Recording back to tape

I was just wondering if someone can point me to some instructions on how to write a previously "captured" MiniDV tape back to a MiniDV tape. I imported them all into iMovie '08, as that was where I was doing my editing. I made the mistake of taping over the original MiniDV tape. I would now like to re-write all of my "clips" back to a MiniDV tape so I have a backu. All of the clips are timestamped; however, when I write them back to tape using the "print to tape" feature of FinalCutExpress 4, I lose all of the dates. Any help would be greatly appreciated.

Are you sure you lose the dates ? I know for sure that you lose the original timecode (each recording starts from 0, whatever is the original timecode of the clip), but I thought date and time were preserved even if not visible in FCE. Never checked dates myself though.
Have you tried with iMovie ? but probably going back to iMovie from FCE for this purpose is no longer an option for you.
Piero

Similar Messages

Problems recording back to tape from FCE

I can't figure this out. For some reason when I go to record my video back to tape, either throught print to video or directly recording off the timeline, the video breaks up, gets digitized, and sometimes the sound freezes.
My set up is a 15" iMac running FCE HD 3.0 with two daisy-chained external hard drives (one for video and one for music). I have a firewire connection to a Panasonic gs-500.
Everything is rendered, the audio is mixed down and I have even tried shutting everything down and then restarting fresh with camcorder on and plugged in.
Any ideas?

Hi(Bonjour)!
With my iMac G4 1 Go ram, I had this kind of problem, ruining my print to video operation.
So, I develop a simple"protocol" to avoid this:
Do a cold start of your mac, turn on your camcorder,plug it. Start FCE, open just one project, and just the sequence to be exported, select all clips in timeline, render it, do an audio mixdown and... (here's the magic) scroll the playhead from beginning to the end of the sequence, with some playing .(it's seem that this process load the cache memory, at least in my own experience)
This procedure always works for me...
If there is a song bought on iTune Music Store, you can't use this track.
Try a test version with just one minute of movie. (set in and out point in timeline and do the print to tape operation).
Does your hard drives are fragmented or full at more than 80% level?
As said earlier, Firewire ports on G4 iMac are connected together and the handling of two HDs plus a camcorder may drive you into problems.
Try a new project with just one drive, or simply the internal one.
Michel Boissonneault

HT3775 This info is not helping. I am using VC500MAC digital video conversion system to record old VHS tapes to computer. The file is .mov, but quicktime is not playing it back. Help, please.

This info is not helping. I am using VC500MAC digital video conversion system to record old VHS tapes to computer. The file is .mov, but quicktime is not playing it back. Help, please.

Sorry for this question. Can you use this device with Vlc or QuickTime? Does skype support it? Is this device supported only by its own software?
I need a device that can work with my own software. My software can work only with a QuickTime supported device.
Thanks if you will reply to me.

How do I duplicate my original (uncompressed) footage back onto tape?

Hi
If anyone can answer this I will be really, really grateful. I've posted on Canon HV30 user forum and also on Creative Cow, but no one on those forums seems to know the answer.
Question is how do I make duplicate copies of my original mini dv tapes?
I am using my cannon hv30 as a deck. I have an IMac 24" running OSX 10.5.4 and Final Cut Pro 6.0.4.
I've managed to import footage from my canon HV 30 using digital audio settings
On HV30 VTR Mod
Playout Set-up 1
Playback STD A
FCP
Audio Video Settings
Summary tab
Se1 Pres HDV 1080i50
Capt pres HDV
Device Control HDV firewire basic
ignore video playback
A/V Devices Tab
Playback output set to none
The Different output for edit to tape/print to video box is checked
Video HDV (1440x1880_ 50i
These settings are fine for capuring video but I can't get final cut pro to export back to tape on my canon.
Error message is that the audio/video settings aren't compatible with the footage I'm trying to export. Since this was the original footage I captured using these settings in the first place, not sure why not?
I also have a number of .mov files on my lacie hard drive which I need to put on tape for a friend, but I get the same error message as mentioned above. These were originally imported via I.Movie. Is it the same problem? Or is it a separate issue?

