Recording from minidisc to creative player with an x

I tried recording from my?minidisc onto my computer with the x-fi card, through the line-in and mic jacks. When I stop recording and turn off the source, I still have the record volume showing some input even though nothing is on. I?even?tried disconnecting the minidisc from the input jack but the player is still showing some input. This is causing my recording to have a steady interrupting noise every quarter of a second or so. Any ideas where to search for this mysterious input or how to get around this problem.Louis?

If you are using the Digital input (SPDIF) to record from MiniDisc then you are correct that it is 44.1Khz, but are you ensuring that the SPDIF input is set as the master clock? You will need to ensure that is so whilst you record digitally from it.
I can't fanthom why you might be have a problem recording from the analogue outs though. The phasing sound you describe sounds like you are hearing the original sound plus the slightly delayed sound due to software monitoring perhaps?

Similar Messages

  • Recording from minidisc to Logic pro 7 via an fa-66

    Hi, I'm having issues recording from a sony minidisc deck through my edirol fa-66 to my macbook. I've tried the various anologue inputs on the fa66, the 1/4 jacks and the RCA inputs on the back. With the anologue it's sounds fine until I arm the track to record, then it starts jumping and phasing. Same with the optical input, I press the "Digital sync" on the fa-66, without the "R" record armed it sounds fine, when I arm it the sound starts jumping and a message comes up "saying sample rate not recognised- Sample rate 3674"
    The minidisc was recorded from a PA at I assume the satndard rate for mnidisc players of 4100Khz.

    If you are using the Digital input (SPDIF) to record from MiniDisc then you are correct that it is 44.1Khz, but are you ensuring that the SPDIF input is set as the master clock? You will need to ensure that is so whilst you record digitally from it.
    I can't fanthom why you might be have a problem recording from the analogue outs though. The phasing sound you describe sounds like you are hearing the original sound plus the slightly delayed sound due to software monitoring perhaps?

  • Software to record from minidisc

    H friends,
    Do you have any experience or recommendation for a software which enables recording into I Tunes
    from other sources than CD, i.e. from a minisidc player..? I would also be very intersted in a software for "exact copy" recording from CD...I think there is a similar program available for windows based computer, called EAC "exact audio copy"...Thanks for your thoughts and input !
    Cheers from Singapore
    Thomas

    Hi.
    There are lots of applications that can record external sources like your md-player. Try GarageBand or Audacity. Because you posted in Soundtrack category i asume you have this application. Soundtrack can record external sources too and should be your first choice. Importing to iTunes is easy, just save the recorded songs separatly and then drop them on iTunes. Maybe you want to convert them to AAC or MP3 for saving discspace.
    I don't know what you mean with "exact copy of a cd" because iTunes import the files from cds like they are and you have the choice to compress them to aac/mp.3/etc. if you want to. There is no need to use an other application for doing that.
    Regards
    Alexander

  • Insert record from one table to another with help of cursor

    Plz help!!!
    tables are - 1. country( country_id pk, country_name, region_id)
    2. a( country_id , country_name, region_id)
    table a data are
    1 a 1
    2 b 2
    3 c 3
    null d 4
    5 e 5
    6 f 6
    7 g 7
    insert record from table a to country table with help of cursor, insert all not null records.
    this procedure does not give correct result
    create or replace
    procedure amit as
    cursor c1 is select * from a;
    rw a%rowtype;
    begin
    open c1;
    fetch c1 into rw;
    while(c1%found)
    loop
    insert into countries values(rw.country_id,rw.country_name,rw.region_id);
    commit;
    fetch c1 into rw;
    if rw.country_id is null then
    fetch c1 into rw;
    end if;
    end loop;
    close c1;
    exception
    when others then
    dbms_output.put_line('exception name= '||rw.country_name);
    end;

    bluefrog wrote:
    You don't need cursor at all;
    create or replace procedure amit as
    begin
    insert into countries (Country_ID, Country_Name, Region_ID)
    (select a.Country_ID
    ,a.Country_Name
    ,a.Region_ID
    from a
    dbms_output.put_line('Rows inserted : ' || sql%rowcount);
    commit;
    end;
    Bluefrog you missed where clause. :)
       insert into countries (Country_ID, Country_Name, Region_ID)
       (select a.Country_ID
              ,a.Country_Name
              ,a.Region_ID
        from a
        where country_id is not null
    );

