Recording Live Footage Straight Into Final Cut X

Does any know the reason why Final Cut X is not capturing my live footage straight from the camera? It is showing me the image but not saving it to my project.

I think it can only capture live footage via Firewire equipped cameras, which basically means the old DV tape camcorders.
If you are using a DV/HDV tape camera you will also probably find that you have to have a tape in the camera and start the camera recording before FCP X will accept the live video . . . which is not a bad thing as you will also end up with a backup copy on tape should anything go wrong with the import.
You can always re-use the tape later.

Similar Messages

How do I record video straight into final cut express?

I'm pretty new to the video editing world, and I can't figure out how to run my camera straight into express to record, if that is even possible. The camera is a panasonic AVCCAM, and its the model AG-HMC40P. It has a usb 2.0 mini out and a hdmi out, but I don't know how to run those into my computer. Any help would be greatly appreciated! Thanks!

This is an AVCHD camcorder. FCE can capture video recorded by this camcorder, but you cannot just connect the camcorder to your Mac and capture "live" video from the camcorder.
To capture/ingest recorded AVCHD video, in FCE select one of the AVCHD Easy Setups that matches how you shot your video, then connect the camcorder to your Mac via USB, then in FCE use the Log & Transfer function to ingest the video from the camcorder.
If you really need to capture live video, you will need to use either a miniDV camcorder ... or use an analog-digital converter to which you would connect the analog output of your camcorder and also the Firewire port on your Mac. The Canopus ADVC-110 or ADVC-300 are examples of good quality converters.
Notes: Your camcorder appears to have an ordinary a/v out in addition to HDMI and Component. You could use the a/v out with the converter. The analog-digital converter will convert the analog output of your camcorder to DV over FireWire. Both methods, of course, will only give you standard-def 4:3 video. In FCE you would select the DV-NTSC DV Converter easy setup and use the Capture Now function to capture the video/audio.

Importing SWF into Final Cut Pro with no Background

Hi Everyone:
I've created an animated macromedia .swf file and imported
into Final Cut Pro successfully just as an .swf file. I can see the
.swf file animate in Final Cut Pro, the only problem is there is a
white background along with my animation. I've seen many slighly
related threads to this problem, but no end solution or work
around. any help? here's what i've seen in posts and other forums:
- create another layer below your object and place a
tranparent color swatch box the size of your stage size
- export the flash file as .mov with an alpha channel
transparency
- export the flash file as a .mov with an alpha channel, then
open in quicktime pro, then re export again as a quicktime movie
with the "Millions +" option.
- i've also heard something about having the right codecs, or
purchasing some other 3rd part software.
none of these approaches have worked for me. My Dream would
be to just import the .swf file straight into Final Cut Pro. I've
been exporting my flash movies as a png sequence and importing
every image into FCP for the time being. I'm also thinking about
just making the background bright green, because i think i just
chroma key it out, but i'm not sure how clean this will be.
here's the related thread:
http://www.kirupa.com/forum/showthread.php?t=242444
Thanks for any help.

You need one of these: http://desktop.thomsongrassvalley.com/products/videoconversion.php to do it properly. The ADVC 300 is the best option for the money.

Capturing AVCHD straight to Final cut express

I have a Canon vixia HF10 camera that films in AVCHD. Mostly i have been importing to IMovie but I am trying to learn how to capture it straight into Final Cut Express. Any Help with how i can import the AVCHD files?

Hi,
You need to plug in your camera to your Mac, turn on the camera, and then go to the Log and Transfer window under the File menu. Your camera will show up there with all your individual files. You can select which one (or even parts of the files) you want to import. It's pretty easy; I have the same camera. Bear in mind, you need to have shot your material in FXP (the highest quality HD) in order for FCE to import it (at least, that's what I've read, and I haven't bothered to test the lower quality stuff for importing). Hope this helps.

How do I import avchd sony cx700 camcorder footage into Final Cut Pro?

I've recently bought a Sony CX700 camcorder, but can't transfer the footage using the Log and Transfer window. Does anybody know how to import AVCHD footage into Final Cut Pro?

You use the log and transfer function.

Importing TV footage into Final Cut

I imported video from a tv show into final cut. When it plays it like stutters... I thought this was just a play back issue and that once I exported it the video ticking would go away but it doesn't. Any ideas on how to fix this?

What format is this TV show? What CODEC? And don't say "It's a Quicktime Movie..." That says nothing. We need to know what TYPE of QT movie. FCP doesn't work with any format you decide to throw at it. It requires that the footage be converted to a few specific Quicktime codecs. And that list can be found in the EASY SETUP menu (in the Final Cut Pro menu).

