Recording from external source

I am brand new to Mac / switched from pc a week ago. not able to figure out some things yet and havent found answers in support. mostly on the basic stuff. like I was able to record audio from a lp turntable on a pc. it looks like there is no recording program built in to the iMac, or am I wrong? will I have to purchase some type of software to record from external record or tape source?

Sorry some heavy-handed moderation has been going on here. I accidently duplicated my post when I edited it to say 'Welcome to Apple Discussions'. Then I asked the mods to remove the first post above and they've gone and deleted my second post and yours; I am sorry about that. 
You posed a question about Real Instruments in the absent post. A Real Instrument can be a microphone input or any device that connects to the Audio-In port (or a USB/Firewire Audio device).
Hope that helps.
mrtotes

Similar Messages

  • Trying to record from external source, no region created...

    Hey everybody. Trying to record into Logic. My aim is to record sets from Ableton but at the moment I am just trying with a simple microphone. I have set my audio record path to a folder on the desktop. I have created an audio track and chosen its input source: stereo input 1 & 2. The track is armed for recording and there is a good level showing. My soundcard is outboard. A Mackie d.2 Firewire Mixer. When I hit record I get the red display along the timeline of the arrange window, the playhead moves but no region is created. When I look in the Audio window there is no file showing there either. When making tracks ordinarily with Logic I never have any problems bouncing stuff and the audio interface is always recognised. The same applies when Ableton is working in rewire. I get a signal easily enough as its routed via my mixer same as with the microphone. Funnily enough I can record into Garageband no problem but as I have Logic its about time I got to the bottom of this. I bet its something really simple I have overlooked. Anyone got any ideas?
    Powerbook G4   Mac OS X (10.4.10)  

    Just to add some further info... what it does seem to be recording are midi input messages when I slide the crossfader of my mixer. A region is created but when I click on it the matrix edit window opens... no audio in sight. What am I doing wrong?...

  • How can I monitor audio that I am recording from external source?

    I am recording music from LP records (vinyl) and need to be able to listen to it while recording. It is impossible to know when a track is finished if you can't hear the music from either internal speakers or headset. Is there any way I can passthrough the sound from line in to internal speakers or headset?

    Look at LineIn for audio playthru.

  • How to merge key field from external source system with SAP R/3 master

    Hi,
    In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
    This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
    To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
    0GL_ACCOUNT      Short Description     Source System
    100                                   D1                          R/3
    200                                   D2                          R/3
    300                                   D3                          R/3
    400                                   D4                          R/3
    500                                   D5                          R/3
    Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW  ZDSO_FI-
    GL_file      Key Figure1
    400          789
    200          567
    Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
    0GL_ACCOUNT      Short Description     Source System
    400
    200
    100                                   D1                          R/3
    200                                   D2                          R/3
    300                                   D3                          R/3
    400                                   D4                          R/3
    500                                   D5                          R/3
    So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
    Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
    Thanks in advance.
    Nirmit

    Better post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.

  • I can't paste text from external sources into Photoshop CC 2014.

    Hello everyone,
    Since a few days I'm not able to paste texts from external sources into Photoshop CC 2014.
    I never have problems with Photoshop CC before.
    I have the new iOS Yosemite installed in my macbook.
    It's really frustrating, can someone help please?

    I have basically the same setup, except on a Mac Mini. I am unable to reproduce your problem. Double check that you are copying the original text in the first place, and then make sure you are pasting into a text layer as you cannot paste into a regular Photoshop layer -- nothing will happen. Create a text layer by clicking on a regular layer with the text tool, the T in the tool box. The new layer will show up in the layers panel identified by the first line of the text.

  • Problem recording from external l

    I'm new here, I have a SB Audigy 2ZS, and I want to record from external line to my PC.
    I use a external mixer to connect cassette, mics, long plays to the PC, and I connect them to SB Audigy from "Input line". And I use the mixer to amplify the PC. When I want to record the "surround Mixer" software thas not permit select a simple record input, it mixer all lines (wave, CD, CD digital, input line).
    That produce a terrible feedback. Are there some way to record only from input line, without switch line by line?
    Thanks
    Mduque

    Just click on the speaker icon under the volume controls in the mixer. Having said that it is not really necessary as I am unable to detect any hum by leaving them open. I suspect you may need to reinstall the card.

  • Purchase of variant configuration material from external source

    Hi,
    I am working with variant configuration scenario , Here some material procured from external source and per characteristics requirements , these characteristics have varied price , these price should be maintain at condition level .
    The Material purchases from external source its price according to characteristic select.
    Pl helps me how these scenario resolve.

    H Rajesh,
    1.Create another New characteristic called ZPrice .Give the description and go directly to Addnl Data Tab.Here in the table name Enter "MMCOM" and in the Field Name Enter "VKOND" at CT04 & save .
    2.Now Goto CT04 in change mode, for Zprice Go to values tab and select RED &.Goto Extras-> Object Dependencies->Editor and then select Procedure & define condition.
    3. Goto Inforecord Choose Extras ->Variant conditions.
    Enter a variant key. Choose the desired condition type and specify the period during which the discounts and surcharges are to apply.
    Enter the amount and save.
    For More help please Refer Below SAP link
    [Variant Configuration |http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm]
    Regards
    Pradeep
    Edited by: Pradeep Kumar on Mar 4, 2008 10:36 AM
    Edited by: Pradeep Kumar on Mar 4, 2008 10:37 AM

  • How to import user profiles from external sources(other than AD) into SharePoint

    Hi,
    I want to import user profiles from external sources other than AD.
    Badri

    You have to use BCS for importing the profiles,
    Check the following link with explanations
    http://msdn.microsoft.com/en-us/magazine/ee819133.aspx
    Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

  • Recording from outside source

    Tring to record from my line in off of a dvd player, can here the music coming through, but when I goto record it and play it back I get no sound. I've tried musicmatch and Neromix, both set up to record from line in. Any ideas? Thanks

    Hi,
    Did you set the input "V" to the line you want to record from?
    As you need to select the source for recording....
    To get there, click the little-speaker-right-below 2 times, then you get the mixer.....
    Now goto options->properties, select the recording and press ok (make sure you have selected all the lines you need to see in the mixer)
    Then you have the recording mixer, now select the input you want to use....
    I hope this works for you....

