Recording MIDI and audio simultaneously

I just tried something new in Logic Pro 7.1.1 that didn't work the way I expected.
I have a set of Roland V-Drums that output both audio and MIDI. I tried to record both using an audio track and the MIDI drum track. I also tried recording using an audio track and a virtual instrument track. In both cases, I could only record on the currently selected track (either audio or MIDI) but never both.
On all the MIDI tracks, the record button won't stay lit unless I have the track selected. And if I select a MIDI track to keep the light on, the audio track won't record even though its record light is lit.
Any ideas?

You need to have both the MIDI track and at least one Audio track selected. Here's an answer with a picture:
http://www.logicprohelp.com/viewtopic.php?t=4099

Similar Messages

  • Can't Record Midi and audio  Simultaneously

    I just noticed that I cant record audio and midi simultaneously. I wanted to record a audio vocal track as I was recording a midi piano track but it wouldn't record. If I selected the audio track, the midi track wasn't heard. If I selected the midi track, I could hear the piano, but the audio wouldn't record. Weird. I had to record the midi track, and then go back and arm 2 audio tracks for recording. One for the vocal and the other to convert the midi track into a audio track. I don't understand why I can't record midi and audio at the same time. I am using a MOTU 896HD for my audio, so I can record up to 8 audio tracks at a time.
    Does anyone have any clues as to how to set this up to record midi and audio at the same time?

    Setup your audio and midi tracks and then hold the shift key and hit the record button on each of them. Both audio and midi will record.

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • How to record midi and audio at the same time?

    Hello,
    I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
    Thank You.

    Hi
    Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
    The audio track must be 'Record Ready':
    HTH
    CCT

  • Recording MIDI and Audio at the same time....

    I am having an issue recording a simple piano softsynth along with a guide vocal. Whenever I punch in, the audio punches fine but the MIDI/softsynth track hiccups, causing a lag in sound even though the MIDI info seems to record fine. Also, this does not happen when recording MIDI alone-everything punches in fine. Is there some setting I'm missing somewhere or is Logic not able to do this smoothly? Any help would be greatly appreciated. Thanks.
    Message was edited by: dbboy

    Hi Fred,
    I bring you my wisdom...Yes there is hope.
    What you need to do is set the part you want to bounce into cycle mode. Dont worry, it will not cycle, it just knows now where to start and stop.
    Audio and Midi can be recorded at the same time, as long as the midi is from an AU within the mac and not from an external source.
    Good luck,
    Joe
    There is always hope

  • Bouncing, recording MIDI and Audio at the same time

    This is 2 questions. Thanks.
    1. Each time I go to bounce a song, I have to enter the start and end again. I wish it would just remember form the last bounce. Is there hope?
    2. Can I record an audio track and a MIDI track at the same time?
    thanks,
    fred in San Rafael, CA

    Hi Fred,
    I bring you my wisdom...Yes there is hope.
    What you need to do is set the part you want to bounce into cycle mode. Dont worry, it will not cycle, it just knows now where to start and stop.
    Audio and Midi can be recorded at the same time, as long as the midi is from an AU within the mac and not from an external source.
    Good luck,
    Joe
    There is always hope

  • Recording MIDI and audio simultaneosly

    How can I record my usb midi keyboard at the same time as an audio track.

    Simply shift+click the record button to arm multiple tracks i.e. multiple audio-audio&MIDI- Audio instr.- etc
    Happy recording

  • Replace mode midi and audio

    I hope I'm missing something. when recording midi and audio at the same time, with merge and replace turned on, the midi is ok but the audio is NOT in replace. Is there a way around that. If not does logic have a play what's on top structure like nuendo? I need to emulate a tape machine as closely as possible in this application
    Thanx

    I hope I'm missing something. when recording midi and
    audio at the same time, with merge and replace turned
    on, the midi is ok but the audio is NOT in replace.
    Is there a way around that. If not does logic have a
    play what's on top structure like nuendo? I need to
    emulate a tape machine as closely as possible in this
    application
    Thanx
    i am not sure if this answers this. Your audio is not sounding like a tape machine?
    Try inserting an au unit like: Tape delay, Stereo Delay, or Sample delay, which are all within logic.
    If you want the full effect place it in the insert. If you want a partial effect send it as a bus.
    I hope this helps.
    Dual G 5 2.5 ghz hightower     1 gig
    Dual G 5 2.5 ghz hightower   Mac OS X (10.4.5)   1 gig

