Recording device missing?

I am trying to record using Nero Wave editor but Nero tells me its unable to open a recording device. I am using Windows 7 and my last computer worked fine with it. The only recording devices in Control Panel-Sound-Recording devices is Microphone and Line in. I'm wanting to record sound/music from the internet and can't seem to do it. Do I need to install another recording device from Windows?
Thanks
Jeff

You need an application program to capture streaming audio. See this article and look at the application program that is being used.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first

Why am I getting error msg: Pairing Record is Missing?

I have been syncing my iPhone with my Win7 PC for several weeks now, but I am suddenly getting the error message: "iTunes could not connect to the iPhone because the pairing record is missing". What does this mean, and why has it occurred? I've rebooted both my PC and the iPhone several times, with no luck. Just a few hours ago I successfully synced, and nothing's been changed on either device, but now I cannot sync. Thank you.

Do this:
Unplug your iPhone from your computer
Tap on the iTunes app
Scroll down to the bottom
Tap on your AppleID
Sign out
Sign back in
Plug your iPhone back into your computer
Your iPhone should now be recognized by iTunes.

ITunes cannot connect to my iPad because pairing record is missing.

This is a one month old iPad that I just upgraded to ios 5 before I used it. I don't know if the problem is in the upgrade.
When I did the upgrade, the message "iTunes cannot connect to the iPad because the pairing record is missing" came up. I figured I would call AppleCare in the morning. Yesterday I hooked the iPad up to the computer and it paired fine with iTunes (at least it showed in the left column under devices) but did not show up in My Computer as being hooked into a USB port. Now today it says that it can't pair with iTunes. Any ideas of what I do before I make an appointment with the Genius desk? I'm on the west coast and AppleCare hours are not compatible with my schedule. Wish I would have known it wasn't 24/7 before I purchased it.

This helped after all other fixes wouldnt
delete "itunesDB" and "itunesCDB" using this program
http://www.i-funbox.com/
See this video http://youtu.be/ZwTtqinbogQ
It works.

HT1386 what if it says pairing record is missing?

This is not the first time that I have added an iPod to our list but with this one it says pairing record is missing so it wont show up in devices. what do i do??

See:
pairing record ?: Apple Support Communities
A fix for those "Pairing Record Missing" errors | TUAW - The Unofficial Apple Weblog

Setting Stereo Mix to default recording device on Windows 8 HP Envy Ultrabook Kills Speakers

When I try setting Stero Mix to be my default recording device, the audio playback always cuts off after about 5-10 seconds or so. When it cuts off it doesn't sound good - it sounds like my speakers fry themselves to a quick and painful death if you can imagine that sound (ok, maybe i'm exagerrating).
Sometimes I have to reboot in order to hear any audio again on this ultrabook. Other times the audio will come back on its own after some time (it may always comes back over time, but most times i'm impatient so I reboot).
Is anyone else with my config able to set Stereo Mix to be the default recordgin and still retain a workable playback device? Anything else I can try?
I have the HP Envy Ultrabook laptop with Windows 8 Pro 64 bit.
Thanks,

I have since discovered stereo mix works when the laptop is plugged in. If it's unplugged it still will not work even though the setting "continue using while on battery power" is checked in the properties. If this is by-design I suppose I can live with this.

Hi,,does the new 2011 imac 27 inch U.S version support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

How can I record an audio file directly from a digital recording device directly to the iMac?

How can I record audio directly to my iMac from a digital recoding device?

What digital recording device?

I'm trying to move a folder full of "web archive" files to my IPad Mini. It says device missing services. Any ideas?

Hey all! Recently got an IPad Mini. Already have a Macbook. I have a folder full of songs(lyrics and chords) on the Mac. The file type inside the folder are all "Web Archive". I am trying to transfer this folder to my Mini, via Bluetooth. It won't allow me to transfer, it says "device missing services"? I have no idea what this means. Any help would be great. Thanks in advance.

