Recording from casse

hi again
i forgot to ask-when your recording from a cassette tape to a cd how can i get the songs to fit onto a cd as a caseette tape is 90 minates and the cd is only 80 minates?thanks
coonsanders

SSR wrote:
I believe you can buy CDRs which are 90 minutes, but I'm not sure how well these work.
You can even find 99 minute CDRs. The only problem with the higher capacity CDRs (90+) is that some burners and some players do not support them. I would check http://www.dvdrhelp.com for compatibility of your burner and players before investing in these discs.
Are you using any specific software to enhance the sound quality of the cassette recording before transferring?

Similar Messages

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Return records from Stored Procedure to Callable Statement

Hi All,
I am createing a web application to display a students score card.
I have written a stored procedure in oracle that accepts the student roll number as input and returns a set of records as output containing the students scoring back to the JSP page where it has to be put into a table format.
how do i register the output type of "records" from the stored function in oracle in the "registerOutParameter" method of the "callable" statement in the JSP page.
if not by this way is there any method using which a "stored function/procedure" returning "record(s)" to the jsp page called using "callable" statement be retrieved to be used in the page. let me know any method other that writing a query for the database in the JSP page itself.

I have a question for you:
If the stored procedure is doing nothing more than generating a set of results why are you even using one?
You could create a view or write a simple query like you mentioned.
If you're intent on going the stored procedure route, then I have a suggestion. Part of the JDBC 2.0 spec allows you to basically return an object from a CallableStatement. Its a little involved but can be done. An article that I ran across a while back really helped me to figure out how to do this. There URL to it is as follows:
http://www.fawcette.com/archives/premier/mgznarch/javapro/2000/03mar00/bs0003/bs0003.asp
Pay close attention to the last section of the article: Persistence of Structured Types.
Here's some important snippets of code:
String UDT_NAME = "SCHEMA_NAME.PRODUCT_TYPE_OBJ";
cstmt.setLong(1, value1);
cstmt.setLong(2, value2);
cstmt.setLong(3, value3);
// By updating the type map in the connection object
// the Driver will be able to convert the array being returned
// into an array of LikeProductsInfo[] objects.
java.util.Map map = cstmt.getConnection().getTypeMap();
map.put(UDT_NAME, ProductTypeObject.class);
super.cstmt.registerOutParameter(4, java.sql.Types.STRUCT, UDT_NAME);
* This is the class that is being mapped to the oracle object.
* There are two methods in the SQLData interface.
public class ProductTypeObject implements java.sql.SQLData, java.io.Serializable
    * Implementation of method declared in the SQLData interface. This method
    * is called by the JDBC driver when mapping the UDT, SCHEMA_NAME.Product_Type_Obj,
    * to this class.
    * The object being returned contains a slew of objects defined as tables,
    * these are retrieved as java.sql.Array objects.
     public void readSQL(SQLInput stream, String typeName) throws SQLException
        String[] value1 = (String[])stream.readArray().getArray();
        String[] value2 = (String[])stream.readArray().getArray();
     public void writeSQL(SQLOutput stream) throws SQLException
}You'll also need to create Oracles Object. The specification for mine follows:
TYPE Detail_Type IS TABLE OF VARCHAR2(1024);
TYPE Product_Type_Obj AS OBJECT (
value1 Detail_Type,
value2 Detail_Type,
value3 Detail_Type,
value4 Detail_Type,
value5 Detail_Type,
value6 Detail_Type,
value7 Detail_Type,
value8 Detail_Type);Hope this helps,
Zac

Display all records from 4 select list

Hi,
trying to associate 4 select list where i could display all records from a list linked to an other list.
1./ Created an item for each select list
P1_employee_name
P1_departments
P1_employee_type
P1_locations
2./Set both null and default values to '-1' for each item
3./Associated these items to source columns in the Region:
where employee_name=:P1_employee_name
or :P1_employee_name ='-1'
and departments=:P1_departments
or :P1_departments ='-1'
and ......
When running the report, couldn't display all records from a given list associated to an other list.
e.g: Display all emp and type of emp for sales dept in Paris.
Thks for your help

I believe the issue is that you need to group your predicates such as:
where (employee_name=:P1_employee_name
or :P1_employee_name ='-1')
and
(departments=:P1_departments
or :P1_departments ='-1')
Also, if you are not already using the "select list with submit" type items, these work great for this case as the page will be submitted when the user changes the value of employeenam and the report will then reflect this change.

