and the headphones use the same jack, it doesn't seem possible. Maybe a y-cable would allow it, but some of the contacts in the headphone jack may serve two different purposes depending if the iPod is charging or playing, so may not be able to do both at the same time.
On the other hand, you may be able to play the iPod through your computer while charging it. Set up the iPod for manual mode then if you plug it into a computer with iTunes installed, you can play music out of the iPod on your computer.
Patrick

How can I charge and listen at the same time?

I'm using a windows PC and the USB connector. If I plug the cable in, iTunes automatically opens and I get the "do not disconnect" message and can't play music.
If I eject my iPod from iTunes, it doesn't charge anymore.

You can listen to the music on your iPod through iTunes. Just click on the nano icon where the library and store and playlists are and hit play at the top. If you want to listen to it while charging, you can do that by using a wall adapter to charge. I do this at work when my battery starts to get low.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
NOTE: You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

Recording vocals and guitar at the same time, using the Alesis IO dock!

Hi there!
I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
Hope someone can help :)

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

Hi John,
I think the only way is to get an iMic...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

Recording audio and midi at the same time ??

Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
Dan

Daniel,
You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

How to record midi and audio at the same time?

Hello,
I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
Thank You.

Hi
Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
The audio track must be 'Record Ready':
HTH
CCT

Recording and listening at the same time?

Similar Messages

Maybe you are looking for