Recording from guitar to computer

i'm new to logic, i just wanted to know what is the best way to connect your guitar to computer. What USB or any other device could you use to record with good quality. thanks.

You should look for a decent audio interface (firewire or usb). There are several brands available. Depends on your budget of course. I've got the Presonus Firepod and used it daily. It features clean preamps and is good value for money.

Similar Messages

Recording with guitar to computer through USB X-Fi

I am having a problem trying to record with my guitar through my USB X-Fi 5.. I am using a program called Audacity to capture the recording. I have my guitar hooked up to a Line 6 POD 2.0 effects device that has a left/right output. Then I plugged the /8th male end running from that into the Line-In port on the USB X-Fi 5. and then to my computer via USB. But I cannot hear my guitar when playing and it will not capture the recording. I basically bought the USB X-Fi 5. because when recording with my guitar I thought that my laptops sound card was making the recording of low quality. So I got the USB X-Fi 5. to help that. Any help would be greatly appreciated!Message Edited by BulletFMV on 2-06-2008 03:42 PMMessage Edited by BulletFMV on 2-06-2008 03:43 PM

That USB audio interface isn't any better for recording from onboard sound. You should have bought least the Creative E-MU 0202 USB (if you prefer Creative products/USB audio interfaces).
With your current setup, instead of using Audacity, you could try, say, Cockos Reaper + Asio4All driver.
- http://www.reaper.fm/
- http://www.asio4all.com
In any case, remember also read the software documentation as well ... all needed information for recording task is normally guided there in user manual(s).
jutapa

Audio Recording, from Mic to computer

Good Peoples,
I thought that plugging a mic into the mini port on the computer would work for using and external mic. I switched from internal to external in under system preferences but nothing is picked up. The internal mic works. Anyone know about this?
Much Thanks,
Jackson

I had a similar problem with an external microphone that didn't need power supply. I checked the source on the sound of the system preferences, and whenever I had the microphone attached, no sound was being input, only sound picked up when I had the internal microphone selected.
This summer for a class project, I thought it was picking up sound while I was recording a movie, using iSight, and when i finished, all i had was the video with no audio. Then I had to re-do the class project.
Did your problem ever get resolved? If so, what did you end up doing to resolve it?

Transfer audio recording from quickvoice to computer

I need to transfer some conference recordings done in Quickvoice on my iPhone4 to my computer & do not see the info for assistance.

I had a similar problem with an external microphone that didn't need power supply. I checked the source on the sound of the system preferences, and whenever I had the microphone attached, no sound was being input, only sound picked up when I had the internal microphone selected.
This summer for a class project, I thought it was picking up sound while I was recording a movie, using iSight, and when i finished, all i had was the video with no audio. Then I had to re-do the class project.
Did your problem ever get resolved? If so, what did you end up doing to resolve it?

I can't get a newer GB recording from a friends computer to play on my GB '09--How do I add tracks?

How do I open a more recent friend's GB 'll recording on my older GB '09? Do I have to buy the new GB version?

Do I have to buy the new GB version?
If you want to be able to edit GB '11 projects, yes, you will have to buy the new version. GB '11 can open GB '09 projects, but not vice versa, sorry.
You will have to update your Mac OS X as well, the most recent GB '11 version (GarageBand 6.0.5) requires Mac OS X 10.6.8 or later.
Regards
Léonie

HT1202 I have an ipod classic loaded with songs from my old computer that wre put on the ipod from cd's. can I transfer the songs from my ipod to the new computer or do I have to put the songs back in my library by re-recording them one disc at a time?

I have an ipod classic loaded with songs from my old computer that were put on my library from cd's. can I transfer those songs onto my new computer from my ipod or do I need to re-record them to my library on disc at a time?

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not. My question are: Why does my computer think it's blank? And how can I copy a DVD?

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, Sheila

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

While recording a guitar do not record the output from other tracks

Hi all,
I'm an audition/recording newbie. I have Audition CC. I have recorded one guitar track. and now I'd like to record another one. The problem is that when I try to record it the output from the other one gets recorded as well. I do want to hear the output from the first track while recording track 2 but I want only to record my guitar playing in track 2.
Thank you.

