Recording in the dark, Nokia N8
Tried recording a video last night in the dark, no lights on what-so-ever. The video recorded fine, perfect sound but couldn't see a thing. Obviously didn't get to see what I tried to video. Is there a function on the phone where the light on the phone will function, so I can actually view my video? Cheers
if you can't see it in the viewfinder (screen) it's not going to come out in the actual recording.
The Xenon flash cannot be used as a lightsource. Besides the fact that this will probably heat the device too fast, the power consumption would make it impractical.
640K Should be enough for everybody
El_Loco Nokia Video Blog
Similar Messages
-
Nokia N97 Camera Flash In The Dark
My N97 is already currently being repaired in a Nokia Service Centre however not for this reason, i have just remembered that when i take a photo in the black or in the dark outside, and i use the flash, it takes the photo and most times not always you see a like white blob down the left side of the photo, anyone know why? or if this can be fixed? and if so how do i contact Nokia Service to tell them to repair it?
I didn't need any paperwork, i don't think you should.
It is a well known problem with the N97, if you do need anything, you may need a photo on your phone to show the problem or be able to show the scratches on the camera but you may not need to do that, just tell them your problem and it will click for them what it is as they replace them everyday now.
Obviously how quick he can do it, depends on how much work that dealer has, but with me he said it would be done within 30minutes, any longer and he would drop it home for me.......great customer service -
Shot in the dark - Accessing page records outside the component buffer
I know this is a shot in the dark, but I'm hoping there is some trick someone has found that allows an iScript to make use of or imitate the function 'GetRecord'. I understand the limitations of an iScript and the reasons why it has no access to things like 'GetRecord', but I'm trying to manipulate field display options from code executing in an iScript. Has anyone found a way to interact with fields on a page through peoplecode in an iScript?
thanks,
PaulFolks,
This question has been solved by myself. Thanks. -
How Do I Contact the REAL Nokia Company ..
Please help, someone .. anyone !! I cannot get any help from Nokia USA because ... well, here is my story, and I am sorry if I chose the wrong forum. I am not quite sure where to post this.
I will try to make this VERY LONG story, as short as possible.
I sent my phone to Nokia [USA] for a repair on 1/5/2007 [just a few days after receiving it.] I couldn't find a reason why the phone was locking up and I couldn't find a solution to repair it .. Apparently I am not the only one that couldn't figure it out .. The repair center I sent the phone to couldn't either.
On 2/2/2007, after dozens and dozens of repair status inquiries, many hours on the phone with Nokia USA, the EXECUTIVE SOLUTIONS DEPARTMENT tells me that Nokia Repair could NOT fix my phone. It is a hardware issue and repair has NO PARTS and NO REPLACEMENT phones ... WHAT ???
The N93 is for sale on the Nokia USA website. Every once in a while the website reports it out of stock, but as of Friday when I get the news that there are no parts and no phones to fix or replace mine, I check the site and see they ARE IN STOCK - AND TAKING ORDERS FOR IMMEDIATE SHIPPING ...
I ask that the EXECUTIVE SOLUTIONS TEAM get me one of those phones. NO CAN DO ... they say. AND, Nokia repair can not have the sales department's phones either. Why is this ???
So today I did some investigating. Nokia Repair USA is NOT REALLY NOKIA REPAIR, it is some company called Palco. They are in Alabama and they cannot repair my phone because they have no parts and they cannot replace my phone [as stated in my warranty] because they have no phones. I talked to Palco today and the woman tells me that parts and phones have been on order for months and I guess since Palco does MUCH MORE than just repair phones for Nokia - the phones they receive from Nokia customers that they cannot fix for one reason or another are just tossed in a pile and forgotten. I guess it is not a big concern of theirs .. They just email Nokia USA and tell them - Sorry, we can't fix this phone. END OF STORY.
Nokia Executive Solutions Department says - We will have to mail you a refund because we have NO WAY of replacing your phone. END OF STORY.
Which leads me to believe, like I have for weeks now, that Nokia USA support, Nokia USA customer service and Nokia EXECUTIVE Solutions USA, are different companies contracted by Nokia to SHUT THE CUSTOMER UP. Apparently they aren't the ones who do the actual refund. I don't know where the refunds come from, but I was PROMISED, I will get a refund.
I WANT MY PHONE!
So ... this is why I want to get in touch with the REAL Nokia company. I want a N93 and I want to get it from Finland or wherever the REAL company is.
One of the reps at Nokia USA Executive solutions USA said the name, Palco when we were talking about the repair so when I got off the phone with him, I looked up Palco on the internet and sure enough, the address I sent my phone to, is the same address as Palco. So I called them.
There was NOTHING on Palco's recorded message that even mentioned cellphone repair. It talked IT Sales and service and a whole lot more, but NOTHING NOKIA and NOTHING CELLPHONE .. I pushed O for an operator and she connected me to - the person who handles Nokia phone repairs.
Before I send Nokia USA anything to get my refund under way, I want to try and reach the REAL nokia in Finland or wherever they are and see if I can get a replacement phone! I almost forgot to mention. If I go the route, it will take SIX WEEKS to process. Can someone please give me some advise?
Sorry for rambling. Hope you can follow me .. I know I jump around a lot. I am just so frustrated.
DianeThe address for Nokia's Head Office for the US is :
Nokia Americas
6000 Connection Drive
Irving, Texas
75039
USA
Tel. +1 972 894 5000
and this information can be found here :
http://www.nokia.com/link?cid=EDITORIAL_4546
One word of advice - Nokia is HUGE - give them a call first and get the name of someone or at least a department that you can address your letter to or it will get lost in the myriad of letters that Nokia get everyday.
NSCs (Nokia Service Centres) in the UK are also run by 3rd party companies, as I suspect most of them round the world are. For want of a better expression Nokia outsource this facility to 3rd party companies and then get the blame when it all goes wrong (!).
In the UK we have a facility called Club Nokia where can we can report issues directly to Nokia relating to this as well as carry out tasks like product registration however I've just had a look on the US website and there doesn't appear to be this facility for the US - each task has it's own webpage.
As to these forums, please remember that although you will see various Nokia administrators etc. they are simply here to ensure everyone plays nice rather than offering any form of official help or support, and that these forums are a user to user help forum - i.e. I'm a direct end user of Nokia products exactly as you are !
Anyway, good luck - let me know if you need any further help.
Regards,
Edward -
OK, I'm perplexed. I've been a mac user for almost 30 years. My entire ecosystem is Mac and I remained with mac through the dark 90s. What apple has does in the past 2 years is unbelieveable. I just upgraded to 10.86, then 10.9, no end of problems.
I can no longer mirror and of my monitors VGA or HDMI, my itunes which supplies iphone and ipad has disabled podcast app so that I can't listen to my favorite programs and I find out after the fact that Office software is not compatible with OSX 8.6.