  • Just need the record from the right (many) table with the max value for the Record on the left (one) side table

    SELECT
      ADHOC.ATS_ESH.Entry_Num
      ,ADHOC.ATS_ESH.Importer
      ,ADHOC.ATS_ESH.Version AS [ATS_ESH Version]
      ,ADHOC.ATS_ESL.Version AS [ATS_ESL Version]
    FROM
      ADHOC.ATS_ESH
      INNER JOIN ADHOC.ATS_ESL
        ON ADHOC.ATS_ESH.Customs_Entry_Num = ADHOC.ATS_ESL.Customs_Entry_Num
    I just need to see the MAXIMUM version number in the ESL table for each Entry_Num in the ESH table. ESH is the one side, ESL is the MANY side.

    Do you understand what this query is doing? Did you check the blogs I pointed you to?
    The query I provided gets the latest ESL version for each custom number. So, if max ESL version is higher than ESH version, it's just a coincidence. If you only want to see rows where versions do not match, just add an extra where condition, e.g.
    SELECT * FROM cte WHERE Rn = 1
    AND  [ATS_ESH
    Version] <>  [ATS_ESL
    Version]
    BTW, what is the type of these version
    columns and what kind of data in them? If they are character columns, sorting them in DESC order will not necessary return the latest version. Can you show some samples of the data in these two columns?
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

  • Anyone ever try recording from PS3  to Mac using EyeTVHD  ?

    Hello,
    I am connecting my PS3 with a multi AV cable to the back of my PS3 and connecting the blue green red cables to the EyeTVHD but I always get a NO SIGNAL message on the Mac.
    Has anyone tried this and got it to work?
    Is it possible to record games, regular dvds, and bluray using this setup ?
    Which are possible and which are not ?
    I can record from my regular dvd player ( but picture only - no sound )
    The back of the dvd player has a digital video out but I believe EyeTVHD only accepts analog input. So not sure how to get sound if that is the case.
    If anyone can help with the PS3 connections or the dvd player sound - much thanks.
    Is the only way to record bluray to purchase a bluray writer and would the bluray writer work with the PS3 using EYETVHD with the Mac - man it's really getting confusing now.
    thanks if anyone can lead me out of the wilderness here

    I am connecting my PS3 with a multi AV cable to the back of my PS3 and connecting the blue green red cables to the EyeTVHD but I always get a NO SIGNAL message on the Mac.
    That's probably because, as you describe your setup, nothing is connected to the Mac.

  • DTP does not fetch all records from Source, fetches only records in First Data Package.

    Fellas,
    I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
    The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
    The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
    But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
    It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
    Have you faced a similar situation in any of your systems?  What is the cause?  How can this be fixed?
    Thanks in advance for your help.
    Cheers
    Shiva

    Hello Raman & KV,
    Thanks for your Suggestions.
    Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
    So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
    Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
    Cheers
    Shiva

  • Creative mp3/mp4 player with video aut conex

    Hello, first of all, sorry for my English... but I?m from Spain. I visited your creative website, and I see most of the mp3/4 players of for page. The new Zen with 2,5" screen is increible. I searching for a player with the following specifications:?- Audio and video player. - At least 2,5" screen. - Ampliable memory by any memory card format. - And the most important for me, a external audio/video conexion, for conect it with a TV. I see the specifications of the Zen vision W. And all I need is in it. But the Zen vision W is to big for me, I?m searching something more portable, like dimensions of new Zen.
    With product, have all of these specifications?Thanks in advance.

    Hello Philipp
    Okay, that worked, thanx!! :)
    And well, not having HTML5 video playback is not a big issue I think. I mean, till now I only encountered low(er) quality playback when HTML5 is used. At least, my 1080 HD vids on YouTube are low quality on high settings when played with HTML5 enabled.