Excluding of records from extraction

Hi Experts
1. I am in need of code to exclude the records for a particular value of the fields AUART and                 VBUND
      For records with the following criteria should be EXCLUDED
          Sales Order Type (AUART): ZCP
          Trading partner (VBUND): 1261
      I know that we can write the code at start routine of the transformations but what to write in
      the start routine of transformations
2. I have an extractor bringing data from ECC to info cube with alternative unit of measure
    Now I need to undo these conversions in the current extractor and bring in these values from a
    Custom Z table from ECC using generic extractor
And I am doubted in how to undo these conversions from the current extractor to the cube
Please help me
Thank you

Hi
1. Open the transformation and click on start routine
2. The ABAP editor screen appears and you can find this part in the abap editor of start routine "$$ begin of routine - insert your code only below this line        -
... "insert your code here"
3. Please delete the line "insert your code here" completely and paste the code which i gave you.
4. Check for syntax errors and activate the transformation.
5. Also activate the DTP.
Also please dont not put the code below "begin of global or 2nd part of global".
Plz lemme how many records you have in rsa3 without any selection. The infopackage will just fetch the records from the source and it will not do any transformation.
Hope it helps.

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

DTP does not fetch all records from Source, fetches only records in First Data Package.

Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
Shiva

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

Table of records from a stored procedure

Hi
Where could I find an example or documentation about how to retrive a table of records from a Stored Procedure ??
Thanks

Try:
CREATE OR REPLACE TYPE scott.MYRECORDTYPE as object
(a int, b varchar2(40), c date, d number(10));
CREATE OR REPLACE TYPE scott.MYTABLETYPE is table of myrecordtype;
CREATE OR REPLACE PACKAGE BODY scott.MYPACKAGE
as
type number_collection is table of number(38) index by binary_integer;
type varchar2_collection is table of varchar2(4000) index by binary_integer;
type date_collection is table of date index by binary_integer;
g_data myTableType;
empno_col number_collection;
ename_col varchar2_collection;
hiredate_col date_collection;
mgr_col number_collection;
function my_function return myTableType
is
begin
select empno, ename, hiredate, mgr
bulk collect into empno_col, ename_col, hiredate_col, mgr_col
from emp
order by empno; -- Get some data
g_data := myTableType(); -- Initialize
for i in empno_col.first .. empno_col.last loop
g_data.extend; -- Write something in the array
g_data(i) := myRecordtype(empno_col(i), ename_col(i), hiredate_col(i), mgr_col(i));
end loop;
return g_data;
end;
end;
-- Demonstration-View
CREATE OR REPLACE VIEW scott.myview
AS
select a,b,c,d
from table(cast(myPackage.my_function() as mytabletype));

How to get large no of records from adf table

Hi All,
I'm working on adf.I'm using jdeveloper 11.1.1.5 version.In my adf application i have 1000 records in my adf table.I want to get the 500 selected records from that table at a time.But im not able to get huge number of records.How can i get the records from adf table.Please give me ur valuable suggestions.
Thanks!

Hi.
for large record check the oficial doc.
http://docs.oracle.com/cd/E24382_01/web.1112/e16182/bcadvvo.htm#CEGDBJEJ
PAGE_RANGING is the best option for large tables.
and these maybe will help you
Re: Performance scrolling large ADF tables
Re: Expert opinion needed: Best practices to handle huge rowsets on UI

Delete record from the form and from the database

hi,
i want delete record from the form and the database ,but the record is only delete from the from !!!
this is my code :
if //condition then
delete_record;
commit;
end if ;
Any solutions ??
thnx

You have unique key field(s) on the table you are trying to insert which actually restricts you from inserting the same value again.
When you are deleting the record and issue commit there is a record to be inserted in the table which is a duplicate that's why you are getting this unique error.
As oracle is not able to insert your commit fails and stops your deletion of record from table

Delete records from tableA which are not in tableB

Table A contains milions of records which is the best way to delete records from tableA which are not in tableB
delete from tableA where empno not in (select empno from tableb)
or
delete from tableA where empno not exists (select empno from tableb
where b.empno=a.empno)
any help

Hi
If you can do this, do with this:
create table tableC
as select a.*
from tableA a,
(select empno from tableA
minus
select empno from tableB) b
where a.empno = b.empno;
drop table tableA;
rename table tableC to tableA;
Ott Karesz
http://www.trendo-kft.hu

Del records from flat files

Hi all,
I have a text file abc.txt, i want to delete records from a table take the input from the txt file from linux operating. lets see
My table table structure is
desc unix_logins
Name Null? Type
UNIX_LOGIN NOT NULL VARCHAR2(7)
NAME_LAST VARCHAR2(20)
NAME_FIRST VARCHAR2(20)
NAME_MI VARCHAR2(1)
LOGIN_CONTACT_TN VARCHAR2(12)
and abc.txt
UNIX_LOGIN
abc
bdf
fyz
rmt
lik
My Oracle is installed in Linux plat form. Can please suggest me how can do it.

>
I have a text file abc.txt, i want to delete records from a table take the input from the txt file from linux operating.
>
It's not clear what you mean. Do you want to delete records from a table if those records exist in a txt file?
You can create an EXTERNAL TABLE on the text file and then use that 'table' in a query that deletes records from your table.
DELETE FROM myTable where LAST_NAME in (SELECT NAME_LAST from myExternalTable); See this Oracle-base example of creating an external table on a text file
http://www.oracle-base.com/articles/9i/external-tables-9i.php

Recording from casse

Similar Messages

Maybe you are looking for