Forget about the fact that itunes looks like it was developed by a 1980s MS-DOS programmer. Its kludgy, limited and generally does not work.
What does one do? Frankly, I used to use macs because they were like info appliances that just worked. Now the time to manage tech glitches from the company has become way too costly. Sadly, Apple has become Microsoft and Microsoft seems to become Apple."... as do the users who are downloading recent OSXs in record numbers."
USUALLY YOU DO NOT KNOW WHAT YOU DOWNLOAD UNTIL YOU HAVE IT !!!
APPLE USED TO HAVE GREAT STUFF BUT OBVIOUSLY TRIES TO INVENT FOR THE SAKE OF INVENTING !!!
THIS IS ACTUALLY A STEP BACKWARDS (TO MS).
CALENDAR & CONTACTS SYNC VIA ICLOUD ONLY IS AN ABSOLUTE NO GO !!!
@APPLE: FIX THIS ASAP !!! -
Video Recording Stutter + Vertical Dark line appea...
The phone is less than two weeks old. I only started using the camera recently and the stuttering problem others described here is happening to me device. Also, the major problem I see now is the dark link appearing while in standby and during recording. It doesn't always come up but it happens a lot. Please view the video here:
http://yfrog.com/6c31052010011z
Did this happen to anybody else ? is it definitely a hardware problem ?
This is a link to the whole video btw..
http://img228.imageshack.us/img228/6223/3105201001 1.mp4Looks like some kind of scale. I assume your device is still under warranty. Bring it in at your retailer.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
ATI oss color space compressed in the dark shades of gray
With the arrival von linux 3.13 to [core] I switched from catalyst to the open source drivers, as they finally provide a sufficient performance. My only problem now is that the colorspace is compressed for gray values below 16 (that means every shade of gray having values of 0 to 16 look just black). That's only the case for my HDMI-output connected to my TV, which worked without problems with the catalyst drivers. Also, only the dark grays are compressed, the near-white grays show up correct.
In the wiki I found a xrandr-command "--set "Broadcast RGB" "Full"", which can be used with chips from Intel. Is there something similar for the open source ati drivers?That's just outputting the options "load detection", "dither", "audio", "underscan vborder", "underscan hborder", "underscan" and "coherent" for both my monitor and TV - are these really all? Here's the full output:
$ xrandr -q --verbose
Screen 0: minimum 320 x 200, current 2560 x 1440, maximum 16384 x 16384
DisplayPort-0 connected 2560x1440+0+0 (0x59) normal (normal left inverted right x axis y axis) 597mm x 336mm
Identifier: 0x55
Timestamp: 2366135
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0010ac57a04c543930
34140104b53c22783a8e05ad4f33b026
0d5054a54b008100b300d100714fa940
818001010101565e00a0a0a029503020
350055502100001a000000ff00473630
365430434f3039544c0a000000fc0044
454c4c2055323731310a2020000000fd
0031561d711e000a202020202020012d
02031df1509005040302071601061112
1513141f20230d7f07830f0000023a80
1871382d40582c250055502100001e01
1d8018711c1620582c25005550210000
9e011d007251d01e206e285500555021
00001e8c0ad08a20e02d10103e960055
50210000180000000000000000000000
0000000000000000000000000000004b
dither: off
supported: off, on
audio: auto
supported: off, on, auto
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
coherent: 1
range: (0, 1)
2560x1440 (0x59) 241.5MHz +HSync -VSync *current +preferred
h: width 2560 start 2608 end 2640 total 2720 skew 0 clock 88.8KHz
v: height 1440 start 1443 end 1448 total 1481 clock 60.0Hz
1920x1200 (0x5a) 193.2MHz -HSync +VSync
h: width 1920 start 2056 end 2256 total 2592 skew 0 clock 74.6KHz
v: height 1200 start 1203 end 1209 total 1245 clock 59.9Hz
1920x1080 (0x5b) 148.5MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1082 end 1087 total 1125 clock 60.0Hz
1920x1080 (0x5c) 148.5MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz
1920x1080 (0x5d) 148.5MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.2KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.0Hz
1920x1080 (0x5e) 148.4MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.4KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.9Hz
1920x1080i (0x5f) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.8KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.1Hz
1920x1080i (0x60) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.1KHz
v: height 1080 start 1084 end 1094 total 1125 clock 50.0Hz
1920x1080 (0x61) 74.2MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 27.0KHz
v: height 1080 start 1084 end 1089 total 1125 clock 24.0Hz
1920x1080i (0x62) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.7KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.0Hz
1920x1080 (0x63) 74.2MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 27.0KHz
v: height 1080 start 1084 end 1089 total 1125 clock 24.0Hz
1600x1200 (0x64) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1680x1050 (0x65) 146.2MHz -HSync +VSync
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
1280x1024 (0x66) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x67) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1280x800 (0x68) 83.5MHz +HSync -VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.7KHz
v: height 800 start 803 end 809 total 831 clock 59.8Hz
1152x864 (0x69) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x6a) 74.2MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.0KHz
v: height 720 start 725 end 730 total 750 clock 60.0Hz
1280x720 (0x6b) 74.2MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1280x720 (0x6c) 74.2MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.0KHz
v: height 720 start 725 end 730 total 750 clock 59.9Hz
1440x576i (0x6d) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 50.1Hz
1024x768 (0x6e) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6f) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
1440x480i (0x70) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1478 end 1602 total 1716 skew 0 clock 15.8KHz
v: height 480 start 488 end 494 total 525 clock 60.1Hz
1440x480i (0x71) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1478 end 1602 total 1716 skew 0 clock 15.7KHz
v: height 480 start 488 end 494 total 525 clock 60.1Hz
800x600 (0x72) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x73) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
720x576 (0x74) 27.0MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.2KHz
v: height 576 start 581 end 586 total 625 clock 50.0Hz
720x480 (0x75) 27.0MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHz
v: height 480 start 489 end 495 total 525 clock 60.0Hz
720x480 (0x76) 27.0MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHz
v: height 480 start 489 end 495 total 525 clock 59.9Hz
640x480 (0x77) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x78) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
640x480 (0x79) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
720x400 (0x7a) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
HDMI-0 connected (normal left inverted right x axis y axis)
Identifier: 0x56
Timestamp: 2366135
Subpixel: horizontal rgb
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0034a9a6a001010101
00140103800000780adaffa3584aa229
17494b00000001010101010101010101
010101010101023a80d072382d40102c
4580ba882100001e023a801871382d40
582c4500ba882100001e000000fc0050