The basic problem here is not actually caused by Audition, but by your sound device mixer, which appears to be letting you record everything you hear - so that will be the guitar part you are playing, and also the replayed tracks that you've already recorded. In Windows, the fix for this is generally to make sure that the recording source is set to be just the input you are using, and not 'what you hear' or whatever it is on your device. The playback part of the mixer should let you monitor both the wav playback and your source, which is what you need to be doing - it's only the record settings you need to look at.
If you are using a Mac though, I can't help you because I don't know anything about how they work from that POV, but I'd imagine that it must be similar.

Only records from computer speakers

Hi, I'm new at this program and am tryting to get up and running. Don't know much about Logic pro yet. I am trying to record something but my recording is only being captured from the computers speakers and not from the midi keyboard i have plugged directly into my computer? how do I get the computer to acknowledge my midi keyboard and stop recording from the actual sound of the piano in the room. Sorry if it's a stupid question..

1sngwrtr wrote:
Hi, I'm new at this program and am tryting to get up and running. Don't know much about Logic pro yet. I am trying to record something but my recording is only being captured from the computers speakers and not from the midi keyboard i have plugged directly into my computer? how do I get the computer to acknowledge my midi keyboard and stop recording from the actual sound of the piano in the room. Sorry if it's a stupid question..
Logic is a professional level program, it doesn't do anything for you, nothing is setup ready for the user to start recording, (like Garageband tries to do). You really need to read the manuals and online help to become aquainted with the program at a deeper level. I'm not trying to be rude but it's almost impossible to answer your questions with the little information you've given coupled with your lack of "Logic" knowledge. At this point reading the Getting Started manual and using Logic the online help is a must. You have to do some work to use this program.
No one knows whether you're trying to record MIDI, or Audio tracks or even how you have the keyboard hooked up.

Powser Shell Script to Purge Computer Records from SCCM

Hello!
I have built a collection in Configuration Manager to bring in a list of computers that have duplicate names. Here is the query that I am using.
select R.ResourceID,R.ResourceType,R.Name,R.SMSUniqueIdentifier,R.ResourceDomainORWorkgroup,R.Client from SMS_R_System as r full join
SMS_R_System as s1 on s1.ResourceId = r.ResourceId full join SMS_R_System as s2 on s2.Name = s1.Name where s1.Name = s2.Name and s1.ResourceId != s2.ResourceId
I am building a PowerShell Script to obtain the names of the computer resources stored in the above SCCM 2012 collection and place them in a variable. Next,
I want to obtain the computer resources (e.g., ddr records) and store them in a 2ed variable using the first variable to pipe in the data. I am using a “ForEach” looping construct to accomplish this. Lastly, I want to purge the computers records from the Configuration
Manager database that are stored in the second variable which came from the computers names of the specified SCCM collection. I am attempting to use this line of code within my loop to purge the computer records from SCCM:
$compObject.psbase.syncroot | % { $_.psbase.delete()
Here is a
blog I found suggesting this line of code.
What I have discovered is rather interesting. My script works as intended, but even though the correct records ARE
being purged. The above line of code is returning an error.
You cannot call a method on a null-valued expression.
At line:18 char:35 + $compObject.psbase.syncroot | % { $_.psbase.delete() }
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
I have a few questions:
Does anyone know why this is occurring?
Is there a different approach or code I should be using instead to purge the collected data?
Here is my full script:
#// required parameters
$SCCMServer
= "MySiteServer"
$sitename
= "PS1"
$collectionID
= "PS1009c8"
#// Obtain collection members from $collectionID
$SMSClients
= Get-WmiObject
-Query "SELECT * FROM SMS_FullCollectionMembership WHERE CollectionID='$collectionID' order by name"
-ComputerName $SCCMServer
-Namespace "ROOT\SMS\site_$sitename"
#//looping construct to loop through all the colection members
ForEach ($SMSclient
in $SMSclients) {
#// Loads computer records one at a time into $compobject variable using a ForEachloop to be deleted
$compObject
= get-wmiobject
-query "select * from SMS_R_SYSTEM WHERE Name='$($smsclient.name)'"
-computername $SCCMServer
-namespace "ROOT\SMS\site_$sitename"
#// Delete’s computer objects one at a time in $compObject variable from CM12 database
$compObject.psbase.syncroot
| % {
$_.psbase.delete() }
--Tony

