Recording Level Automatic Level Control

My ALC setting has changed. It used to be OK but now the check box is unchecked for every recording and the slider is maxed out! from the start My recordings are really too loud! How can I reset GB so that the ALC is on by default as it used to be? I don't know why the setting changed. Please let me know if I should just reinstall GB or what I can do to reset the ALC to "on" as default.
Thanks.
DF.

I refer the honourable gentleman to the reply I gave some moments ago.

Similar Messages

Automatic Level Control.

I am transferring stereo audio cassettes into GB. I noticed that when I check Automatic Level Control, it always goes to 75%. Does this just start there and manually ride the audio or is it "smarter" in a digital way. I think the results with the auto level "on" sound good so far but I noticed a few sudden volume drops here and there. I am not sure if they came from the Auto Level. It's hard to find the exact spots on tape to compare since I've transferred a few hours worth already. Do I need to go back and just set my own levels? I do want to best possible copy. If so, can let it hit red on the peaks? (I don't hear it distort on the short peaks but I'm monitoring with crummy speakers now) Thanks!

In case anyone is curious, the Auto Level is not for quality recording. It was jumping the volume around after all. Be careful of this. That's how you learn a new program I guess I wanted to redo some other stuff anyway so no big loss.

Automate Process Control to update Review Levels

Using 11.1.2.2.301
Is there a process that can automatically start and promote new members to a specific review level, or the review level that its siblings are currently set to?
Back ground: At the beginning of each period we manually promote all entities to Review Level 1 which allows our data load automation and consolidation to work as expected. As we work toward closing the period new members are added to the metadata. Since these are not at the same review level our automation errors out. We need everything to be at the same level so the next group can promote on up to following review levels. We are currently using the filters in the Data Process Control section, but it is very manual and time consuming. Can automation be created to search through all the affected periods to find any member that is not at Review Level 1 and promote it to that level? If not automation is there a better way to accomplish this?
Thanks
Andie

Hi Andie
I know you can use Taskflows to automate Process Control actions so may be worth looking into that, but I have not used that option before so can't comment on how effective it is. Hopefully someone who reads this has a more elegant method of doing it!
In terms of finding which members aren't at RL1, it is pretty easy to knock up a report in FR or Smart View which can pull all entities at certain review levels, and you could use conditional formatting/supression options to filter out the ones which need promoting. You could run one of these prior to your loads just to make sure that everything is at the right review level and quickly pick up anything which isn't..
Thanks
JR

Automatic Level Control is dimmed. how do I activate it?

I noticed right under the menu that has the track effects on the right side, that the Automatic Level Control is dimmed. How do I activate it?

Maureen Brill wrote:
I am using an Alesis io interface
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

Microphone level automatically resetting

I have set the microphone level on my iMac a number of times now and it keeps reverting back to the default level. I discovered this after my second or third video conference with iChatAV. The (same) person on the other end complained about my audio levels so I found that the level was reset in System Preferences. How do I get the microphone level to stay where I set it? Thanks.
cgreco16

This is a "feature" of iChat AV.
It has a built in Automatic Gain Control that resets your mic to between 67 and 80% whenever you open the preferences or un-mute it.
The only work-around that I am aware of is, since I use an external mixer, I set the input to be at the AGC level so I don't over drive it when the AGC does it's thing.

Approval Level in Process Controlled workflows

Hi Sap Gurus,
How can i find the number of approval levels in process controlled workflows for Shopping Cart, Purchase Order....
Thanks in advance

Hello,
IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Business Workflow > Process-Controlled Workflow > Business Process Configuration > Define Process Levels
For concerned object type, select "Process Schema Definition" directory.
Then, select correct process level schema to display "Process Level Configuration" directory: here are the process levels defined.
Regards.
Laurent.

How to populate the Error stack during error records in field level routine

hi,
I am capturing the error records in Field level routine in transformation. now i want these records to reflect in error stack.
i am using 'Append monitor-rec to MONITOR' at the moment but i cant see any records in error stack.
but when i am using the same statement in start routine i am getting records in error stack.
can anyone please help as to how can i populate error stack through field level routine?

Hi,
Try to do it in the end routine instead of the field routine.
It should work.
Regards,
Joe

Skip a record at Infopackage level

Hi all
I need to skip a record at infopackage level due to a problem in processchains and we dont wont this to be repeated again, could someone help me with the code for this
Will definetely assign points
Chris

Hi,
you can actually select the record that u want to filter in the <u>transfer rules maintainance screen</u>. once u have selected these records , those records will be displayed in infopackage screen.
hope this helps!
Ravi

Does SAP increase SM50 ... - trace level automatically?

Hi experts,
Does SAP increase SM50 ... -> trace level automatically? I find file system is full in application server from time to time and I find trace level increases to 2 from default: 1. Why? How do I prevent from reoccurring?

Hello
These files are work process trace files, this has nothing to do with the system log.
You can restrict these file growth using instance parameter rdisp/TRACE_LOGGING as stated in the here under note.
Check also the value of instance parameter rdisp/TRACE as stated in note 112 - Trace and error information in the "dev_" files
Regards
573800 - Reasons for trace files increasing in size
How can I prevent trace files that are increasing in size from filling the hard disk and causing the system to shut down?
- Reset the trace files (as described as Section 1 of note 532918).
- Set the "rdisp/TRACE_LOGGING = on, 10 m" profile parameter

How does PrE 9 fix audio levels automatically?

