Recording Audio and Software Instruments at the same time

Is there anyway to record a live audio track while recording the drum track with the ES-Blah blah blah? i can never remember the number.
Im sure that you have seen this question before, but at least you will get a few good points for answering the question again.
-Frisco

Click record on the MIDI/Inst track.
Shift click record on the audio track.
Hit record

Similar Messages

How can I record a microphone and software instrument at the same time in Garageband 10.0.1? It seems I can record one or the other, but not both at the same time?

I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1. It seems that I can't record the mic input and the software instrument at the same time. I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
Can someone help?
Thanks,
Kurt

Kurt1997 wrote:
I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
you need to "record enable" both tracks:
http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

Playing 2 or 3 or 4 or 5 software instruments at the same time

in older days, if you clicked on 3 programs in the sequencer like track 1,2 and 3 which made them blink on an Ensoniq TS10
you heard all three instruments at the same time which allowed for quite a nice sound. Other companies im sure had this feature. This was great for live playing as you had lots of combinations of SI/programs to experiment with. It seems GB when played live only plays one of the SI at a time. Am i wrong here? wouldnt it be nice if we could hit track one with piano, then double click track 2 with a synth pad, then the same with track 3 with a flute combine their sounds and depending on the RAM & processor speed ( ive got tons ) one could hear live the combination of multiple si and sf2's. this should be on GB 3.1 when i play at home live i should be able to hear the combination of sounds not just one of them

Drag the software instrument(s) into the timeline. Just clicking on a si loop in the browser window is for previewing the si. You can change the length of the loops by grabbing the right edge of the loop and dragging it.
Play around with GB and read the Help files.

Process audio and use midi at the same time?

I would like to use Mainstage to process my vibraphone and acoustic percussion while also using software instruments with a MalletKat and audio playback for backing tracks all at the same time. Is this possible? I have a 17" Mac Book Pro with 4 GB Ram and 2.66 speed.

Rich O'Meara wrote:
I would like to use Mainstage to process my vibraphone and acoustic percussion while also using software instruments with a MalletKat and audio playback for backing tracks all at the same time. Is this possible? I have a 17" Mac Book Pro with 4 GB Ram and 2.66 speed.
Absolutely....
Create audio channels for the "live stuff", Instrument channels for the MIDI stuff, and use Playback for the backing tracks.
HTH
CCT

How do I bounce audio and midi tracks at the same time to burn a CD?

Hi there,
I would like to bounce a song with both audio and midi tracks recorded in it onto a CD.
Despite ensuring that I am doing a realtime bounce (not offline) I am only getting the audio tracks burnt onto the CD - the midi isn't getting bounced to the final output.
This must be a stupid question, if someone would be so kind as to give me an obvious answer I would be most grateful.
Thankin y'all
amata

Hi A,
if you use the instrument (with logic virtual synths) tracks for midi,
it will.
BTW, why don't you do it offline?
It will be so much faster.
Kindly regards,
Jorge

Can Flash play multiple audio and video files at the same time?

Hello,
I would like to create a web-based client/application that
can play multiple a/v files or stream multiple a/v files at same
time. Is this possible with Flash, without the use of RTMP? If yes,
can you please provide an example. Thanks in advance.
Regards,
Nilang

You never edit within a clip. The purpose of opening a clip is to make sync adjustments, audio equalization, color correction, stabilization, things that you might want do overall to the master clip before you edit it. You edit the portion of the clip you want from the browser into a project. There is really very seldom any need to open a clip into the timeline.

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

Recording audio and software tracks simultaneously ?

recording audio and software tracks simultaneously ?
I am recording a software piano instrument track and a vocal audio track in logic Pro X. Problem#1
When the replace"X" button is selected,
when recording audio and a software track simultaneously,
I can hear the previously recorded instrument track that I am recording over.
(very distracting)
When recording a software instrument track alone (without simultaneously recording an audio track)
The software/midi instrument track will record over and erase existing data and I will not hear the previously recorded track. (as it is suppose to do) Problem #2
Both tracks are armed ready to record.
If the software instrument track is not highlighted, it will not record.
The audio track will record regardless of whether it is highlighted or not. Craig C.
Calistro Music

Click record on the MIDI/Inst track.
Shift click record on the audio track.
Hit record

Labview runs CANBus and DNP3 software model at the same time

I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
I proposed two possible ways to conduct communication, bt not sure if it is possible.
1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
The diagram of the communication system is shown in the attachments.
Attachments:
Commnucation system diagram.pdf ‏118 KB

To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
¿Do you see a trend developing here?

HT1349 why some iphone 4s has korean letters at the back and not the same with the most iphones..but the serial and software are all the same..so why there is phone with korean letters on the back it says.. kcc -cmm- apa -a1387

why some iphone 4s has korean letters at the back and not the same with the most iphones..but the serial and software are all the same..so why there is phone with korean letters on the back it says.. kcc -cmm- apa -a1387..i purchased one and really worried about this..is this original or not..but all the software etc are all the same with other iphone..just that korean letter at the back

I bought it in some mall here in our place..im from philippines.. im worried about this coz its different with other iphone at the back.. it says designed by apple in california..then its all korean letters at the bottom it says KCC-CMM-APA-A1387..i checked both serial number from the phone in the box and in the sim card slot and its all match, i checked it also in apple service and support coverage and it says : valid purchase, your product is eligible...and it shows i have 90 days technical support,and my repair and service coverage is active....pls help what model of iphone is this its working and i can sync to itunes,icloud and etc..thats what it says on the back on the image ia

Problem connecting Firewire device and external HD at the same time

Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

Getting Logic master to send to both 1-2 and 3-4 at the same time

I have an native Instruments Audio Kontrol 1 'sound card' that I'm running 2 different sets of M-Audio monitors off of. My question i, can I run the master output to both 1-2 and 3-4 at the same time so I can easily check mixes on both sets of speakers without changing every single tracks output?
Also, is this possible to do in iTunes also? I can find nothing in Logic (or anywhere) that will allow this and I initially thought my device was broken until I simply choose 3-4instead of 1-2.
thanks so much!

Pancenter wrote:
Sampleconstruct wrote:
In Logic you could just setup additional sends of your Audio tracks using the send knobs and send the signal to a Bus. Set the outputs of that Bus to 3-4 and you'll have your signal played through 1-2 as well as 3-4.
Also, if any of the audio tracks used sends (reverb on a bus..etc) those would also have to be sent to the same bus as the audio tracks.
panleft-
How about routing all the outputs that are currently on Output 1-2 to a bus first then:
Option 1: Switching that bus's output between outputs 1-2 and 3-4 (for A/B comparisons)
or
Option 2: Use the Send on that bus's output to another bus, route that second bus's output to 3-4 (so both busses are sending audio to both sets of speakers simultaneously).
As an alternative, the Mackie Big Knob is a great hardware solution for routing a signal to 3 sets of speakers, allowing you to switch among them with simple button presses.
-droo

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Can I run a podcast and an app at the same time?

Can I run a podcast and an app at the same time?

Yes for most. You can run a regular app with an audio podcast. I do not know what could run with a video podcast.

Recording Audio and Software Instruments at the same time

Similar Messages

Maybe you are looking for