Recording computer screen images to edit in Final Cut Pro?

Hi folks
I'm trying to record exactly the images from my computer screen to then edit in Final Cut Pro. Is this possible? Through the basic ilink cable or do I need specific software?
I have been recommended software called Snapz Pro, which allows recording the screen image, but I have no idea if it can then be edited to my choice in Final Cut Pro. Anyone help? Or does anyone have any other suggestions?
Thanks for reading.
Cheers
Cameron
eMac Mac OS X (10.4.7)
emac Mac OS X (10.4.7)
emac Mac OS X (10.4.7)

Snapz Pro works just fine, just bear in mind if you are capturing a screen area larger than video dimensions you will have to do some scaling and rendering (possibly) in FCP if you set Snapz to record a video size frame to DV NTSC/PAL codec it will be ready to use straight off. Snapz will even let you have the frame follow the mouse if you are using a monitor set to a higher res than video and don't need full screen but will be moving around the entire area (trust me this is easier to see in action rather than for me to explain)
Anyway to sum up YES SnapzPro will work for the project you describe

Similar Messages

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p? How do I maintain the highest quality?

No...ProRes is a high quality format. Finishing format. Many TV networks take that as a final deliverable.
BUT...DVDs aren't high definition...they are SD. You cannot make a 720p60 DVD with DVD Studio Pro. Any DVD you make will be SD...720x480. The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Converting Nokia N95 video for editing in Final Cut Pro?

I have some .mpeg4 videos shot with a Nokia N95 mobile phone that I want to edit in Final Cut Pro.
I read everywhere that .mpeg4 is not an "editing format".
I want to use Quicktime Pro (or Mpeg Streamclip) to convert the footage to something I can use in FCP *without degrading the original quality* but I am completely lost as to what settings I should use.
Can anyone point me in the right direction? I have done some test conversions but a side by side comparison in Quicktime of the original and converted footage showed the latter to be softer, less contrasty and with different colours. Not at all what I wanted.
I've posted this question on th eFCP and iMovie forums but haven't had any definitive replies. Is this really so complicated?
Thanks in advance!

I've been using iMovie 09 with these files but because the image quality is pretty poor I need the image correction functions of FCP. I can import the .mpeg4 files to FCP OK and work with them but I seem to spend all my time rendering. This is why I began to wonder if my initial file format and sequence settings were what they should be (and I am completely lost here).
The edited film will be uploaded to blip.tv and then embedded in websites. My concern is not to degrade the quality during my workflow.

What is my best hardware/software to convert vhs to digital so I can edit in Final Cut Pro X

What is my best hardware/software to convert vhs to digital so I can edit in Final Cut Pro X? Wondering if there is a solution under 100.00 or do I need to think a bit more. Thank you.

Have been doing this for some time, my setup:
I use an ancient "Symphonic" VCR player connected to an Elgato Eyetv Hybrid USB dongle. That plugs into my G5 Mac, 10.5.8, which runs Eyetv software v. 2.5.3.
Recording is dead simple after fiddling around a bit with software settings for channel, etc. Start the player, hit "record" on the software and wait for the end.
The recording is saved in some obscure ".eyetv" format with file size about 4 GB per hour of recording. The software has export to a variety of formats including QT Movie which results in a substantially larger file size.
Quality? Well, it's viewable and usable for archive purposes. I'm fine with it but more discriminating folks may want something better. I end up burning the video on a DVD using iDVD and that's not the greatest anyway.
There are various Elgato units available, and the Eyetv Hybrid seems to run bout $130.
Hope that helps.

Plz give me work flow of film editing in Final Cut Pro..

Hello Everyone...
I am basically a Avid Film Editor. Past 2 years I am using Final Cut Pro. Recently I finished Final Cut Pro Level 1 & T3. Right now I am working as a App. Support Engineer specially for Final Cut Pro .
I want know the work flow of film editing in Final Cut Pro. I am very interested to do film editing in FCP but the workflow from Avid to FCP its totally different.
I tried few options like using FCP & Cinema Tools..
1. Captured 25fps clips and cofirmed to 24fps in cinematools.
2. In FCP the Timeline frame rate is 24fps
But I am not able to understand..
1. What is Database?
2. Cant we capture 24fps in FCP?
3. How to Synchronize captured clips with Cinema Tools database?
4. How to link the captured clips in to Cinema Tools database?
5. Where do I enter the KN Start & KN End?
6. What about Pull List & Cut List?
Please give me the details of film technics in Final Cut Pro....
Thanks in advance....

