Recording from vinyls
I have a turntable connected to a pre amp connected to the audio line in port of my imac. The signal is good as you say - but likewise no sound.
Have you found out how to get sound output?
I want to record my vinyls - do you have any tips on digitizing and recording? I don't know where to start.
Do I use Garage Band - if so how? If I use Final Vinyl - downloaded free - do I need a griffin iMic?
Margaret
You can achieve what you want by using Sound Studio. It is shareware, but not very expensive. I have been using it for quite some time now.
All you need to do is connect your turntable to the preamp, then connect the line-in cable to your Mac. Open Sound Studio and one of the options is to listen while recording.
I tried just about all the freeware software before deciding Sound Studio was the way to go.
Once you have your tracks in Sound Studio, you can export them to iTunes for burning to CD.
Cheers
NikkiG
Similar Messages
-
Removing pops and clicks in MP3s recorded from vinyl??
I have some mp3s recorded from vinyl. I would like to know of any good software to take those mp3s and remove any pops/clicks/noise. I'm willing to pay for some good software. Please let me know what to look for, as I've never used any software to alter my songs.
Thanks,
BryanHi
There is a very good free-ware program called Audacity which has quite a good noise removal tool. You first profile the noise by selecting a section of just noise then get it to remove it, works quite well. As for clicks and pops in the old days when I used to edit quarter inch tape if you recorded a vinyl at 15 inches per second onto the tape you could actually edit out the click or pop with no discernible gap in the music. With audacity you could zoom right in and cut the clicks and pops out laborious I know. But trying to filter them doesn't work very successfully unless you are prepared to throw very large sums of money and use one of the devises or software made by somebody like Cedar.
Audacity can be found at VersionTracker.Com
Phil -
Mac Mini, Audacity and recording from vinyl and CD
I'd like to record some of my vinyl and CD collection but I've tried following the Audacity instructions but I can't get them to work. Either I don't seem to have the right Line In / Line Out or I seem to have everything right but it just doesn't work.
I play my vinyl and CDs on separates that are hooked up to my mac via an R8 Jack (?). Is it possible to use audacity to record from them?Hi, what is an R8 jack? Do your devices output Line level?
Audio in/optical audio in port ...
The Audio In port accommodates both digital optical input and analog audio input.
Analog audio line input is accepted through a 3.5mm mini phone jack. The sound input port accepts line-level stereo signals up to 24-bit stereo 44.1-192kHz sampling rate. It also accepts a stereo miniplug-to-RCA cable adapter for connecting stereo equipment to the computer.
Optical audio input is SPDIF format and uses a standard TOSLINK cable with a TOSLINK mini-plug adapter, accepting up to 24-bit stereo and 44.1-96kHz sampling rate.
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there. -
Recording from Vinyl Tapes to Zen Visio
1 ) Is it possible to transfer music directly from my Vinyl Cassettes to Zen Vision M (60GB)?
2) Can I use External mic for voice recording instead of inbuilt mic?
Any special accessories required for the above tasks and their availability (Creative or otherwise)
R D SAMANTYou will need a digital audio player with a line in to be able to record from tape or from vinyl or any other external source. Vision M does not have this. Ditto for an external mic.
The JB and JB3 have line in capability. JB3 is still a favorite of the taping community.
I also use one in my turntable setup, recording to it from an amp output. This is a VERY convenient way of digitizing my old vinyl.
jake -
Recording from vinyl directly onto m
Had a quick look thru the FAQ's and didn't see an answer to this question, but apologies if it has been discussed before.
I've heard that it's possible to record an analogue signal (in my case vinyl records from my hi-fi) directly onto a Creative mp3 player. is this true? One one external website they mentioned that the MuVo can do this - all that is needed is an adaptor for the Creative line-in jack to accomodate the standard input from a hi-fi amplifier...
Would appreciate any tips, advice etc on how to do this, which Creative models support this and any extra hardware/software required.
many thanksI don't think that recording direct to the player- is this what you're talking about?- is the best way to go.
Personally, I would just go and download the albums you have- owning the vinyl makes it legal for you to download the song from a peer to peer network.