616e61736f6e69632d54560a000000fd
00173d0f440f000a20202020202001d1
02032672509f90140520130412031102
16071506012309070168030c001000b8
260fe3051f01011d80d0721c1620102c
2580ba882100009e011d8018711c1620
582c2500ba882100009e011d00bc52d0
1e20b8285540ba882100001e011d0072
51d01e206e285500ba882100001e0000
000000000000000000000000000000c1
dither: off
supported: off, on
audio: auto
supported: off, on, auto
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
coherent: 1
range: (0, 1)
1920x1080 (0x5d) 148.5MHz +HSync +VSync +preferred
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.2KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.0Hz
1920x1080 (0x5c) 148.5MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz
1920x1080 (0x5e) 148.4MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.4KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.9Hz
1920x1080i (0x5f) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.8KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.1Hz
1920x1080i (0x60) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.1KHz
v: height 1080 start 1084 end 1094 total 1125 clock 50.0Hz
1920x1080 (0x61) 74.2MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 27.0KHz
v: height 1080 start 1084 end 1089 total 1125 clock 24.0Hz
1920x1080i (0x62) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.7KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.0Hz
1920x1080 (0x63) 74.2MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 27.0KHz
v: height 1080 start 1084 end 1089 total 1125 clock 24.0Hz
1280x720 (0x6a) 74.2MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.0KHz
v: height 720 start 725 end 730 total 750 clock 60.0Hz
1280x720 (0x6b) 74.2MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1280x720 (0x6c) 74.2MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.0KHz
v: height 720 start 725 end 730 total 750 clock 59.9Hz
1440x576i (0x6d) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 50.1Hz
1440x480i (0x70) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1478 end 1602 total 1716 skew 0 clock 15.8KHz
v: height 480 start 488 end 494 total 525 clock 60.1Hz
1440x480i (0x71) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1478 end 1602 total 1716 skew 0 clock 15.7KHz
v: height 480 start 488 end 494 total 525 clock 60.1Hz
720x576 (0x74) 27.0MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.2KHz
v: height 576 start 581 end 586 total 625 clock 50.0Hz
720x480 (0x75) 27.0MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHz
v: height 480 start 489 end 495 total 525 clock 60.0Hz
720x480 (0x76) 27.0MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHz
v: height 480 start 489 end 495 total 525 clock 59.9Hz
640x480 (0x78) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
640x480 (0x79) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
DVI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x57
Timestamp: 2366135
Subpixel: horizontal rgb
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
load detection: 1
range: (0, 1)
dither: off
supported: off, on
audio: auto
supported: off, on, auto
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
coherent: 1
range: (0, 1)
Just to emphasize this further: color space compression is not a problem on my monitor, but only on the TV. Setable options don't differ as you can see in the output above. Also, Xorg.0.log shows that the TV on HDMI-0 supports the RGB 4:4:4 encoding (just like the monitor does). Here's the full Xorg.0.log:
[ 2358.417]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2358.417] X Protocol Version 11, Revision 0
[ 2358.417] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2358.417] Current Operating System: Linux arch 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
[ 2358.417] Kernel command line: root=PARTUUID=97f3bf97-014d-4333-8092-e190efc8bd3f rootfstype=ext4 ro add_efi_memmap initrd=\EFI\arch\initramfs-arch.img
[ 2358.417] Build Date: 09 January 2014 08:47:24AM
[ 2358.417]
[ 2358.417] Current version of pixman: 0.32.4
[ 2358.417] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2358.417] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2358.417] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 3 16:25:06 2014
[ 2358.417] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2358.417] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2358.417] (==) No Layout section. Using the first Screen section.
[ 2358.417] (==) No screen section available. Using defaults.
[ 2358.417] (**) |-->Screen "Default Screen Section" (0)
[ 2358.417] (**) | |-->Monitor "<default monitor>"
[ 2358.417] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2358.417] (==) Automatically adding devices
[ 2358.417] (==) Automatically enabling devices
[ 2358.417] (==) Automatically adding GPU devices
[ 2358.417] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2358.417] Entry deleted from font path.
[ 2358.417] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2358.417] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2358.417] Entry deleted from font path.
[ 2358.417] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2358.417] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2358.417] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2358.417] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2358.417] (II) Loader magic: 0x804c80
[ 2358.417] (II) Module ABI versions:
[ 2358.417] X.Org ANSI C Emulation: 0.4
[ 2358.417] X.Org Video Driver: 15.0
[ 2358.417] X.Org XInput driver : 20.0
[ 2358.417] X.Org Server Extension : 8.0
[ 2358.417] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2358.418] (--) PCI:*(0:1:0:0) 1002:683f:1787:200b rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 2358.418] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2358.418] Initializing built-in extension Generic Event Extension
[ 2358.418] Initializing built-in extension SHAPE
[ 2358.418] Initializing built-in extension MIT-SHM
[ 2358.418] Initializing built-in extension XInputExtension
[ 2358.418] Initializing built-in extension XTEST
[ 2358.418] Initializing built-in extension BIG-REQUESTS
[ 2358.418] Initializing built-in extension SYNC
[ 2358.418] Initializing built-in extension XKEYBOARD
[ 2358.418] Initializing built-in extension XC-MISC
[ 2358.418] Initializing built-in extension SECURITY
[ 2358.418] Initializing built-in extension XINERAMA
[ 2358.418] Initializing built-in extension XFIXES
[ 2358.418] Initializing built-in extension RENDER
[ 2358.418] Initializing built-in extension RANDR
[ 2358.418] Initializing built-in extension COMPOSITE
[ 2358.418] Initializing built-in extension DAMAGE
[ 2358.418] Initializing built-in extension MIT-SCREEN-SAVER
[ 2358.418] Initializing built-in extension DOUBLE-BUFFER
[ 2358.418] Initializing built-in extension RECORD
[ 2358.418] Initializing built-in extension DPMS
[ 2358.418] Initializing built-in extension Present
[ 2358.418] Initializing built-in extension DRI3
[ 2358.418] Initializing built-in extension X-Resource
[ 2358.418] Initializing built-in extension XVideo
[ 2358.418] Initializing built-in extension XVideo-MotionCompensation
[ 2358.418] Initializing built-in extension XFree86-VidModeExtension
[ 2358.418] Initializing built-in extension XFree86-DGA
[ 2358.418] Initializing built-in extension XFree86-DRI
[ 2358.419] Initializing built-in extension DRI2
[ 2358.419] (II) "glx" will be loaded by default.