Hi,
In one of my projects, I'm combining multiple pieces of footage with different audio levels. I've read somewhere that PrE 9 fixes audio levels automatically. How do I use this? Where is this feature in the app?
Thanks,
Sam

The main thing I want is to make sure that audio level is too high for one footage and then too low on the other. At the end, all the clips are put together to produce a single video and I want the audio to be consistent throughout the video.
Would I then select all the clips and do what you're suggesting? Do I do this one clip at a time or do I select all at once -- not sure how to do it?
Thanks,
Sam

I found the voice record, now no levels/no recording

I found the voice record, now no levels/no recording

You're going to have to post a WHOLE lot more information than that for anyone to even know what you're saying.

Capacity levelling -automatic- SAP- PS

Please tell us how system do the automatic levelling.
I have created 2 similar activities.1 is starting today and 2nd after 3days. Ist is having 4 hours spare time and second is overloaded by 4hours.
For this system should consider the spare time avilable in the workcenter for the particular day and should level it.
Pls revert to us.
Regards
N.Raju

Hi Raju,
Automatic capacity levelling is not possible in SAP PS.
There can be various reasons for this:
1. The system might not be able to decide what other work center u want to select if there is an overload.
2. The system might not be able to decide whether to change the dates in the activity or not.
By the way, you can do it through some ABAP program.
regards
sunil kar

LCD brightness level automatically reset

Dear Experts and other user,
Started from yesterday, my T61 laptop LCD brightness level automatically reset to lower in everytime i started it. I needed to manually tune up the brightness level.
The laptop is firmly connected to the AC power. And i have did nothing under the Windows system. Is it any hardware issue or software configuration issue?
Many thanks with your attention and advise.
ED

My "energy saver" pref does NOT have the options for "Automatically reduce the brightness of the display before the display sleeps" item mentioned above. It has only the 4 following entries:
Wake Options:
-Wake when the modem detects a ring
-Wake for Ethernet network administrator access
Other Options:
-Allow power button to sleep the computer
-Restart automatically after a power failure
This option does show up in the help file and I am imagining that I either don't have the hardware to support it or it is geared for laptops.
I have tried using the terminal to issue a pmset command (logged in as root of course) to see if I could affect this behavior.
pmset -a lessbright 0
pmset -a halfdim 0
neither of them showed up in the file:
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
contents:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Custom Profile</key>
<dict>
<key>AC Power</key>
<dict>
<key>Automatic Restart On Power Loss</key>
<integer>0</integer>
<key>Disk Sleep Timer</key>
<integer>180</integer>
<key>Display Sleep Timer</key>
<integer>69</integer>
<key>Sleep On Power Button</key>
<integer>0</integer>
<key>System Sleep Timer</key>
<integer>69</integer>
<key>TTYSPreventSleep</key>
<integer>1</integer>
<key>Wake On AC Change</key>
<integer>0</integer>
<key>Wake On Clamshell Open</key>
<integer>1</integer>
<key>Wake On LAN</key>
<integer>0</integer>
<key>Wake On Modem Ring</key>
<integer>0</integer>
</dict>
</dict>
</dict>
</plist>

Transfered and Added records at DSO level

Hello Experts,
I am always confused about Transfered and Added records at DSO level. While I was testing DSO data I observed that, Transferred records are after Transformation before End routine. Added records are after End routine added to the New data table. Can u please put some light on this.
Many thanks,
Zakir Khan.

Hi
The Transferred Records column displays the number of records transferred to the BI system. The records are usually written to the PSA first of all.
The Added Records column displays the number of records that were written into the InfoProvider. This number can differ from the number of transferred records if records were filtered out or added during the transformation
Please Refer Below Link
Re: added records and transferred records
Thanks

Credit management automatic credit control use of credit group

Hello gurus
1)In the credit management we have credit groups( which enables us to combine different sales
document types for the purposes of credit management).
In the simple credit check also we will assign the doc types to check the credit. Then please tell me why we need credit groups in automatic credit control? Here also we can assign the doc types to check the credit ?then what exactly is the use of credit group ?
2)where will we specify the total credit amount allowed of the credit control area?
3)In the automatic credit control (ova8) against to static check box option we have open orders and open delivers checkboxes. is this two boxes only specific to static or it also belongs to dyanic?
Is it necessary to check this boxes?
4)is any one have used any of the routines in automatic credit control( document controlling tab we have no credit check field here we specify the routine? If any business need please share with me
Thank you in advance for all the replies

Hi
For your 1st query , In credit mgmt we assign credit grps to sales document type. So as you said we will assign credit grps at simple credit check and coming to the Automatic credit check we assign credit grp for the sales document type also .But the difference is credit grp can be at order level or Delivery Level or PGI level in OVA8 in Automatic credit check .
Coming to your 2nd Query , we will specify the total credit limit in FD32.
For your 3rd query , In OVA8 apart from the static check we check the boxes open orders and open deliveries also because once you activate Automatic credit check and once you maintain credit limit for any customer then system will check the open orders and open deliveries also of that customer
Coming to your last query the routine feild can be used when some requirements have to be fulfilled then only automatic credit check should work for customers. or else the sales order ->delivery->PGI will happen normally
Regards
Srinath

Recording Level Automatic Level Control

Similar Messages

Maybe you are looking for