Recording from slide notes

Hi, I know how to record a voice over, but I typed what I want to say as slide notes. However, when I press record, the screen just switches to my slides, without the notes. Thus I can't see what I had decided to say! Is there a way to see the slide notes while recording the voice over? Otherwise, I will have to extract all the text, and do it that way, but that would involve more difficulty in synchronizing the text with each slide. Thanks for the help. Roy

GB does not offer step recording, however you can hand-enter notes in the editor:
http://www.bulletsandbones.com/GB/GBFAQ.html#cantaddmidinotes
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Recording from mic, not sound card

Hi there. Relatively new to Audition so trying to get my head around it!
I'm using Adobe Audition 3.0 and i'm mucking about with it basically to get some experience for my uni project. I'm trying to compile and edit together a collection of audio clips from a number of web streams. I've done it before for a while on a different computer and it worked fine but i'm having trouble doing it right on this occasion.
Basically, it's recording from my microphone rather than what's being played on the computer. I have no idea how to change this. Any help guys?

I bet you've moved to a Vista or Windows 7 machine.
Under pressure from the record companies, the ability to record the Stereo Mix output of you computer has been disabled or removed from many new computers.
You may be lucky and find it's only been disabled on your machine. If so, then do the following:
To enable:
->> go to Control Panel
->> Hardware and Sound
->> Manage Audio devices
->> in the Recording tab window right click in the white area away from any devices and from the menu enable "Show Disabled Devices" and "Show disconnected devices"
->> right click on Stereo Mix to get the properties window and in Device usage "Use this device (enable)"
However, there have been many reports in here (you can do a search) that some computer manufacturers are actually removing this ability entirely, again under pressure from the record companies.
This being the case, you might try some software called Virtual Audio Cable: http://software.muzychenko.net/eng/vac.htm
You have to pay for it but at least there's a trial version so you can see if it works for you before laying out your money.
Bob

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Captivate 7 not showing the red frame when recording a slide

I've been using the "Record Additional Slides" button since Captivate 5, and never run into this problem: the red frame that lets you define what you want to capture is not displaying. When I try to record, Captivate captures a portion of the software window, and the desktop. How can I force the red frame to display?
Thank you for your help!
Heloisa
*** By the way, it is happening when I run Captivate from my Apple computer. I just tested running Captitvate on my parallels machine, and the frame does show up.

Hello,
Just to clarify, the problem (no red frame while recording slides) happens only on the Apple version of Captivate. It runs fine on my parallel machine, however I am running a trial version there. My license is for the Apple platform. I'm concerned because my trial period will expire soon. the weird thing is that the Captivate that I have in my machine at home does not present this behavior. Only the one in my work machine.
The project resolution is 930px x 697px
This is the 14th module that I am developing for a training suite.I have never encountered this problem before. It all started after the Maverick's fiasco
So do you think I should uninstall Captivate and start a brand new install? I tried changing the name of the folder but that didn't help much.
Thank you!
Heloisa
*****I just uninstalled and re-installed Captivate 7 7o my apple machine, but the problem persists. ;(

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

DTP does not fetch all records from Source, fetches only records in First Data Package.

Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
Shiva

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Delete records from tableA which are not in tableB

Table A contains milions of records which is the best way to delete records from tableA which are not in tableB
delete from tableA where empno not in (select empno from tableb)
or
delete from tableA where empno not exists (select empno from tableb
where b.empno=a.empno)
any help

Hi
If you can do this, do with this:
create table tableC
as select a.*
from tableA a,
(select empno from tableA
minus
select empno from tableB) b
where a.empno = b.empno;
drop table tableA;
rename table tableC to tableA;
Ott Karesz
http://www.trendo-kft.hu