[ 2358.419] (II) LoadModule: "dri2"
[ 2358.419] (II) Module "dri2" already built-in
[ 2358.419] (II) LoadModule: "glamoregl"
[ 2358.419] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2358.420] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2358.420] compiled for 1.15.0, module version = 0.6.0
[ 2358.420] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2358.420] (II) LoadModule: "glx"
[ 2358.420] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2358.420] (II) Module glx: vendor="X.Org Foundation"
[ 2358.420] compiled for 1.15.0, module version = 1.0.0
[ 2358.420] ABI class: X.Org Server Extension, version 8.0
[ 2358.420] (==) AIGLX enabled
[ 2358.420] Loading extension GLX
[ 2358.420] (==) Matched ati as autoconfigured driver 0
[ 2358.420] (==) Matched ati as autoconfigured driver 1
[ 2358.420] (==) Matched modesetting as autoconfigured driver 2
[ 2358.420] (==) Matched fbdev as autoconfigured driver 3
[ 2358.420] (==) Matched vesa as autoconfigured driver 4
[ 2358.420] (==) Assigned the driver to the xf86ConfigLayout
[ 2358.420] (II) LoadModule: "ati"
[ 2358.420] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 2358.420] (II) Module ati: vendor="X.Org Foundation"
[ 2358.420] compiled for 1.15.0, module version = 7.3.0
[ 2358.420] Module class: X.Org Video Driver
[ 2358.420] ABI class: X.Org Video Driver, version 15.0
[ 2358.420] (II) LoadModule: "radeon"
[ 2358.420] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2358.420] (II) Module radeon: vendor="X.Org Foundation"
[ 2358.420] compiled for 1.15.0, module version = 7.3.0
[ 2358.420] Module class: X.Org Video Driver
[ 2358.420] ABI class: X.Org Video Driver, version 15.0
[ 2358.420] (II) LoadModule: "modesetting"
[ 2358.420] (WW) Warning, couldn't open module modesetting
[ 2358.420] (II) UnloadModule: "modesetting"
[ 2358.420] (II) Unloading modesetting
[ 2358.420] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2358.420] (II) LoadModule: "fbdev"
[ 2358.420] (WW) Warning, couldn't open module fbdev
[ 2358.420] (II) UnloadModule: "fbdev"
[ 2358.420] (II) Unloading fbdev
[ 2358.420] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2358.420] (II) LoadModule: "vesa"
[ 2358.420] (WW) Warning, couldn't open module vesa
[ 2358.420] (II) UnloadModule: "vesa"
[ 2358.420] (II) Unloading vesa
[ 2358.420] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2358.420] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 2358.423] (++) using VT number 7
[ 2358.423] (II) [KMS] Kernel modesetting enabled.
[ 2358.423] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2358.423] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 2358.423] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2358.423] (==) RADEON(0): Default visual is TrueColor
[ 2358.423] (==) RADEON(0): RGB weight 888
[ 2358.423] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 2358.423] (--) RADEON(0): Chipset: "VERDE" (ChipID = 0x683f)
[ 2358.423] (II) Loading sub module "dri2"
[ 2358.423] (II) LoadModule: "dri2"
[ 2358.423] (II) Module "dri2" already built-in
[ 2358.423] (II) Loading sub module "glamoregl"
[ 2358.423] (II) LoadModule: "glamoregl"
[ 2358.423] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2358.423] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2358.423] compiled for 1.15.0, module version = 0.6.0
[ 2358.423] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2358.423] (II) glamor: OpenGL accelerated X.org driver based.
[ 2358.452] (II) glamor: EGL version 1.4 (DRI2):
[ 2358.462] (II) RADEON(0): glamor detected, initialising EGL layer.
[ 2358.462] (II) RADEON(0): KMS Color Tiling: enabled
[ 2358.462] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 2358.462] (II) RADEON(0): KMS Pageflipping: enabled
[ 2358.462] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 2358.509] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 2358.572] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 2358.593] (II) RADEON(0): Output DVI-0 has no monitor section
[ 2358.644] (II) RADEON(0): EDID for output DisplayPort-0
[ 2358.644] (II) RADEON(0): Manufacturer: DEL Model: a057 Serial#: 809063500
[ 2358.644] (II) RADEON(0): Year: 2010 Week: 52
[ 2358.644] (II) RADEON(0): EDID Version: 1.4
[ 2358.644] (II) RADEON(0): Digital Display Input
[ 2358.644] (II) RADEON(0): 10 bits per channel
[ 2358.644] (II) RADEON(0): Digital interface is DisplayPort
[ 2358.644] (II) RADEON(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 2358.644] (II) RADEON(0): Gamma: 2.20
[ 2358.644] (II) RADEON(0): DPMS capabilities: Off
[ 2358.644] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 2358.644] (II) RADEON(0): First detailed timing is preferred mode
[ 2358.644] (II) RADEON(0): Preferred mode is native pixel format and refresh rate
[ 2358.644] (II) RADEON(0): redX: 0.678 redY: 0.309 greenX: 0.202 greenY: 0.689
[ 2358.644] (II) RADEON(0): blueX: 0.148 blueY: 0.051 whiteX: 0.313 whiteY: 0.329
[ 2358.644] (II) RADEON(0): Supported established timings:
[ 2358.644] (II) RADEON(0): 720x400@70Hz
[ 2358.644] (II) RADEON(0): 640x480@60Hz
[ 2358.644] (II) RADEON(0): 640x480@75Hz
[ 2358.644] (II) RADEON(0): 800x600@60Hz
[ 2358.644] (II) RADEON(0): 800x600@75Hz
[ 2358.644] (II) RADEON(0): 1024x768@60Hz
[ 2358.644] (II) RADEON(0): 1024x768@75Hz
[ 2358.644] (II) RADEON(0): 1280x1024@75Hz
[ 2358.644] (II) RADEON(0): Manufacturer's mask: 0
[ 2358.644] (II) RADEON(0): Supported standard timings:
[ 2358.644] (II) RADEON(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 2358.644] (II) RADEON(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2358.644] (II) RADEON(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 2358.644] (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 2358.644] (II) RADEON(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 2358.644] (II) RADEON(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2358.644] (II) RADEON(0): Supported detailed timing:
[ 2358.644] (II) RADEON(0): clock: 241.5 MHz Image Size: 597 x 336 mm
[ 2358.644] (II) RADEON(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 2358.644] (II) RADEON(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 2358.644] (II) RADEON(0): Serial No: G606T0CO09TL
[ 2358.644] (II) RADEON(0): Monitor name: DELL U2711
[ 2358.644] (II) RADEON(0): Ranges: V min: 49 V max: 86 Hz, H min: 29 H max: 113 kHz, PixClock max 305 MHz
[ 2358.644] (II) RADEON(0): Supported detailed timing:
[ 2358.644] (II) RADEON(0): clock: 148.5 MHz Image Size: 597 x 336 mm
[ 2358.644] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2358.644] (II) RADEON(0): v_active: 1080 v_sync: 1082 v_sync_end 1087 v_blanking: 1125 v_border: 0
[ 2358.644] (II) RADEON(0): Supported detailed timing:
[ 2358.644] (II) RADEON(0): clock: 74.2 MHz Image Size: 597 x 336 mm
[ 2358.644] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2358.644] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 2358.644] (II) RADEON(0): Supported detailed timing:
[ 2358.644] (II) RADEON(0): clock: 74.2 MHz Image Size: 597 x 336 mm
