Recording from a video to DVD on my Qosmio

I have a qosmio G10. does anyone know how you can transfer your old videos onto dvd. i am confused about how to connect the video player to the notebook and which programme i should attempt to record in. thanks!

> I have a qosmio G10. does anyone know how you can
> transfer your old videos onto dvd. i am confused about
> how to connect the video player to the notebook and
> which programme i should attempt to record in. thanks!
Extremely easy. INstall "WinDVD Creator 2 Platinum for Toshiba" that is on the "Additional Tools & Program" CDs that was provided with your Qosmio.
After installation, reboot. Once you take control again, apply this patch (double click the .ref files)
http://support.toshiba-tro.de/tools/updates/windvd-creator-reg/regpatch-xp-na.zip
Now open winDVD Creator 2 and from then on you will figure all out by yourself. (you can select if you want to record from tv, composite or svhs). It will record in .mpg (MPEG2) format, ready to burn on DVD.
Later,
Alcahest

Similar Messages

How to record from the video in or S-video Ports on Qosmio G40?

Can anyone tell me how to record from the video in or S-video ports, because i've tried the Ulead DVD factory program and the only capture device it could see was the webcam, and it did capture from it
After that i've downloaded the update file that was provided by the support website
The devices that the program could see are the TV tuner and the webcam (which it couldn't access anymore for some reason)
After that i've downloaded a newer update which simply is the same as the last update and seems that someone in the support website directed the link of the new update which they don't have to the file of the previous update which doesn't really do anything.

Hi
There are 2 s-video ports; s-video out port is not designed to capture the signals from any external source. The name of this port says everything; its an OUT port!
The s-video-in port must be placed at the right side of the notebook. Dont mix the both ports. But note; this port receives only the video signals. To hear the sounds, use a video cable to connect the sound terminals of the audio device and your computer.
Red: sound right channel
White: sound left channel
The Ulead DVD Movie factory can be used to capture this signal.

HELP: Is it possible to record from multiple video streams using iMovie?

Is it possible to record from multiple video streams using iMovie.
I want to record a presenter on a greenscreen and also his powerpoint slides at the same time and cut from one to other.
Can imovie record from screen and camera at same time?
If so is there a link to somewhere explaining how to do so?
If not, what is the most efficient way to do so, without having to learn a whole complex program?
Please advise asap.
Very many thanks

Alan and Anthony,
Thanks for the quick responses. Unfortunately, there is no backup :(.
I will ask if they get logged into the global zone, but one thing I forgot to mention is that this zone (as are all our non-global zones and the global zone also) are configured for ldap logins.
Assuming that they can even try to login to the global zone, can they even see the directory structure in the non-global zone (sorry, I haven't worked with Zones much thus far) from the global zone?
Also, if they can see the non-global zones directory structure, what should they then try?
Also, I've been searching and I've seen some suggestions of running a "pkgcheck -af" which might restore the directory permissions to what the various packages expect. Assuming that they can get to the point that they can at least log into the zone, is that something that would work?
I'm setting up a new test Solaris box now, with a zone, to try to reproduce the problem. If I can reproduce the problem, I'll post back whether or not I see the same thing.
In the meantime, if anyone has any suggestions, please post them.
Thanks,
Jim
P.S. In case you're wondering, the box/zone that got messed up was a test/integration zone, and they were in the process of installing some software when this chmod happened.

How do I get videos that I have recorded from my iPad to dvd?

I have multiple home videos that I would like to move from my iPad to DVD. I do have a laptop but it is not an apple product. Does anyone have any suggestions?

Using Pages (for word files) and Numbers (for excel files), you can buy both from the Mac App Store

How do I maximize quality when recording from HD DVR to DVD RECORDER?!

Does anyone know the best way to copy from your HD DVR Cable Box to this Panasonic DVD Recorder? WHen I set it up as Best Buy Recommended, the quality I was previewing was HORRIBLE...any recommendations since it has tons of inputs/outputs?
THANKS!
CHAD

THANKS....
MY only concern is that I do not recall the 1080p, I thought my only option was 1080i.
I am not as dumb as I sound!!! LOL
THE HDMI to TV is that from the DVR?

Question about recording from VCR to Qosmio

I want to record my old personal Videos from VCR tapes to DVD using my Qosmio F10. I plug the VCR analogue output via a coax cable into the Qosmio TV aerial input and set up the Qosmio to recognize the VCR input as just another TV channel. It records onto the hard drive using MCE but the quality is poor compared to the original video tape. The colors and sound are ok but the pictures are lacking in detail and clarity.
Is there a setting on the Qosmio that I can use to improve the quality or is it the type of input I am using. My old VCR only has a coax and scart output and I can't get the scart output to input to the Qosmio.
Any help would be appreciated

> Hi Les,
>
> I believe the poor image quality is due to the use
> use of a coax connection from your VCR to your
> notebook. I use the scart output on my VCR to connect
> to a data capture card (USB) on my SA30, but I
> believe your Qosmio already has Composite inputs
> available.
>
> I use a SCART to Composite adapter (available from
> rom most PC retailers or electrical shops) and find
> that this gives me excellent image and sound (albeit
> not at DVD levels of quality).
>
> I have never managed to get an S-Video connection
> ion from my VCR to my SA30 to work other than in
> Black & White.
>
> HTH
Hi Nicky,
Thanks for the response. By Composite do you mean RGB output from the VCR?
The Qosmio has 3 inputs:-
1. conventional TV coax
2. S Video
3. iLink - firewire
There is no straight RGB input tho'
Can I use the iLink with a scart output from a VCR? The iLink works fine with my Camcorder.
tia
Les

Recording from DVD to iMovie.