What are your Sequence Settings?
If you converted to Apple Intermediate Codec to edit, the procedure is as follows:
1 Make sure your HDV camcorder is properly connected to your computer and turned on
before you open Final Cut Pro.
2 Insert a DV tape into the HDV camcorder.
3 Click anywhere in the Timeline or Canvas to make it the active window.
4 Choose File > Print to Video (or press Control-M).
The Print to Video dialog appears.
5 If you want Final Cut Pro to start recording automatically, select the Automatically
Start Recording checkbox.
6 Select any Leader or Trailer elements you want to include on your tape, as well as start,
end, and looping options. A progress bar shows the progress of encoding from the Apple Intermediate Codec back to MPEG-2 HDV and gives you a time estimate for when the encoding process will finish. A dialog appears instructing you to press the record button on the camcorder.
7 Press the record button on your camcorder, then click OK. If you selected the Automatically Start Recording option, the camcorder automatically begins recording your program to tape. The camcorder stops after the program is recorded to tape.
More info here: FCP menu bar > Help > About HD and Broadcast Formats. (where the above is copy/pasted from)

Please help. black screen when copying back to tape

I would be very grateful of any help. I am trying to copy a movie back to tape however when i do so it results in the recording on the tape being completly black. it has gone through the process but just left a black screen.
very desperate.
Thanks

... and it did work before...? not all European camcorders allow a DV-IN...
cable checked?
finally: iM handle both video standards, even allows to import PAL footage into a NTSC project.. but cameras are 'hardwired' to one standard.. make sure, your project has same standard as camera.. (besides: Apple lingo is a little 'cryptical': '25 frames per second' = PAL, '30fps' = NTSC)
it could have happen, that you incidently created a NTSC project with your PAL footage. and now, it is impossible to playout THAT into/onto (english??) tape ...

Print back to tape FCP & Z1...how?

I need to print back to tape from my edited footage using Final Cut Pro 5.0.4 and my Sony Z1...cant work out how to do it can anyone tell me there workflow to do this?
Should the camera be in VCR mode??? and how do you record?
Thanks...

I recently tried this (with Sony Z1) and it wouldn't work - until I trashed my preferences:
FCP gets it’s knickers in a twist from time to time and if you trash your preferences it will often sort things out (with no harm done to your project etc etc) . . .
Download FCP Rescue :
http://fcprescue.andersholck.com/
Once it’s downloaded, hit Backup first, then hit Trash. If the Trash does no good, hit Restore and everything's as it was. (Easy-Peasy)
FCP Rescue is freeware but there’s provision to make a donation if you wish – (it’s well worth it)
If you need reassurance about trashing your prefs, go to this Apple page:
http://docs.info.apple.com/article.html?artnum=302337
Or this Ken Stone page:
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
Good luck
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Saving HD Project Back to Tape

I purchased a Canon HV20 a few weeks back and have had no troubles importing the videos to my iMac. Initially I wanted to keep all of the vids on the computer but when I saw that a 23 minute video is taking up 17 GB I decided saving to the hard drive was a baaaaaaaddd idea.
So now I'm editing my vids and trying to save them back to tape, however it's telling me that the video needs to be re-encoded first. Not only that but it's taking ridiculously long to re-encode (and I'm on a Dual Core Intel). I've read on the support pages that this is normal for HDV footage, but why?
Am I also going to lose quality with this re-encoding? The question was asked before but wasn't fully answered. If I'm going to lose quality with the re-encode when saving back to tape then I'm not going to use iMovie HD at all...
Thanks for any help and/or suggestions.
20" Intel iMac & Apple TV Mac OS X (10.4.9)

There are lossy and lossless compression schemes. Lossless compressions don't compress all that much, but you are assured that you never loose any quality during editing or conversions. Lossy algorithms loose a little bit of quality every time you have to re-encode. Sort of like a copy machine: if you just make a single copy, it looks almost as good as the original. But if you take the copy and make another copy, and repeat that process, it gets a little worse every time. Most video compression algorithms in use are lossy.
Mini-DV based HD camcorders record in MPEG-2. MPEG-2 is a little challenging to edit directly, so most video editing applications first convert it into a format that is better suited for editing. That format needs a lot more space. Your 23 minute clip is probably about 5 GB in MPEG-2 format on the tape, but 17 GB after decoding for editing. To save it back to tape, it has to be converted back to MPEG-2 format. MPEG-2 encoding is a pretty slow process. And yes, you will loose some quality along the way.

Capturing HD recorded from DV tape

I've been given a DV tape that has been filmed using a Sony Z1E camera in HD. When trying to capture the footage in FCPHD 5.1.2, there's no setting that will allow it.
Any suggestions?

to capture at the native resolution recorded on the tape, you need to use a compatible HDV deck or camera to play it back ... make sure you set the FCP > Easy Setup to the same as the source format as recorded
alternatively, if you don't want to work in HD, depending on the playback device, you may be able to set it to downconvert the source to plain vanilla DV, in which case you should set the FCP > Easy Setup to the approriate DV format and capture as such.

Write back to tape

I have several video files that I captured from a MiniDV camcorder using iMovie. I know have lost the tape and would like to write these files back to a MiniDV tape. Can someone outline step by step what I do to achieve this in FinalCut Express (or iMovie if it would be easier). If possible, I would like to maintain the date after writing back to tape (e.g. so I can watch on the camcorder and the date is proper). All of the files are saved as "[date of recording].dv" inside the "iMovie Events" folder. Any help would be GREAT!!!