You can't transfer files to another device using bluetooth.
I'm not really sure you can transfer web archives from mac to iOS device using itunes or icloud. Remember, on an iOS device, any file has to belong to an app. The device does not have a file system like the mac where you can move files into any folder you want.

Condition record is missing in sales order

can u please help me on my issue,my issue is in my sales order there are the different types of materials are there,on which the tax is applicable as12.5% on few materials,20% on few materials,on service materials tax is 10%, 2%, 1%,depending on this i have mapped the conditions and it is calculating accordingly,but when i see in sales order by selecting one material,when i go to conditions,analysis of that particular line item,it shows 10% 2% 1% condition records are missing,same wise verse when i select another condition and see the analysis it shows 12.5% condition record is missing,when i go and select the another condition,if i check the analysis it shows 20% tax condition record is missing,but its not throwing any error,and showing document is complete,can any one suggest is it the right procedure or i have to make any changes in to it.

Hi
I see no issue in this. It is correct system behaviour.
When you have different tax rates for different materials, obviously the condition records will be accessed based on the entries maintained for each material.
E.g For material with 12.5% tax rate when you check in vk13, you will find only that entry and no entries for 20% and 10%, 2% and 1%.
So the access sequence fetches only what has been maintained in VK11 for each material.
This is absolutely fine. Go ahead and save the order.
Regards
Madhu

No "Enhancements" Tab in Windows 8, Recording Device Properties

Hi, I just bought my HP laptop, a HP ENVY 15-q008TX, Windows 8.1. Whenever I'm using the microphone, I've found that the microphone automatically lowers its volume when it's too loud. It's obvious there's some auto-leveling going on in the background, be it by my audio driver or Windows. I don't want that and it's problematic when I'm recording audio for work.
Searching for answers on the internet gave me these common answers:
1) Turn off auto-audio adjustment in Skype -- Done. However, the auto-leveling issue I'm facing happens in other software, even when I'm not using Skype. So it's not a Skype issue.
2) Go to Control Panel > Sound > Select "Do nothing" for communications activity. Done, but issue persists.
3) Go to Control Panel > Sound > Recording Devices > Properties > Advanced > Unselect "Allow applications to take exclusive control of this device". Done, but issue persists.
4) The last solution I've found is to go to the "Enhancements" tab of Speakers Properties AND Microphone Properties and check "Disable all sound effects". This sounds like a possible solution except that my Windows 8.1 has no Enhancements tab at all for both Speaker and Microphone Properties.
I then tried checking the Beats Audio Control Panel (that's the audio software my laptop came with) which has barely any options.
In the "Listening Experience" tab, it doesn't show any auto-leveling option.
In the "Recording Experience" tab, it asks me to attach audio device when my headset microphone is clearly attached and it's working and detected by my Windows and other software.
So at this point I don't know what to do. I suspect there's some audio software issue going on. Any advice is appreciated.

I do not have any issue connecting a microphone. That connecting error in the screenshot seems to be something wrong with the Beats software itself than any issue between my microphone and the HP laptop.
To clarify:
1) My microphone works perfectly and it shows up in Windows Control Panel.
2) I have used my microphone over Skype with no issues.
3) I have recorded many audio recordings with my microphone with no issues.
Where I do have an issue with the microphone, as I have outlined in my original ticket, is that there seems to be an autoleveling or loudness equalization going on where any input audio that goes beyond a certain volume will automatically be softened for 10 seconds, before the microphone increases volume again. I have found this issue reported many times in other forums and apparently it's a common issue, and the solution seems to be to disable the loudness equalization in my Speaker/Mic properties in my audio control panel.
The issue here is that I cannot find this option to disable loudness equalization at all in my audio control panel, be it in Windows or in Beats audio panel (as I have cited in my original ticket). I would like some help to know where exactly I can find and disable the loudness equalization option in my computer because it has to be somewhere since it has been operating in the background.
The manufacturer is Sennheiser.