[ 2358.644] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2358.644] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2358.644] (II) RADEON(0): Supported detailed timing:
[ 2358.644] (II) RADEON(0): clock: 27.0 MHz Image Size: 597 x 336 mm
[ 2358.644] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2358.644] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2358.644] (II) RADEON(0): Number of EDID sections to follow: 1
[ 2358.644] (II) RADEON(0): EDID (in hex):
[ 2358.644] (II) RADEON(0): 00ffffffffffff0010ac57a04c543930
[ 2358.644] (II) RADEON(0): 34140104b53c22783a8e05ad4f33b026
[ 2358.644] (II) RADEON(0): 0d5054a54b008100b300d100714fa940
[ 2358.644] (II) RADEON(0): 818001010101565e00a0a0a029503020
[ 2358.644] (II) RADEON(0): 350055502100001a000000ff00473630
[ 2358.644] (II) RADEON(0): 365430434f3039544c0a000000fc0044
[ 2358.644] (II) RADEON(0): 454c4c2055323731310a2020000000fd
[ 2358.644] (II) RADEON(0): 0031561d711e000a202020202020012d
[ 2358.644] (II) RADEON(0): 02031df1509005040302071601061112
[ 2358.644] (II) RADEON(0): 1513141f20230d7f07830f0000023a80
[ 2358.644] (II) RADEON(0): 1871382d40582c250055502100001e01
[ 2358.644] (II) RADEON(0): 1d8018711c1620582c25005550210000
[ 2358.644] (II) RADEON(0): 9e011d007251d01e206e285500555021
[ 2358.644] (II) RADEON(0): 00001e8c0ad08a20e02d10103e960055
[ 2358.644] (II) RADEON(0): 50210000180000000000000000000000
[ 2358.644] (II) RADEON(0): 0000000000000000000000000000004b
[ 2358.644] (II) RADEON(0): Printing probed modes for output DisplayPort-0
[ 2358.644] (II) RADEON(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[ 2358.644] (II) RADEON(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync (67.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2358.644] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2358.706] (II) RADEON(0): EDID for output HDMI-0
[ 2358.706] (II) RADEON(0): Manufacturer: MEI Model: a0a6 Serial#: 16843009
[ 2358.706] (II) RADEON(0): Year: 2010 Week: 0
[ 2358.706] (II) RADEON(0): EDID Version: 1.3
[ 2358.706] (II) RADEON(0): Digital Display Input
[ 2358.706] (II) RADEON(0): Indeterminate output size
[ 2358.706] (II) RADEON(0): Gamma: 2.20
[ 2358.706] (II) RADEON(0): No DPMS capabilities specified
[ 2358.706] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2358.706] (II) RADEON(0): First detailed timing is preferred mode
[ 2358.706] (II) RADEON(0): redX: 0.640 redY: 0.345 greenX: 0.291 greenY: 0.635
[ 2358.706] (II) RADEON(0): blueX: 0.163 blueY: 0.093 whiteX: 0.288 whiteY: 0.296
[ 2358.706] (II) RADEON(0): Manufacturer's mask: 0
[ 2358.706] (II) RADEON(0): Supported detailed timing:
[ 2358.706] (II) RADEON(0): clock: 148.5 MHz Image Size: 698 x 392 mm
[ 2358.706] (II) RADEON(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 2358.706] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2358.706] (II) RADEON(0): Supported detailed timing:
[ 2358.706] (II) RADEON(0): clock: 148.5 MHz Image Size: 698 x 392 mm
[ 2358.706] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2358.706] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2358.706] (II) RADEON(0): Monitor name: Panasonic-TV
[ 2358.706] (II) RADEON(0): Ranges: V min: 23 V max: 61 Hz, H min: 15 H max: 68 kHz, PixClock max 155 MHz
[ 2358.706] (II) RADEON(0): Supported detailed timing:
[ 2358.706] (II) RADEON(0): clock: 74.2 MHz Image Size: 698 x 392 mm
[ 2358.706] (II) RADEON(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 2358.706] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 2358.706] (II) RADEON(0): Supported detailed timing:
[ 2358.706] (II) RADEON(0): clock: 74.2 MHz Image Size: 698 x 392 mm
[ 2358.706] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2358.706] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 2358.706] (II) RADEON(0): Supported detailed timing:
[ 2358.706] (II) RADEON(0): clock: 74.2 MHz Image Size: 698 x 392 mm
[ 2358.706] (II) RADEON(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2358.706] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2358.706] (II) RADEON(0): Supported detailed timing:
[ 2358.707] (II) RADEON(0): clock: 74.2 MHz Image Size: 698 x 392 mm
[ 2358.707] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2358.707] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2358.707] (II) RADEON(0): Number of EDID sections to follow: 1
[ 2358.707] (II) RADEON(0): EDID (in hex):
[ 2358.707] (II) RADEON(0): 00ffffffffffff0034a9a6a001010101
[ 2358.707] (II) RADEON(0): 00140103800000780adaffa3584aa229
[ 2358.707] (II) RADEON(0): 17494b00000001010101010101010101
[ 2358.707] (II) RADEON(0): 010101010101023a80d072382d40102c
[ 2358.707] (II) RADEON(0): 4580ba882100001e023a801871382d40
[ 2358.707] (II) RADEON(0): 582c4500ba882100001e000000fc0050
[ 2358.707] (II) RADEON(0): 616e61736f6e69632d54560a000000fd
[ 2358.707] (II) RADEON(0): 00173d0f440f000a20202020202001d1
[ 2358.707] (II) RADEON(0): 02032672509f90140520130412031102
[ 2358.707] (II) RADEON(0): 16071506012309070168030c001000b8
[ 2358.707] (II) RADEON(0): 260fe3051f01011d80d0721c1620102c
[ 2358.707] (II) RADEON(0): 2580ba882100009e011d8018711c1620
[ 2358.707] (II) RADEON(0): 582c2500ba882100009e011d00bc52d0
[ 2358.707] (II) RADEON(0): 1e20b8285540ba882100001e011d0072
[ 2358.707] (II) RADEON(0): 51d01e206e285500ba882100001e0000
[ 2358.707] (II) RADEON(0): 000000000000000000000000000000c1
[ 2358.707] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 2358.707] (II) RADEON(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz eP)
[ 2358.707] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2358.707] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2358.726] (II) RADEON(0): EDID for output DVI-0
[ 2358.726] (II) RADEON(0): Output DisplayPort-0 connected
[ 2358.726] (II) RADEON(0): Output HDMI-0 connected
[ 2358.726] (II) RADEON(0): Output DVI-0 disconnected
[ 2358.726] (II) RADEON(0): Using exact sizes for initial modes
[ 2358.726] (II) RADEON(0): Output DisplayPort-0 using initial mode 1920x1080
[ 2358.726] (II) RADEON(0): Output HDMI-0 using initial mode 1920x1080
[ 2358.726] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2358.726] (II) RADEON(0): mem size init: gart size :3fbde000 vram size: s:40000000 visible:3f1b0000
[ 2358.726] (==) RADEON(0): DPI set to (96, 96)
[ 2358.726] (II) Loading sub module "fb"
[ 2358.726] (II) LoadModule: "fb"
[ 2358.726] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2358.727] (II) Module fb: vendor="X.Org Foundation"
[ 2358.727] compiled for 1.15.0, module version = 1.0.0
[ 2358.727] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2358.727] (II) Loading sub module "ramdac"
[ 2358.727] (II) LoadModule: "ramdac"
[ 2358.727] (II) Module "ramdac" already built-in
[ 2358.727] (--) Depth 24 pixmap format is 32 bpp
[ 2358.727] (II) RADEON(0): [DRI2] Setup complete
[ 2358.727] (II) RADEON(0): [DRI2] DRI driver: radeonsi
[ 2358.727] (II) RADEON(0): [DRI2] VDPAU driver: radeonsi
[ 2358.727] (II) RADEON(0): Front buffer size: 8160K
[ 2358.727] (II) RADEON(0): VRAM usage limit set to 923097K
[ 2358.727] (==) RADEON(0): Backing store enabled
[ 2358.727] (II) RADEON(0): Direct rendering enabled
[ 2358.792] (II) RADEON(0): Use GLAMOR acceleration.
