Recording Flash with iShowU and importing into FCP?

I need to create some motion graphics for a video, though I am not good enough yet with Motion and would like to use Flash. I am wondering if there are any issues with creating my project in Flash, playing it back and recording it with iShowU and just bringing it into my FCP project this way. It seems like it should work fine, just want to see if there might be anything I am overlooking?
Thanks.

I"m not slamming iShowU. It's great, and it's easy to use.
I would just choose graphics built using Motion over graphics built using Flash and then iShowU, the quality will be significantly different. But that's my opinion and depending on your final destination (like a podcast for instance) you may be better off going your direction. With regard to audio though, be aware that iShowU compresses audio using AAC.

Similar Messages

  • Capturing with iMovie and importing into fce 4

    Hi, everytime I try to capture mini dv footage from my Panasonic camcorder using final cut express, the transfer/capture crashes.
    However, capturing using iMovie 08 gives me no problems at all.
    Before I spend more time looking into the errors, if I capture using iMovie 08 and then import that into fce 4, am I losing any audio / video quality? I read somewhere that iMovie works off raw dv files - is this what would get imported into fce?
    Note: I would import the iMovie project into fce and not be exporting first from iMovie and then importing into fce.
    thanks

    My video is on mini-DV. The camera I used to record was a panasonic ag-dvx100 PAL. I am using DV-PAL easy setup. I am playing back with a panasonic nv-ds30 camcorder (I rented the other one).
    I have now managed to get past the dropped frames - that seemed to have been the test tape. I am now using a different tape, the actual tape i used for the footage. Now everytime I capture (using either mark in/out or capture now) the capture stops with a locating timecode and then breaks. I can't seem to capture it all in one go. This scene when I shot it was a single scene so there were no stops/pauses during the recording.
    There seemed to be some discussion on this in the thread (http://discussions.apple.com/thread.jspa?messageID=4183209#4183209) but that was a different camera.
    any help would be great.

  • Problems with conversion and import to FCP

    I have some files in m2ts format and convert them to Quicktime using iSkysoft video converter.
    When I import to FCP and render where there is a lot of action I get a wavy pattern all over the image (maybe related to interlace) is there a filter to fix this or another conversion program?
    (Im using FCP 6)
    Message was edited by: Andreas Sweden

    I have tried with MPEG Streamclip that I usually use as well but it will not take the files. I am just trying out iSkysoft for this and it appears to be a descent program.
    I have tried Xvid encoding and H.264 (only two options available), I tried to convert to .DV format as well but with same result.
    It appears that the material becomes interlaced twice on top of eachother

  • Canon Vixia HF10 and importing into FCP

    Can anyone tell me how to import from the Canon Vixia HF10's internal memory into FCP? It seems that there is only a USB connector on the camera and FCP only supports Firewire. Any suggestions?

    Dear Jerry,
    I have the same issue. Just got the camera. I can copy the "private" folder which contains all the information which I believe is based on .MTS type files.
    I was hoping that I could somehow just load these clips in directly as I used to use a canon miniDV which required me to play the entire clips.
    I have mpegstreamclip but am not too familiar. Is there any other way other than having to convert each and every clip?
    Thanks so much for any advice you can give me.
    Skip

  • I'm creating a lower third in Motion and importing into FCP X, but the alpha channel is gone when I import into FCP.  What am I doing wring?

    I'm trying to export from Motion 5 with an alpha channel, but in FCP X the alpha is gone. What do I do?

    if you're exporting video animation out of Motion and you need transparency, then you need to make sure that the codec used is ProRes 4444. There are no other options.  From the Share > Export dialog, the default Export option is usually "Same as Source." In Motion, that *should* be PR4x4. You can double check that setting by clicking the summary button and reading the last line.
    You also need to make sure under the Render section that Color + Alpha is selected (that should also be the default setting.)
    However, most of all, you're really wasting your time going about it this way.  If you started a Title project in Motion, all you have to do is Save and give the project a Name; pick a category or create a new one.  In FCPX, in the Titles browser, look for the category you used and find the project name and drag it onto the storyline.
    You have the option of picking parameters in your motion project that you can "publish" to FCPX (things like the lower third background color, text color, positioning, etc... almost every parameter is publishable to FCPX allowing you to customize the project *inside* FCPX.)  Any parameter you publish in Motion will be in the Title Inspector in FCPX. You do not have to "bake" your lower third in Motion before using it in FCPX. You can pretty much turn your project into an FCPX plugin.
    If you didn't start a Title project, you can still build your lower third as an FCPX Generator. Go to the File menu and Publish Template...  In the dialog box, make sure you check Publish As Final Cut Generator. Give the project a Name and select a category (you'll need to wait a few seconds until the Categories update to the FCPX categories...) You can create a custom category if you like and save the project. In FCPX, instead of the Titles browser, look for your template/plugin in the Generators > WhateverCategory > YourLowerThird.

  • Motion project imported into FCP looks different...

    I have a Motion project that moves 17 magazine covers across a background. When I preview it in Motion it looks great, but when I import it into FCP the mags overlap and run into each other. What could be happening during import and is there a fix??

