Recording line in with LE

I want to record or alteast monitor my line in. I have my turn tables hooked up to my line in. Right now i use Garageband. How can i do it with LE?
Thanks

In Logic audio tracks there's a button to enable recording; it's marked R!
A look at the Logic document "Logic for GarageBand Users.pdf" could be useful to shorten your learning curve
cheers
rob

Similar Messages

  • Recording line-in with my Audigy 2

    Hi everyone,
    I just got my new pc from dell,
    I will use it mainly for recording, but there is one problem!
    In the recording mixer window I can only select Analog mix (Line in, Aux etc.) for recording,
    and not just the line in.
    All I need is to be able to record the line in exclusi'vely,
    I could also do that through the mic input,
    but somehow I can't get the levels right for that.
    Please help!
    thanks

    Doesn't anyone know?
    I tried the mic input, but the input volume is way too low.
    I really don't want to buy another soundcard for souch a small problem,
    so I'd really appreciate some help! thanks!

  • Recording line-level input with Griffin iMic

    I'm having trouble recording line-level input from a stereo system with a Griffin iMic. Even though all extraneous inputs have been deactivated, I'm still getting a slight feedback hum. There should be no extraneous noise whatsoever. I haven't done this in quite a while, so I've forgotten what I must do. Any help is apprreciated. Thanks very much. Peace,
    iBook G3, 1.42 Mac mini G4 DVD±RW   Mac OS X (10.3.9)   640Mb SDRAM, 1gb DDRAM

    I'm trying to digitize an audio cassette with
    Soundtrack Pro. My setup includes a Griffin iMic
    that goes to a USB port. The trouble I'm having is
    in controlling the input volume. The level meters
    indicate clipping, but I'm not clear how to set the
    input level.
    If it's in the Recording tab (>Input) with the Gain
    slider, mine is greyed out.
    M Wohlgy,
    (I know this is months after your post.)
    Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
    Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
    I use the iMic exclusively.
    David

  • If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

    If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

    Have a look at Soundflower at this link:
    http://www.macworld.com/article/1159440/soundflower_capture.html

  • Record line in music with Zen Nano 51

    how can we record the music with line in?
    which line in?
    can we use earphone jack as line in?

    It's the Zen Nano Plus that has a line in port. It would be on the bottom of the player (opposite end from the headphone jack), next to the USB port and have Line-In written next to it.
    There's menu options to recording using it on the player.

  • Logic Pro when recording audio and midi takes, the regions sometimes become confused. The midi tracks line up with audio tracks.

    When recording midi and audio tracks simutaneously the midi tracks don't always line up with the software instrument channel. They may show up on the audio track. Sometimes they appear white instead of the normal green. Any suggestions?

    Hey there jlholm,
    It sounds like you are seeing some unexpected behavior when you are working on your project. I would use troubleshooting steps 6-10 from the following article named:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How can we assign different colours to different records(line items) in alv

    how can we assign different colours to different records(line items) in alv reporting?

    Hi Friend,
    Please see this SDN Wiki  for setting the color in ALV :[http://wiki.sdn.sap.com/wiki/display/ABAP/ABAP-DevelopingInteractiveALVReportusing+OOABAP]
    There are so many SDN Wiki's on this  just try with search  Alv Color display in SDN,
    Regards,

  • IDOC Data record is appending with NULL characters instead of spaces.

    Hi Gurus,
    1)     We have created a port with Japanese characters for MATMAS05 (IDOC type) and trying to download an IDOC into an XML file using the ADAPTER, the actual data is less than the length of the IDOC string so we need to append the remaining spaces to each data record which in turn fills the segment pad but whereas in NON-UNICODE server the data record is appending with NULL characters instead of spaces.
    2)     For Japanese port the receiver port name in XML file is appearing with some junk characters in NON-UNICODE client, whereas in UNICODE client it is displaying the correct port name with Japanese characters.
    Your help will be appreciated.
    Thanks in Advance.

    ORA-06512 indicates a numeric or value-error line 2 seems to show to the first statement.
    Check the datatypes of your columns/items.
    Try to issue an update manually in SQL*Plus to see if it works generally.

  • Recording streaming videos with sound

    Can I use quicktime for recording streaming videos with sound? If not which Apple software can do it?
    Bye Christof

    You can use Quicktime to record streaming video +with it's audio+ by using a very simple trick. Using the same cable you connect your iPod/iPhone to your car's stereo system, connect your Mac's Audio OUT to its MIKE IN jack. I used FILE / OPEN URL to select the video stream source, then selected FILE / NEW SCREEN RECORDING. In the resulting 'Screen Recording' dialog box, I set the AUDIO slider all the way to the right, and under the arrow to the right, selected "Built-in Input Line In" for the microphone. I then used the appropriate controls to play the stream and record it. The resultant file was very acceptable. Good luck.