Ingesting xa20 slow motion footage into final cut 7 or premiere

does canon have step-by-step instructions for ingesting xa20 slow motion footage into final cut 7 or premiere?

Hi davidframe!
Thanks for posting.
Not having made those applications themselves, Canon does not have step-by-step instructions for bringing slow motion footage into Final Cut Pro or Premiere. However, I am sure either Apple or Adobe have some helpful instructions they can provide if you contact them directly.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Getting DVD footage into Final Cut X?

Hi,
I am an actor who has just got Final Cut X and want to edit my showreel on it. I have various dvds of my work. Could anyone please suggest the best way to convert the dvd and get them into Final Cut please?
All the best, Anna

I'm trying to do the same thing. I have an unprotected DVD which I am trying to import into Final Cut Pro X but the "free" MPEG Streamclip software which you mention says that:
"The Apple QuickTime MPEG-2 Playback Component is not installed...
You will miss the two most important features of MPEG Streamclip:
- you won't be able to play MPEG-2 files and transport streams;
- you won't be able to convert MPEG-2 files and transport streams to QuickTime, DV, AVI.
However, all other features are always available, including playback and conversion of MPEG-1 to QuickTime, DV, AVI, demuxing of MPEG-1 and MPEG-2, AC3 decoding, and conversion from transport streams to MPEG files (useful if you have Toast 6).
MPEG Streamclip is free of charge but the MPEG-2 Playback Component has a small price (around $20/£15/€20 in most countries); you can buy it online from Apple:
http://www.apple.com/quicktime/mpeg2"
Hm....How do I get the right format for FCP X?
Thanking you.
Mitaka27

Bizarre results importing imovie into final cut express?

I have filmed different interviews which were captured in imovie. I am now trying to import them into final cut express. But when I import one interview called, say, Gavin I get Karen's interview instead. The clip is labelled Gavin but the footsage is from a different interview. No matter who I import I get a completely different project and there is no rhyme nor reason to the footage that opens up.
Basically I get the wrong footage with every clip I open.
Please help before I end up in the loony bin!
Exasperated,
Clare

I bought Final cut express just after capturing all my files in imovie (having heard that it was supposed to be easier to cature and trim in imovie before sending the files to fce - is this what you have heard?). If it weren't for a solid week capturing and trimming 40 hours of film I would recapture in fce!!
I have even replaced the captured media within the scratch folder but still it opens the wrong files.
The files are labelled as the interviewees name. All the books say that you can import imovie projects into fce and then render and save as fce files.
I have tried various methods of importing, opening and even dragging a clip straight from imovie into the browser of fce - which works but opens an original untrimmed version rather than the short trimmed version and again it will be an interview of the wrong person.
I have since been turning the imovie files into .mov files and opening them in fce - this seems to work but hope there is no change to quality.
Would this be the way to go? I would so appreciate an answer!
Thanks

Unable to capture from the Panasonic AJ-HD1400 deck into Final Cut

I am working on a project where I need to use the Panasonic AJ-HD1400 deck and import 720p footage from the Vericam into final cut. I am able to connect to the deck via firewire but when I playback footage or try to capture I get a black screen and error message saying that FCP isn't getting a video signal.
I have tried multiple capture and sequence settings, none of which have worked. The one I have read that I am suppose to use is the easy set up for DVCPRO HD 720p24.
The footage is shot from the Panasonic Vericam which shoots at 60 fps. The footage has been flagged both 24p and 60p during different takes. - Which I have read you are suppose to convert using the DVC PRO HD Frame Rate Converter after it has been imported.
Anyone out there know how to solve this issue,
-Steller

Have you tried trashing your prefs?

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Video quality changes when imported into Final Cut Pro

I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
Current Size: 1,440 × 810 pixels
Will I need to do anything to those as well?
Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

Best way to export from Motion 2 into Final Cut Pro 5, working in DV?

I am working in DV in Final Cut Pro 5, and I would like to get the best quality from anything I bring in from Motion 2 into Final Cut Pro 5, I keep hearing use the Animation codec. I would like to hear from the Panel of experts.
Happy Thanksgiving,
Sebastian

The Best way is to round-trip from FCP. Or simply import the .motn file directly into FCP. If you require an alpha channel and for some reason don't want to bring the .motn file in, Animation with millions+ for the colors (+ is the alpha channel) will work, But if you just want straight DV, you should export a DV file.
Patrick

Recording Live Footage Straight Into Final Cut X

Similar Messages

Maybe you are looking for