[ 2358.792] (II) RADEON(0): Acceleration enabled
[ 2358.792] (==) RADEON(0): DPMS enabled
[ 2358.792] (==) RADEON(0): Silken mouse enabled
[ 2358.792] (II) RADEON(0): Set up textured video (glamor)
[ 2358.792] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[ 2358.792] (II) RADEON(0): [XvMC] Extension initialized.
[ 2358.792] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2358.792] (--) RandR disabled
[ 2358.796] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2358.796] (II) AIGLX: enabled GLX_ARB_create_context
[ 2358.796] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2358.796] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2358.796] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2358.796] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2358.796] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2358.796] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2358.796] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2358.797] (II) AIGLX: Loaded and initialized radeonsi
[ 2358.797] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2358.833] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 2358.860] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2358.860] (**) Power Button: Applying InputClass "system-keyboard"
[ 2358.860] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2358.860] (**) Power Button: Applying InputClass "keyboard"
[ 2358.860] (II) LoadModule: "evdev"
[ 2358.860] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2358.860] (II) Module evdev: vendor="X.Org Foundation"
[ 2358.860] compiled for 1.15.0, module version = 2.8.2
[ 2358.860] Module class: X.Org XInput Driver
[ 2358.860] ABI class: X.Org XInput driver, version 20.0
[ 2358.860] (II) Using input driver 'evdev' for 'Power Button'
[ 2358.860] (**) Power Button: always reports core events
[ 2358.860] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2358.860] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2358.860] (--) evdev: Power Button: Found keys
[ 2358.860] (II) evdev: Power Button: Configuring as keyboard
[ 2358.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 2358.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2358.860] (**) Option "xkb_rules" "evdev"
[ 2358.860] (**) Option "xkb_model" "pc104"
[ 2358.860] (**) Option "xkb_layout" "de"
[ 2358.860] (**) Option "xkb_variant" "nodeadkeys"
[ 2358.875] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 2358.875] (**) Power Button: Applying InputClass "system-keyboard"
[ 2358.875] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2358.875] (**) Power Button: Applying InputClass "keyboard"
[ 2358.875] (II) Using input driver 'evdev' for 'Power Button'
[ 2358.875] (**) Power Button: always reports core events
[ 2358.875] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 2358.875] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2358.875] (--) evdev: Power Button: Found keys
[ 2358.875] (II) evdev: Power Button: Configuring as keyboard
[ 2358.875] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 2358.875] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2358.875] (**) Option "xkb_rules" "evdev"
[ 2358.875] (**) Option "xkb_model" "pc104"
[ 2358.875] (**) Option "xkb_layout" "de"
[ 2358.875] (**) Option "xkb_variant" "nodeadkeys"
[ 2358.875] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2358.875] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event27)
[ 2358.875] (II) No input driver specified, ignoring this device.
[ 2358.875] (II) This device may have been added with another device file.
[ 2358.875] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event26)
[ 2358.875] (II) No input driver specified, ignoring this device.
[ 2358.875] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event25)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event24)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event23)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event22)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event18)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event17)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event16)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.876] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event15)
[ 2358.876] (II) No input driver specified, ignoring this device.
[ 2358.876] (II) This device may have been added with another device file.
[ 2358.877] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[ 2358.877] (II) No input driver specified, ignoring this device.
[ 2358.877] (II) This device may have been added with another device file.
[ 2358.877] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 2358.877] (II) No input driver specified, ignoring this device.
[ 2358.877] (II) This device may have been added with another device file.
[ 2358.877] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[ 2358.877] (II) No input driver specified, ignoring this device.
[ 2358.877] (II) This device may have been added with another device file.
[ 2358.877] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 2358.877] (II) No input driver specified, ignoring this device.
[ 2358.877] (II) This device may have been added with another device file.
[ 2358.877] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event19)
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "system-keyboard"
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "keyboard"
[ 2358.877] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 2358.877] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event19"
[ 2358.877] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[ 2358.877] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 2358.877] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 2358.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.1/4-1.2.1.2/4-1.2.1.2:1.0/input/input19/event19"
[ 2358.877] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 8)
[ 2358.877] (**) Option "xkb_rules" "evdev"
[ 2358.877] (**) Option "xkb_model" "pc104"
[ 2358.877] (**) Option "xkb_layout" "de"
[ 2358.877] (**) Option "xkb_variant" "nodeadkeys"
[ 2358.877] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event20)
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "system-keyboard"
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 2358.877] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "keyboard"
[ 2358.877] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 2358.878] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 2358.878] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event20"
[ 2358.878] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[ 2358.878] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[ 2358.878] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 2358.878] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 2358.878] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[ 2358.878] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 2358.878] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Forcing absolute x/y axes to exist.
[ 2358.878] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 2358.878] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 2358.878] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 2358.878] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 2358.878] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 2358.878] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2358.878] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.1/4-1.2.1.2/4-1.2.1.2:1.1/input/input20/event20"
[ 2358.878] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 9)
[ 2358.878] (**) Option "xkb_rules" "evdev"
[ 2358.878] (**) Option "xkb_model" "pc104"
[ -
Error while saving the records in the database
Hi,
I am running into a wierd error.
