Recording Failed Technical Fault 10 (28)

I've read similar posts but there doesnt seem to be a resolution. My 2TB is two months out of warranty, and now all of a sudden 8 out of 10 recordings are failing with Technical Fault 10(28). On demand works fine. I've upgraded the software and done a number of planner rebuilds. No change. I then removed all deleted items, updated software again and planner rebuild. No change. I tried to narrow down behaviour but its strange - i had something preset to record last night and it worked fine. While it was recording I went to a different channel and pressed the record button. Nothing happened (it didnt record). I then went into the the guide and selected the program I was watching and pressed record. The "R" came up against the program but if you went into the planner it was marked as "failed" already. I just called sky and they said a full reset "might" fix it and a few more planner rebuilds "might" also fix it. I'm reluctant to do a full reset given about 55% of my 2TB box is full of recordings - there has to be a better fix than that (and thats not even a guaranteed fix)! anybody any ideas / suggestions??

TF10 is usually fixed with a Planner Rebuild, though clearly not in your case. As you've tried this and a software refresh, and in the absence of a signal issue, the only remaining option is a full system reset I'm afraid.
EDIT: just a further thought. Try restarting your Sky box immediately before carrying out a Planner Rebuild: switch the box off at the plug and wait a full 5 minutes before switching back on and doing the Rebuild.

Similar Messages

  • Data Loader - Only imports first record; remaining records fail

    I'm trying to use Data Loader to import a group of opportunities. Everytime I run the Data Loader it only imports the first record. All the other records fail with the message "An unexpected error occurred during the import of the following row: 'External Unique Id: xxxxxxx'". After running the Data Loader, I can modify the Data file and remove the first record that was imported. By running the Data Loader again, the first row (previously the second row) will import successfully.
    Any idea what could be causing this behavior?

    W need a LOT more information, starting with the OS, and the version of ID, including any applied patches.
    Next we need to know if you are doing a single record per page or multiple records, whether the placeholders are on the master page, how many pages are in the document and if they all have fields on them (some screen captures might be useful -- embed them using the camera icon on the editing toolbar on the webpage rather than attaching, if it works [there seem to be some issues at the moment, though only for some people]).
    What else is on the page? Are you really telling it to merge all the records, or just one?
    You get the idea... Full description of what youhave, what you are doing, and what you get instead of what you expect.

  • Technical fault. Try later.

    I've been having same problem for a long time.  I have an Unlimited Korea plan and an Unlimited US & CANADA.  While I'm on the phone to Korea, suddenly the phone mutes and can't hear each other.  And then the skype message says "Sorry, we have a technical fault currently.  Try later."  I wait 5-20 minutes and try to call back to Korea, it keeps saying "...the technical fault currently.  ... try later"  I tried to find a Skype phone number which can't find.  So I ended up chatting with skype.  They told me I should unstall my skype from my pc and reinstall with the newest version.  I did it.  But NO HELP!  I'm very fed up for a long time with the same problem.  Can somebody help me???

    I got in touch with sky on sunday who where very helpful, they sent an engineer the next day who told me the dish was in the wrong place on the back of the house as we are surrounded by trees ( the original engineer told me it would be fine there then had to return to put it higher). So he said it should go on the front of the house like everyone else in my road so 1 engineer took the dish off the back and the other put a new one on the front, they where very quick and kept me informed with everything they did so fingers crossed no more technical faults and the visit was free of charge but i have said anymore problems and i will go to Virgin but i will see how it goes for now

  • [ADF-UIX] if Create record fails, it goes to Edit record, WHY????

