Recording midi music as a WAV f

For years I've been using a Soundblaster card and the software I got with it (Midi Orchestrator). Making WAV files, and putting them onto a CD was a simple matter.
I recently bought a new computer with Windows XP and on-board sound. I was delighted to find that Midi Orchestrator works fine on it, but to my surprise I found that I can only record from a microphone or Line-in, not from an internal source.
Having cursed Windows XP for this, it occurred to me that maybe it's the absence of the Soundblaster card. Can anyone tell me if the card comes with software which would enable me to record as WAV files? I'll willingly purchase one if it does.

hey im looking for some help, all i need to know is how to record my cd/ digital turntables. i select all of the inouts and none of them work , i cant hear the music can you help please?

Similar Messages

How to record midi into iPad

Which components do I need to record midi from my keyboard into the iPad (including midi app?)? I just want to see the recorded sheet music. The keyboard does have midi output.

Create a master folder to contain your photos. Organize your photos the way you want them putting each group into its own folder inside the master folder.
Then start iTunes on that computer and connect your iPad.
Select your iPad in iTunes on the computer.
Select Photos in the row of tabs on the right side of iTunes.
If you select the master folder, the folders nested inside will all become separate albums on your iPad after you select Apply or Sync.
Instead of copying all the albums to your iPad you can select individual folders to sync to your iPad.

Recorded midi file with Garageband keyboard-only the beginning of it plays

Hi,
When i play a recorded midi sound from the jampack with the midi keyboard included (world music instrum.), once the track is recorded, if I start to play it and press stop in the middle of a long note, and press play again, the last part of this note isn't heard. It's no big deal, but for editing it's a pain in the neck because in order to hear the sound I have to go back to the beginning of that same note. Anyone here knows what this can be due to?, Ive checked the garageband help and not much is said about that...
Thanks for the help.
Patrick.

It's not a GB problem, but inherent to midi - the data consists only of "note on" / "note off" events, not continuous information about a key being pressed down. So if you start playing your song after the "note on" event, the program has no way of knowing that the key was pressed earlier. It then just ignores the "note off" event.

Audio recording also recording midi mute events. How to remove

Greetings...
I new to Logic, recent convert from Cubase. Anyway I have an odd problem. When I record a stereo audio track and Logic seems to be recording Midi control data events as well. To be specific I have a Tranzport controller that I use to start and stop, mute record etc. Anyway I have an audio track that sets the mute when I start playback, all by itself. Then after a bit it turns off the mute. Seems to be midi commands that were captured as part of the control track that associates with the audio track.
Anyway my problem is that I can't find where this midi mute even is stored in the project. I just want to remove it but I'm at a loss as to where it is stored. I had a control track that I found and removed that and it seemed to take out most of the midi control events but not all of them.
Sorry if my terminology isn't quite Logic but as I said I've come from a different environment.
Anyway I hope this makes sense enough to have one of you point me in the right direction.
All in all I'm really enjoying Logic Express!!
--Bryan

Hi...
I checked the automation display and it shows 0db throughout so that is not what is muting the output.
However you said "In the midi track did you search in the Even List Editor". Well that is kind of my problem. I don't have a midi track. Only audio takes in a region. When I play back the region the output starts muted (mute light on) then the mute goes off (light off sound on) for a measure and then mutes again for another two measures. Then mute goes off again and the recorded music plays back normally from that point on. This is why I think Logic has captured my control surfaces Midi mute events. I had one take where I pressed the mute button on my Tranzport a couple of times at the start of the recording. These events are captured and repeat each time I play back the recording. I just can't find where those events are stored. The event list only shows the Comp and two takes, no midi control events.
I hope my description makes sense. I'll keep looking. The midi data must be somewhere in there, it's just sitting there laughing at me.
Thanks..
--Bryan

Syncing MIDI music

I am using Window 7 for iTune and iPad, I wanted to sync MIDI music to my ipad. But it didn't work. Why?

