Recording audio with both sound card and mic

how i can develop a program to record audio file from mic and sound card at the same time??
Muhammad Shoaib Software Engineer Shamim & Co. (Pepsi Cola Bottlers) Multan, Pakistan +923136140304

Here Recording Audio from a Microphone
https://msdn.microsoft.com/en-us/library/ff827802.aspx
chanmm
chanmm

Similar Messages

Front audio with PCI sound card?

Well, the front audio on my Antec P160W worked perfectly with the integrated sound, but I changed to my SoundBlaster Audigy Player because of the HORRIBLE audio quality. Now the front audio ports don't work. What do I need to do to make it work again? I'm not going back to the integrated.
At first I thought that I had to put the connectors for the front audio on the sound card, but the manual of it doesn't show any of those features.

I was wondering that myself. The only thing I think you could possibly do is have both the onboard and the pci sound card enabled and use the onboard sound just for the headphones. I have no tried this yet as I do have the cables connected to the mobo but I have the onboard sound disabled.

Improving SNR on Mic recording to built-in sound-card's mic jack

Hi all,
I've been doing my recordings from the built-in mic jack in my laptop (sound card is the basic Intel HDA). From the 'headphones' jack of my Korg, this is not a problem, as the volume level is plenty loud enough for my input volume in alsamixer to be set to about 13% or something like that, which basically means minimal/negligable noise.
However, I just purchased a Shure SM57 mic for vocal/guitar recordings. It's an XLR mic, so I use an XLR cable, an Audio-Technica transformer to convert it to quarter-inch, and then a quarter-inch to headphone-jack converter.
My problem is that the volume levels, as you may imagine, are really low on such a setup, such that I have to turn alsamixer input volume up near to 100%, AND activate some mic boost as well. This means that I get heaps of noise, which is obviously non-ideal.
How can I improve the SNR ratio? Some other sort of converting transformers? Do I need a pre-amp? Are there good noise-removal plugins in Ardour that you could recommend?

If your profile is correct you are running Lion so you don't have a DVD you use the recovery partition.
As long as you do an overwrite install and not a clean install (were you wipe the HD before installing) your files will remain only the system files will be written.
Having said that even though it is safe to do whenever you're doing something like this you should have a good current working backup just in case.
See OS X: About OS X Recovery - Support - Apple for information about using the recovert partition.

Recording audio directly form sound card

Hello,
I am new to flex but my first app is a little bit more pro than you would expect form a rookie. I would like to record sound that is currently played on the local computer. I saw some codes that use the microphone, but this is undesired. The client machine may not have a microphone hardware or may play the sound on headphones. I think this must be possible but may be not a common task so that's why I can't find the solution? Can any one help?
PS: I am sorry if this is the wrong forum to post - if it is, please direct me to a proper forum.

Here Recording Audio from a Microphone
https://msdn.microsoft.com/en-us/library/ff827802.aspx
chanmm
chanmm

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

Audio sounds damaged. I have tried with both built in and external speakers.

Audio sounds damaged. I have tried with both built in and external speakers. I think its a problem with a driver or something.

Try a PRAM reset:
http://support.apple.com/kb/HT1379
Ciao.

[SOLVED] Audio dropouts with USB sound card

Hi! Recently I bought an external USB sound card (Music Fidelity V-DAC). If I plug in the USB cable the sound device is recognized by Phonon in KDE4 (kdemod).
If I play an audio file in Amarok (or VLC) the audio is indeed redirected to the USB sound card and played correctly. However, if I use my USB mouse, or USB keyboard dropouts are occurring in the audio signal. It seems that other USB devices are interfering with my USB sound card.
More details:
Arch Linux with kernel 2.6.33 and kdemod 4. Phonon backend is Xine. I also tried gstreamer, but this crashes Amarok/
$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebfc000 irq 29
1 [default ]: USB-Audio - USB Audio DAC
Burr-Brown from TI USB Audio DAC at usb-0000:00:1d.1-1, full s
$ dmesg | grep Audio
input: Burr-Brown from TI USB Audio DAC as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/input/input12
generic-usb 0003:08BB:2706.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-0000:00:1d.1-1/input2
input: Burr-Brown from TI USB Audio DAC as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/input/input15
generic-usb 0003:08BB:2706.0005: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-0000:00:1d.1-1/input2
I also tried an Ubuntu (9.10) live CD. Using ALSA or Pulseaudio a clean audio signal without dropouts is produced.
I wonder if someone can help me with this problem, or point me to more information. Thanks!
Last edited by boomerang (2010-04-25 17:47:15)