I have built a new page which contains the information about the employees. Some of the fields are updatable fields. The page shows the details of the person who logs into the page.
I am not using EO in this page. The data is queried from the database from VO and displayed in the page and when the records are updated, they are saved in the databased using pl/sql procedure which is
being called from AM. So i am basically not using VO to save the records in the database.
The error which i am getting is,
If 2 users are trying to update the page at the same time, user A's details are updated in user B's page.
This is really causing the issue. Any help is greatly appreciated.
Thanks in advance.
PKI have posted the code used along with the dialog page. Please review.
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Pavan, Start1",OAFwkConstants.STATEMENT);
if (pageContext.getParameter("XYZBack")!=null)
pageContext.setForwardURL("OA.jsp?OAFunc=OAHOMEPAGE"// OAWebBeanConstants.RETURN_TO_MENU_URL also tryed this , same error
,null
,OAWebBeanConstants.KEEP_MENU_CONTEXT
,null //not needed as we are retaining menu context
,null // no parameters are needed,true //retain AM,OAWebBeanConstants.ADD_BREAD_CRUMB_YES
,true
,null
,OAWebBeanConstants.IGNORE_MESSAGES);
if(pageContext.getParameter("XYZUpdate") !=null)//The fields and their values are loaded as soon as the update button is clicked. We do this before calling the oadialog page so that the values are not lost
OAViewObject EmpDetailsVO3 = (OAViewObject)OAAppl.findViewObject("XYZPersInfoVO");
OARow EmpDetailsRow3 = (OARow)EmpDetailsVO3.first(); //Bringing the control over to the first row which is nothing but the displayed row.
if(EmpDetailsRow3 !=null)
s_workphone = EmpDetailsRow3.getAttribute("WorkPhone").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"workphone is: "+s_workphone,OAFwkConstants.STATEMENT);
s_fax = EmpDetailsRow3.getAttribute("WorkFax").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Fax is: "+s_fax,OAFwkConstants.STATEMENT);
s_building = EmpDetailsRow3.getAttribute("Building").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Building is: "+s_building,OAFwkConstants.STATEMENT);
s_room = EmpDetailsRow3.getAttribute("Room").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Room is: "+s_room,OAFwkConstants.STATEMENT);
s_box = EmpDetailsRow3.getAttribute("Box").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Box is: "+s_box,OAFwkConstants.STATEMENT);
s_preferedname = EmpDetailsRow3.getAttribute("KnownAs").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Preferred name is: "+s_preferedname,OAFwkConstants.STATEMENT);
OAException OAExcep1 = new OAException("PER","XYZ_UPDATE_DETAILS");
OAException OAExcep2 = new OAException("PER","XYZ_UPDATE_MESSAGE");
OADialogPage OADialogPG1 = new OADialogPage(OAException.WARNING,OAExcep1,OAExcep2,
OADialogPG1.setOkButtonToPost(true);
OADialogPG1.setNoButtonToPost(true);
OADialogPG1.setOkButtonLabel("Yes");
OADialogPG1.setNoButtonLabel("No");
OADialogPG1.setOkButtonItemName("DoOk");
OADialogPG1.setNoButtonItemName("DoNo");
OADialogPG1.setPostToCallingPage(true);
pageContext.releaseRootApplicationModule();
pageContext.redirectToDialogPage(OADialogPG1);
else if(pageContext.getParameter("DoOk") != null)
OAApplicationModule EmpDetailsAM = pageContext.getApplicationModule(webBean);
Class[] paramtypes = {String.class, String.class, String.class, String.class,String.class,String.class,String.class};
Serializable[] params = {s_personid,s_workphone,s_fax,s_building,s_room,s_box,s_preferedname};
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"personid is :"+s_personid,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"workphone is :"+s_workphone,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"workfax is :"+s_fax,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"building is :"+s_building,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"room is :"+s_room,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"preferredname is :"+s_preferedname,OAFwkConstants.STATEMENT);
pageContext.releaseRootApplicationModule();
OAAppl.invokeMethod("TransactionCommit",params,paramtypes);
OAAppl.invokeMethod("initDetails");
throw new OAException("The Building and Phone Information have been saved successfully"
,OAException.INFORMATION);
thank you -
Can not delete record from the master block ,frm-40202 field must be entere
hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
:LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
:LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
:LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PMIf this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms -
HT204088 Hi team can your team send me the purchase record of the game barcode soccer
Hi team
Can your team send me back the purchase record for the game barcode soccer that I purchase under this account thanksThis is a User to User Forum... What do you require and from whom...
-
Urgent help needed: how to display a list of records on the screen
Hello,
This is very urgent. Can anyone help me. I have posted this query of mine before also but still no reply came. My whole application is dependent on this problem. Actually I am developing an application for mobile phone using MIDP. I have a record store which contains personal details for users. I am able to add records to the record store. Now I want that these records can be edited. For this I want to display a list of firstname field on the screen (and not console) so that i can select a user to edit its details. I have written the code to read the records and individual fields and display it on the console but i want to display that list on screen. I tried list and array but it s giving some error.
I am giving the code to read the records below. Please tell me how can I display it in a list on the screen.
public void readStream(){
try
byte[] recData=new byte[50];
String varname;
ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
DataInputStream strmData=new DataInputStream(strmBytes);
if (rsperdt.getNumRecords() > 0){
ComparatorString comp=new ComparatorString();
int i=1;
RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
while(re.hasNextElement()){
rsperdt.getRecord(re.nextRecordId(), recData,0);
System.out.println("Record #" + i );
varname = strmData.readUTF();
System.out.println("Name #"+varname);
System.out.println("---------------------------");
i=i+1;
strmBytes.reset();
comp.compareStringClose();
re.destroy();
strmBytes.close();
catch(Exception e){
System.err.println("read Records class:read");
}I could not understand ur point "post the code in tags". I am pasting the code below. Please help as my whole application is stuck due to this problem and I have a deadline of 7th oct.
This midlet is getting called from some other midlet.