    I must be doing something wrong, because I cant imagine that ADF reacts the way it does within my application.
    I have 2 datapages, browseDP and editDP
    I have 1 data action, createDA, I dragged the create method from my viewobject here
    The flow is as follows:
    browseDP(create button) --> createDA --> editDP
    browseDP(edit button) --> editDP
    This works fine
    But when a user presses the create button and the creation of a new record fails, the user
    will edit the record where the DB cursor is atm. But the user thinks he's adding a new record.
    You can understand that this leads to unwanted situations!
    There is no error message given to the user if the creation of a new record fails, it also doesnt
    return to the browse screen with an error message. Is this default behavoure of ADF? should I implement
    my own error checking mechanism when creation fails???
    Is there also a default flow option if a data action fails? I know success is default.
    Does anybody have some tips for me, I want to avoid the explained situation.
    kind regards
    a very frustrated developer
    Ido

    We've found solution to that problem, maybe someone will save few hours thanks to following trick:
    1. create UIX page with read-only table showing all the rows from details table
    2. Below the table put form that will let user edit currently selected row
    3. Insert "Create" submitButton in tableActions of the read-only table
    4. Button "Commit" and "Rollback" might be put below input form to save or cancel entered changes
    5. Now the tricky thing: instead of using submitButton that is binded to 'Delete' binding, do the following:
    a) created binding that deletes current row in detail table
    b) put button (not submitButton) and set it's destination property to "?event=mydelete"
    3) create event in UIX page that is called 'mydelete' and runs binding 'Delete'
    That's all - using that approach, when using clicks 'Add' and then 'Delete' he will not see JBO's saying that he didn't filled in required fields. It's a little bit obscure, but for me it's acceptable :-)
    Leszek Deska

  • QT Pro - "Recording Failed"

    I'm running QT Pro 7.3 under leopard on my MacBook Pro.
    Each time I try to record a new audio or a new video, the recorder window comes up fine . But, when I press the red 'record' button, I get a message "Recording Failed. Recording failed to create a movie." I get the same message whether using audio or video recording. It doesn't matter if I manually select internal mic or USB in preferences.
    Any advice on how to track this down? I can record in Garage Band, Amadeus Pro and Ubercaster, but QT is best and easiest for my needs.
    Thanks.

    I figured out the problem - when I transferred the setting from old Mac to my new Mac, the default location for saving recorded files was the desktop. Apparently there is a different file location for 'desktop' in Leopard than in Tiger. So, when I re-pointed the default directory in preferences to 'Desktop' again, that solved the problem.

  • Quicktime Pro 7.1.5 on MacBook Pro 17inch (Recording failed to create movie

    I went into Preferences and changed the camera from the built-in iSight to a USB camera (that works fine with iChat).
    When I tried to create a new movie I get the error:
    Recording failed.
    Recording failer to create a movie
    behind the error box I can see a black QT screen.
    suggestions? I could have sworn I switched cameras before in QT.
    Thanks, --bill
    MPB 17in - 3GB Ram - 200 GB Mac OS X (10.4.8) I also have a G5

    No really this is an Intel only bug. Hopefully someone at Apple reads this.
    I have a USB Logitech QuickCam Pro 5000.
    On my G5 this will happily record movies in Quicktime, provide images in IChat and work with Photobooth.
    On a February 2006 Macbook Pro, IChat works, Photobooth defaults back to the built in iSight (is there any way of changing this??), it even works with Windows on Parallels, but Quicktime fails as described above with the 'Recording failed to create a movie' message.
    Both computers are running MacOS X 10.4.9 patched right up to date.
    USB cameras must be supported on current systems - the built in iSight is USB connected!!!
    Bill

  • Merging local records with device records failed

    Hi,
    I have a macbook with OS X 10.4.11 (Intel procesor)  I did install the latest Pockect mac for blackberry version (the current one in the Blackberry's page), i use to use the old one, since I did the updated I can't get that both, device and Mac SYNC any item, no contacts, no calendar... 
    The message I got last time was: 
    06:06:57:140 merging local records with device records failed. 
    Could some one with me a light on this bug?
    Thanks 

