Recording from tape player with line-in feat

Hi All-
I got my Zen Nano plus a few months ago after failures with 2 other mp3 players. I really like the idea of being able to take recordings from my tape player. However one feature that is very annoying is that it will stop when the level gets too low and then start again when the tape starts up again. When I am trying to capture voice, I'm loosing a lot of the beginings of words. Is there any way to disable or get around the on -off and have it record continuously? Or are there other mp3 players or HD players that have this feature?
Many thanks
Ann

The best idea is to convert from analog tape recording to digital files on your pc. The processor on the pc is much much more powerful, and the conversion programs that run on the pc offer so many options to help enhance sound quality. After the conversion is made on the pc you could then use a processing program to raise the volume on the softer parts of the recordings. The Nano Plus is an excellent mp3 player, but its line in quality and microphone quality are not so good.

Similar Messages

Walkman tape player to line-in no internal speaker response

Hello :
Walkman connected to Line-in socket.
In Preferences :
Input set to "line-in", in/out volumes "full", mute "off"
Input level shows signal from tape player is being received.
Output set to "internal speakers", balance 50:50, volume full
The Walkman works with earphones. Tape is good and can be heard using earephones connected to Mac headphone socket.
However, despite all this, there is no sound from the PB internal speakers.
Any ideas ?
Thanks : DW

An Intel iMac is not an G5 iMac. See Knowledge Base Article http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
Suggest that you repost over in the Intel-based iMac Forums where users using the same model computer as yourself will be able to help you.

Qosmio G20: Recording from tape deck to computer

My Qusmio G20 manual says the 'Monitor-in Port' functions as a 'line-in Port' for connecting an audio device. However, I have connected up my tape deck's line-out ports to the computer's 'Monitor-in Port' with the appropriate cables and jack and get no signal/tape playing through the computer's speakers.
Can anyone advise me on whether this is truly possible to do, and if so, where I might be going wrong?
Thanks in advance.

Thanks for your reply, Alcahest.
The speaker Icon you talk of (Volume Control) only has 'line-in' listed in the 'recording properties' section of it, and having its box checked doesn't relate to muting but allowing, so far as I can figure. Anyway I have tried all variations of ticked and unticked boxes in 'volume control' and in the 'recording control' section of it, with no success.
Odd thing is, if I plug into the microphone socket on the computer I do get the tape deck playing through the speakers, but unfortunately only in mono.

Issue with fetching a record from IHPA table with PARNR value as condition

Hi All,
I am trying to fetch a particular record from IHPA table where i am giving the OBJNR number, PARVW and PARNR as customer no. , But I am not getting any record but if i will give OBJNR and PARVW it will generate a record with having same PARNR value.
Example :
case 1st :-
when i am passing following values in IHPA table,
OBJNR = IE000000000010070910
PRAVW = BP
PARNR = 620000562
it is not generating any record
case 2nd:-
But if i will pass
OBJNR = IE000000000010070910
PRAVW = BP
it will generate a record?(one row) which will include PARNR as same 620000562 along with other value.
Q1 - Why it's not generating in case 1st,
Q2 - How I will resolve this issue ? as i have to link some table as EQUI -
IHPA -
VCKUN
VCNUM ?
      I have written a code for this to join :
     SELECT A~EQUNR
       B~PARVW
       C~CCNUM
       D~CCNUM
       FROM EQUI AS A JOIN IHPA AS B ON AOBJNR = BOBJNR
       INNER JOIN VCKUN AS C ON BPARNR = CKUNNR
       INNER JOIN VCNUM AS D ON CCCNUM = DCCNUM
       APPENDING CORRESPONDING FIELDS OF TABLE IT_OBSO
       WHERE A~EQUNR IN S_EQN.
             AND PARVW = 'BP'.
      But it is not generating any record but when i am commenting the PARVW i am getting the mixed record of PARVW as (BP,SP,SH)
Let me know if any more clarification required.
Highly appreciate your help
Thanks & Regards
Shaw

Hi Santosh,
Thanks for your quick response.
But I am Sorry, I already checked with putting Zero before PARNR.
The issue is still as it is.
Thanks
Shaw