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
import javax.microedition.rms.*;
import java.io.*;
import java.util.*;
public class frmread extends Form implements CommandListener
static final String rec_store="db_per";
private RecordStore rsperdt=null;
private Vector vecname;
private ChoiceGroup chname;
private boolean flagSortByPriority = false, flagShowPriority = true;
private Form fmmain;
private Command cmdBack;
private teledoc midlet;
public frmread(String title, teledoc midlet)
super(title);
this.midlet = midlet;
openRecStore();
this.setCommandListener(this);
chname = new ChoiceGroup("new", Choice.EXCLUSIVE);
vecname = new Vector();
cmdBack = new Command("Back", Command.BACK, 1);
fmmain = new Form("Record Search");
addCommand(cmdBack);
setCommandListener(this);
readStream();
rebuildTodoList();
closeRecStore();
* Process events for this form only
protected void rebuildTodoList()
for(int j=chname.size(); j>0; j--)
chname.delete(j-1);
int priority;
todoitem item;
String text;
StringBuffer sb;
for (int j=0; j<vecname.size(); j++)
item=(todoitem) vecname.elementAt(j);
priority = item.getPriority();
text = item.getText();
sb = new StringBuffer((flagShowPriority ? (Integer.toString(priority) + "-"): ""));
sb.append(text);
chname.append(sb.toString(), null);
public void commandAction(Command c, Displayable s)
if (c == cmdBack){
midlet.displayteledoc();
public void readStream(){
try
byte[] recData=new byte[100];
String varname;
int varname1=0;
ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
DataInputStream strmData=new DataInputStream(strmBytes);
if (rsperdt.getNumRecords() > 0){
ComparatorString comp=new ComparatorString();
int i=1;
int id = 1;
vecname.removeAllElements();
RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
while(re.hasNextElement()){
rsperdt.getRecord(re.nextRecordId(), recData,0);
System.out.println("Record #" + i );
varname = strmData.readUTF();
varname1 = strmData.readInt();
id = re.nextRecordId();
System.out.println("Name #"+varname);
todoitem item = new todoitem(varname1, varname, id);
vecname.addElement(item);
System.out.println("---------------------------");
i=i+1;
strmBytes.reset();
comp.compareStringClose();
re.destroy();
strmBytes.close();
catch(Exception e){
System.err.println("read Records class:read");
public void openRecStore(){
try{
rsperdt=RecordStore.openRecordStore("db_per",true);
catch(RecordStoreException e){
db(e.toString());
public void closeRecStore(){
try{
rsperdt.closeRecordStore();
catch(Exception e){
db(e.toString());
public void db(String str){
System.err.println("Msg:" + str);
class ComparatorString implements RecordComparator{
private byte[] recData = new byte[20];
private ByteArrayInputStream strmBytes = null;
private DataInputStream strmDataType = null;
public void compareStringClose(){
try{
if(strmBytes != null)
strmBytes.close();
if(strmDataType != null)
strmDataType.close();
catch (Exception e)
public int compare(byte[] rec1, byte[] rec2)
String str1, str2;
try {
int maxsize = Math.max(rec1.length, rec2.length);
if (maxsize > recData.length)
recData = new byte[maxsize];
strmBytes = new ByteArrayInputStream(rec1);
strmDataType = new DataInputStream(strmBytes);
str1=strmDataType.readUTF();
strmBytes = new ByteArrayInputStream(rec2);
strmDataType = new DataInputStream(strmBytes);
str2=strmDataType.readUTF();
int result=str1.compareTo(str2);
if (result == 0)
return RecordComparator.EQUIVALENT;
else if (result < 0)
return RecordComparator.PRECEDES;
else
return RecordComparator.FOLLOWS;
catch (Exception e)
return RecordComparator.EQUIVALENT; -
Hello all
I'm scheduled to work with a friend this week; I'm going to help him make a simple audition DVD. I promised him I had the necessary equipment and such.
I was importing from the webcam using iMovie. If I can't use my external mic to record for the video, there is more involved in the editing process. I was hoping to record the video and audio into one package. I'm using the built-in FaceTime webcam on my macbook pro and a ZoomH1 on usb.
I've tried changing the audio in system preferences: input to H1. This works when recording with audacity or anything else. I even changed the input on FaceTime to H1. There aren't any preferences I can find in iMovie to change the input for importing video directly from the webcam.
How do I change the audio input for direct import on iMovie?
OR
Is there something else I can do to have HD video and HQ audio captured in one video file on my macbook pro?
I suppose I can record the video and audio separately but that is usually much more involved. This is why I got this usb microphone lol.
Thanks in advance,
-SethI just found using QuickTime Player to record a movie works great. I can easily change the audio input. iMovie is silly. lol
If I missed anything let me know.
Thanks
-Seth -
Double data records in the cube.
Hi experts
when we are loading the data from DSO to infocube by using DTP ,
the Problem is its updating double records in the infocube, with same record and the key figure values zero .
in the transformations we don't have any start routine, end routine ..
Please could any tell me how to overcome from this
thanks
kumarHi Fredrik,
not all settings in infopackages work in chains in the same way they do while running the package manually. Mostly you can check that with pressing F1 on the setting. In your case, you need to add a process type for deleting the data to the chain. In your chain maintenance, look at process types and then in load processes .... There you will find the type you need.
kind regards
Siggi -
End Routine - Modify a record in the cube
Hello Guys,
In the end routine I have to update a field . The transformation is the same cube to the cube. I want the record to be modified like add a value to a field in the end routine. Since it is a cube it creates a new record instead of overwriting the existing record. Is there anyway I can modify the record. I know I can make the existing record 0.00 and then create a new record with the new value.Is there any other solution.
For example:This is the existing record in the cube
sales order Item No Backlog Amount Indicator
1000 10 1000.00
After applying the end routine it has 2 records ( I modify the record with the indicator value)
sales order Item No Backlog Amount Indicator
1000 10 1000.00
1000 10 1000.00 REV
After applying the end routine I need the record to be like overwrite(similar to DSO)
sales order Item No Backlog Amount Indicator
1000 10 1000.00 REV
How to achieve the above result in end routine.
Thanks
SenthilHi there,
Since you create new records in end routine in the InfoCube, why not delete the old ones?
You can use the
delete RESULT_PACKAGE where ...
Therefore deleting the old records after inserting the new ones.
Diogo. -
Incomplete Data on report (report does not show all records from the table)
Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek
Maybe you are looking for
-
Print a block of data (such as a check) only once per section? How?
I am creating a batch report for invoices where I summarize all invoiced transactions for the given period and then print a check. I am required to print no more than 20 invoice transaction records per page due to the check paper being printed on. Th
-
Since downloading the OS X Yosemite upgrade Apple Mail isn't working. I think there's a major bug. It hangs and won't respond. Can't access the Mail menu bar commands to make any changes. It crashes. It isn't displaying email content. And, quite oddl
-
HT1529 how could i connect a xbox 360 to imac monitor?
i would like to connect my xbox to my imac monitor to use it as a display.
-
MacBook always needs to be woken from deep sleep twice
Whenever I wake my MacBook Pro (mid 2012) from "deep sleep"/"hibernation", it wakes up with the gray loading bar and brings me to the login screen as usual, but the keyboard and mouse remain unresponsive. The cursor is blinking in the "Enter Passwo
-
Mon ipad ne veux pas faire de mise à jour 6.0
bonjour je vien d'acheter un ipad d'ocasion est le soucie il ne veu pas se mettre à jour quand je veux télécharger des application il me dit que ma verssion n'est pas compatible devrait t'i etres en 6.0 au lieu de 5.1.1 version 5.1.1 (9B206) modele :