Thanks for your suggestion. I added the following line to my /etc/modprobe.d/modprobe.conf file:
options snd-usb-audio enable_msi=1
After a reboot the problem still persists. I also tried another suggestion from this forum:
options snd-usb-audio nrpacks=1
This doesn't work either. I tried to change settings in /etc/security/limits.conf, which looks like this:
@audio - rtprio 99
@audio - nice -10
@audio - memlock 250000
The USB sound card doesn't share a IRQ with another USB devices, as can be seen here:
$cat /proc/interrupts
CPU0 CPU1
0: 124157 0 IO-APIC-edge timer
1: 2102 0 IO-APIC-edge i8042
8: 182 0 IO-APIC-edge rtc0
9: 523 0 IO-APIC-fasteoi acpi
12: 3780 0 IO-APIC-edge i8042
14: 15944 0 IO-APIC-edge ata_piix
15: 5177 0 IO-APIC-edge ata_piix
16: 29001 0 IO-APIC-fasteoi uhci_hcd:usb5, firewire_ohci, nvidia
17: 0 0 IO-APIC-fasteoi mmc0
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 44788 0 IO-APIC-fasteoi uhci_hcd:usb3
23: 387 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
28: 1608 0 PCI-MSI-edge eth0
29: 932 0 PCI-MSI-edge hda_intel
30: 0 0 PCI-MSI-edge iwl3945
NMI: 0 0 Non-maskable interrupts
LOC: 22401 65060 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 89856 104215 Rescheduling interrupts
CAL: 1409 563 Function call interrupts
TLB: 1733 2536 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 2 2 Machine check polls
ERR: 0
MIS: 0
$ lsusb
Bus 003 Device 002: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
[b]Bus 003 Device 003: ID 08bb:2706 Texas Instruments Japan [/b]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 07ab:fc88 Freecom Technologies
Bus 001 Device 006: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c317 Logitech, Inc. Wave Corded Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Any other suggestions?
I even tried to disable the internal sound card by blacklisting it:
blacklist snd-hda-intel
.. but still no success
Last edited by boomerang (2010-04-19 20:04:33)

Will FCP X and QT will output audio thru any sound card that the Mac recognizes?

I watch FCP X video on my Mac Pro video monitor.
I want to output the audio thru a sound card to my audio monitor controller. My new digital audio monitor controller connects USB to the Mac, and USB is not an output option with FCP X. So, I need another audio path.
I have previously used a Pro Tools HD Native card for sending FCP X audio out, and this works fine.
I assume that any other sound card that works in the Mac (i.e., compatible and selectible in Mac Pro Sound Preferences) would work with FCP X, but I am just checking to be sure this is right before I buy something.
I am aware of potential sync issues, so I would use only a low latency sound card. The Pro Tools card, for instance, had very low latency and worked fine.

OK, forget it.
I can just use the Mac Pro optical digital out. Doh.
Some days the brain just won't lock into gear.

