Recording from sub and an aux channel

How can you record from a sub or an aux?
Fresh_oil

Are you actually sending some of each of the six tracks to the bus?
(little knobs next to the bus assignment under "sends")
Do you have the Aux or any of the 6 tracks muted?
DO you have the master muted?

Similar Messages

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

Performance problem with selecting records from BSEG and KONV

Hi,
I am having performance problem while selecting records from BSEG and KONV table. As these two tables have large amount of data , they are taking lot of time . Can anyone help me in improving the performance . Thanks in advance .
Regards,
Prashant

Hi,
Some steps to improve performance
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING" creates more coding but is more effcient.

Fetching record from table and displaying in JSP while loading page -struts

Hi all,
I have a problem relating to struts .
I am fetching records from database and I want to diaplay those records in corresponding fields in the jsp page.
I am using Struts MVC Framework.
I am giving the sample code below.
In my action class i am giving the following code.
String sql="Select empname from emp where empcode='1' ";
ResultSet rs=S.executeQuery(sql);
if(rs.next()){
EditForm e=new EditForm();
e.setEmpname(rs.getString(1));
In my Action Form
I gave setter and getter methods for Empname
public String getEmpname() {
return empname;
public void setEmpname(String empname) {
this.empname = empname;
In my jsp gave
<html:form method="POST" action="submitForm.do?action=1" >
<html:text property="empname" />
</html:form>
The targets given are correct and it is being redirected.
But the value is not displaying in the textbox while the jsp is loading.
There is a record for the sql query.
Anybody please help me out
It is very urgent
Thank You
Parvathy

Now in the following code, why are u creating a new form?
Why dont you use the form which is input to the Action Class's execute methof?
if(rs.next()){
EditForm e=new EditForm();
e.setEmpname(rs.getString(1));
}Thanks and regards,
Pazhanikanthan. P

Which Mac is best for music purposes? I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in. I'm looking at MacBook Pros; any tips? 13" or 15"?

Which Mac is best for music purposes? I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in. I'm looking at MacBook Pros; any tips? 13" or 15"?

I would think a 15" with the i7 CPU. You can get a 13" with the i7 CPU but the 15" has a dedicated graphic chip along with the intergrated one.
You will also need to upgrade the hard drive to a faster 7200RPM model instead of the standard 5400RPM model that comes with all MBPs. The Sibelius website recommends the 7200RPM or a SSD. You will also be better off installing 8GBs of RAM.
Both of those upgrades can be made after you buy a MBP for much less then Apple charges for the same upgrades and you get to keep the original RAM and hard drive.

Mac Mini, Audacity and recording from vinyl and CD

I'd like to record some of my vinyl and CD collection but I've tried following the Audacity instructions but I can't get them to work. Either I don't seem to have the right Line In / Line Out or I seem to have everything right but it just doesn't work.
I play my vinyl and CDs on separates that are hooked up to my mac via an R8 Jack (?). Is it possible to use audacity to record from them?

Hi, what is an R8 jack? Do your devices output Line level?
Audio in/optical audio in port ...
The Audio In port accommodates both digital optical input and analog audio input.
Analog audio line input is accepted through a 3.5mm mini phone jack. The sound input port accepts line-level stereo signals up to 24-bit stereo 44.1-192kHz sampling rate. It also accepts a stereo miniplug-to-RCA cable adapter for connecting stereo equipment to the computer.
Optical audio input is SPDIF format and uses a standard TOSLINK cable with a TOSLINK mini-plug adapter, accepting up to 24-bit stereo and 44.1-96kHz sampling rate.
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

Delete Reverb and Delay Aux Channels

I want to save all the processor power I can, so I want to completely delete the default reverb and delay bussed aux channels that come up automatically when you start a new concert. When I select them, Delete is gray-ed out under the edit tab. How can I get rid of these?