  • HT2929 record live set with garageband

    hi, is it possible to record a liveset with garageband through my mac connected to my mixer ?
    rgds  niels

    niels van der burg wrote:
    is it possible to record a liveset with garageband through my mac connected to my mixer ?
    yes, plug the console into the line-IN on the mac and set up GB:
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    however GB would not be my recommended choice, especiall if the recording is to be unattended. if GB throws a modal error dialog it will cease recording; an audio editor is often a better choice:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Using Line Stretch With Frame Property

    Hi Folks,
    I'm using Report Builder (Developer 2000 ver 6.0) and in one particular report, I would like to have vertical lines between displayed columns from the table.
    When I use the Layout Model and draw lines between the columns and use the Line Stretch With Frame Property of that particular line and choose the relevent frame, the line stretches with the number of records ( as I have reduced the number of records to 8 per page) only on pages from 2 onwards. On the first page the line does not stretches. Why is that?
    Similarly I would like to draw a line at the end of each record on each page, but when I draw the line in the Layout Model, it is always displayed in the middle of records instead of the last record.
    Thanks in advance
    regards
    Hassan

    It's a hardware fault. I suggest you make a "Genius" appointment at an Apple Store to have it tested. It's a free service. The repair won't be free, but if it's something simple, such as a bad memory module, you may be able to fix it yourself.

  • Vendor Line item with Opening and Closing Balances report regarding

    Dear All,
    I need a report for vendor line items with Opening and Closing balances.
    Thanks in advance
    Sateesh

    Hi
    Try S_ALR_87012082 - Vendor Balances in Local Currency
    Regards
    Sanil Bhandari

  • Unable to record internal audio with RecordMyDesktop

    In order to record sound and video from my desktop, I installed RecordMyDesktop (https://wiki.archlinux.org/index.php/RecordMyDesktop) and followed the instructions from post #4 and #6 on a thread about "Recording internal audio with alsa and recordmydesktop" (https://bbs.archlinux.org/viewtopic.php … 3#p1359593). When I try to record with "recordmydesktop --device looprec", it will not start recording and closes with the following error:
    Initial recording window is set to:
    X:0 Y:0 Width:1920 Height:1080
    Adjusted recording window is set to:
    X:0 Y:4 Width:1920 Height:1072
    Your window manager appears to be i3
    Initializing...
    Buffer size adjusted to 4096 from 4096 frames.
    Opened PCM device looprec
    Couldn't set format.
    Error while opening/configuring soundcard looprec
    Try running with the --no-sound or specify a correct device.
    If this information would be helpful, I use alsamixer and "aplay -l" gives the following:
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC663 Analog [ALC663 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 1: ALC663 Digital [ALC663 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
    Subdevices: 7/8
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7
    card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
    Subdevices: 8/8
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7
    I can record from the microphone with with the command "recordmydesktop". I succeeded in recording the internal audio with audacity by choosing the device "looprec" for recordings. I'm not sure why RecordMyDesktop gives an error while Audacity does not. Below is my ~/.asoundrc, which I copied from the aforementioned thread. I am not knowledgeable, but I guess there is a mistake in it? Would you please assist me solving this error? Thank you for your time.
    pcm.!default {
    type asym
    playback.pcm "LoopAndReal"
    #capture.pcm "looprec"
    capture.pcm "hw:0,0"
    pcm.looprec {
    type hw
    card "Loopback"
    device 1
    subdevice 0
    pcm.LoopAndReal {
    type plug
    slave.pcm mdev
    route_policy "duplicate"
    pcm.mdev {
    type multi
    slaves.a.pcm pcm.MixReale
    slaves.a.channels 2
    slaves.b.pcm pcm.MixLoopback
    slaves.b.channels 2
    bindings.0.slave a
    bindings.0.channel 0
    bindings.1.slave a
    bindings.1.channel 1
    bindings.2.slave b
    bindings.2.channel 0
    bindings.3.slave b
    bindings.3.channel 1
    pcm.MixReale {
    type dmix
    ipc_key 1024
    slave {
    pcm "hw:0,0"
    rate 48000
    #rate 44100
    periods 128
    period_time 0
    period_size 1024 # must be power of 2
    buffer_size 8192
    pcm.MixLoopback {
    type dmix
    ipc_key 1025
    slave {
    pcm "hw:Loopback,0,0"
    rate 48000
    #rate 44100
    periods 128
    period_time 0
    period_size 1024 # must be power of 2
    buffer_size 8192
    Last edited by rayanamukami (2014-07-05 14:05:20)

    You might want to take a look here and here.

  • I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4.  However, I cannot record voice memos with my Bluetooth mic.

    I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine.  I can also use voice activated dialing, although it fails miserably interpreting numbers.  However, I cannot record voice memos with my Bluetooth mic.   I just get barely audible static.  Any suggestions?   Thanks.

    Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
    Thanks!

  • Customer line items with balance carry forward no opening balance

    Hello FI Experts,
    We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
    Requirement Here Is:  The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
    Thanks for helping on this issue.

    Hi,
      Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
    Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
    If you are checking in the middle of the year, then the balance will not be carry forwarded.
    Regards,
    B. Radhika.

Maybe you are looking for