Delete 50 Million records from a table with 60 Million records

Hi,
I'm using oracle9.2.0.7 on win2k3 32bit.
I need to delete 50M rows from a table that contains 60M records. This db was just passed on to me. I tried to use the delete statement but it takes too long. After reading the articles and forums, the best way to delete that many records from a table is to create a temp table, transfer the data needed to the temp table, drop the big table then rename temp table to big table. But the key here is in creating an exact replica of the big table.I have gotten the create table, indexes and constraints script in the export file from my production DB. But in the forums I read, I noticed that I haven't gotten the create grant script, is there a view I could use to get this? Can dbms.metadata get this?
When I need to create an exact replica of my big table, I only need:
create table, indexes, constraints, and grants script right? Did I miss anything?
I just want to make sure that I haven't left anything out. Kindly help.
Thanks and Best Regards

Can dbms.metadata get this?
Yes, dbms_metadata can get the grants.
YAS@10GR2 > select dbms_metadata.GET_DEPENDENT_DDL('OBJECT_GRANT','TEST') from dual;
DBMS_METADATA.GET_DEPENDENT_DDL('OBJECT_GRANT','TEST')
GRANT SELECT ON "YAS"."TEST" TO "SYS"
When I need to create an exact replica of my big table, I only need:
create table, indexes, constraints, and grants script right? Did I miss anything?
There are triggers, foreign keys referencing this table (which will not permit you to drop the table if you do not take care of them), snapshot logs on the table, snapshots based on the table, etc...

Creating 12 monthly records from 1 recod with 12 data fields

Greetings;
I need to generate one record per month from one input record containing 12 monthly quantity fields.
Does anyone have an example or document on how to do this?
Jim

Hi Jim,
Proposed solution maybe not elegant, but works.
In your communication structure you should have all characteristics and 12 KFs. As I time char you can use 0CALDAY or 0CALMONTH (just think how you will populate this char). The time char value in the file should corresponds to the first month.
In the cube youll have one KF instead of 12 and a time char.
Start routine in Urs code:
DATA: wa_temp TYPE DATA_PACKAGE_STRUCTURE OCCURS 0 WITH HEADER LINE.
*Here we populate additional internal tables with values for February December.
Original Data_Package will hold data for January
LOOP AT DATA_PACKAGE INTO wa_temp.
wa_temp-/BIC/YourKF = wa_temp-/BIC/KeyFigure02.
Assign here wa_temp-CALDAY or wa_temp-CALMONTH for February
APPEND wa_temp.
wa_temp-/BIC/YourKF = wa_temp-/BIC/KeyFigure03.
Assign here wa_temp-CALDAY or wa_temp-CALMONTH for March
APPEND wa_temp.
wa_temp-/BIC/YourKF = wa_temp-/BIC/KeyFigure12.
Assign here wa_temp-CALDAY or wa_temp-CALMONTH for December
APPEND wa_temp.
ENDLOOP.
Append data for February-December to January data
LOOP AT wa_temp.
APPEND wa_temp TO DATA_PACKAGE.
ENDLOOP.
ABORT = 0.
Best regards,
Eugene