    Hi rguardia,
    Can you try synching one PIM database at a time, e.g. just Contacts by itself, so we can determine which database is experiencing the problem?  The error you are receiving is likely being caused by one specific database.
    Once you have identified the database that is causing problems, can you perform the steps listed below:
    1 - Run Data Purge on the affected database.  Data purge can be found in the following location: 
    Mac HD/users/<Home User>/Library/Application Support/PocketMacSyncManager/Additional Tools. 
    ***Please note this utility will delete all information stored in the selected database on your BlackBerry however once the information has been deleted from your device you can reimport the data to your BlackBerry from the application on your Mac.
    2 - Run Sync Clean, which can be found in the same folder as Data Purge. 
    3 - Disconnect the BB from the Mac, remove the battery from the back of the device, wait 10 seconds then reinsert it
    4 - Reboot the Mac
    5 - Reconnect your BlackBerry to your Mac
    6 - Open PocketMac and select Reset All Devices to First Sync State from the Devices menu
    7 - Configure synchronization settings for the affected PIM database, choosing the option to Overwrite Device.  If the data is successfully transferred to the device, reconfigure PocketMac back to doing a two-way sync.
    If you are still running into the same problem after performing the steps above, try synching one category of the affected database at a time. To do this, click on the tab of the database you are trying to sync, click on Advanced Preferences next to the selected application, and choose the option to sync only selected categories. Try synching with only one category selected at a time, just to see if the issue is related to data within a specific category.
    Let us know how you make out!

  • Technical fault hang up and try again

    Hi I keep getting the message that we are having technical fault so please hang up and try again but the skype heart beat is saying everything should be working just fine

    Hello,
    Thank you for bringing this to our attention.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Cannot connect we just had a technical fault

    I have been trying to call Italy as usual but every time i called I get the following message. We just had a technical fault . try in few minutes. I have been trying to for 30 minutes. NO luck
    What's the issue ?

    you will get this message if you use another Skype client to call and use your Skype To Go (STG) number
    STG it is designed to be called from a landline or mobile phone, not from Skype
    if you are hearing this message for some other/unknown reason you may wish to contact customer service
    Regards,
    Neil

  • We've just had a technical fault

    Very annoying when my number isn't recognised so I have to insert that & my pin up to 10 times in succession because skype has a technical fault. This has been going on for months now so skype please get it sorted!

    Babs2g wrote:
    I am experiencing the same issue. I am trying to make business-related calls and because skype is experiencing a "technical fault", I am missing out on training opportunities.
    please describe, in more detail, how you are using Skype To Go
    in case it is not obvious, you should NOT be calling a Skype To Go number using a Skype client
    Regards,
    Neil

  • Records fail to import

    Hi All,
    When i perform import through import manger.
    I get a message that the some records failed to import because they are used in WF.
    I understand the reason of failure..However when the Import log pops up on failure of import.
    This import log does not seem to give  any particular info of which records have failed.
    No unique Id of the record.How will i be able to find out ,if i have imported 50000 records and some records fail while importing.
    How will i find out which records have failed.?
    Thanks
    AJ

    Hi Amruta
    ENABLING TRACING AND AUDIT TRAILS IN THE IMPORT LOG
    The Verbose parameter in the mdis.ini file controls how much
    information is included in the Import log (see u201CMDIS Configurationu201D on
    page 396 for more information about the mdis.ini file).
    Settings for the Verbose parameter in are described in Table 91.
    Table 91. Verbose Parameter Settings
    Setting Hexadecimal Description
    Verbose OFF 0x0000 Turns off all verbose settings
    Verbose ON 0xFFFF Turns on all verbose settings
    FI Verbose 0x0001 Adds verbose field information
    XML Verbose 0x0002 Adds verbose XML processing information
    MAP Verbose 0x0004 Adds verbose field mapping information
    THRD Verbose 0x0008 Turns on STRUCTX, VALUEX, and IMPORTX settings
    PARSER Verbose 0x0010 Adds XML/text parser audit trail
    STRUCTX Verbose 0x0020 Adds structural exception thread audit trail
    VALUEX Verbose 0x0040 Adds value exception thread audit trail
    IMPORTX Verbose 0x0080 Adds import exception thread audit trail
    CHUNK Verbose 0x0100 Adds chunk processing audit trail
    VxR Verbose 0x0020 Adds virtual extended record audit trail
    Last option may help you. Also the logs can be accessed via the Server/MDIS/Logs where you can see the Import logs.
    best regards
    Ravi

  • Sync error: Uploading records failed: "client issue: request body too large"

    1328917629619 Sync.Engine.AdblockPlus DEBUG Uploading records failed: "client issue: request body too large"
    This happens from 2 Win 7 computer and 1 Win XP computer sync'd. Without the Add Block Plus being sync'd everything works.