Can I record from a DVD recorder/player either NTSC or PAL subject matter tranfered to a DVD into iMovie. This is not copyright material, but my own NTSC VHS tapes transfered to DVD. Do I need a converter box? What is the video format? Is this a possibiltity? I only have firewire in to the MAC. How do I do it?

Hello Alaner,
you don't need a converter box (although it's a possibility) but you can get the video off your DVD on your mac, converting it into something iMovie can handle
check out Dan Slagle's Unofficial iMovie FAQ
Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
helpful tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack:
http://www.apple.com/quicktime/mpeg2/
DVDxDV
http://www.dvdxdv.com/
hope this helps
mish

Recording audio from firewire video source

What does it take for Soundbooth (or more specifically OS X) to recognize firewire video as an audio source?
I have a video conversion box that accepts analog video/audio input and connects via firewire to my MacBookPro. I can use that to capture video with Premiere or OnLocation, and extract the audio from that, but in the event I'm just converting an audio source, I'd like to use the same box to capture audio directly to Soundbooth. But 'Audio MIDI Setup' shows only built-in input and a USB audio source.
Otherwise I either have to use built-in audio input (normally not available because I have external speakers plugged in), or get a USB or firewire audio interface. I'll probably do that eventually but was hoping for a software solution of some sort.

You should look into WireTap Studio from Ambrosia software. It will record ANYTHING at all that goes through your sound card, regardless of the original source. I know, "If I paid for SoundBooth, why should I go buy another piece of software?"
I've used Wiretap since 2002 when it was still a freebie. It's gotten a lot better in eight years, and when you see everything you can do with it (like recoding streaming audio from the web, or podcasts, getting soundbytes from DVDs, or recording from your TV or even live with a mic) you'll agree that it's another $69, but $69 well spent.
I used Wiretap to convert more than 1400 cassettes into mp3. I've also pulled songs from movies that are unavailable anywhere. I've recorded live TV audio. You have a multitude of format and quality choices for recording and saving.

Creating a DVD from camcorder video tape

Hi all,
I am tasked with creating a DVD from some of my dads camcorder tapes. Can anyone provide a simple advice list. I assume that iDVD (which i have never used) will be the software to use?
Look forward to hearing from you helpful and intelligent people out there.
From a complete simpleton.
Kind regards,
Alan

The easiest way (if you don't want to do any editing)
buy a dvd player/recorder, connect the video out of the camcorder to the dvd recorder input.

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not. My question are: Why does my computer think it's blank? And how can I copy a DVD?

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, Sheila

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Is it possible to use a still frame as a picture from a video you have recorded on an iphone 4?

Is it possible to use a still frame as a picture from a video you have recorded on an iphone 4?
Message was edited by: derekfromco kildare

Might need a little more information here. Are you trying to obtain screen captures? If all you're wanting to do is take stills from your videos then the answer is yes, you can but you'll have to transfer your videos from your iPhone to your computer first (unless you can find an APP on the iTunes store to help you to do it on your iPhone).
There are a few ways to do it. The first is that you can use the button on your keyboard called "Prt Scr" or "Print Screen". This takes a shot of your screen which you can then "paste" into a program like paint, or photoshop or even Word to then save as a jpeg image. When using this option a good trick is to use "Alt" + "Prt Scr" to only capture the current window rather than your entire desktop.
The other way to obtain screenshots is to download and install a program designed to do this for you. A great site to find something free to help you out is www.tucows.com. Try this link: http://www.tucows.com/search.html?search_scope=win&search_terms=screenshot&searc h_type=all
Also, some DVD programs have this function in built in them so it's a good idea to explore what's already installed on your computer.
Hope this helps!

Recording from CD or DVD

On my G575 is there a way I can record the sound (or part of) of a DVD I am playing? Thanks in advance.

hi TonyVella,
You will need a software to record a sound / video from a DVD playback. Try the following:
1. How to record a DVD using VLC - You can get VLC here.
2. Recording audio playing on the computer using Audacity - You can get Audacity here.
Let me know if you encounter some problems.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

I burned an edited movie to disc using H.264 codec and a second movie to MPEG -4 Video both worked well on my iMac but will not play on my Sony DVD Recorder/Player which accepts both DVD RW and DVD-RW. Any suggestions?

I burned an edited movie to disc using H.264 codec and a second movie using MPEG-4 Video. Both played well on my iMac but would not play on my Sony DVD Recorder/Player which accepts both DVD+RW and DVD-RW discs. I have tried other 'codecs' DV-PAL; DVCPRO-PAL; DVCPRO50-PAL; AIC; and finally share to iDVD. iDVD works on both my iMac and DVD Recorder but the picture is very poor with major shimmering which is unwatchable. Can anyone assist? The other codecs I used either do not pay on my video recorder or fail when I play them back on my iMac. I am at a loss as to what I can do. I am from the UK so using PAL is essential.

If the source video is interlaced, you may have problems using iMovie. It de-interlaces everything on output which can cause picture to look strange. Final Cut Pro X supports interlaced video, but it costs a lot more.
Standard DVD Players don't support H.264 or MPEG4. You might want to look at this article on transferring HD video to DVD. I wrote this article mainly for Final Cut Pro, but many of the same principles apply.

Recording from a video to DVD on my Qosmio

Similar Messages

Maybe you are looking for