Issue in retrieving all the records from ADF Table with multiple row

Hi,
As per my requirement, I need to fill the table with multi selected LOV values and when user clicks on commit, I need to save them to database.
I am using ADF 11g, Multi select table. Using the below ADD method, I am able to add the records but if user clicks on cancel, I need to remove those from view and clear the table as well.
But the Issue I am facing is, in my cancel method, always I am getting half of the records. Lets assume table contains 100 records but in my cancel method, I am getting only 50 records.
Please let me know what is the issue in my source code.
ADD Method:
public void insertRecInCMProcessParamVal(String commType, String processType, Number seqNumber){
try{
Row row = this.getCmProcessParamValueView1().createRow();
row.setAttribute("ParamValue7", commType);
row.setAttribute("ProcessType", processType);
row.setAttribute("CreationDate", new Date());
row.setAttribute("CreatedBy", uid);
row.setAttribute("ParamValueSeqNum", seqNumber);
row.setAttribute("ProcessedFlag", "N");
this.getCmProcessParamValueView1().insertRow(row);
}catch(Exception e){
e.printStackTrace();
Table Code:
<af:table value="#{bindings.CmProcessParamValueView11.collectionModel}"
var="row"
rows="#{bindings.CmProcessParamValueView11.rangeSize}"
emptyText="#{bindings.CmProcessParamValueView11.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmProcessParamValueView11.rangeSize}"
rowBandingInterval="1"
selectedRowKeys="#{bindings.CmProcessParamValueView11.collectionModel.selectedRow}"
selectionListener="#{bindings.CmProcessParamValueView11.collectionModel.makeCurrent}"
rowSelection="multiple"
binding="#{backingBeanScope.backing_app_RunCalcPage.t1}"
id="t1" width="100%" inlineStyle="height:100px;" >
<af:column sortProperty="ParamValue6"
sortable="true"
headerText="#{bindings.CmProcessParamValueView11.hints.ParamValue6.label}"
id="c1" visible="false">
<af:inputText value="#{row.bindings.ParamValue6.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue6.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue6.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue6.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue6.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue6.tooltip}"
id="it3">
<f:validator binding="#{row.bindings.ParamValue6.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="ParamValue7"
sortable="true"
headerText="Comm Type"
id="c2">
<af:inputText value="#{row.bindings.ParamValue7.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue7.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue7.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue7.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue7.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue7.tooltip}"
id="it4">
<f:validator binding="#{row.bindings.ParamValue7.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="ParamValue8"
sortable="true"
headerText="#{bindings.CmProcessParamValueView11.hints.ParamValue8.label}"
id="c3" visible="false">
<af:inputText value="#{row.bindings.ParamValue8.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue8.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue8.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue8.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue8.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue8.tooltip}"
id="it2">
<f:validator binding="#{row.bindings.ParamValue8.validator}"/>
</af:inputText>
</af:column>
</af:table>
Backing Bean Code:
DCBindingContainer dcBindings=(DCBindingContainer)getBindings();
DCIteratorBinding dcIterator=dcBindings.findIteratorBinding("CmProcessParamValueView1Iterator");
RowSetIterator rs = dcIterator.getRowSetIterator();
System.out.println("In Cancel Row Count is : "+ rs.getRowCount());
if (rs.getRowCount() > 0) {
Row row = rs.first();
row.refresh(Row.REFRESH_UNDO_CHANGES);
row.remove();
while (rs.hasNext()) {
int count = rs.getRowCount();
System.out.println("Count is : "+ count);
Row row = rs.next();
System.out.println("Row === "+ row);
if(row != null){
row.refresh(Row.REFRESH_UNDO_CHANGES);
row.remove();
Thanks.

Issue resolved.
remove selectionListener and selectedRowKeys....
code to get all the selectedRows.
RowSetIterator rs = dcIterator.getRowSetIterator();
RowKeySet rks = this.t1.getSelectedRowKeys();
Iterator rksIter = rks.iterator();
while (rksIter.hasNext()) {
List l = (List) rksIter.next();
Key key = (Key)l.get(0);
Row row = rs.getRow(key);
Thanks.

Recording from tape

When uploading from a camera to onestep dvd, it stops recording and finishes the dvd if there is a blank spot in the tape. Any thoughts?

You can't use one the step feature w/in iDvd directly from the camera if there is an actual time code break on the tape.
Suggestion: you may still be able to use the one step option from a QT Folder or File (as opposed to the camera) prepared beforehand w/o any time code breaks within the video.
Hope this helps but if not come on back.

Selecting records from DB table with out using internal tables

hi,
i need to retrieve values from a database table based on few fields and date as well. however, i need to check whether the date is less or equal to the current date and along with that i should get the appropriate record. how can i do that with out using internal table.
field1-----date---
11111----
20070219
11111--20070214 <---
11111----
20070205
in the above scenario i should get the second record
Regards,
Kranthi.

Try:
REPORT ztest MESSAGE-ID 00.
TABLES bkpf.
SELECT * FROM bkpf
UP TO 1 ROWS
WHERE budat <= sy-datum
ORDER BY budat DESCENDING.
ENDSELECT.
Rob

View detail records from interactive report with button press

Hi I want to create a intractive report that will have a + sign for the user to expand the detail region below the record.
Thanks.
PKP

thanks kartik,
I did exectly what is there in there. But I am having problem in display. I have put my application in
http://apex.oracle.com/pls/apex/f?p=44031:1
login as GUEST/password
select Company Accounts Management from Application Menu --> setup tab -> Companies from setup menu
the detail record is not displaying. correctly.

