Recording from Mixer to Muvo 200 mi

Hi ! i ?m thinking buying a muvo 200 micro so that i can record my dj sessions directly to the muvo 200 micro. I just want to know if the quality is ok and if the process of recording from the mixer to Muvo 200 micro is automatically converted in mp3.Because in Portugal that?s what they say.Please i really need help. I don?t need the player for nothing else except that, so the recording quality through the Line - In but be good and but be converted in mp3 , because if it is recorded to wav. 256 , 52 and even G is not that much memory ....Urgent Help.

The line-in recording quality is poor. See other threads for details.
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=4283
Cheers

Similar Messages

Iphone 5 direct line in recording from mixer

I'm intending to buy an iphone in October and wants to find out if there are any external cables or devices I need in order to connect a direct line out from the mixer to the iphone 5 (I believe it should work the same in iphone 4s) to do recording. Or can I just plug in my 3.5mm audio out cable directly? Does the iphone 5 jack allow direct audio input? Please advise. Thanks!

did you solved your problem? My line ins disappeared too! (audigy 4)

Can't hear monitor / recording from mixer

I'm running three mics and a direct feed from a pre-amp into a Yamaha mixer and then from the mixer to the MBP using Garage Band purely as a recording device.
But I can't hear the mix that the Mac is recording.
Never used GB08 before.
Help! (Band goes on in an hour or two.)

Thanks!
(Part of the problem was that I was using a friend's BOSE headphones and he hadn't mentioned they have to powered on separately. Ok, that was dumb.)

Recording from Mixer to 13" Macbook Pro

Hey everybody,
First let me be frank, I don't know much about audio equipment/mixers etc., but I do know some. Anyway, I do a lot of remote high school play-by-play broadcasts using four separte external mics that run from my Yamaha MG102c mixer, back into my 13" Macbook Pro. The problem I seem to be having is figuring out how to get my computer to recognize the external source (Mixer), so that when I go to record my broadcast for future listening, I can just use garageband. Now, I know they make USB/Firewire mixers, but i had to do this on a budget. The cord I have that I thought would connect the mixer back to my mac is just a basic right and left 1/4" plug to 1/8" adapter that runs to the single headphone jack in my computer. I don't know if I am not using the correct line channels to get the audio that is coming from the mix back, but for some reason I continue to have trouble. Anyway, any help would be much appreciated.

MBP = Mac Book Pro.
Here is what I would do:
1) Verify that there is indeed audio coming out of your adaptor cable. You can do this by plugging that cable into some other audio device, to confirm that it is working. Also verify that you are coming out of the mixer a line or tape level.
2) Once you have verified that the mixer/cable is correct, plug it into the one audio jack on the 13" Mac Book that doubles as a line in and headphone output jack.
3) Launch Garage Band, and go to the menu Garage Band > Preferences. When the preferences open, click on the tab for Audio/Midi.
4) Set your Audio Input to Built-In Line Input.
You should be good to go.
MtD

Lots of audio pops when recording from mixer

I'm using FCP 5.1.4 on a mac laptop (don't know what type it is, but think it's somewhat recent). I'm recording a stage play's audio.
Here's my audio flow:
Mixer's 1/4" headphone jack -> 1/4" Stereo audio cable -> 1/8" stereo adapter at other end (have also tried 1/8" mono) -> Laptop's microphone port (no other input audio port available)
I can get a good signal, but there's constant audio pops/clicks happening at a steady rate. I remember reading somewhere else that problems can arise when recording directly from a mixer due to the high signal strength coming from it. Any ideas why this is happening? How do I fix this?

Phillip Roh wrote:
What is a mic bus level output?
Most better mixers have direct bus ins and outs. Just like plugging in a mic.
Laptop doesn't have a line in port
Get a different computer if you're expecting to enjoy doing audio capture.
If i used the RCA or XLR output jacks, would the popping still occur?
Irrelevant, it's all about signal type, resistance, milliamperes, millivolts and milliwatts. Not connectors. You can put an XLR on your power supply and it wouldn't change the voltage.
I think my workplace may have a few USB audio things lying around. Like it has 2 XLR input ports, then connects to computer through USB. Do you know if they tend to need certain software, or if they're plug and play?< </div>
Unknown from here. this is not a FCP question.
bogiesan

Recording from Mixing board to GB

I am a teacher in a middle school. In my industrial tech. class we have a radio broadcasting station. At this station I have a mixing board as well as other euipment. Now my mixing board has an output that runs to a reciever so I can play it over the speakers. I unplugged this and plugged in a RCA to 1/8" cable and plugged this into my macbook mic in. When i go to record music in GB all i get is a lot of static, but with the same set up just recording Talking into a mic through mixing board set up. it comes through just fine. Why do i get the static and how can i fix it?