Is MIDI is no one of these formats it can't be played by the iPod app.
Audio formats supported: HE-AAC (V1), AAC (16 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV
There is Midi Player 2.0 available in the app store

I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic but Logic won't send midi data out to the MOTU Traveller to the Piano Disc player

Hello All,
I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic Pro 9.1.8 but Logic won't send the midi data back out to the MOTU Traveller and thus to the Piano Disc player. I got it to playback one time but have no idea how and when it did it was looping or something because the velocity was way high coming back in and the damper pedal was slamming down. When I play a key on the piano the midi "in" light on the Traveller lights up. When I play the track back on my computer no lights blink on the Traveller and when I did the apple midi studio test in utilities when I play a key I get the confirmation signal noise and the Traveller blinks when I click on the down arrow of the Traveller in the Apple midi studio test the midi out light on the traveller never lights and the signal light on the piano does not blink either. No outbound signal at all...
I have messed with every possible parameter I can find and and have had help from one of Piano Disc's premier editors but no luck. The piano was prepped for me on Logic so it would work with my studio. I'm positive it's my fault and I'm overlooking something really simple and stupid but what!??!
Somebody please help. Thank you all in advance for ANY ideas you might have!

Blues Piano,
I'm not sure if this will be a help or not. I'm so Logic Pro wet behind the ears that I make newbies look experienced. However, I'm not expecting many on the Apple support forums have a PianoDisc system, much less one with the new optical record strip. While I don't have any record strip on my PianoDisc, I do have a PianoDisc iQ that's only a month old. I've been playing converted paper scrolls from hundred year old player pianos through it via the MIDI in port of the PianoDisc CPU. I've found I have to open the MIDI file in Logic Pro (10.0.4) then go to <Track><New External MIDI Track> then copy the existing track to that new external track. Only then can I see in the Track inspector (defaults left side of screen with the Icon for the instrument) the "Port" parameter. Then I can select my external MIDI device in that Port selector.
I've also encountered problems with the PianoDisc not using enough force on the notes or using too much force. To get around this problem, until I understand Logic better, I've been setting minimum and maximum volicities. To do that I right click on the track and select "Select All." Then I right click again and select "MIDI" then "MIDI Transform" then "Velocity Limiter." In the resulting pop up window in the center is a drop down and you can play with the velocity from "MIN" to "MAX" along with "ADD" "SUBTRACT" etc.
I hope this helps. I envy you your Mason & Hamlin. If you need more help on this just email me at pfleischmann at mac dot com.

What is the best USB 3.0 (small) ext HDD for recording my music on

Hello everybody!
i start with saying...........
A Happy Newyear!!!!!
I wish you all the very best and love.
Now for my question.
I would like to know what is the best portable usb 3.0 external HDD for recording my music on.
Because since today i am a very happy new owner of the new Retina Macbook Pro 2.3 GHz, with 8 GB of Ram and 256 GB of Flash.
.... and yes it has the Samsung Retina Display
Since 8 years i use Logic Pro and because the flash is only 256 Gb i want to record on a external drive
and not on the internal storage (and especially now with usb 3.0).
But i would like to know what is the best portible external HDD for this function.
500 GB is enough for me because i have 2x a 2 TB for my Mac Pro and Macbook pro where i make back ups from all my music (2 back ups just to be safe).
Some Examples i saw:
- WD My passport USB 3.0 - 500 GB harde schijf
- G-Technology 500GB G-DRIVE Slim USB 3.0-harde schijf
- LaCie 500GB Rugged Triple USB 3.0 externe harde schijf
- Freecom Mobile drive mg 500 GB harde schijf
- Western Digital My Passport Essential SE USB 3.0 500 GB harde schijf
I would really like some good advise in this.
Hope you guys can help me out with this.
Greetings,
Glenn Cornelisse
Gaya Productions Studio
The Hague, Netherlands

I cannot speak specifically about any of those Ext HDs because i don't own any of them..
But...
Make sure the external drive is 7200rpm.... and not 5400rpm or a 'green' drive with something called "varipower' or a similar name...