Data Records are missing in between while loading from R/3 (ECC) to BI.

Dear Experts,
I have created a custom DataSource on Custom Function Module. This datasource contains 600 fields. (I know its a monster and splitting options are thinner).
1) Validate the data using RSA3 in R/3 and showed the correct record count.
2) Validate the data by debugging the FM, still showed the correct record count.
But while loading from R/3 to BI, records are missing.
Various Scenarios load from R/3 to BI:
1a) Loaded full load (78000 records) with all default data transfer settings. PSA showed up with 72000 records (missing 6000) only. Compared the Idocs vs data packets, both reconciled.
1b) Loaded full load (78000) with modified settings (15000 KB / data packet). PSA showed up with 74000 records (missing 4000) only.
2a) Loaded with selection parameters (took a small chunk) (7000 records) with default data transfer settings. PSA showed up only 5000 records (missing 2000).
2b) Loaded with selection parameters (7000 records) with modified settings (15000 KB / data packet). PSA showed up all 7000 records.
3a) Loaded with selection parameters (took further small chunk) (4000 records). PSA showed up all records regardless data transfer settings.
Also please look at this piece of code from the function module,
IF l_wa_interface-isource = 'ZBI_ARD_TRANS'.
l_package_size = l_wa_interface-maxsize DIV 60.
ENDIF.
I really appreciate your advise or help in this regard.
Thanks much,
Anil

Hi,
Which module u want?
if its SD(for example)
steps>>
1>In AWB goto "business content"
2> goto "Info provider"
3>Under infoarea select SD cubes
4> Drag related cubes and ODS to right panel
5> Set the grouping option "In Data flow before&afterwards"
6>Install the collected objects
Go to R/3
7> Use Tcode RSA5 Transfer all regarding SD module datasources
Goto BW
8> Right click on the source system "Replicate datasources"
[DataSources|http://help.sap.com/saphelp_nw70/helpdata/en/3c/7b88408bc0bb4de10000000a1550b0/frameset.htm]
Edited by: Obily on Jul 10, 2008 8:36 AM

TS2776 I get a message that says"ITunes could not connect to IPhone becuase the pairing record is missing" I never saw this error message before. Anyone knpw what's up?

I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??

Do you still get that one if you restart the PC and try to connect again?

The recording device reported the media error: Unknown device error. (0x0C,

Hello
I have a problem making a DUAL LAYER DVD, i have done anothers before. But now I can't burn it.
It's a message error.
(The recording device reported the media error: Unknown device error. (0x0C, 0x00.))
Next this my Mac configuration.
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 6 GB
I have DVD STUDIO PRO 4.2.1, and in the log appears this:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 6 PGCs in VTSM1
Created 8 PGCs in VMG.
0 Menu(s) will be created...
Compiling Menu PGCs...
Writing VTS010.VOB
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Writing VTS010.VOB
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘UNTITLED_DISC.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 2
Doing opposite track path
Setting layer switch at sector 2053488.
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
What should be the problem?

There could be a few reasons, a common one is bad DVDs or a burner going bad.
[Some threads discussing the error|http://discussions.apple.com/search.jspa?threadID=&q=Therecording+device+reported+the+media+error%3A+Unknown+device+error.+(0x0C%2C0x00.)&objID=f952&dateRange=all&userID=&numResults=15]
You can try the [arrpoach in this thread|http://discussions.apple.com/thread.jspa?messageID=2453295&#2453295] as s start.
Take a look at this
Not sure which brand of DVDs you are using, but [this guide rates brands|http://www.digitalfaq.com/reviews/dvd-media.htm]
Verbatim are usually good for me for DL.

Error in SXMB_MONI - "Message Recorded (Commit Missing)"

We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.

Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A.

Recording device missing?

Similar Messages

Maybe you are looking for