I got it

Advice on recording vinyl mixes from 2 X turntables using Adobe Audition.

Hi,
I am a creative cloud member using the apps mostly for website design. I have a large collection of vinyl records. I am looking to digitize some 30 minute vinyl mixes from two technics and mixer and was thinking of using the Adobe Audition App which I can download to my laptop. Any advice to get me connected and started greatly appreciated !

what kind of mixer are you using? from my experience, as a vinyl collector turned vinyl dj... going between 45rpm 7"s, 45rpm 12"s and 33 1/3 12" LPs (mono AND stereo). good to know your mixer and your outputs on the analog side. i have found that to be the easiest way to bypass the heavy restoration work.
for relatively quick mixes. i just organize my audio files in the Files window and then start dragging and dropping into one track instead of any of those templates Audition has ready. The DJ Drop is completely ridiculous for someone like me who is spinning only 45s, recording from mixer booth to a tascam mxII recorder since I am doing that manually.
hope this helps.... somewhat? i am working on a 5 hour mix right now between 4 DJs and it's easier to just use regions instead of various tracks. Still a hell of a project.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Download recording from client 120 & upload it into 200

Hi all.
How to download recording from client 120, and upload it into client 200 in the same sap system ?
Thanks
Krupali

Hi,
I think u r talking about BDC recording.
1. Record the transaction using SHDB in client 120.
2. After recording u will get a Transaction Recorder page.
3. In this page, click EXPORT button inn the application bar.
4. Save it in the local file in ur desktop.
5. Go to client 200, SHDB - New recording.
6. Just give some transaction say SE38 and start recording.
7. Come back. u will a Transaction recorder page.
8. In this page, click IMPORT button and select the local file stored from client 120.
9. Then u will same recording of client 120 in client 200.
Regards,
Prem

Which Mac is best for music purposes? I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in. I'm looking at MacBook Pros; any tips? 13" or 15"?

Which Mac is best for music purposes? I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in. I'm looking at MacBook Pros; any tips? 13" or 15"?

I would think a 15" with the i7 CPU. You can get a 13" with the i7 CPU but the 15" has a dedicated graphic chip along with the intergrated one.
You will also need to upgrade the hard drive to a faster 7200RPM model instead of the standard 5400RPM model that comes with all MBPs. The Sibelius website recommends the 7200RPM or a SSD. You will also be better off installing 8GBs of RAM.
Both of those upgrades can be made after you buy a MBP for much less then Apple charges for the same upgrades and you get to keep the original RAM and hard drive.

Search and Delete a specific record from a CSV file

Hi All,
I am new to java . I want to search for the records from CSV file and delete the row form the file.
Below is my Sample .csv
100||a100||1b100
200||b200||dc300
200||bg430||ef850
400||f344||ce888
Now I need some help in below requirements.
1.How to delete a record having value 200 and b200?
2.If record already exists how to update the existing record with new values?
Please share your ideas or give me some code snippet..
Thanks in Advance

In that case Do i need to write the entire contents of my file to a hash table(sumthng like this) and modify the Second row in my case with the new values..
is it possible??I would have done like this (though there maybe better methods)
1- create a class representing the record.
class Record{
      String field1;
      String field2;
      String field3;
      // and so on....
      //setters
      public void setFeild1(String str){
          field1=str;
      // and so on....
      //getters
      public String getFeild1(){
          field1=str;
      // and so on....
      public String toString(){
           return(field1+"||"+field2+"||"+field3);
}//end class2- then create an ArrayList meant to have objects of this class (Generics).
3- read from the file , create a new Record Object and add that to the ArrayList
4- perform operations on the ArrayList (you can add new records, and delete record, update......)
5- write the record back to file using 'toString()' method.
is there ne sample code available for thisdon't know, but you rarely get full code on forums.....outline given can be followed
Thanks!
Edit: It appears that 'r035198x' and me have the same point. This shows that this methodology is almost a standard way( if we ignore the Random access files.....)
Edited by: T.B.M on Jan 13, 2009 2:39 PM

Getting OOM error while retreive 2lakhs record from DB

I have a java program with a simple Select query that fetches around 2lakhs record from DB and will display in a JSP Page.
When I try to fetch huge amount of data the server causing OOM.
I got few suggestions to add setFetchSize(1000) to my Statement.
I am confused here, whether i need to setFetchSize() to Statement or to Resulset.
Pls suggest me a asolution to retrieve all the records and to avoid OOM error.