  • Recording from Creative Media Aborts

    Hi all,
    I have been experiencing some probelms trying to record onto my computer via the creative media console. I have sound, and the computer registers the sound, but after a certain amount of time, the program simply stops recording and prompts a message "the recording process was aborted".
    I run win XP with a sound blaster audigy 2 sound card. The drive I am recording onto has over 39 gigs of space and I am recording from a pioneer djm 500 mixer plugged in via rca cables to the aux line 2.
    I am trying to record dj mix sessions and needless to say it is quite aggrevating to realize that nothing is recorded. The maz time I have tried is around 80 min (that of a cd).
    Here is the record settings I have been using:
    Channel: Auxiliry 2
    WAV, STEREO, 96,000 Khz, 16bit sample rate.
    Any thoughts?
    Thanks in advance - Michael

    Personally I've never heard of one. I know that Notmad can backup playlists onto the PC, but I'm not sure what format they're in. I'm thinking it isn't M3U though.

  • Problem when recording from the AUX phono output using creative x-fi elite

    Hello everyone?Hopefully someone will be able to help me out here, as I've tried everything, however nothing seems to work. I am using the x-fi elite pro on a windows vista ultimate PC. When recording analogue material, from a tape Dec, for instance, I am using the creative audio console which accompanies the x-fi elite pro. I am using the aux phono input on the back of the box, and everything has gone smoothly until a few days ago. When trying to record from my tape Dec this last week, I suddenly noticed that the sound was very distauted in the left channel. Right channel was fine.Of course the first thing I checked was the level, and this was absolutely fine too, both channels were set to around 50% in the sound-options control-panel. I then checked the cable and then tried it on other equipment as well, and everything was also fine here. I then re-connected it to the audio consul, but got the same results. Fine sounding audio in the right channel, but distauted in the left. I then tryed re-installing the newest vista-driver to see if this would solve my problem, however it didn't. Now I've only got audio in the right channel, but no audio at all in the left. Has somebody inhere experienced anything simurlar, and if yes, can you please tell me what could be wrong??All the best from Allan

    On certain mobo/graphics card set ups and some sound cards there is an issue with bus latency. In short while playing back audio you will hear a frequent crackling of the audio. That is not the same as the slight click the Elite pro makes when changing modes. It has been a Creative issue for many years but is only present with certain combinations of hardware. I have experienced that issue myself but several years ago. My current Elite Pro/PC set up does not have this issue.

  • How do I create a DVD with no theme, i.e., it plays what was recorded when inserted in the player?

    How do I create a DVD with no theme, i.e., it plays what was recorded when inserted in the player?  Nothing extra, just the recorded content.

    Hi
    No Menu on DVD
    from. Mishmunken
    How to create a DVD in iDVD6 without menu (there are several options)
    1. Easy. Drop your iMovie in the auto-play box in iDVD's Map View, then set your auto-play item (your movie) to loop continuously.
    Disadvantage. The DVD plays until you hit stop on the remote
    2. Still easy. If you don't want your (auto-play) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the drop-zone (text needs to be black as well).
    Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
    3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
    Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
    4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
    Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
    5. The "hard way". Post-production with myDVDedit (free-ware)
    Tools necessary. myDVDedit ( www.mydvdedit.com )
    • create a disc image of your iDVD project, then double-click to mount it.
    • Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
    • Set permissions to "read & write" and include all enclosed items; Ignore the warning.
    • Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
    • Select the menu (usually named VTS Menu) and delete it
    • Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned. If it works save and close myDVDedit.
    • Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
    //lonestar.utsa.edu/llee/applescript/dvdimager.html
    hope this helps!
    From LynnLU USA
    www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
    Yours Bengt W

  • HT3775 can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document "SC1ATK63.mov" could n

    Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • Is Creative going to make a mp3 player with the 24-bit Crystaliz