Daniel
Have you ever used Orchestrator to kick off your Powershell scripts? I am using System Center 2012 R2 Orchestrator, and trying to use the "Run .Net Script" action to launch my Powershell code, but the process is failing. When I run the code
from within PowerShell and RunBook Tester the code executes as it should. When I run it from the RunBook I receive this error:
Exception calling "Delete" with "0" argument(s): "Generic failure "
Just curious if you had any thoughts why my code was blowing up in an Orchestrator RunBook when it works fine within PowerShell? My full code is below.
#// required parameters
$SCCMServer = "MySiteServer"
$sitename = "PS1"
$collectionID = "PS1009c8"
#// Obtain collection members from $collectionID
$SMSClients = Get-WmiObject -Query "SELECT * FROM SMS_FullCollectionMembership WHERE CollectionID='$collectionID' order by name" -ComputerName $SCCMServer -Namespace "ROOT\SMS\site_$sitename"
#//looping construct to loop through all the colection members
ForEach ($SMSclient in $SMSclients) {
#// Obtains and deletes the SCCM computer records one at a time using a ForEachloop
Get-WmiObject -query "select * from SMS_R_SYSTEM WHERE Name='$($smsclient.name)'" -computername $SCCMServer -namespace "ROOT\SMS\site_$sitename" |
ForEach-Object { $_.Delete() }

I have just bought a new computer with Windows 7 and I need to transfer all my I tunes records from my Windows Xp computer. How do I do this without losing any of my songs?

I have just bought a Compaq Desktop Computer with Windows 7 but I do not want to set itup until I know how to transfer my 1800 songs from my ITUNES library on this old Windows XP Pro to a new set up on my Compaq. If anybody could please help me in simple language ( I am only a user with very little knowledge and nil jargon) I should be most grateful. Is there anybody out there to solve my dilemma?

Did you purchase all your music from iTunes, or import it from CDs?
If you've purchased all your music from iTunes, it now keeps track of your purchased items. All you would need to do is download iTunes on your new computer and log in with your Apple ID (the account you set up on iTunes). Then on the right hand side (in the bar) near the top there is a section that says "Purchased" *NEW*. There it will show you all your music and give you an option to re-download it on to your new computer. *You will need to authorize the new computer and deactivate the old one if you're not using it anymore*
If you imported your songs (or otherwise obtained), my best suggestion to you is to get a USB stick/thumb drive/external hard drive and copy all your music from your old computer on to the USB stick. (You can do it with a network, but that's assuming you have one set up already in your home).
To do that, you need to go to Music > iTunes > iTunes Library (folder) (this may not be exact as I use a Mac. I'm going from memory here). Right-click the folder and click "Copy". Go to My Computer and click on whatever drive is your external/USB stick (would be like E:\ or something). Double click on that, then right click in the next window and click Paste. This will copy your entire iTunes Library on to the separate hard drive.
Once it is finished (and with 1800 songs it will take a while, so go read a book or something), properly eject the external hard drive and plug it in to your new computer. Open Music > iTunes and do the same process to copy and paste the folder into there.
Once that is finished, open iTunes and all your music should be there. If not, go File > Import Folder and then find your iTunes Music folder and click it, then click Import and it will import them into iTunes for you.
Hope this helps and is clear enough for you. If you have any other questions, please ask and I'll do my best

Problem with Adobe Audition 2.0 and recording from a 1212m.

I bought a brand new machine and have be configuring it all week. Everything has been going well, except getting Adobe Audition 2.0 (the new version) to “hear” sound from the 1212m.
The intel 975 motherboard has an integrated HD sound system already on board and I have been able to get adobe audition to recognize it and record from it. This is what I have Windows XP Pro set to as my default sound card.
I installed the 1212m and I have gotten my monitors to work by using the XLR jacks on the monitors to the ¼ inch jacks on the 1212m using a VST (NI’s Kontakt 2) as the audio source. So it works.
What I can’t seem to get to work is getting Adobe Audition to “hear” the sound coming from the 1212m.
Patchmix seems to be working ok. The audio bars jump each time I hit a note on the keyboard.
I have configured Audition by going to Audio Hardware Setup and setting it to EMU ASIO and tried every combination of INPUT and OUTPUT, but when I hit the Record button in Audition it just flat lines..
I was hoping that once the audio made it from the VST though the 1212m and out to the speakers, that getting Audition to record it would be easy, but that hasn’t been the case.
The Intel 955 Extreme Edition and the 975 motherboard are brand new and I’m worried that being on the bleeding edge of technology, that one of the drivers isn’t working correctly and causing me hours of debugging a problem that is unworkable from my end.
Hopefully the problem is just some small stupid thing that I’m doing or failing to do (like normal).
Any ideas would be helpful.
thanks

I'm just saving it into a file in "My documents" on the internal hard drive. It's a computer in the office which has been used my other people before me and I have my own file which I was always able to save Adobe sound files into before, so I don't think it's anything to do with me not being allowed or read-only.
I've also been trying to save it onto USB hard drives. This works when I save it under a different name, but not when I'm just trying to update a file i've been working on. Basically I have to create a new file everytime I add something, so like "myaudit1", "myaudit2", "myaudit3" etc etc, even though it's the same piece of work just updated.
Hope that makes sense!