Hi
These are Concert level channels, so to delete them you will need to select the Concert at the top of the Patch List.
You may also want to remove any associated Sends.
CCT

A.A. 3.0./ Want to Record from Soundcard1 and listen from another Soundcard

Hiho,
I Got 2 Soundcards which are installed. a Terratec Phase 22 Recording Soundcard (1) and a Creative Soundblaster Xtreme Music (2).
It would be nice if Adobe Audition 3.0 would give me the Sound of the Creative Soundcard but Record from the Terratec Soundcard. The problem is that if i choose the Terratec ASIO driver Adobe takes away any option to use the Creative Soundcard. If i use the Creative driver, the Terratec Soundcard isnt displayed anymore.
2 Screenshots to understand what i mean:
http://www.imagebanana.com/view/spxtl4y4/1.JPG
http://www.imagebanana.com/view/ewb5z15z/2.JPG
http://www.imagebanana.com/view/x79ora17/creativeasio.JPG
help would be great. please excuse my bad english, like you see at the Screenshots im from Germany.

ASIO can only use one sound device - that's an ASIO system limitation, not an Adobe one. The only way around this is to use an ASIO to WDM converter, and the only one that's usable in this context is ASIO4ALL, which fortunately for you, is free. At least this way, you will see both cards as being available, but there is a limitation in that you will only get whatever inputs and outputs are available via WDM, and this is often limited to a stereo pair per device.

Diplaying records from database and allowing user to select row

I am trying to diplay some records from a database inside of a JPanel that I am going to add to a JFrame application if the user clicks on an "Index view" button, then allow the user to select a particular row. When they double click on a row, it will load that record into another JPanel I created to display that record. My question is how would I display the record(s) in a way that will allow the user to select the row?

OK, so the user can select a row. I was thinking of adding this JTable to a JPanel inside of a JFrame, but if I also want to allow the user to click on a button on the left side of the JFrame ('A' to 'Z'), which will highlight the first record starting with that letter, is it better/easier to put the JTable directly in the JFrame, or put inside a JPanel first?

How I calculate the flv file size whe I recording from camera and microphone?

Hi all:
I'm recording video from my webcam and my microphone.
I would like to know how I can to determinate via some formula, approximately, the result file size due to camera and microphone configuration.
I show you my actual configuration:
     // setup cam
    cam = Camera.get();
    // setting dimensions and framerate
    cam.setMode(320, 240, 30);
    // set to minimum of 70% quality
    cam.setQuality(0,70);
    // setup mic
    mic = Microphone.get();
    mic.setRate(22);
Only ohert question:
What enconders are using to encoder video and audio by default?
Regards, Roberto.

I'd say 9.4 mb is correct. Email attachments always put on a lot of weight, so 12 mb as an attachment is probably right too.
Why don't you use a free service like Filemail? It's very easy to use, and you dont't have to sign up to use it.

Recording from vinyl and normalizing?

Hey everyone, just signed up as I use this quite a bit and thought I'd firstly say thanks to everyone for putting that effort in and being helpfull.
I have been recording my old vinyl collection (Old Skool Garage woo!) and have been normalizing the recorded regions in the audio edit window through the factory drop down menu. The parts are always highlighted and has been working fine. (also read about normalizing and how its not cool to use it, but its a habit and will have to read up more before I stop!) Anyways, this particular recorded audio region will refuse to be normalized and I'm just wondering if anyone had any pointers.
Thanks again in advance,
Bill

Thanks for the quick reply,
I tried the search peak function but couldn't find any, I have 4 different audio regions that have been cut up from one take. All of them won't let me normalize them. I have used the same arrange window to record the tracks before these. I have just been deleting the audio once I have bounced them then recording the next one....