  • Midi and Audio tracks simultaneously armed for recording

    All, whilst engaged in laying down the bass track for the guitar solo section of my latest monster his, I encountered one of those sorts of frustrations that makes one long for some means of swift egress from this mortal coil, this vale of tears: that is, while laying down my totally awesome bass track that when they hear it will send JP Jones and Boosty Collins to employee as actuaries, I kept getting the hateful "unable to synchronize the audio and midi error." I'll spare you the catalog of the various lame attempts I understood to remedy this problem, as well as the curses directed toward my fate, and Daw ineptitude in general. Then I nnoticed that both the software instrument tracks (Addictive drums) and the audio track (aforementioned bass) were both armed for recording, signified by the red R in the track header! Well, upon de-arming the software instrument track I was able to record by bass line in a mimimum of takes, and as visions of illegal intozicants and comen of questionable morals dance through my noggin as recompsense for my trouble, with to make the point to all relative newbies such as myself that the answer to problems that seem on surface intractable as usually staring you right in the glazed eyeball.

    What?...
    I'm sorry maybe I don't understand everything you are sayng... but I can replay to the titles of the Topic!
    Actually recording a MIDI instrument and an Audio Track symultaneously comes with serious bug!!!
    you cannot use Punch-in on Fly when an Audio and instrument track is armed at the same time...
    or better you can but the MIDI and audio output will be dropped for a moment
    Provide a Logic feedback
    http://www.apple.com/feedback/logicpro.html!
    THIS IS A LOGIC 8 BUG!!! BIGGEST SERIOUS BUG!
    I suggest you to use Logic 7 when you need that!
    Thank you so much for remember me this..
    I'm sorry no alternative solution... or.. if you have 2 Macs you can use one for Logic MIDI and another one for Logic Audio!
    G

  • Error Garageband - can't sync midi and audio

    I have no midi attached but still get an error message "Can't sync midi and audio".
    All I am trying to do is record a voice-over using the built in mic on the iMac.  But this error message keeps popping up constantly.  I close it and then 10 seconds later it pops up again.
    Why is garageband trying to sync a mid that I have not connected?

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • MIDI and Audio playback not syn

    I use a couple of multitracking software, to record MIDI and vocals. These programs worked well on my old PCI 28, but I recently bought an Audigy LS(best one that still worked with Windows 98). Now when I record the vocals, and play them back, the wave file is slightly out of sync with the MIDI file, so at the end of a four or fi've minute song, the MIDI ends 6 or 7 seconds before the vocals do, even though they were sung while the MIDI was playing. Any idea what the timing issue is here? I have a dual-boot system with Windows XP Pro, and it acts up in here too. The two programs that I use are Cool Edit 2.0 and Voyetra's Digital Orchestrator Pro.

    brebs wrote:You're probably playing audio through ALSA's emulation of OSS, which means that dmix won't work. You need to output to *ALSA*.
    I just tested it out myself. First, I experienced the same problem that you did. Mplayer wasn't able to play any audio because is said the sound device was locked or in use or something silly. In Tux Guitar, I disabled the JACK and OSS plugins (and a lot of other plugins) and changed the sound settings to "TuxGuitar Sequencer" and MIDI Port "TiMidity port 0 [128:0]. (I have timidity setup as my MIDI "hardware", like it is described in the Arch wiki) After that (and rebooting), I was able to play a TAB file and an MP3 in mplayer at the same time.
    Let me know if you have any questions about what I did.
    DISCLAIMER: This was a simple test. I don't use (or know how to use) Tux Guitar.

