Recording audio from "External instrument"

what's an easy way to get get audio from an "External instrument" track to it's own audio track for later editing? I have to use the External instrument because I need to monitor my synth with delay inducing pluggins on the master outputs.
thanks.

i use the external instrument plug-in a lot with my lexicon mx200 (jord you can say hypocrite now) with guitars, vocals, and drums.
Why? An engineer friend once told me: if it sounds right, then it is right.
Like I said, you have to keep in mind that a mastering plug-in on the output bus will introduce delay. And, considering, as you stated, that a compressor would probably achieve the same effect, there's no reason not to use that instead (which may also take care of the delay problems). However, I wouldn't have even applied it on the output bus until it was time to mix and get my sound together (once I have tracked everything else).
jord

Similar Messages

Recording audio from external keyboard

Hello
I have a keyboard hooked up to my computer via USB connection.
I can record the keyboard to 'software instrument' track but can't to 'audio' track.
I have a microphone also USB connection, I can record to 'audio' track, no problem, so Im not sure what's missing
Logic Pro 9
Thanks in advance everyone
TT

I finally understand what you are saying now...so I have to get the audio cable and not suing the current USB that I have...my thinking was if I can do with microphone via USB port, then the USB cord from the keyboard should act the same way, and as you said, by using that I can only get MIDI...OK bottom line I will have to get different cable, get one with line out from keyboard and into the Mac's buil-in audio input.
I'm reading the manual the 'Exploring Logic Pro' chapter 4 about Recording and Comping Audio, this will only work if it's an audio tract and not software instrument track...so that's why I want to be able to record as audio track, so I can have 'audio takes' and 'Take Folders'
My keyboard is Korg SP-280
thanks
Tam

Recording audio from external radio

Is it possible to plug my external radio into the iPad and then do scheduled recordings of radio shows?
I am currently doing this with my iMac and Audio Hijack Pro. I am looking for something similar with the iPad.

There are a number of apps available that can record through the audio input. Whether any of them can be set to record on a schedule, though, I don't know. I haven't found anything that will do that, but I might easily have missed something in the App Store that would do what you want.
Regards.

Recording audio from device on server

I have some really nice audio recording gear hooked up to my computer, and I got a neat idea. I want to turn my PC into a web server and serve a flash application from it that allows a user to record audio from MY hardware (basically record the output of a mic hooked up to the "server") and then download the resulting audio file to his or her computer. Is this possible to do using a single flash application? I'm sure I could send commands to a C application on the "server" that would do the recording, but I'm wondering if there is a more simple solution. Also, monitoring the audio while it is being recorded would be nice.
Thanks

The issue I see with iTalk and similar iPod apps is that the iPod has no line-level input, so you'd have to use one of the earbud/microphone combinations or an external microphone like this one which will be limited as to quality. There are some other options here. But if you want pro quality, and particularly want to tap straight off of a mixing console, a device like the Alesis is going to be necessary, though there may be something less expensive that I can't find.
If a microphone works for you, then iTalk might be fine. There's a freeware version of iTalk, iTalk Lite, you can try, to see if it will do the job. It doesn't have the advanced playback controls and has a limit of 2MB per recording, but it should allow you to test it out. Voxie is another possibility.
Regards.

Recording audio from a Channel Send

I've done this before, but I can't seem to do it again.
I am trying to record audio from one channel (which is using an audio instrument) to another channel (an audio channel) using an audio send. I am not having a problem setting up the send. I am able to hear the audio correctly and independently on both channels. The problem occurs when I try to record the audio, because there is no "record" button on the channel header for me to arm the track. The track is set up as a "record-enabled" track, but in the space where the other tracks have the record button, there is just a empty space on this tracks header. Does anyone know why this is happening? Any help would be greatly appreciated.
Thanks.

Well,
I seem to have found the problem. It appears that "audio tracks" will not allow you to arm them for recording unless there is a possible real audio input device connected to the computer. I plugged in my Snoball mic, allowed Logic to set it up as a device, and the record button magically appeared in the track header.
Hope this helps anyone else who is having a similar issue.