M-Audio Delta 192 Sound Card With Adobe Audition

I have a m-audio sound card and a mackie pro fx8 mixer, I am running windows7 64-bit. I was wondering how I need to set my preferences in Adobe Audition? When hitting record I am not recording my audio

Make sure that you have the M-Audio ASIO drivers installed. Then under Audition's Preferences/Audio Hardware select ASIO for Device Class and M-Audio ASIO for Device. Under Audio Channel Mapping select appropriate M-Audio inputs and outputs. If you are trying to record in the Mutitrack window make sure you select the correct input for each track. It will probably say Default Stereo Input but you can click on that and select any of the inputs that are available from the Delta 192.

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

What version of iPhoto?
Can you access the images with Image Capture (in your Applications Folder) ?

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

ok thankx! but i must to know the output impendatie of my audio card= intel high definition audio? can somebody help me
this is my mac book
http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-alumi num-13-late-2008-unibody-specs.html

Satellite A300 and Win7 - Strange problem with speakers\sound card

Hello everyone,
I am working on a - A300-1MO with win 7 ultimate 32 bit
In the last few days (since I have installed the Bluetooth driver but I dont think it matters), the sound card, and therefore the laptop speakers, switch from being mute to being active, sometimes in high volume.
It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
I tried muting the sound card from the windows mixer and from the sound card application, it's no use.
I will appreciate any help.
Thanks a bunch
Roi.

Hi roibs,
> It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
Maybe you should leave your computer at home and not play with it in your class ;)
Anyway, I would recommend disabling all Windows sounds in control panel. That means no sounds will be played while you navigate through the Internet or use the Explorer.
Check this!!!

The only time the sound/speaker and mic don't work is when I answer or make a call

The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty

Sound Blaster Sound Cards and Gigaworks S750

I recently purchased a Sound Blaster Zx sound card and found that it only supports up to 5.1 speaker configurations. That means I don't have sound from my side speakers in my Gigaworks S750 7.1 system. Needless to say I am very disappointed with Creative Labs engineers wondering why 7.1 support has been dropped from their very own speaker systems. I am posting hoping some more knowledgeable forum members can offer a better solution to my dilemma.
I could go back to my X-Fi Extreme Music card which has all of the 3.5 mm minijack speaker connectors but I would rather not do this as support for this card has been dropped and I am doubtful that there will be many more driver and/or software updates available. I would also rather not buy a new speaker system b/c I am happy with the Gigaworks and don't really want to replace it.
I looked going back to an older Titanium HD soundcard but it only has RCA connectors on the back of the soundcard and the Gigaworks connectors are 3.5 mm minijacks. The Gigaworks has no optical or HDMI connectors anywhere. I wonder....can I connect the 3.5 mm jacks from the Gigaworks to the RCA or optical ports on the ZX or Titanium HD with an adapter or converter? Does Creative sell new cables or adaptors, or any special audio shop for that matter, that would make the connections work?
Can anyone help please?
Thanks!