Deleting records from a table with 12 million records

We need to delete some records on this table.
SQL> desc CDR_CLMS_ADMN.MDL_CLM_PMT_ENT_bak;
Name Null? Type
CLM_PMT_CHCK_NUM NOT NULL NUMBER(9)
CLM_PMT_CHCK_ACCT NOT NULL VARCHAR2(5)
CLM_PMT_PAYEE_POSTAL_EXT_CD VARCHAR2(4)
CLM_PMT_CHCK_AMT NUMBER(9,2)
CLM_PMT_CHCK_DT DATE
CLM_PMT_PAYEE_NAME VARCHAR2(30)
CLM_PMT_PAYEE_ADDR_LINE_1 VARCHAR2(30)
CLM_PMT_PAYEE_ADDR_LINE_2 VARCHAR2(30)
CLM_PMT_PAYEE_CITY VARCHAR2(19)
CLM_PMT_PAYEE_STATE_CD CHAR(2)
CLM_PMT_PAYEE_POSTAL_CD VARCHAR2(5)
CLM_PMT_SUM_CHCK_IND CHAR(1)
CLM_PMT_PAYEE_TYPE_CD CHAR(1)
CLM_PMT_CHCK_STTS_CD CHAR(2)
SYSTEM_INSERT_DT DATE
SYSTEM_UPDATE_DT
I only need to delete the records based on this condition
select * from CDR_CLMS_ADMN.MDL_CLM_PMT_ENT_bak
where CLM_PMT_CHCK_ACCT='00107' AND CLM_PMT_CHCK_NUM>=002196611 AND CLM_PMT_CHCK_NUM<=002197018;
Thsi table has 12 million records.
Please advise
Regards,
Narayan

user7202581 wrote:
We need to delete some records on this table.
SQL> desc CDR_CLMS_ADMN.MDL_CLM_PMT_ENT_bak;
Name Null? Type
CLM_PMT_CHCK_NUM NOT NULL NUMBER(9)
CLM_PMT_CHCK_ACCT NOT NULL VARCHAR2(5)
CLM_PMT_PAYEE_POSTAL_EXT_CD VARCHAR2(4)
CLM_PMT_CHCK_AMT NUMBER(9,2)
CLM_PMT_CHCK_DT DATE
CLM_PMT_PAYEE_NAME VARCHAR2(30)
CLM_PMT_PAYEE_ADDR_LINE_1 VARCHAR2(30)
CLM_PMT_PAYEE_ADDR_LINE_2 VARCHAR2(30)
CLM_PMT_PAYEE_CITY VARCHAR2(19)
CLM_PMT_PAYEE_STATE_CD CHAR(2)
CLM_PMT_PAYEE_POSTAL_CD VARCHAR2(5)
CLM_PMT_SUM_CHCK_IND CHAR(1)
CLM_PMT_PAYEE_TYPE_CD CHAR(1)
CLM_PMT_CHCK_STTS_CD CHAR(2)
SYSTEM_INSERT_DT DATE
SYSTEM_UPDATE_DT
I only need to delete the records based on this condition
select * from CDR_CLMS_ADMN.MDL_CLM_PMT_ENT_bak
where CLM_PMT_CHCK_ACCT='00107' AND CLM_PMT_CHCK_NUM>=002196611 AND CLM_PMT_CHCK_NUM<=002197018;
Thsi table has 12 million records.
Please advise
Regards,
NarayanDELETE from CDR_CLMS_ADMN.MDL_CLM_PMT_ENT_bak
where CLM_PMT_CHCK_ACCT='00107' AND CLM_PMT_CHCK_NUM>=002196611 AND CLM_PMT_CHCK_NUM<=002197018;

Java.sql : Cannot retrieve records from Oracle 9i with JDK 1.5

I think I'm doing everything right, but still the following code does not
return any rows. I have the classpath set correctly and ojdbc14.jar in
the path. I'm using jdk 1.5.
What am I missing? Any help greatly appreciated. Thanks!
     Connection conn = null;
     String serverName = "MySvr";
     String portNumber = "1521";
     String sid = "mySID";
     String myURL = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
     logger.writeLog("URL: " + myURL);
     String username = "scott";
     String password = "tiger";
     String query = "select 'test' from dual";
     DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
     conn = DriverManager.getConnection(myURL, username, password);
     Statement stmt = conn.createStatement();
     rs = stmt.executeQuery(query);
     logger.writeLog("Cur Row : " + rs.getRow());
-----> returns 0
     while (rs.next()) {
------> throws java.lang.NullPointerException
     }