If you're hell-bent on transferring them, going table to computer is the way you'll want to do it. Now, if I'm not mistaken, a phono signal isn't a perfect line-level, so you'll need to compensate with the recording level on the computer. Unless you have a top-of-the line sound card with RCA jacks connected to a dri'vebay component, you'll need a /8'' to stereo RCA adapter, which you can find at almost any electronics store that carries adapters.
In my opinion, the best program to use to record audio is Audacity, which you can download for free at http://audacity.sourceforge.net . Audacity will let you export directly to MP3 after you point it in the direction of the LAME encoder's DLL, which is included with many players. Chances are you have one of them already. -
Listening to Line In Audio/Recording from Vinyl
I'm not sure where exactly to post this, but I'm guessing it is a software issue with OS X. I was just given an old record player (Miracord) and receiver (harmon/kardon 330c) and I've got it all hooked up correctly (or so I think, record player > receiver > Tape Out RCA > RCA to 1/8" jack cable > iMac Line In). Under "Sounds" in system pref it does show some volume being I play a record. I play a record and hit record in garageband and Audacity I hear nothing but it does record and on playback it sounds like it is supposed to. Why can't I hear the audio as it is played through the line in imput? Also any thoughts/tips on recording form vinyl on a mac would also be appreciated. Thanks.
DaveHi Derato!
You are doing it the right way, as far as I can see, and exactly the same as I did getting some old family recordings on tape cassettes on to my hard disk for burning on a CD.
In Audacity, did you click 'monitor input'? Otherwise you won't hear a thing! -
Hi,
I have an iMac 2 ghz running OS 10.4.6. I'd like to record some vinyl albums on my computer so that I can play them in iTunes or convert them to CD. Years ago I did this with some RCA cables hooked up to my computer and my amp and a little program called Coaster. That was back in the days of OS 9. Now that I'm running Tiger, is there a good piece of software, preferably freeware that will do the job. Maybe GarageBand does it?
Sincerely,
JimIf you are after something free you could try Audacity. However I would recommend Sound Studio, it's an excellent audio program for the Mac and will save in AAC, MP3, AIFF and a number of other formats. You can download a trial version here: Sound Studio
-
Recording from vinyl and normalizing?
Hey everyone, just signed up as I use this quite a bit and thought I'd firstly say thanks to everyone for putting that effort in and being helpfull.
I have been recording my old vinyl collection (Old Skool Garage woo!) and have been normalizing the recorded regions in the audio edit window through the factory drop down menu. The parts are always highlighted and has been working fine. (also read about normalizing and how its not cool to use it, but its a habit and will have to read up more before I stop!) Anyways, this particular recorded audio region will refuse to be normalized and I'm just wondering if anyone had any pointers.
Thanks again in advance,
BillThanks for the quick reply,
I tried the search peak function but couldn't find any, I have 4 different audio regions that have been cut up from one take. All of them won't let me normalize them. I have used the same arrange window to record the tracks before these. I have just been deleting the audio once I have bounced them then recording the next one.... -
Importing from vinyl and tapes
I am about to buy my first iPod, a shuffle. What is the best way to import music from vinyl records, and cassette tapes? How do I do it exactly?
A lifetime of music and recrded material to be transfered.
Thanks.One way is to connect your Turntable/Cassette deck (through the Tape out sockets of your amplifier) to the audio in socket of your computer. On the computer you'll need audio editing software to capture and edit the resulting long file into individual tracks that can be added to the iTunes Library. There are a number of commercial programs for this (I use Sound Studio for the Mac but there are Windows programs). If want to try out the process first you could try the open source program Audacity which has Linux, Mac and Windows versions at this link: Audacity
In addition to the software you'll need RCA to 3.5 mm audio plug cables to connect the Tape Out sockets of your amplifier to the audio inputs of your computer. There's a short guide to recording here: How to record from vinyl and cassette to a computer also from the BBC Copying Vinyl Recordings to CD
If your Mac or PC hasn't got an audio in socket you can have a look at the Griffin iMic which connects to a USB port and comes with some software of it's own: iMic USB audio interface -
I have many MP3 songs I recorded from my vinyl albums on my ITouch 4. I lost my library in ITunes. How do I transfer my MP3 songs from my ITouch back into ITunes
I have many MP3 songs I recorded from my vinyl albums on my ITouch 4. I lost my library in ITunes. How do I transfer my MP3 songs from my ITouch back into ITunes
-
Hi, Have recorded tracks from vinyl on my iMac using garageband but only get sound through one speaker on playback. Connection is from amplifier to iMac via headphone jack socket and "audio-in". Vinyl player produces sound in left and right speakers so no prblem with sound source. What am I doing wrong?