As I said, that upmix is only a workaround, you still have just 5.1 discrete channels, just that the rear and sidespeakers emit the same sound.
I don't have any experience with Asus or Auzentech. Both have their issues as well but they are both very good and only the very best creative cards (X-Fi Titanium HD, ZxR and perhaps X-Fi Elite Pro) can compete.
On the other side Asus has most of their cards in production for half a decade without alteration and doesn't update their drivers very often as well. Their don't be as many issues as with creative cards, but you will find people having problems as well, it's not like they work flawlessly for everyone.
Same for Auzentech, only they didn't produce as highend cards as Asus and some Creatives (Titanium HD and ZxR only) plus while their dirver support seems to be good, their other support is nonexistant, especially since they seem to have stopped producing soundcards. Additionaly I have heard of the X-Fi Forte mysteriously dying on many people after some years.
The differences aren't great, though, and in my opinion you won't find a soundcard combining everything to perfection. The ZxR nearly does, only lacking 7.1 output.
The Asus Xonar STX is very similar, but can only ouput analoge stereo, while the PCI-based ST can output the very best analoge 7.1 available with a additional daughtercard (but who wants a PCI card nowadays?).
The best 7.1 cards from Asus, D2 and D2X, lack a Headphone-Amp, while the Xonar Xense and Phoebus, being nearly identical to each other, have one but use a slightly lesser DAC for all channels apart from Stereo, similar to the Auzentech X-Fi Forte and Bravura.
The D1 and DX finally are only slightly better than the X-Fi Music and Titanium, because they use a slightly better DAC for Stereo, which is used on Audigy 4 Pro and X-Fi Elite Pro for all channels and for stereo on the soundblaster Z and Zx.
Everything below (Xonar DG(X) and DS(X)) ist far inferior, though the DG(X) sports a cheap headphone-amp even the D2X lacks.
So, if you only want 7.1 as good as possible, the Xonar D2X is the best solution, followed by the D2, Auzentech X-Fi Prelude and Creative X-Fi Elite Pro.
But, if you want to drive very good headphones, too, the Xonar Xense, Phoebus and Auzentech X-Fi Forte will be the better solution.
None of them will be as good as the ZxR, if you can live with discrete 5.1 only.
The minijack cables aren't an option. Just when you connect your Gigaworks to any Asus, Auzentech, Creative X-Fi Titanium card or most onboard codecs you have to use 4 stereo minijack cables, while for any Creative 6.1/7.1 card from Audigy 2 to X-Fi PCI-series you have to use a special 4 stereo to 3 4-pin minijack cable, which probably came with your gigawarks set.
If you want to use any "normal" sound card you don't need any special cable, it's just 4x any normal stereo minijack cable.

ALSA is not detecting my M-Audio Delta 1010 sound card (x86-64)