    I'm posting in response to my own question because this may actually be a bug. When I import the Motion project into FCP with the Motion layers locked, the animation is altered. When I go back into Motion and unlock all the layers and import into FCP, the animation is perfect. No kidding, locked tracks and the animation is funky, unlocked and it's fine. Anyone ever stumble on this??

  • After effects animation Codec won't import into FCP

    Hi
    I have used After Effects to do a green screen key on some HD 1080i footage.
    I then went to export - quicktime movie - animation
    I understand that the animation codec is the only way to export with an alpha channel so that I can put other footage in after my nice green screen key.
    I set quality to best and frame rate to 25, I also tried frame rate as current and it exports and plays back fine in quicktime movie player, but won't import into final Cut.
    The error message is "wrong frame rate"
    Does anyone have any suggestions? I am quite new to after effects and wonder if there is something wrong with the way it is seeing the footage as I shot in widescreen and the image is squeezed as for a 4:3 TV aspect ratio.
    Thanks.
    Ajay

    1. Check your AE composition settings (cmd-k) and be sure your frame rate is set to 25... AE uses the frane rate of your composition and not the settings in your export module...
    2. Do not use the "export" command in AE... that is used only for special purposes only (i.e. for using "quicktime exporto compnents" not available under the export queue)...
    3. use the "make movie" or "add to export queue" command instead
    4. You expot module should be set as:
    - best settings
    - animation + alpha
    do not specify any frame rate in the export module!! AE automatically uses the frame rate in your composition settings!!
    5. Export and import into fcp...
    I never had problems with AE animation+alpha and fcp 6.0.1

  • Creating animations that will import into FCP

    What are some program options for creating and manipulating objects like squares, rectangles and circles that will be used for creating animations to be imported into protions of FCP projects. The final output will be DVD's. Director MX2004 works very well for creating the animations, however when converted to a QT movie and imported into FCP, the animations look like a copy of a VHS tape. (Export settings were component video.) The animations are not acceptable when viewed on both a TV and NTSC monitor. Is anyone successfully using Director for such an application? I would certainally appreciate any suggestions.
    G5 2 X 2   Mac OS X (10.3.9)   G4 15" Power Book

    I agree about the material that is coming out of Director being the problem.
    The fundamental questions is "is Director capable of this kind of output?"?? I was hoping someone would tell me "this is how I did it" or "It is impossible using Director". All I know is there was some animation from Director in at least top movie a couple of years--I don't remember its name. So someone was able to get animation out of Director good enough for the film industry!
    As for other questions you posed. The vector graphics I need can be created and manipulated as I need in Director. The whole project could be done in Director and outputed as a cross platform "projector" from a Mac or PC version of Director. However, there some issues with keeping things "in time" using Director. Using Director for the whole project is "plan B".
    With regards to your other questions. In short, I want to animate some very detaliled shop type activities that are hard to video and understand. The animations will compliment the video and will show/simplify concepts needed to learn particular shop skills.
    I want to make and market a series of DVD on these shop activites. Yes I know it is not a small project. I have been working on problems relating to everything from copyrighting to the insurance/liability aspects for several years. I also have the hardware & software to make DVD "demos" and examples to "show and tell". Now I need some help getting the stuff to do what I want/need!
    FCP is the best option for "putting together" audio, video and amimation before making a DVD.
    Thank you for your input.
    G5 2 X 2   Mac OS X (10.3.9)   G4 15" Power Book

  • Help on export sybase iq tables with data and import in another database ?

    Help on export Sybase iq 16 tables with data and import into another database ?

    Hi Nilesh,
    If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
    Extract/ Load table
    Insert location method : require IQ servers to be entered in interfaces file
    Backup/Restore : copy entire database content
    If you have not the DDLs, you can generate them using IQ cockpit or SCC.
    http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
    http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
    Regards,
    Tayeb.

  • Motion animation when imported into FCP comes out as 4:3 instead of 16:9

    Hi,
    I'm trying to create a bumper animation for my feature film. I started in Motion 3 created a simple animation and imported into FCP and flagged it for 16:9 but still comes ot as 4:3 when exported to Quicktime. Any ideas as to why?
    Chris

    Set the anamorphic flag. Click on you clip in the FCP timeline or browser and type ⌘9. Check the Anamorphic flag.
    Patrick

  • HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

    Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

    Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
    Ian Turner wrote:
    Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
    Ian

  • My video that was taken with a digital camera and imported into iPhoto plays back at a very fast speed. Any ideas why?

    My video that was taken with a digital camera and imported into iPhoto plays back at a very fast speed. Any ideas why?

    Is it a slow motion video? iPhoto does not understand the slow motion tags created by some cameras, eg.g. the iPhone back camera.