    I have dropped my Zen Touch 20 GB a few times (I know, I'm clumsy), and the most recent drop really damaged it. It still plays, but I can only scroll down with the touch pad (scrolling up goes down as well), and rarely the song skips forward randomly (progress bar does not skip forward though, this has happened ever since I got much Touch, but it happens slightly more frequently now).
    I've tried pushing in on the touch pad as some have suggested, and resetting the Zen Touch did not help.
    I was considering investing in a Zen Sleek Photo, but I think I will stick my Touch since I mostly use Shuffle play anyways.
    However, has Creative announced any plans to create a mp3 that uses the 24-bit Crystalizer from the X-Fi soundcard series? I have a X-Fi Fatlty edition, and the sound is absolutely amazing, it blows standard CD and mp3 players away. If Creative made a mp3 player with the Crystalizer, I would buy it no questions asked, death to the iPod!
    ... That's IF Creative makes one, so does anyone happen to know? It may not even be technically possible, but heck if I know

    Yes, it is technically possible and Creative will incorporate the X-Fi technology in its future MP3 players.
    This was confirmed by Creative CEO, Mr Sim Wong Hoo when Creative announced its quarterly earnings about a month ago.
    At that time, Mr Sim also said that the earliest we can see the X-Fi technology on Creative's MP3 players might be early next year.
    But as Creative will be releasing a yet-to-be-announced product in Paris tommorrow (8 dec), i'm not sure if we will get to see it earlier than expected!
    Just keeping my fingers crossed, but what ever new product Creative release tmr, it will definately make my xmas more merry!

  • Problem with Adobe Audition 2.0 and recording from a 1212m.

    I bought a brand new machine and have be configuring it all week. Everything has been going well, except getting Adobe Audition 2.0 (the new version) to “hear” sound from the 1212m.
    The intel 975 motherboard has an integrated HD sound system already on board and I have been able to get adobe audition to recognize it and record from it. This is what I have Windows XP Pro set to as my default sound card.
    I installed the 1212m and I have gotten my monitors to work by using the XLR jacks on the monitors to the ¼ inch jacks on the 1212m using a VST (NI’s Kontakt 2) as the audio source. So it works.
    What I can’t seem to get to work is getting Adobe Audition to “hear” the sound coming from the 1212m.
    Patchmix seems to be working ok. The audio bars jump each time I hit a note on the keyboard.
    I have configured Audition by going to Audio Hardware Setup and setting it to EMU ASIO and tried every combination of INPUT and OUTPUT, but when I hit the Record button in Audition it just flat lines..
    I was hoping that once the audio made it from the VST though the 1212m and out to the speakers, that getting Audition to record it would be easy, but that hasn’t been the case.
    The Intel 955 Extreme Edition and the 975 motherboard are brand new and I’m worried that being on the bleeding edge of technology, that one of the drivers isn’t working correctly and causing me hours of debugging a problem that is unworkable from my end.
    Hopefully the problem is just some small stupid thing that I’m doing or failing to do (like normal).
    Any ideas would be helpful.
    thanks

    I'm just saving it into a file in "My documents" on the internal hard drive. It's a computer in the office which has been used my other people before me and I have my own file which I was always able to save Adobe sound files into before, so I don't think it's anything to do with me not being allowed or read-only.
    I've also been trying to save it onto USB hard drives. This works when I save it under a different name, but not when I'm just trying to update a file i've been working on. Basically I have to create a new file everytime I add something, so like "myaudit1", "myaudit2", "myaudit3" etc etc, even though it's the same piece of work just updated.
    Hope that makes sense!

  • I purchased songs from Itunes store and I would like to record a CD to my parents with specific songs but when introduce the cd a message appears that the songs are not in MP3 format, how could I convert them?

    I purchased songs from Itunes store and I would like to record a CD to my parents with specific songs but when introduce the cd a message appears that the songs are not in MP3 format, how could I convert them?

    Hello
    In itunes...preferences you can change the setting to import songs instead of mp4  to mp3. Afer changing this setting, right click to the songs and than you are able to convert to mp3. ths's it

Maybe you are looking for