  • USB/Firewire Interface for MIDI and audio (Garage Band)

    I want to connect a Roland Handsonic (electronic drum) and Shure microphone to a Mac Pro for recording in Garage Band. What is the best USB/firewire interface for MIDI and audio?
    Mac Pro desktop   Mac OS X (10.4.8)  

    If you click one of the links you can read all about it in depth.
    three guitarists
    That's not what you asked for B-)>
    Once you want more than 2 audio inputs, the prices start jumping up dramatically.
    would this be the best interface to use?
    If you really want "Best" then it's a simple answer:
    http://www.bulletsandbones.com/GB/FirePod.html

  • Logic i/o midi AND audio?

    im trying to use the Logic i/o plug in , not sue if im doing it right?
    I have a sound module thats going into my 828mk2 inputs (11&12) and midi set up.
    I can play the module fine from Logic but i thought that when you used the i/o plug in you could set up ONE track to use (like a internal plug in) that became the midi and the audio in order to record the track?
    Do i have to record on a MIDI track the part from the module and then use a different audio track to capture it?
    Im sure once i used a instrument track with the i/o on it and it became a midi/audio track all in one for outside gear? so i could record/midi all within the one track?
    Am i being stupid?

    so how do i use the external instrumnet and the i/o together?
    External instrument on the instrument slot on a software instrument channel. This handles both MIDI and audio routing. What do you want to use the I/O plugin for? If you want to route to external hardware, then put the I/O plugin on one of the FX inserts on that software instrument channel.
    Can i make my hardware become like a VST? and if using both utilities can i render a file to audio like i can a vst?
    No, you have to record it in the conventional way.
    or does it have to be real-time bounce only?
    Yes, external instruments have to be played in real-time. Logic cannot yet speed up the universe to perform faster than realtime bounces - at least, not in Logic 8...

  • Midi and audio in quartz composer.

    I am fairly new to quartz composer. Does any one know how to set up the midi input or controller in it? I can set up a basic image, but it will not respond to me playing my midi keyboard. I am so lost.

    You just select Midi and Audio tracks while holding down the shift button. Arm both tracks->select the Midi track first (click into track header) ->hold down shift->select the Audio track->both track headers turn grey->record->have fun...

  • Experiencing Delay Between Midi and Audio MOTU 828 Mk1

    Hi everyone
    Wondering if somebody can point me in the right direction. I'm using an Intel iMac running Leopard 10.5.8 and Logic 8. I just got hold of a MOTU 828 MkI and am experiencing a severe delay between midi and audio.
    Clock source is set to internal in the 828 settings and sample rate is set at 44100, so that's all as it should be.
    I'm at a loss has anybody got any ideas?
    Many thanks.

    Hi,
    I assume MIDI is earlier than audio.
    Do You have plugins in busses and or master outputs?. Try to disable them and see if that still happens.
    Here I had issues with 9.01 that aren`t plugin related and had to reboot to solve it. I upgraded to 9.02 and didn`t see them again (yet.)
    If you HAVE to have your plugins in the busses and master and still want to have your MIDI properly aligned... Well you´re asking too much, my friend. Write a polite letter to Apple telling them if they´re joking calling Pro to this app that can´t keep two basic features in sync. BTW: same happens with video (at leat in L8. Didn`t check 9 with that yet)
    After that, breath deeply and use the input objects to route your midi instruments inside Logic. Then they´ll be in sync, but at the price of loosing all their analog warm. Weird, isn´t it?

Maybe you are looking for

  • Ipod nano white screen and not turning off

    hi I bought a new mini pioneer stereo/dvd and put my ipod nano on it yesterday.. no probs it played.... but today i put it on the dock and all that it showed on the screen was a white screen with "ok to disconnect" on it... I took it off and now it i

  • Hah! You Can Turn Off The Load/Working Messages In Library

    In View/View Options/Loupe View unchecking the "Show message when loading or rendering photos" will stop the annoying Loading/Working messages in the Library module, but not the Develop module.

  • Where is all the music i uploaded from an old computer?

    I've recently purchased a new computer. All the music that I ripped and uploaded to iTunes is now not in my library. How do I find that music?

  • Error "Expcted EOF", how do I resolve it?

    Dear! When I attempt to install Oracle Provider.net into my PC, one error encountered as "Expected EOF", and I did not install. How do I resolve it? Thank you!

  • Scaling down hd into a dv sequence

    my 1080 hd clips need to be incorportaed into a dv sequence but when i export them as quicktime and then import that quicktime into a dv sequence, it looks soft. is there a better way? copy, paste and then scale down perhaps?