Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Similar Messages

  • Recording audio and midi at the same time ??

    Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
    Dan

    Daniel,
    You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

  • Recording Audio adn Midi at the same time

    Hi
    I'm having issue recording MIDI and audio at the same time. I'm basically trying to play my keyboard and sing at the same time.
    The manula sas I just need to arm whatever tracks I want and off I go, however when I arm the audio and the midi tracks it only records the MIDI (or whatever track I have highlighted in the arrange window. If I highlight the Audio track all the MIDI tracks are unarmed. If I highloight the Midi track then although the audio record light stays on no sound get sent ot it
    Anyone else had this problem?

    You have to shift+select all the tracks you want to record to. This can either be done in the Arrange or in your Mixer (selected channelstrips turn grey). Select your Audiotrack first and then the shift+select the Miditrack, so that it can receive Mididata from your keyboard.

  • Recording vocals and guitar at the same time, using the Alesis IO dock!

    Hi there!
    I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
    I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
    So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
    Hope someone can help :)

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    Hi John,
    I think the only way is to get an iMic...
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

  • FCP Audio and firewire at the same time?

    Hi, I was pondering an idea that made me wonder this. I hope it is not a stupid one but I am sure I get an "E" for effort or a "god bless his little heart".
    I will be moving my mac to a studio to work on a instructional DVD. I will be capturing from one main camera real time via firewire, I have the option of going out of the console via optical for the instrument tracks and vocal. ( whether I can only have one active audio inputed track or two doesn't matter but would like two).
    This audio will be pro quality and I just want to use FCP.
    I am only interested in the video without the camera audio.
    I want to capture the camera video(firewire) and studio(optical) audio at the same time.
    If not it's no big deal I can route audio to the 3.5mm audio mike input on the camera.
    I am running FCP studio and have no budget and a chance to play. I am on a barter project. I was just hoping for a time saver and down the road I would be happy to know my limitations as I may move into the studio and "sync" up.
    I have another camera that I will add later for my Picture in picture effects.

    Hey X thanks for your reply
    Well I talked to my friend at the studio. and we are still saving the audio on digital hard drive in case this doesn't work. ( Which I know is the right way). I only asked the question because I apparently am lazy and want to spend as little time trying to sinc up later. My solution was to be fluid. In the end the project would be available for download tutorials/lessons from his web page, which will be a whole other delivery question as I am working through the third party whose project this belongs. Given my information I am trying to cover a lot of possibles to create something better than he is asking ( A Pro Job )
    I was hoping to cross from "hobbiest" to "entry pro" here. Most I get to play with are relatives videos and stills. I have two completed two paying jobs in which I have purchased the mac and Final Cut Studio.
    This is more of a controlled environment and wanted to utilize as many choices as possible.
    The camera I am using (Panasonic PV-DV951-K) doesn't record to tape properly or doesn't replay what was recorded on tape. My solution was to go directly to FCP via firewire as a live realtime capture.
    I opted for this as having no choice and in the end. Given the amount of lessons that would have to be captured and the equipment I have conjured up I think it is my best solution.
    Again I thank you X and I meant no disrespect as to who is clueless. I am the one asking the questions. I don't always ask questions until I have searched the forum for an answer and appreciate those of you who take the time to answer "patiently".
    Also I am an electronic technician and in a pinch devour troubleshooting to the point of magiverism.
    When this is all over and I am enjoying a pint and reaping what few dollars this creates, I'd like to buy you all a beer. Then I'll plan the next hairbrain project.

  • Razor blade tool not cutting audio and video at the same time

    Hiya,
    When using the razor blade tool in a timeline, my razor only cuts the video track, or one audio track at a time. The audio and video were imported together.
    I would like for the video and two audio tracks to be cut at the same time--so that when I'm cutting I don't have to click three times (VA1A2).
    What needs changed to do this? Thank you!!!!
    A little annoying -- but would be a time saver. Never had this problem before FCS2.
    Thanks again!

    Are the video and audio clips linked? If they're not, the cut will only apply to the track under the blade tool.
    -DH

  • Logic Pro when recording audio and midi takes, the regions sometimes become confused. The midi tracks line up with audio tracks.

    When recording midi and audio tracks simutaneously the midi tracks don't always line up with the software instrument channel. They may show up on the audio track. Sometimes they appear white instead of the normal green. Any suggestions?

    Hey there jlholm,
    It sounds like you are seeing some unexpected behavior when you are working on your project. I would use troubleshooting steps 6-10 from the following article named:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Capter and edit at the same time

    Can I capture and edit at the same time with cs4, Also can i export to dvd or to tape and edit at the same time?
    Sebastian

    No.

  • Play an rtp stream and save at the same time

    Hello
    How cam i play and save at the same time an rtp stream.
    can anyone help me about this.
    Thanks

    Hello
    How cam i play and save at the same time an rtp stream.
    can anyone help me about this.
    Thanks

  • Multiclips and multiple audio tracks playing at the same time

    I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
    I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
    The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
    I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
    I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
    Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
    G5   Mac OS X (10.4.3)   Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

    ...

  • Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

    Hi all, 
    thanks in advance for your advices.
    I have a problem with my notebook (HP pavilion g6 2305 sl).
    The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
    I tried to install again the latest driver audio, but nothing was changed.
    I tried to use another pair of earphones, but nothing.
    I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
    I read a lot of forum on the web but I'm not able to find a solution for my problem.
    (ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

    Right click on speaker icon, lower right screen.
    Choose playback devices.
    Select "speakers and headphones" as your default.
    Disable "communications headphones".

  • Can we use both INSERT and UPDATE at the same time in JDBC Receiver

    Hi All,
    I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
    user send the file which contains both new and old record and I need to save those in MS SQL database.
    If the record exist then use UPDATE otherwise use INSERT.
    I looked on sdn but didn't find any blog which perform both the things at the same time.
    Interface Requirement
    FILE -
    > PI -
    > JDBC(INSERT & UPDATE)
    I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
    Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
    Thanks,

    Hi ,
              If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
    "If the record exist then use UPDATE otherwise use INSERT."
    Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ...  where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows  you proceed with "insert into tablename....." since there are no old records present in database.
      Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database.  A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
    http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
    http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
    [ This part you can ignore, Since its not sure that you will face this situation
        Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
    http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
    http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
    http://www.faqs.org/docs/ppbook/r27479.htm
    http://msdn.microsoft.com/en-US/library/ms187373.aspx
    http://msdn.microsoft.com/en-US/library/ms173763.aspx
    http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
    http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
    http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
        There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
    regards
    Anupam

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • Monitor and capture at the same time?

    Is it possible to view/monitor a video (live from a quickcam) and capture at the same time?
    I looked at the solution here:
    http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html
    And found "Video Capture Utility with Monitoring" sample program. However it only allows capture! There is no live display of video viewing while the capture is happening.

    Actually, the sample program works once I uncheck Audio.
    I do not have any Audio input device, so I guess that is causing the problem.

Maybe you are looking for