Form does not show "new" records from SQL Database

I have a PDF form that pulls data from a SQL Server. The fields in
the PDF are populated from the database after selecting a specific
record from a drop down and then clicking on a button labeled "Fill".
The problem is that the dropdown does not display new records that
have been recently added to the database. I have to open the form up
in designer then save it, (*note - I change nothing at this point.)
Then when the form is opened back up in Adobe the dropdown show all
the records including the new ones. I even put a manual refresh on
form to try and fix this an it did not help. Seriously stumped.
Any help is greatly appreciated.
Here is my code for the dropdown.
++++++++++++++++++++++++++++
topmostSubform.Page1.JobSelect::initialize - (JavaScript, client)
var sDataConnectionName = "BBCC"; // example - var sDataConnectionName
= "Test";
var sColHiddenValue = "ContractAdmin_Key"; // example - var
sColHiddenValue = "Dept_ID";
var sColDisplayText = "JobDescription"; // example - var
sColDisplayText = "Dept_ID"
// Search for sourceSet node which matchs the DataConnection name
var nIndex = 0;
while(xfa.sourceSet.nodes.item(nIndex).name != sDataConnectionName)
nIndex++;
var oDB = xfa.sourceSet.nodes.item(nIndex);
oDB.open();
oDB.first();
// Search node with the class name "command"
var nDBIndex = 0;
while(oDB.nodes.item(nDBIndex).className != "command")
nDBIndex++;
// Backup the original settings before assigning BOF and EOF to stay
var sBOFBackup =
oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("bofAction");
var sEOFBackup =
oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("eofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayBOF",
"bofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayEOF",
"eofAction");
// Clear the list
this.clearItems();
// Search for the record node with the matching Data Connection name
nIndex = 0;
while(xfa.record.nodes.item(nIndex).name != sDataConnectionName)
nIndex++;
var oRecord = xfa.record.nodes.item(nIndex);
// Find the value node
var oValueNode = null;
var oTextNode = null;
for(var nColIndex = 0; nColIndex < oRecord.nodes.length; nColIndex++)
{ if(oRecord.nodes.item(nColIndex).name == sColHiddenValue)
{ oValueNode = oRecord.nodes.item(nColIndex); } else
if(oRecord.nodes.item(nColIndex).name == sColDisplayText) { oTextNode
= oRecord.nodes.item(nColIndex); } }
while(!oDB.isEOF())
this.addItem(oTextNode.value, oValueNode.value);
oDB.next();
// Restore the original settings
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sBOFBackup,
"bofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sEOFBackup,
"eofAction");
// Close connection
oDB.close();
++++++++++++++++++++++
Here is code for the refresh button
+++++++++++++++++++++
topmostSubform.Page1.Button27::click - (JavaScript, client)
sourceSet.BBCC.requery();
+++++++++++++++++++++

pguerett wrote:
The other thing that might be happening is a refresh issue on the DropDownList. Try adding the command xfa.layout.relayout() after the database connection has been closed.
Paul
Good catch Paul! Would you believe that I have been trying to get this resolved for almost two years! Works perfect now.
Thank you,
- Eric

How to read some records from a text file into java(not all records)

hello,
how to read text files into java. i need only few records from the text file not all records at a time.
If any one knows plz reply me
my id is [email protected]

this snipet reads a text file line by line from line 1 to 3
try {
              FileReader fr = new FileReader(directory);
              BufferedReader br = new BufferedReader(fr);
              int counter = 0;
              while ((dbconn = br.readLine()) != null) {
                  switch(counter){
                      case 0:
                        status = dbconn;
                      break;
                      case 1:
                        userName = dbconn;
                      break;
                      case 2:
                        apword = dbconn;
                      break;
                  counter++;
              br.close();
    }catch(IOException e){
    }

How can i get all the records from three tables(not common records)

Hi
I have four base tables at R/3-Side. And i need to extract them from R/3-Side.
And i dont have any standard extractor for these tables .
If i create a 'View' on top of these tables. Then it will give only commom records among the three tables.
But i want all the records from three base tables (not only common).
So how can i get the all records from three tables. please let me know
kumar

You can create separate 3 datasources for three tables and extract data to BW. There you can implement business login to build relation between this data.

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not. My question are: Why does my computer think it's blank? And how can I copy a DVD?

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, Sheila

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Sound recorded from the phone through in-line to Zen V is weak, not loud eno

I wonder if anyone is trying to achieve the same result with more success. When I record from the phone through a cable to the Zen V and transfer the recording to the computer the sound is not loud enough to be easily understood, despite the fact that on the Zen with the earphones the quality is satisfactory. Can someone help get a louder recording into the computer?TIA

I have tried that. I had listened to the headphones to monitor the sound. It is the pre-set recording level programed in the player. There should be a way to back it down if needed or set the pre-prog. level to a lower setting on the line-in mode. So far Creative is working with me via e-mail. Hopefully they can remedy my situation. Somehow I think I am not the only one with this problem.

Recording from slide notes

Similar Messages

Maybe you are looking for