I think I'm doing everything right, but still the following code does not
return any rows. JDBC didn't change from 1.4 to 1.5, so that's a red herring. It's you, not the JVM.
I have the classpath set correctly Really? A system CLASSPATH environment variable? I'd say that's wrong. Better to use the -classpath option on javac.exe when you compile and java.exe when you run.
and ojdbc14.jar in the path. You'd better mean CLASSPATH and not PATH. CLASSPATH is for the Java class loader; PATH is for the operating system. Don't get the two confused.
I'm using jdk 1.5.     Irrelevant here.
What am I missing? Any help greatly appreciated. Thanks!I think you're using ResultSet incorrectly, because it's never null.
Try this:
// I'd externalize this so you could change it on the fly.
String driver = "oracle.jdbc.driver.OracleDriver";
String url = "jdbc:oracle:thin:@MySvr:1521:mySID";
// I hope you're not using the default username and password for real
String username = "scott";
String password = "tiger";
logger.writeLog("URL: " + url);
Connection conn = null;
Statement stmt = null;
ResultSet rs = null;
try
    Class.forName(driver);
    conn = DriverManager.getConnection(url, username, password);
    String sql = "select 1 from dual";
    stmt = conn.createStatement();
    rs   = stmt.executeQuery(sql);
    int value;
    while (rs.next())
        value = rs.getInt(1);
catch (SQLException e)
    e.printStackTrace();
finally
    // I'd put all these in a utility class
    try { if (rs != null) rs.close(); } catch (SQLException e) { logger.writeLog("could not close result set"); }
    try { if (stmt != null) stmt.close(); } catch (SQLException e) { logger.writeLog("could not close statement"); }
    try { if (conn != null) conn.close(); } catch (SQLException e) { logger.writeLog("could not close connection"); }
}Note: close your resources in a finally block. It's important, especially if you don't want to run out of Oracle cursors.
%

How to transfer records from old computer with Elements 7 to new computer with Elements 13

How or what is the best way to transfer all material from Elements 7 on an old computer to Elements 13 on a new computer.

Many thanks Michel, all now transferred to new computer and current Elements 13.
Cheers
Peter

Recording from Vinyl Tapes to Zen Visio

1 ) Is it possible to transfer music directly from my Vinyl Cassettes to Zen Vision M (60GB)?
2) Can I use External mic for voice recording instead of inbuilt mic?
Any special accessories required for the above tasks and their availability (Creative or otherwise)
R D SAMANT

You will need a digital audio player with a line in to be able to record from tape or from vinyl or any other external source. Vision M does not have this. Ditto for an external mic.
The JB and JB3 have line in capability. JB3 is still a favorite of the taping community.
I also use one in my turntable setup, recording to it from an amp output. This is a VERY convenient way of digitizing my old vinyl.
jake

Help with listing records from two tables

Hi: I have two tables joined by the first field. The field is primary key in first table. Need help listing records from both tables with each record one line/record.
create table EVENTS (
event_key varchar2(64) primary key,
event_description varchar2(64),
create_time int
create table EVENT_UPDATES (
event_key varchar2(64) NOT NULL ,
update_description varchar2(64),
update_time int
insert into EVENTS values('Event1', 'This is event1', 1);
insert into EVENT_UPDATES values('Event1', 'Ticket created', 3);
insert into EVENT_UPDATES values('Event1', 'Event cleared', 10);
insert into EVENTS values('Event2', 'This is event2', 4);
insert into EVENT_UPDATES values('Event2', 'Ticket created', 6);
insert into EVENT_UPDATES values('Event2', 'Event cleared', 8);I want to print each record in EVENTS table as one line and corresponding records in EVENT_UPDATES as one line/record like this
Event1   1     This is event1
            3     Ticket created
            10   Event cleared
Event2   4     This is event2
            6     Ticket created
            8     Event clearedTIA
Ravi

select case weight
          when 1 then event_key
        end key,
        time_val,
        description
from (
          select event_key,
                  create_time time_val,
                  event_description description,
                  1 weight
            from events
         union all
          select event_key,
                  update_time,
                  update_description,
                  2 weight
            from event_updates
order by event_key,
           weight
KEY          TIME_VAL DESCRIPTION
Event1              1 This is event1
                    3 Ticket created
                   10 Event cleared
Event2              4 This is event2
                    6 Ticket created
                    8 Event cleared
6 rows selected.
SQL> SY.

Recording from tape player with line-in feat

Similar Messages

Maybe you are looking for