thanksYes, headphones work ok. Could it be anything to do with setting up Garageband settings for recording? I noticed that recording level for right channel was slightly lower than left channel for all recordings and compensating with settings on amplifier had no effect.
-
Can i record music from vinyl records to iPad via usb turntable?
I have an old desktop PC but recently purchased an iPad and was wondering if I plugged in my usb turntable, could I record songs from vinyl records to the iPad? If so what app would be best?
This is a classic task for a computer. One I used to do frequently. I used the Amadeus application to record and, where necessary, edit the music. The application can filter the recorded tracks to eliminate clicks and hiss among other things. I then saved the files and imported them into iTunes. From there I could do anything that iTunes let's me do such as burn CDs, use the music in videos and of course copy them to an iPod, iPad or iPhone.
-
When I record from my old records, all goes well, except when I want to stop recording at end of a track, the stop square icon is inacti've and doesn't stop. I spose it would record the whole album side, but I want to divide the tracks.
Any suggestions?Lots of times the headphone jack isn't the same level or impedance as a true line level output, so overdriving and distortion may be a problem. Depends on the particular player. A "set-top" type player has line out jacks and would probably sound a lot better in the end. I've gone through changing all my tapes to music CDs and it was well worth it in the end. Now on to the vinyl, then the laser discs.
-
When recording from a cassette player (into an mp3), is the "line out" from the player the same as the headphone jack or do I need to get a different cassette player.
Lots of times the headphone jack isn't the same level or impedance as a true line level output, so overdriving and distortion may be a problem. Depends on the particular player. A "set-top" type player has line out jacks and would probably sound a lot better in the end. I've gone through changing all my tapes to music CDs and it was well worth it in the end. Now on to the vinyl, then the laser discs.
-
Recording from turntables into logic?
DJs! or anyone else that knows... i want to record a mix onto my laptop from vinyl turntables. ie about 60 mins worth. is logic stable enough to handle recording straight into it for this long? or can anyone recommend a free recording application to do this. doesn't matter how simple it is as i can edit it after - it just needs to not crash. most of the ones on the net seem to charge which seems crazy because i used to have a decent free one back on OS9!
thanks all...should be fine..
Just adjust your maximum recording time by hitting "a" (audio/set audio record path)
Maybe you are looking for
-
Photoshop CS6 Stuck on Hand Tool in ACR & PS with Mac/ Mountain Lion
Photoshop CS6 gets stuck in "hand mode" after being open for a few hours. Suddenly, I can't use liquefy because Photoshop gets stuck in hand mode. I can't use ACR to the full potential because I can't use the adjustment brush because all I have is th
-
I created a .dmg (disk image) in iDVD containing a movie and a folder of photos in the DVD-ROM section. I burned the DVD in Toast (8.0 I think)because it makes it so easy to do mass copies. My .dmg when mounted on my desktop contains the folder of ph
-
Problem with serial numbers for Lightroom 5
I bought a physical copy of Lightroom 5, 38 days ago. As my Mac doesn't have a CD driver, I downloaded the 30 days trial version on Adobe website and now my trial time is over I try to enter the serial number I had with the physical package I bought
-
Can I do a full restore to move from iPad 1 to iPad 4?
my iPad 1 will not upgrade to ios 6. So I am not sure if I can do a full restore to move over all my apps and settings the easy way. Or, if I have to move them manually. Thanks,
-
Qosimo G20: Wlan WEP settings not possible running Config free?
Hi! I have a Qosimo G20 running XP media center as OS. Default Toshiba ConfigFree is installed. Tried to find out how to set WEP key, but trying to do so in network config/settings task was halted with a message. This message referring to Microsoft K