I knew I'd find this same post here. That makes three versions of trhe same list of questions.
Posting three times here implies you have posted this set of questions in many other FCP forums around the Net. If that is so, do us all the kindness of returning to all of them and closing them. Include the suggestions you have received and the solutions that were successful for you. That way your multiple threads will show up on search inquiries when other confused FCP newbies try to start complex film projects.
It's a bummer you cannot find these answers in the FCP manuals, I'm usre you looked there first. But, since we run on volunteers around here, it may be several days before someone with enough practical CinemaTools experience can stop by and handle them for you. Please have some patience.
bogiesan

If i edit in final cut pro x, how can i create a dvd

What is the best DVD creator to download to create DVDs from movies edited in Final Cut Pro X?

iDVD gets my top vote - it is no longer available from Apple, but still part of the retail iLife 09 or 11 versions available from online resellers. It offers customizable menus/themes which will give your creation a professional look. It encodes/authors and you can burn directly from it.
Second is Roxio Toast (no customizable menus, but many other features and an excellent burn software).
I've tried DVD creator and found it to be too simplistic. Then there is Burn (free) - it burns.
I use iDVD to "create" and Toast to burn.

Which Mac Mini is best for Editing in Final Cut Pro X i5 or i7 ?

Hey guys plz suggest me a good mac mini machine for editing in Final Cut Pro X. Is there any difference in i5 mac mini or i7 in terms of rendering or editing, and what is the use of an SSD drive in terms of editing in mac mini either than its 5400rpm HD, or should i buy imac i5 with ssd ?
Lets see if i buy mac mini i5 with 16gb ram and a ssd drive, Will it work better than mac mini i7 with 16gb ram but without ssd drive ?
So guys plzz suggest me the best mac specs for video editing
Thanks in advance

Your budget?
Take a look at this: http://www.barefeats.com/minivmp.html
The 2012 Quad-Core i7 Mac mini is a real contender when it comes to CPU power compared to our examples of a Quad-Core Mac Pro and Quad-Core iMac. We plan to add some other examples of Quad-Core desktop Macs (including a faster Mac mini) to these graphs in the days ahead but the point is made.
However, the GPU in the 2012 Quad-Core i7 Mac mini is weak in comparison to the Mac Pro (and iMac) as you can see from the "Heaven" graph.
That's going to affect its ability to handle advanced Pro Apps that make use of the GPU for certain types of effect rendering.
These apps include Apple's Final Cut Pro and Motion as well as Adobe's Photoshop, Premiere Pro, and After Effects.
The Mac mini's Intel HD 4000 GPU will also hamstring hard-core gamers.
The Mac mini is also weak in support of OpenCL as you can see from the "LuxMark" graph.
It is forced to render the model using only CPU while the iMac and Mac Pro GPUs are able to render the model.
Why does this matter? Because apps like Final Cut Pro, Motion, and Photoshop use OpenCL acceleration for rendering certain effects.
http://www.barefeats.com/imac12p1.html
Even a Mac Pro (refurbished special 4-core 2.8 is $1819 and can be upgraded to more RAM, 4x4TB w/o going into Thunderbolt storage) and have multiple SSDs as the choice or need arises.)
Fusion drive + Thunderbolt but I think you are asking too much out of the mini. It is fine for a lot of uses.

I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

My HVR-A1U was able to capture just fine. The only issue I had is that it has mroe frequently than FCP 7 ever did find Timecode breaks and split my clip apart. I never had breaks before, so while it is possible I had them on this latest tape, I think X is just more picky. I mean heck, it found three in a one minute timeframe. My A1U worked with X without me needing to adjsut any settings form how I had it setup for 7.

Dose Premiere Pro 7 have an image wireframe setting like Final Cut Pro.

Dose Premiere Pro 7 have an image wireframe setting like Final Cut Pro.

Yes, click on your video clip, then go to Effects Control. The box you see to the left of the word Motion activates the wireframes.

How to convert my personal DVDs to be edited in Final Cut Pro 7?

Hi guys,
I am working on a project that need to edit my personal DVDs in Final Cut Pro 7, but what i need to do first is rip the DVD to a Final Cut Pro 7 compatible format, to which format should i convert the DVD? I am using iSkysoft iMedia Converter for Mac, it has many output formats. It is a little difficult to decide the right one.
Would you please help? If possible, please tell me the codec/ resolution/ bitrate . thanks in advance!
Albert

I understand what format DVDs are. My suggestion is - if you generated these DVDs, you must have the source footage. Why not use that?
I'd suggest you open the manual and start with the getting started section and work through any tutorials that came with your version. This program is complex and you need a fundamental understanding of more stuff than we can cover in this forum.
Ken Stone's website has a number of tutorials and is a good source of new user information as is Lyndia.com
x

Error messages during editing with Final Cut Pro

Hello,
I am working with Final Cut Pro for the first time, editing my first indie movie project. The software normally works fine and when I started this project it ran fine for a while. But the software is now operating increasingly slow, to the point where it won't let me advance frame by frame. And I am getting several error icons popping up in the viewer window and the clip window to the right and I don't know what they mean. One of the icons is a little yellow triangle with a black exclamation point in the middle. Another is a little whi circle with a black letter x in the center. Another is a small green circle with a check in it. Does anyone know what any of this means? Could I be out of ram on the hardrive? I noticed that the changes occurred as soon as I did ctrl + z to undo an edit - it went haywire right after that. I would greatly appreciate any tips, thoughts, suggestions. Thank you.