66bdf8de-2e37-445a-8436-0ad04a325040 wrote:
Please find my answers below
What is a lakh?
      A lakh or lac is a one hundred thousand
someone looking at a JSP page really want to crawl through a result set that large
     Yes, All the records will be displayed in a JSP Page and User will be navigating through all the records.
Seriously? Some human being is going to navigate through a page containing 200,000 records? Seriously?
I tested with both the scenario(setFetchSize() to Statement or to Resulset), it didnt work for me, still getting same OOM .
Then it would appear that the answer to your question "whether i need to setFetchSize() to Statement or to Resulset" is .... "neither".

Issue with fetching a record from IHPA table with PARNR value as condition

Hi All,
I am trying to fetch a particular record from IHPA table where i am giving the OBJNR number, PARVW and PARNR as customer no. , But I am not getting any record but if i will give OBJNR and PARVW it will generate a record with having same PARNR value.
Example :
case 1st :-
when i am passing following values in IHPA table,
OBJNR = IE000000000010070910
PRAVW = BP
PARNR = 620000562
it is not generating any record
case 2nd:-
But if i will pass
OBJNR = IE000000000010070910
PRAVW = BP
it will generate a record?(one row) which will include PARNR as same 620000562 along with other value.
Q1 - Why it's not generating in case 1st,
Q2 - How I will resolve this issue ? as i have to link some table as EQUI -
IHPA -
VCKUN
VCNUM ?
      I have written a code for this to join :
     SELECT A~EQUNR
       B~PARVW
       C~CCNUM
       D~CCNUM
       FROM EQUI AS A JOIN IHPA AS B ON AOBJNR = BOBJNR
       INNER JOIN VCKUN AS C ON BPARNR = CKUNNR
       INNER JOIN VCNUM AS D ON CCCNUM = DCCNUM
       APPENDING CORRESPONDING FIELDS OF TABLE IT_OBSO
       WHERE A~EQUNR IN S_EQN.
             AND PARVW = 'BP'.
      But it is not generating any record but when i am commenting the PARVW i am getting the mixed record of PARVW as (BP,SP,SH)
Let me know if any more clarification required.
Highly appreciate your help
Thanks & Regards
Shaw

Hi Santosh,
Thanks for your quick response.
But I am Sorry, I already checked with putting Zero before PARNR.
The issue is still as it is.
Thanks
Shaw

How to record from the video in or S-video Ports on Qosmio G40?

Can anyone tell me how to record from the video in or S-video ports, because i've tried the Ulead DVD factory program and the only capture device it could see was the webcam, and it did capture from it
After that i've downloaded the update file that was provided by the support website
The devices that the program could see are the TV tuner and the webcam (which it couldn't access anymore for some reason)
After that i've downloaded a newer update which simply is the same as the last update and seems that someone in the support website directed the link of the new update which they don't have to the file of the previous update which doesn't really do anything.

Hi
There are 2 s-video ports; s-video out port is not designed to capture the signals from any external source. The name of this port says everything; its an OUT port!
The s-video-in port must be placed at the right side of the notebook. Dont mix the both ports. But note; this port receives only the video signals. To hear the sounds, use a video cable to connect the sound terminals of the audio device and your computer.
Red: sound right channel
White: sound left channel
The Ulead DVD Movie factory can be used to capture this signal.

Recording from mic, not sound card

Hi there. Relatively new to Audition so trying to get my head around it!
I'm using Adobe Audition 3.0 and i'm mucking about with it basically to get some experience for my uni project. I'm trying to compile and edit together a collection of audio clips from a number of web streams. I've done it before for a while on a different computer and it worked fine but i'm having trouble doing it right on this occasion.
Basically, it's recording from my microphone rather than what's being played on the computer. I have no idea how to change this. Any help guys?

I bet you've moved to a Vista or Windows 7 machine.
Under pressure from the record companies, the ability to record the Stereo Mix output of you computer has been disabled or removed from many new computers.
You may be lucky and find it's only been disabled on your machine. If so, then do the following:
To enable:
->> go to Control Panel
->> Hardware and Sound
->> Manage Audio devices
->> in the Recording tab window right click in the white area away from any devices and from the menu enable "Show Disabled Devices" and "Show disconnected devices"
->> right click on Stereo Mix to get the properties window and in Device usage "Use this device (enable)"
However, there have been many reports in here (you can do a search) that some computer manufacturers are actually removing this ability entirely, again under pressure from the record companies.
This being the case, you might try some software called Virtual Audio Cable: http://software.muzychenko.net/eng/vac.htm
You have to pay for it but at least there's a trial version so you can see if it works for you before laying out your money.
Bob

Recording from Mixer to Muvo 200 mi

Similar Messages

Maybe you are looking for