Urgent- How to separate bad records from load and put into a separate table

We have an error handling requirement in ODI 11g from the client that whenever a bad record is encountered the execution flow shud not stop rather it shud separate those records into an error table so that at the end of the load we shud be left with all the records (except bad records) in the target table and those bad records shud be there in a separate error table.
The definition of the bad records may include the size of a column or datatype mismatch between source and target table. How to implement this error handling strategy in ODI or is there any out of box solution that we can leverage Please Help.
Thanks & Regards,
SBV
Edited by: user13133733 on Dec 23, 2011 4:45 AM

Hi SBV,
Please find my responses below,
I have tried the steps suggested, however i have some doubts:
1. What all data exceptions (e.g. primary key constraint violation etc.) are covered in this mechanism?Yes you can handle PK,FK, Check constraints violations etc., using CKM.
2. If there is a column size mismatch between source and target table will this work? (I think not because i tried it and it'll give error before populating the I$ table, because I$ is created according to the source).
You are right column size mismatches will not be captured as a part of default CKM property.
Also i am getting an error in the creation of SNP_CHECK_TAB step. In my case ODI is by default making a query like "create table .SNP_CHECK_TAB" , now this dot (.) before SNP_CHECK_TAB is making it an invalid table name and hence this step is a warning (not an error), but in the next step (delete previous checksum) it is throwing an error as this step is also looking for .SNP_CHECK_TAB table which is not there.
Please help me where the issue lies. I have NO idea why it is making that query by default I have freshly impoted the CKM Oracle and used it.
This is coz there is no DEFAULT physical schema not defined at your target data server.
Go to, Topology Manager-> Phy architecture -> <Your Technology>-> <Your target data server>-> expand, open up your physical schema and check DEAFULT.
Thanks,
Guru

Quarter-inch female to a 3.55mm male to connect guitar to my Ipod Touch 4th gen. It still records from mic and not from wire.

Hey everyone, I recently bought a quarter-inch female to a 3.55mm male to connect my acoustic electric guitar to my Ipod Touch 4th gen. Now when I connect it, it doesn't actually take the sound from the wire, it still keeps the mic open. Any suggestions?

You can try putting the iPod into Recovery Mode and restoring it:
http://support.apple.com/kb/ht1808
If that doesn't work, then sorry but the jailbreak may have permanently corrupted your iPod. Since we cannot help with jailbroken devices in these forums, you'll need to look elsewhere for additional suggestions and advice.
Regards.
Message was edited by: Dave Sawyer

Purging records from Facts and Dimensions in the source sql server DB

The cube contains 5 dimensions table and 1 Fact table and in the source DB it has foreign key constraints. The Fact table size has grown large ~10 GB and only 1 dimensions table size has grown to ~10 GB. The other 4 Dimensions table size is very small not
in GB.
All the Dimensions has primary keys and all these primary keys are maintained as Foreign keys references in the Fact Table.
Is it necessary to purge data from all the dimensions table after purging from the Fact Table ?
or
Is it Ok if I purge data from only the Fact table and 1 dimension table whose size is ~10GB ?
Thanks in advance.

It begs to ask, were the Fact table rows needed in the first place? Perhaps the "better" long-term solution is to identify a partitioning strategy so that there is not a lot of deletion happening.
Back to the original question, it is best to purge from the other Dimension tables as well, if you know that the other Dimension members will no longer be used. Aside from confusing/cluttering the end user with Dimension members that are irrelevant, it will
help reduce the processing time for the future.
-Please mark as answered if this answers your question.

Mysql query returns different number of records from coldfusion and navicat

Hi
I'm hoping that someone can suggest a basic strategy to debug this.
I have a fairly large and complicated query that is executed by a function in a cfc.
It returns (for example) 100 rows.
If I use cfdump and then copy and paste the SQL of the query (with the variables, of course) into Navicat and execute exactly the same query on the same mySQL database, it returns 130 rows.
Same SQL string, same database, same data - the only difference is that in one instance Navicat submits the query and in the other, Coldfusion does.
Has anyone ever had anything like this happen before?

Ok I found my own bug. Of *course* the sql queries were not identical.. they could not possibly have been. My mistake was thinking that they were.
The problem was part of the WHERE clause:
AND orderid in (500,503,505)
In the coldfusion code this was
AND orderid in (<cfqueryparam cfsqltype="cf_sql_varchar" value="#lstOrderID#">)
which of course rendered in mySQL as AND orderid in ('500,503,505')
This was not immediately apparent as the cfdump returns this as AND orderid in (?) with the variable in the array below.

Recording from sub and an aux channel

Similar Messages

Maybe you are looking for