Hi
I've been searching Arch forums and googling for my problem but I can't find a suitable answer.
I installed my M-Audio Delta 1010 sound card on this PC but ALSA doesn't get it to work.
Chipset envy24 / ice1712
On dmesg I find:
$ dmesg | grep -i ice1712
[ 8.135832] snd_ice1712: probe of 0000:05:06.0 failed with error -5
However, it is listed on lsmod:
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 24529 4
snd_ice1712 59590 0
snd_cs8427 6970 1 snd_ice1712
snd_i2c 4107 2 snd_ice1712,snd_cs8427
snd_ice17xx_ak4xxx 2437 1 snd_ice1712
snd_ak4xxx_adda 8070 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_hda_codec_realtek 61420 1
snd_ac97_codec 113344 1 snd_ice1712
snd_mpu401_uart 5980 1 snd_ice1712
snd_hda_intel 26181 5
snd_hda_codec 98034 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_rawmidi 18800 1 snd_mpu401_uart
snd_seq_device 5269 1 snd_rawmidi
snd_pcm 75735 5 snd_ice1712,snd_ac97_codec,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7218 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60189 25 snd_ice1712,snd_hda_codec_realtek,snd_ac97_codec,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_i2c,snd_pcm,snd_rawmidi,snd_hda_codec,snd_ak4xxx_adda,snd_hda_intel,snd_mpu401_uart,snd_seq_device,snd_cs8427
I followed some instruction and created a alsa-base.conf file with:
$ cat /etc/modprobe.d/alsa-base.conf
options snd slots=snd_ice1712,snd_hda_intel
options snd_ice1712 index=0
options snd_hda_intel index=1
aplay -l returns:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: SB [HDA ATI SB], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Seems card 0 is reserved for the m-audio card but is not being detected by ALSA
envy24control also exits with:
$ envy24control
No ICE1712 cards found
Finally, my /dev/snd
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Dec 7 20:25 by-path
crw-rw----+ 1 root audio 116, 7 Dec 7 20:25 controlC1
crw-rw----+ 1 root audio 116, 16 Dec 7 20:25 controlC2
crw-rw----+ 1 root audio 116, 6 Dec 7 20:25 hwC1D0
crw-rw----+ 1 root audio 116, 15 Dec 7 20:25 hwC2D0
crw-rw----+ 1 root audio 116, 14 Dec 7 20:25 hwC2D1
crw-rw----+ 1 root audio 116, 13 Dec 7 20:25 hwC2D2
crw-rw----+ 1 root audio 116, 12 Dec 7 20:25 hwC2D3
crw-rw----+ 1 root audio 116, 5 Dec 7 20:26 pcmC1D0c
crw-rw----+ 1 root audio 116, 4 Dec 7 20:26 pcmC1D0p
crw-rw----+ 1 root audio 116, 3 Dec 7 20:26 pcmC1D1p
crw-rw----+ 1 root audio 116, 2 Dec 7 20:25 pcmC1D2c
crw-rw----+ 1 root audio 116, 11 Dec 7 20:27 pcmC2D3p
crw-rw----+ 1 root audio 116, 10 Dec 7 20:26 pcmC2D7p
crw-rw----+ 1 root audio 116, 9 Dec 7 20:26 pcmC2D8p
crw-rw----+ 1 root audio 116, 8 Dec 7 20:26 pcmC2D9p
crw-rw---- 1 root audio 116, 1 Dec 7 20:25 seq
crw-rw----+ 1 root audio 116, 33 Dec 7 20:25 timer
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Dec 7 20:25 by-path
crw-rw----+ 1 root audio 116, 7 Dec 7 20:25 controlC1
crw-rw----+ 1 root audio 116, 16 Dec 7 20:25 controlC2
crw-rw----+ 1 root audio 116, 6 Dec 7 20:25 hwC1D0
crw-rw----+ 1 root audio 116, 15 Dec 7 20:25 hwC2D0
crw-rw----+ 1 root audio 116, 14 Dec 7 20:25 hwC2D1
crw-rw----+ 1 root audio 116, 13 Dec 7 20:25 hwC2D2
crw-rw----+ 1 root audio 116, 12 Dec 7 20:25 hwC2D3
crw-rw----+ 1 root audio 116, 5 Dec 7 20:26 pcmC1D0c
crw-rw----+ 1 root audio 116, 4 Dec 7 20:26 pcmC1D0p
crw-rw----+ 1 root audio 116, 3 Dec 7 20:26 pcmC1D1p
crw-rw----+ 1 root audio 116, 2 Dec 7 20:25 pcmC1D2c
crw-rw----+ 1 root audio 116, 11 Dec 7 20:27 pcmC2D3p
crw-rw----+ 1 root audio 116, 10 Dec 7 20:26 pcmC2D7p
crw-rw----+ 1 root audio 116, 9 Dec 7 20:26 pcmC2D8p
crw-rw----+ 1 root audio 116, 8 Dec 7 20:26 pcmC2D9p
crw-rw---- 1 root audio 116, 1 Dec 7 20:25 seq
crw-rw----+ 1 root audio 116, 33 Dec 7 20:25 timer
controlC0 and pcmC0 is not present!
So, what might be causing the probe error -5?
I really need to get this card working! :S
I have Arch up to date!
Hardware specs:
CPU: AMD FX6100
Board: Gigabyte (can't recall the model) with NVidia chipset
Thank you,

I have an m-audio delta 1010lt as well, it's a great card but it sits in my closet now because I "upgraded" to a motherboard that doesn't have legacy PCI slots. However, I'm pretty sure I remember the card working for me and being "plug and play" under arch with kernel 3.3 or newer. So some things I would consider:
Try checking IRQs, make sure nothing is overlapping.
Try using the LTS kernel, to see if it is kernel related, since ice1712 module should ship with almost any kernel => 2.6.26.
How many watts is the power supply? Sometimes insufficient wattage can result in drivers failing to load.
What other sound cards do you have installed? Have you tried blacklisting all of the other cards in your system using alsa-base.conf? This is a bit extreme, but might be a useful troubleshooting measure, as some people have had issues in the past with alsa indexing mutiple cards to the same slot number

Recording audio with both sound card and mic

Similar Messages

Maybe you are looking for