Not a big deal regarding the date. I anticipated that it would be lost. How do I go about writing back to tape (e.g. is there a step by step guide somewhere that I haven't been able to find). I keep getting the following error:
Could not find an HDV camera or deck.
Please connect an HDV camera or deck to your Macintosh and put in "play" mode.
I am not trying to write back HDV video, nor is the video that has been captured HDV. (all shot on a cheap Sony DCR-HC28 - in both regular and Widescreen)
Thanks for the help!

Sequence Back to Tape (Edit to Tape)

Following along with the Apple Training FCP book, I tried Edit to Tape. I'm recording back to MiniDV on a little Canon ZR60. The footage that came with the training is some HD Seaworld stuff. Edit to tape seemed to work, and FCP started the camera recording, but all I got on the camera's LCD (both during recording and when attempting playback) was a blank screen. Is it because that footage was HD, and if I was backing up a sequence of SD footage it would have worked?

Edit to Tape requires certain things. It requires deck control to a deck that can handle assemble and/or insert editing. It also requires that the format on the deck match the sequence being output.
It sounds as if you were trying to send HD material through DV. Try dropping your HD sequence into a DV sequence, rendering and go again.
If it still doesn't work, then it's possible your deck doesn't support Edit to Tape. However, Print to Video should still work.
Andy

Recording Audio through Tape Inputs in Logic

Hi
I have a Mackie Onyx firewire desk. Is there a way i can record from the tape inputs on my desk in to logic. I have a level in on the desk but cant find how to get logic to receive this signal? Can anyone help
Cheers
Jonny

Hi Jonny,
The tape inputs on your desk are "Monitoring only" meaning they only play back when you select "Tape" in the control room/headphone monitor section.The best way is to bring in what you have plugged into the"tape inputs" on two channels of the board itself,like channels 15-16.
Then you can record directly into Logic,if you have the FireWire card installed.
Cheers

Outputting 720p30 back to tape

Hi,
I have FCP 5.0 on a 2.5 GHz G5, operating OSX 10.3.9
I can capture my 720p30 footage that was shot on a JVC HD101 through my JVC HD50 deck fine. On the timeline I need to render before i can view... can someone help on this? (all sequence/capture presets are the same)
I can still cut though but when it comes to spitting it back to tape, back to 720p30 HDV, I can't. I am going through the print to tape function, the computer takes control of my deck and starts recording but when i review there is no image on the tape....?
Any help appreciated!
banyak

how can I import my imovie 09 file to be recordable to tape without loosing quality?

Please will like to get my deleted recording back from quick

Please I will like to get my deleted recording back from quick voice app

Was it backed up ? If it was - restore from backup (of course, everything else will be restored too).
If it wasn't - you have no way to get it.

Copying iMovie back to tape: "your firewire camera is not powered on"

I'm trying to follow iMovie 6 instructions for copying a movie back to tape.
I connected my camcorder to the computer with the firewire cable, and it shows up in the Share-->Video Camera menu as an attached device. (It's a Canon Elura 100, btw.)
So all seems well until I start the procedure, and then I get a "Cannot Export to Camera" error message that says "your firewire camera is not powered on or is not available."
My ever so slow brain thinks this might have something to do with the fact that I'm using the DV/firewire cable that I used to import the footage into my iMac, and maybe it only sends stuff OUT the firewire end, and won't send video the other way?
Do I need a different kind of firewire cable?

Thanks for your assistance!
I bought this camcorder from Amazon.com (USA) and I have not daisy-chained it anywhere. I've only connected it to one device at a time. It is capable of receiving digital as well as analog video, and can convert analog to digital.
For example, I used my stereo-video cable to transfer footage from an old VHS tape played by our VCR to my Canon Elura camcorder via the Canon's AV terminal.
Once the tape was safely transferred into my Canon camcorder, I then plugged my DV/firewire cable into the Canon's DV terminal, and the firewire end of it into the iMac. iMovie saw the Canon camcorder and imported all the footage very nicely.
Now I would like to transfer the edited footage from iMovie back to a mini DV tape, and my iMovie help file says I can do it, but it's a little sketchy on what cables I should be using.
The firewire/DV cable I used to send the footage IN to iMovie isn't working to receive the edited footage OUT of iMovie. So maybe I need a different kind of firewire cable?
Thanks for any help you can offer!

How to record to dv tape?

i have a Sony HVR-M15AU, and i know you can record to the tape via the firewire in... i'm just not sure how to go about doing that in premiere... is it at the capture area? the export area? in the time line? not sure.... running PrPro CC 2014

This page might help
Adobe Premiere Pro Help | Exporting to videotape

Recording back to tape

Similar Messages

Maybe you are looking for