  • LiveType .ipr won't import into FCP - File type not recognized

    LiveType file is greyed out when trying to import into FCP as a Standard File type. If we change Standard File to All Files we get an error stating, "File Error: 1 file recognized, 0 access denied, 1 unknown."
    The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager.
    We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.
    Is it time for a reinstall of FCP Suite?
    G4 Tower 1.42 Ghz Mac OS X (10.4.7)
    G4 PowerBook 667 Mac OS X (10.3.7)
    G4 PowerBook 1.67 Mac OS X (10.4.7)
    G5 2.5Ghz Mac OS X (10.4.7)
    iMac G5 1.8Ghz   Mac OS X (10.4.7)  

    The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager. We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.< </div>
    This is usually two things: In compatible versions of FCP or a missing element that allows the .ipr files to be imported. I have forgotten what the enabler is but it's obviously working on your G5 or you wouldn't be asking the question. If you create a LT file on your G4, can you import it into FCP on the G$?
    (You can search the forum for similar problems, it comes up about twice a month.)
    That leaves the problem of incompatible copies of FCP. You have not provided that information. FCP is not backwards compatible.
    bogiesan

  • 24fp importing into fcp 7

    hi, im a total rookie sorry for the stupid questions but i shot a bunch of footage with the hv40 pf24 cinematic mode and im trying to import into fcp 7, what capture settings are the best to use and what sequence setting should i use

    Check this forum, there is an editing section on it.
    You should be able to find an answer there.
    http://www.hv20.com/index.php
    Message was edited by: Francisco Garcia

  • UDF Export from OIM 11g R1 and Import into R2

    Has anyone ever exported user defined fields from OIM 11gR1 and successfully imported them into OIM 11gR2?
    I have tried exporting the user metadata via deployment manager in R1 and importing into a sandbox in R2 and the import fails with the following exception in the log:
    <Apr 8, 2013 2:49:14 PM UTC> <Error> <XELLERATE.WEBAPP> <BEA-000000> <Class/Method: LoadDeploymentUtility/displayImportSubstitution encounter some problems: Object specified is invalid.ORCLGUID [AttributeDefinition]
    com.thortech.xl.ddm.exception.DDMException: Object specified is invalid.ORCLGUID [AttributeDefinition]
    at com.thortech.xl.ddm.engine.SchemaInstanceFacade.populate(SchemaInstanceFacade.java:322)
    at com.thortech.xl.ddm.engine.SchemaInstanceFacade.addXMLSchemaInstance(SchemaInstanceFacade.java:253)
    at com.thortech.xl.ejb.beansimpl.tcImportOperationsBean.addLastPreviewedFilePrivate(tcImportOperationsBean.java:688)
    at com.thortech.xl.ejb.beansimpl.tcImportOperationsBean.addLastPreviewedFile(tcImportOperationsBean.java:664)
    at Thor.API.Operations.tcImportOperationsIntfEJB.addLastPreviewedFilex(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy381.addLastPreviewedFilex(Unknown Source)
    at Thor.API.Operations.tcImportOperationsIntf_uawk3z_tcImportOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at Thor.API.Operations.tcImportOperationsIntf_uawk3z_tcImportOperationsIntfRemoteImpl.addLastPreviewedFilex(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    at $Proxy399.addLastPreviewedFilex(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
    at $Proxy400.addLastPreviewedFilex(Unknown Source)
    at Thor.API.Operations.tcImportOperationsIntfDelegate.addLastPreviewedFile(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy401.addLastPreviewedFile(Unknown Source)
    at com.thortech.xl.webclient.actions.LoadDeploymentUtilityAction.displayImportSubstitution(LoadDeploymentUtilityAction.java:1975)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
    at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
    at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
    at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
    at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
    at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
    at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
    at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
    at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
    at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
    at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:450)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:185)
    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
    at com.nexaweb.server.servlet.NexawebRequestDispatcher.doClientRequest(NexawebRequestDispatcher.java:347)
    at com.nexaweb.server.servlet.NexawebRequestDispatcher.forwardClientRequest(NexawebRequestDispatcher.java:114)
    at com.nexaweb.server.servlet.JspProcessor.processRequest(JspProcessor.java:137)
    at com.nexaweb.server.servlet.RequestProcessor.dispatchRequest(RequestProcessor.java:463)
    at com.nexaweb.server.servlet.RequestProcessor.processClientEvent(RequestProcessor.java:710)
    at com.nexaweb.server.services.protocol.NexawebProtocolHandler.handleProcessEventCommand(NexawebProtocolHandler.java:1026)
    at com.nexaweb.server.services.protocol.NexawebProtocolHandler.dispatchCommand(NexawebProtocolHandler.java:140)
    at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:420)
    at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
    at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:379)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
    at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
    at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:78)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Any ideas or suggestions? Thanks.

    There are multiple ways to do this. ODI, Essbase Studio or SQL interface in load rules are three. ODI is not free, but the other two I mention are. There are a few developers I know that prefer flat files as it is easier to trace back issues, but most o us use a SQL approach. Both Essbase Studio and Sql Interface can use either PDBC or OCI connections. Of course OCI connections are faster.
    While neither Studio or load rules has a scheduler associated with it, you can use the windows/cron/custom scheduler of your choice to schedule the process to run. Note that neither will run stored procedures/packages but just read from tables/views.
    The batch interface you would use is called MaxL and it interfaces with ODI, Studio and Load rules (Sql interface)

Maybe you are looking for