Recording line-in with my Audigy 2

Hi everyone,
I just got my new pc from dell,
I will use it mainly for recording, but there is one problem!
In the recording mixer window I can only select Analog mix (Line in, Aux etc.) for recording,
and not just the line in.
All I need is to be able to record the line in exclusi'vely,
I could also do that through the mic input,
but somehow I can't get the levels right for that.
Please help!
thanks

Doesn't anyone know?
I tried the mic input, but the input volume is way too low.
I really don't want to buy another soundcard for souch a small problem,
so I'd really appreciate some help! thanks!

Similar Messages

Recording line in with LE

I want to record or alteast monitor my line in. I have my turn tables hooked up to my line in. Right now i use Garageband. How can i do it with LE?
Thanks

In Logic audio tracks there's a button to enable recording; it's marked R!
A look at the Logic document "Logic for GarageBand Users.pdf" could be useful to shorten your learning curve
cheers
rob

How to perform simultaneous multitrack recording with an Audigy 4 P

Dear Sir/Madam,
We are comming from the Uni'versity of Maribor, Slovenia. We recently buyed an Audigy 4 Pro Sound Blaster for our studio recording purposes. Here is the description of the problem:
We would like to record the speech database which will be used later to perform text to speech sinthesis (sampling rate of 96kHz, 24-bit resolution). Therefore, we need to SIMULTANEOUSLY record the stereo signals from 2 microphones located at different distances. That is, for each microphone we would have two channels which resulted in a requirement of recording 4 channels symultaneously!!!
We succeded to record the signals from either first or second microphone separately, but we couldn't record the stereo signals from the both microphones simultaneously!!! Namely, in the Creative mixer there is possible to select ONLY one recording input in a time. But we need to record the signal simultaneously from two inputs.
Our question are:
. How can we perform simultaneous, multitrack recording with an Audigy 4 Pro using two stereo inputs (e.g. from Line In and Line In 2 inputs)?
2. Which -from Creative recommended- recording software supports this multritrack recording? Namely, the recordings from the two microphones should be aligned in time as much as possible.
Thank you very much for your help!
Altair

Hi
You need recording software (Cubasis (not sure), Cubase, Sonar, etc.) which supports
ASIO drivers and a 'multichannel' microphone pre-amp/mixer to get microphone(s) connected
'separately' into Audigy Input's.
ASIO driver gives more 'Input sources' to choose from compared to WDM's one stereo/2 mono
channel capability.
.jtp

Recording line-level input with Griffin iMic

I'm having trouble recording line-level input from a stereo system with a Griffin iMic. Even though all extraneous inputs have been deactivated, I'm still getting a slight feedback hum. There should be no extraneous noise whatsoever. I haven't done this in quite a while, so I've forgotten what I must do. Any help is apprreciated. Thanks very much. Peace,
iBook G3, 1.42 Mac mini G4 DVD±RW Mac OS X (10.3.9) 640Mb SDRAM, 1gb DDRAM

I'm trying to digitize an audio cassette with
Soundtrack Pro. My setup includes a Griffin iMic
that goes to a USB port. The trouble I'm having is
in controlling the input volume. The level meters
indicate clipping, but I'm not clear how to set the
input level.
If it's in the Recording tab (>Input) with the Gain
slider, mine is greyed out.
M Wohlgy,
(I know this is months after your post.)
Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
I use the iMic exclusively.
David

If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

Have a look at Soundflower at this link:
http://www.macworld.com/article/1159440/soundflower_capture.html

Record line in music with Zen Nano 51

how can we record the music with line in?
which line in?
can we use earphone jack as line in?

It's the Zen Nano Plus that has a line in port. It would be on the bottom of the player (opposite end from the headphone jack), next to the USB port and have Line-In written next to it.
There's menu options to recording using it on the player.

Logic Pro when recording audio and midi takes, the regions sometimes become confused. The midi tracks line up with audio tracks.

When recording midi and audio tracks simutaneously the midi tracks don't always line up with the software instrument channel. They may show up on the audio track. Sometimes they appear white instead of the normal green. Any suggestions?

Hey there jlholm,
It sounds like you are seeing some unexpected behavior when you are working on your project. I would use troubleshooting steps 6-10 from the following article named:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Thank you for using Apple Support Communities.
All the very best,
Sterling

Cannot record in creative wave studio / Audigy 2

I have a windows xp x64 machine with a Audigy 2 ZS. I've been able to do?recording through line-in using the creative wave studio and the older drivers for audigy 2 ZS but after I updated to the latest driver I can't get a signal from line-in anymore. I can still hear the audio but it simply won't record it. I'm very sure the setting I used in both wave studio options and the audigy surround mixer didn't change (recording from analog mix / what I hear ). Even the windows built-in?sound recorder couldn't record anything. I see other people posting similar problem but there doesn't seem to be a fix to that. I would like to know?if that really is a driver issue. I want to find the older drivers and stick to that until creative decide to look into that. If anyone knows how to fix this or the location of the old drivers archi've please let me know.
Thx in advanced.