    Hi!
    That's a problem with the Add Block Plus sync engine. It seems that they have issues on their servers.
    Try to ask the same question in their forum: https://adblockplus.org/forum/
    Good luck!

  • Audio recording "failed," need to rescue the AIFF file

    I recorded a rather long audio file from the analog audio-in port of my Dual G5 in AIFF format (stereo, 16 bits) using the QuickTime Player. Upon clicking the "Stop Recording" button I got a message dialog "Recording Failed". I copied the file with the Finder before clicking OK, suspecting that QuickTime would delete the file upon clicking OK, which it did do. The copied file is 10.28 GB and contains 11 hr, 35 min, 2 sec of recorded material. Quicktime refuses to open the file, giving me the following message: Alert: QuickTime cannot open the file: "Audio 2 copy.mov" the movie contains an incorrect duration (-2014).
    Note that VLC opens the file, knows the exact duration of the audio tracks, and plays it back perfectly fine. I can even jump to different time points to continue playing.
    Is there a utility I can use to "repair" the file, so that QuickTime can open it? I hate to discard this file, since it is mostly intact.
    Dual 1.8 GHz PowerPC G5   Mac OS X (10.4.6)   3.5 GB DDR SDRAM

    Is this dotmac.info bob?
    MPEG Streamclip (free) may be able to repair the broken time code.
    You could also re-record the file using WireTap. Record while playing the file in VLC. Note: This is "live" recording so it would take a long time. Maybe record in smaller "chunks".

  • Video Camera Recording Failed

    I was trying to take a video with my phone today and every time I pressed the record button a notice would come up saying recording failed.  I tried closing the camera and then bringing it back up but it still says recording failed.  Anyone have this problem and know how to fix it?

    droidcharge1996 wrote:
    I was trying to take a video with my phone today and every time I pressed the record button a notice would come up saying recording failed.  I tried closing the camera and then bringing it back up but it still says recording failed.  Anyone have this problem and know how to fix it?
    Hi droidcharge1996,
    First troubleshooting step will be to reset your phone's camcorder to default settings. From the home screen touch Applications>Camera>Mode(switch to camcorder)>Options>Settings>Reset. Once your settings are reset try using your camcorder.
    Additionally, a corrupted SD memory card may be causing the error. Format your SD card. Keep in mind that formatting erases all content from the memory card and prepares it for use with your phone.
    1. From the Home screen, press the Menu Key>Settings>SD card & phone storage.
    2. Touch Unmount SD card.
    3. After unmounting the SD card, touchFormat SD card, then follow the prompts to confirm the formatting of the card.
    I trust that the above steps will resolve your phone's camcorder concerns.

  • Part recorded technical fault-7

    hi guys,  1st Time poster although I've been a member for a while... I've recently started getting the above error message, and reading the posts on this topic seems it's a common problem with this model of box,  the model in question is the DRX895... I've tried a couple of the solutions offered by the members on these threads, but nothing has worked so far, so I'm of the opinion that I need to complete the reset option...  My question is though what about the 287 programs on my box...  Is there anyway of retaining the programs? Or is there any way of uploading them back to the box once the problem has been resolved?? ive got a feeling it'll end with the Engineer visit and the box been replaced... any my help would be appreciated... cheers Mike 

    The only way to save your recordings, I'm afraid, is to copy them to DVD. As that's a real-time process, I'm guessing that wouldn't be practical. There's a long outstanding request to Sky to develop a means of transferring recordings between boxes, but as yet, no solution. As you've identified a full system reset (and a replacement box) will mean your recordings will be lost.

Maybe you are looking for