  • FF 3.6.12 will not open links from external sources (Outlook, Dreamweaver, Digsby, etc)

    I have just upgraded to Firefox 3.6.12 and links clicked in an external source will not open in Firefox.
    Firefox is set as my default program for web browsing. I have tried to open links from Outlook, Dreamweaver, Digsby, and other programs.

    I have the same issue, opening links from external programs like Word or Thunderbird does not work. This used to work before the update to 3.6.12

  • How to get data from external source

    Hi experts,
       I want to get data from a different source e.g. from oracle. How can i get the data in BW??
    Sam

    Hi Samir
    there are different interfaces are available according to the source system.
    For Oracle source system you can use DB connect interface.
    you can extract data from several data sources to BI
    File Interface:: Using this interface, you can access files in ASCII format or CSV format
    DB Connect :: You use DB Connect to open other database connections in addition to the default connection and use these connections to transfer data from tables or views into a BI system.
    UD Connect :: UD Connect (Universal Data Connect) uses the Application Server J2EE connectivity to enable the reporting and analysis of both SAP and non-SAP data. Using UD Connect, you can access all relational and multidimensional data sources. UD Connect transfers the data as flat data.
    BI Service API ::
    Web Service for Staging ::You use the Web service to write the data from the source into the PSA. The transfer of data is controlled externally, without placing demand on BI.
    You can use this interface in conjunction with real-time data acquisition.
    Please assign points if this info helps.
    Regards
    Vivek..

  • Querying data from External Source from FORMS

    I have a form that is built based on Oracle tables.
    But I need to get data from external Data source from within Forms and use it fro validation.
    I need to execute a Select statement via ODBC from within Forms procedures. This is going to a SQL Server DB to get some information.
    Any thoughts?
    Thanks

    Hi
    What version of forms do you use? If you use forms 6i, take a look at the EXEC_SQL package. You can access oracle databases and ODBC databases (using OCA) independently of the main database connection -- well, I never tried but that is what the documentation says.
    I am not sure about version 9i... the package is there, but I could not find anything in the help about it (what is not a good sign...)
    hth
    Luis Cabral

  • How to view record from java source table

    hi,
    i had created a table as
    CREATE JAVA SOURCE NAMED "Hello" AS
    public class Hello {
    public static String hello() {
    return "Hello World"; } };
    also it compiled but i dont've idea to view the record from it
    can u help me

    Please check the following script --
    create or replace and resolve java source named "Hello"
    as
    import java.io.*;
    import java.sql.*;
    import java.math.*;
    import oracle.sql.*;
    import oracle.jdbc.driver.*;
    public class Hello extends Object
        public static String Display()
        throws IOException
            return "Hello World";
    create or replace procedure Hello(v_str  out varchar2)
    is
       language java
       name 'Hello.Display(java.lang.String) return String';
    create or replace procedure HDisplay
    is
    x  varchar2(400);
    begin
      Hello(x);
      dbms_output.put_line('String is: '||x);
    end;And, from sql prompt --
    exec HDisplay;N.B.: Not Tested...
    Regards.
    Satyaki De.
    Message was edited by:
    Satyaki_De

  • Cache/copy Bitmaps loaded from external source?

    I'm working on a chat application that retreives user profile icons from remote sources (e.g. Blogger, Yahoo, Gravatar, etc). Easy to get the images in a Loader and display them.
    The problem is that a single thread could have hundreds of records, but probably only 10-20 active commenters. In a standard browser, each <img...> link after the first one is cached, so you only hit the source site once. Is there any way to cache/store/copy those images within Flash to avoid requesting the same image over and over?
    I can do it in the Local sandbox by accessing the BitmapData of the loader content and cloning a new bitmap for subsequent instances of the same request URL, but of course once the application moves to the Internet the security system requires a Policy file allowing bitmap access. I doubt that I can get Yahoo to add one for me. I don't need to manipulate the bitmap at all, just copy it. Or reference it as content from multiple Sprites, or something along that line. Once I've downloaded the image once, I don't see why the security system would prevent me from displaying it unchanged as many times on the page as needed.
    If this can't be done in AS3, perhaps it would be a good feature to add in the next release? Remote image caching is pretty well accepted in other platforms.

    I put  trace on the image URLs, and they always showed HTTP Status = 200 - they were loading every time. In any case, I came up with an easy workaround. I out a php script on my hosting server that fetches the image, then use that as the URL for the loader object. Voila, no security violation because the php is in the same domain as the swf. Cut down load time by at least a factor of 5.
    Only problem is, the loader always gets a 200 status on the php script, eve though I'm setting an Http header to send a 404 (the same URL from a browser gets the 404 response.) That generates an Unkown File Type error in my SWF so I have to trap that rather than the http status. It works, except I can't differentiate b/t a non-existant image and a server or connecion error. Or at least, I can't do it without a lot more code

  • Geturl("from external source")

    Hello,
    I'm trying to figure out how I can get the url from an
    external source? I want to make a file that holds the urls and when
    the item is called it pulls the url from the file. Is this
    possible?
    Thanks,
    Ryan

    Ciao
    I do not think is possible right now but this is a great
    suggestion for FL
    Alessandro

Maybe you are looking for