Slow performance can come from a number of different things. Without knowing more detailed information about your setup or workflow, it's difficult to accurately troubleshoot.
-What kind of Mac are you using?
-What is your source format?
-Where is your source footage located?

2012 mac mini i7 or imac i5 for video editing with final cut pro 7 ?

Hello,
I am totally new to mac world.
I read some posts but not clear to me if better a mac mini 2012 i7 2,3Ghz and video card Intel HD Graphics 4000 or an imac 2012 i5 2,7GHz and NVIDIA GeForce
GT 640M with 512MB of GDDR5 memory.
The software is final cut studio 3 from final cut pro 7.
So better more performance in the l cpu or in the videocard?
Thank you
Gianni

If the Mac Mini has not had its hardware changed since the release of Mountain Lion, July 25, 2012, Final Cut Pro 7 is reported as not working in some situations under Mountain Lion. If it has been hardware changed by Apple on or after July 25, 2012, you won't be able to run Lion, and may not be able to run all Final Cut Pro 7's features. The two entries for Final Cut Pro 7:
http://roaringapps.com/app:4449
and
http://roaringapps.com/app:4909
Appear to conclude it launches, but there must be something that doesn't work. There are some issues both with Lion and Mountain Lion with Final Cut Studio 3:
http://roaringapps.com/app:1384
My advice, check the Final Cut forums to see what people have experienced with both. And make sure to follow specs exactly.

IPhone 4 Video Editing In Final Cut Pro

So i just got an OWLE Bubo for my iPhone 4 and have been taking a lot of video lately that I wanted to start editing.
I've figured out that I needed to transcode the H.264 video the iPhone 4 produces to something edit-friendly like ProRes 442. I've done this in Compressor and its all gone fine and well, but it still makes me render everything that I put in the timeline...So something is off. It is a RED line so I believe this is audio related?
Note: I know the iPhone records audio at 44.1KHz and it needs to be at 48KHz to work in final cut...and my settings for the ProRes442 is converting it to 48KHz but it still doesn't seem to be working...
There is surprisingly little useful information on this topic online.

Yeah i know...Ive been pulling my hair out to try to find the difference between the sequence and the transcoded clips all week but there just wasnt any difference.
Somehow after a week of google searches and forum scouring i didnt happen to see this post...which absolutely solved my problem!!!
http://discussions.apple.com/thread.jspa?threadID=2506486
Anyone who's had this problem will hopefully find this thread or the original one a little quicker and not have to go through the stress of this issue.

Importing images with text into Final cut pro

I'm using FC Studio on a 15" Powerbook 1.67 GHZ 1.5 GB RAM OSX 10.4.9 with a 300GB external HD.
I'm editing a short film and am using some still images. I've successfully imported and used photographs edited in photoshop. I'm trying to import what is essentially a screen shot of a MSword Doc consisting of boxes, text and graphics.
I've exported the word doc to PDF and imported to photoshop with 300dpi and saved as both jpeg and png. When viewed in photoshop the resolution of the text appears normal. It imports sucessfully but when viewed in full size in the timeline or external monitor the resolution of the text is terrible. I've also tried adjusting the scale of the image in the Canvas.
I've read up on this issue a little and have tried reducing and increased the image size and dpi. Has anyone else tried to import still images with text??
I apolgise if this issue has already been addressed - I've tried using the solutions provided for still images (without text) but have come up against a wall!
I would appreciate any help or feedback!

I have used Adobe Illustrator saved out as.png with great results.
Larry jordan has good info for you here;
http://www.larryjordan.biz/articles/textindex.php

Can not make still image using share in Final Cut Pro x

This is what I get when trying to make a still image under share.
(com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
This is a new error message. Was able to make still image before.
Thanks for anny help in solving this problem.
Russ Andris

Hi again Russ,
just posted this over at Compressor because of the Compressor related error message I was getting wheN i tried to 'Share' a sill image from video.
Thanks for the tip Russ, I did not know that one. I had tried using cmd+shift+3 with Snapz Pro to screen capture which intially worked but then did not. I tried ditching the prefs and the apps with Digital Rebellion but had no luck in saving a still. But, I installed the new FCPX update and on first try I was able to export a stll frame, on one laptop anyway. BTW, must say, I am not keen on the 'Share' notion in an app like FCPX. What I considering I am doing when trying to obtain a stil image is exporting or saving not sharing. I hope Apple might considered amending such terminology, share seems appropriate for iTunes or iWeb but not FCPX.
One more thing, a truly odd one. Files marled as .mov from my Fujifilm X100 will not import into FCPX!!
That is truly amazing - Quicktime files not recognised by an Apple aplication!! Our trials are not over.
D

Recording computer screen images to edit in Final Cut Pro?

Similar Messages

Maybe you are looking for