Recording Audio From A Sound Board

I was originally planning on buying a Samson Zoom H2, H4N, or ProTrack Stereo Recorder to begin recording audio at concerts I attend using the house sound board, but began wondering if the iPod Touch had the same capability, perhaps by adding an app of some kind. It would also be useful to record audio from weddings I videotape. I know there are voice recorders such as the Belkin that you can attach, but I was thinking more of connecting the iPod directly, by using a 1/4" to mini cable adapter. Is this possible? If so, what app would enable me to do this?

The issue I see with iTalk and similar iPod apps is that the iPod has no line-level input, so you'd have to use one of the earbud/microphone combinations or an external microphone like this one which will be limited as to quality. There are some other options here. But if you want pro quality, and particularly want to tap straight off of a mixing console, a device like the Alesis is going to be necessary, though there may be something less expensive that I can't find.
If a microphone works for you, then iTalk might be fine. There's a freeware version of iTalk, iTalk Lite, you can try, to see if it will do the job. It doesn't have the advanced playback controls and has a limit of 2MB per recording, but it should allow you to test it out. Voxie is another possibility.
Regards.

Recording Audio from additional sources: Why doesn't the "Audio File" show

Hi, when recording audio from another source and saving: where does logic store the file? Shouldn't it be in the "audio' folder or the set path you set it to>?
For some reason after we record the "Audio File" we recorded is not to be found in the "Audio" folder we created within our project?
clues?

Can you define "from another source". I'll assume for now, you mean, from an external live source, like a vocal, or guitar.
Yes, if you had saved the song using the "Save As Project" command, the audio path to that songs audio folder should have been set. and all audio files recorded into that song would reside in that location.
The only thing that you might want to check, is hit "A" with the song open, and make sure "choose path" is set to "Song Recording Path" and not "Global Recording Path".

Recording audio from a DVD

Does anyone know of a good freeware or shareware program for recording audio from a DVD into any format?
iBook G4 Mac OS X (10.4.3) 80G HD/1.33GB RAM/ Too Much Music

A nice tool for ripping and demuxing the audio part off a DVD is OSex.
You will get ac3 track - convert them with mAC3dec. http://sourceforge.net/projects/mac3dec

Recording audio from a soundboard

Hello fellow iMac'ers, got a brand iMac with OSX Mavericks. I'm trying to set it up to record sound from a Peavey XR1212. I'm a PC guy, so I'm used to using Audacity to do the same procedure, so I downloaded it and tried to get it to work. The soundboard has an "mp3 in" line as well as an RCA out jack. The iMac does not have a mic in line, only a headphone port. I called Apple Support and the representative informed me that the headphone port on the Mac is smart enough to determine whether I would be using it for headphones of a mic in line, so I should put the mic in line there. So my set up was running an RCA jack (red and white connected to soundboard) with a headphone jack on the other end into the headphone port on the Mac. When I began recording on the through Audacity, the program did not show me the soundboard or the RCA jack as one of the available options to choose to record sound from, it defaulted to the internal mic on the Mac as the only option.
I did not try going from the "mp3 in" line from the soundboard (which btw is a headphone port as well) to the headphone port on the back of the Mac. I use an auxiliary cord to play music from the Mac through the soundboard with these headphone ports, but it just didn't seem obvious to me that this set up could be used for recording.
While I was downloading Audacity, the Mac was updating garageband, which I have little to no familiarity with. I have done some research and found out that I could potentially use this to record from my soundboard as well. So finally here is my questions:
1) The back of the iMac has 4 USB ports, 1 FireWire port, 1 headphone port and 1 ethernet port. Since there is no "mic-in" port, what port can I use to record audio from the soundboard in audacity or garageband?
2) If I go from the soundboard with an RCA into the headphone port on the Mac, can I use garageband to record?

Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

Recording Audio from Video Tape

Hi! I want to record audio from a video tape and put the audio into my imovie. I have done this funtion before, but I can't seem to remember how! I am able to play the movie (the video tape) in a VCR which then goes through my "bridge" (DV Converter) and into the computer. When I open imovie and import the video and audio into a "clip", I can't seem to play the clip and record the "audio" in the audio section. Again, I have done this before, I just don't remember how. Can anyone help??

Hi Kim - welcome to the forum!
You would simply extract the audio from the clip - select it, then go Advanced>Extract Audio (Command J). This will place the audio in the top audio track. Then you can delete the clip, and move the extracted audio to wherever you want it.
Does that help?

Any Freeware suggestions to recording audio from a DVD?

If I am playing a DVD in my iBook, I want to be able to record audio from that DVD. Any suggestions?

The free program a52decx takes a DVD and outputs the audio in an .aif file. Search google to find it.
12 iBook G4 1Ghz Mac OS X (10.4.4) Other machine: Mandriva Linux i586

Where did the "record audio from speakerphone" option go in Connect 8??

When I went to start a recording today in Connect 8, I noticed that the "record audio from speakerphone" option is missing on the pop-up where you enter your recording name and description. Where did this option go? This is how we record all of our meetings where we do not have integrated audio (usually due to using an operator assisted line.) I did double-check my flash settings and made sure the meeting had access to the microphone.

Connect 8 records all audio from the Phone if that was used, or VOIP or via Universal Voice. It picks up all audio in the meeting.
If you have associated a universal voice audio profile with the meeting, choose Audio > Join Audio Conference.
Choose Meeting > Record Meeting.
In the Record Meeting dialog box, enter a name and summary for the meeting recording.
A recording icon (red circle) appears in the menu bar to indicate that the meeting is being recorded.

Record audio from .exe file

Hi we had created an entire project of 2.5 hours of around 140 slides using Adobe Captivate 6. We had put the slide notes as text and published an .exe file and shared the same with the client.
However, now we have lost the source captivate .cptx file and have to redo the project from scratch. We have the powerpoint presentation for each slide so putting the objects as per the .exe is not an issue.
We figured the easiest way to have the audio is to record directly from the .exe and then put the audio files in captivate, rather than putting slide notes and repeating the entire process.
Is there a way to directly record audio from the .exe file? This will reduce our effort with respect to the pronunciation of words.

Double-click your .exe file and let it run, do not close. If you're on Windows 7 go to
C:\Users\your user name\AppData\Local\Temp\
and look for a folder like CPE7770.tmp. You can use the date and time stamp to locate this folder.
Your swf file will be there.
If on another Windows OS, the path should be similar.
You can also use software like Audacity or Audition to record audio from your computer. Set up will depend on your system config.
Cheers,
Seth

Problem recording audio from sampler...

Problem recording audio from sampler (MPC 1000) to Logic using midi trigger thru Lexicon Omega box.
When I hit the record button in Logic, it triggers my mpc to start playing. Logic then picks up the incoming audio signal on the appropriate track and starts recording the audio... PROBLEM- Logic appears to keep restarting the incoming audio, repeating the first 1/4 of the first 1Bar. So every time I hear the metronome tempo counter as it records, the incoming audio replays from the beginning and this is what gets recorded. On the contrary when I'm controlling the sampler via midi and just hit the play button in Logic, the audio signal comes threw and plays the full 4 bars of the audio that I want recorded.
Any idea on how I can fix this? It seems like it has to do with my metronome counter or midi time code?
Thanks to all that help!

Thanks, good suggestion but these are music instruction dvds that aren't copyrighted.
cheers
Eric

X-FI record audio from internal dvd video prob

I have an X-FI Platinum.
When I try to record audio from the internal dvd dri've when playing a video, the recording skips and changes speed, anyone else noticed thi ?. It's the same whether trying to record from the audio console or another application.
This is in audio creation mode
thanks
Eric

Go to this thread and follow the instructions to get the drivers/install disc for your pci soundcard:
http://forums.creative.com/creativel...hread.id=25677
Good luck!?

Recording audio from "External instrument"

Similar Messages

Maybe you are looking for