HT5772 How do you delete a movie from a local computer without deleting it from the library? This should be such a simple procedure, but it's not. And while we're at it, why is iTunes NOT one of the dropdown product choices?

All Apple support says about deleting movies from a computer is that you "should" be able to re-download it if you live in the right area. Well, I'm in the U.S.A. and just deleted one of the movie extra features exactly as described in the support directions. According to Apple I should be able to re-download this from the cloud at any time, but now I no longer even see the title listed. That's why I wanted to test their support statements with a Movie Extra instedad of a real movie. This should be the simplest of tasks to manage, yet they make it extremely difficult. Why? I own the movies and I want them to stay in my iTunes library basically forever. Makes sense, right? But, I only have so much room on my laptop to store movies that I want to have with me on long trips, etc. So if I only have the space to store 3 or 4 movies on the disk, shouldn't I have the ability to every once in a while delete one of those movies from my local computer ONLY, NOT my library, so that I can download a different movie? Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library. So why does support say you can download again any time from the cloud then? The worse part is, the calamity doesnt stop there. Wait until you see the message you actually get once you say that yes, you do want to delete the movie (but only because you assume that you really can download it again sometime). Here is the exact 2 messages you get from Apple, in the same popup box.
Do you want to move the selected movie to the Recycle Bin, or keep it in the iTunes Media Folder?
Only files in the iTunes Media Folder will be moved to the Recycle Bin.
[Cancel] [Move to the Recycle Bin] [Keep File]
Is that the most confusing popup or what? Who develops this kind of software?!?!?!
I have tried it both ways and the only difference is that the file shows up in the Recycle Bin or doesn't. But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud. Better hey, if I clicked "Keep File", where is it? I can't see it anywhere, so where is it kept and what can I actually do with it?
I have to be honest, I love my iPhone and some of the neat features, but when it comes to iTunes, I have never seen a more difficult piece of software to use in my life... and I'm a software developer. Your Support documentation is actually more confusing than the softwae itself, it's almost as if you don't want people to use the software, just simply buy stuff and listen/watch it, but nothing else. Seriously, this is the most cumbersome, unfriendly piece of software I've ever seen. What does it say about Apple iTunes when everyone has to google solutions for how to do something rather than using Apple support documentation.
Seriously disappointed in Apple iTunes and it's never really gotten any better over time. This is one of the primary reasons I have never moved all of my recording studios and office operations over to an Apple platform. Hardware and phones are awesome, but your software is either grossly incompetent or intentionally designed to make it all but impossible to use. Either way, it's worthless to me. We're talking about software that does nothing else but manage media that I already own on multiple devices. That should be one of the simplest things in the world to do. Sad... very sad.
While we're at it.... why isn't iTunes listed on the product dropdown below? Maybe it's not even considered a product, which would explain it's goofiness I guess.

I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/

Ipod Nano 5th GenerationWindows xp. My nano no longer opens automatically with file options menu. Trying to import priceless videos of my daughter from ipod to computer so I run it and get these results: My computer/ipod/dcim/000apple and 75 IMG.DAT

Nano 5th GenerationWindows xp.
My nano no longer opens automatically with file options menu when I connect it to my lap top. Trying to import priceless videos of my daughter from ipod to computer, However, when I run it I get these results: I click onto My computer/ipod/dcim/000apple and 75 IMG.DAT files come up. Now I am almost sure those files shouldnt be on there. If my memory serves me corrrectly the dcim folder is where one should be able to find video recording made with their iopd?If there is a way to import these videos without having to reset my ipod and lose precious videos please please let me know? HELLLLLLP

Try: http://discussions.apple.com/thread.jspa?threadID=743515&tstart=15

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

Recording from guitar to computer

Similar Messages

Maybe you are looking for