Try this:?Go to "recording devices."?Select the device you are using. Click "properties" of the device you are using. Click "advanced" tab. If your set up is like mine, you will see a window with different recording modes, and a mono recording mode is selected by default. Select a two-channel mode and your problem should be solved.

How can we assign different colours to different records(line items) in alv

how can we assign different colours to different records(line items) in alv reporting?

Hi Friend,
Please see this SDN Wiki for setting the color in ALV :[http://wiki.sdn.sap.com/wiki/display/ABAP/ABAP-DevelopingInteractiveALVReportusing+OOABAP]
There are so many SDN Wiki's on this just try with search Alv Color display in SDN,
Regards,

IDOC Data record is appending with NULL characters instead of spaces.

Hi Gurus,
1) We have created a port with Japanese characters for MATMAS05 (IDOC type) and trying to download an IDOC into an XML file using the ADAPTER, the actual data is less than the length of the IDOC string so we need to append the remaining spaces to each data record which in turn fills the segment pad but whereas in NON-UNICODE server the data record is appending with NULL characters instead of spaces.
2) For Japanese port the receiver port name in XML file is appearing with some junk characters in NON-UNICODE client, whereas in UNICODE client it is displaying the correct port name with Japanese characters.
Your help will be appreciated.
Thanks in Advance.

ORA-06512 indicates a numeric or value-error line 2 seems to show to the first statement.
Check the datatypes of your columns/items.
Try to issue an update manually in SQL*Plus to see if it works generally.

Recording streaming videos with sound

Can I use quicktime for recording streaming videos with sound? If not which Apple software can do it?
Bye Christof

You can use Quicktime to record streaming video +with it's audio+ by using a very simple trick. Using the same cable you connect your iPod/iPhone to your car's stereo system, connect your Mac's Audio OUT to its MIKE IN jack. I used FILE / OPEN URL to select the video stream source, then selected FILE / NEW SCREEN RECORDING. In the resulting 'Screen Recording' dialog box, I set the AUDIO slider all the way to the right, and under the arrow to the right, selected "Built-in Input Line In" for the microphone. I then used the appropriate controls to play the stream and record it. The resultant file was very acceptable. Good luck.

HT2929 record live set with garageband

hi, is it possible to record a liveset with garageband through my mac connected to my mixer ?
rgds niels

niels van der burg wrote:
is it possible to record a liveset with garageband through my mac connected to my mixer ?
yes, plug the console into the line-IN on the mac and set up GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)
however GB would not be my recommended choice, especiall if the recording is to be unattended. if GB throws a modal error dialog it will cease recording; an audio editor is often a better choice:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Using Line Stretch With Frame Property

Hi Folks,
I'm using Report Builder (Developer 2000 ver 6.0) and in one particular report, I would like to have vertical lines between displayed columns from the table.
When I use the Layout Model and draw lines between the columns and use the Line Stretch With Frame Property of that particular line and choose the relevent frame, the line stretches with the number of records ( as I have reduced the number of records to 8 per page) only on pages from 2 onwards. On the first page the line does not stretches. Why is that?
Similarly I would like to draw a line at the end of each record on each page, but when I draw the line in the Layout Model, it is always displayed in the middle of records instead of the last record.
Thanks in advance
regards
Hassan

It's a hardware fault. I suggest you make a "Genius" appointment at an Apple Store to have it tested. It's a free service. The repair won't be free, but if it's something simple, such as a bad memory module, you may be able to fix it yourself.

Can line in, in the audigy 2 nx provide a 7.1 sou

Hi, I connected my mixer to the line in in the audigy 2 nx. I only received 2 speakers working and the sub, while i have a 7. system.(750)
Is there a solution to connect my mixer and receive a 7. surround sound?

Found two different ways to make the VIs for NI-FGEN available. Install with LabView 7.0 support, then either:
1. Functions Palette | All Functions | Select a VI
and browse to the "labview 7.0\instr.lib\niFgen"
directory to select the VI
or
2. Copy the niFgen directory from the LV 7.0
instr.lib directory to the LV 7.1 intstr.lib
directory. This will make the VIs available for
selection from the palette where context
sensitive help is available.
Is either of these a correct choice, or is there a better way?

Vendor Line item with Opening and Closing Balances report regarding

Dear All,
I need a report for vendor line items with Opening and Closing balances.
Thanks in advance
Sateesh

Hi
Try S_ALR_87012082 - Vendor Balances in Local Currency
Regards
Sanil Bhandari

Recording line-in with my Audigy 2

Similar Messages

Maybe you are looking for