Recording MIDI and Audio at the same time....

I am having an issue recording a simple piano softsynth along with a guide vocal. Whenever I punch in, the audio punches fine but the MIDI/softsynth track hiccups, causing a lag in sound even though the MIDI info seems to record fine. Also, this does not happen when recording MIDI alone-everything punches in fine. Is there some setting I'm missing somewhere or is Logic not able to do this smoothly? Any help would be greatly appreciated. Thanks.
Message was edited by: dbboy

Hi Fred,
I bring you my wisdom...Yes there is hope.
What you need to do is set the part you want to bounce into cycle mode. Dont worry, it will not cycle, it just knows now where to start and stop.
Audio and Midi can be recorded at the same time, as long as the midi is from an AU within the mac and not from an external source.
Good luck,
Joe
There is always hope

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

BPM from (externally recorded) Midi recorded drums at incorrect tempo when importing into Logic?

Hey there
Yesterday I recorded midi drums to a click track for a song into my iPhone using an IK Multimedia iRig Midi.
I had the click track playing from my iPod (that I had recorded as an mp3 at 148pm) and I recorded the drum beat for the whole song at 148bpm into my iPhone using the iRig Midi Recorder app.
I exported the file from my iPhone to my Mac.
Just to note:
When I play the file through QuickTime it plays fine at 148bpm OK.
If I import the midi file into iTunes, iTunes plays it at 148bpm, and even if I convert it to an mp3 using iTunes, iTunes STILL plays it at 148bpm.
So, if I right mouse click the .midi file>open with Logic
It opens in Logic (With the project set to 120bpm) and the midi track plays at 148bpm, with the metronome playing at 120bpm.
If I then change the BPM of the project to 148bpm, it then changes the BPM of the midi drum file to 183bpm, with the metronome playing at 148bpm.
So, I've tried it another way
Create a new Logic project, set the BPM to 148bpm, then IMPORT the .midi file.
But the midi track plays at 183bpm, with the metronome playing at 148bpm.
So there still the same problem.
I NEED this to line up perfectly with the click track at 148bpm, otherwise I many as well just recorded it live and not to click.
Any suggestions on whats going on here, because something isn't right.
Thanks

Just to note
Ive tested the bpm of the song using a little program called VOX (from the exported iTunes mp3 file) and Vox states its 91.51bpm (Making it 183.02 bpm in my mind)
(I initially tested the bpm manually using http://www.all8.com/tools/bpm.htm, so I'm not bad only being 0.02 bpm out)
I've had just tried the following but its still not right.
I imported the midi track into Garageband and set the project initially (Before importing) to 183bpm and assumed I could just then change the projects bpm to 148bpm.
This doesnt work either.
Upon import of the midi file to GB with the project set at 183bpm, it then plays the midi drum file at approx 227bpm. So its actually sped it up. (tested manual BPM test using http://www.all8.com/tools/bpm.htm )
If I take the projects BPM down to 148bpm, it then plays it at 182bpm (tested manual BPM test using http://www.all8.com/tools/bpm.htm )
If I take the projects BPM down to 120bpm, it then plays it at 148bpm (tested manual BPM test using http://www.all8.com/tools/bpm.htm ). Ah-ha! You might think, so thats fine. Well, yes it plays the drum beat at approx 148bpm, BUT the system still thinks its 120BPM, so it wont line up to the click track at all.
I NEED this to line up perfectyly with the click track of 148bpm, otherwise I many as well just recorded it live and not to click.
Any suggestions?
Thanks

Recording from Music Files onto diskette type CD-R

Why can't I record stored music on CD-R? Evidently only plain CD works.

Hello Jemand der Deutsch spricht,
Please explain a bit about the requirement.
Do you mean that you want burn music to CD?
If so please take a look at the following article about burn music in Windows.
http://windows.microsoft.com/en-hk/windows/burn-cd-dvd-media-player#1TC=windows-7
1. Confirm the CD is blank ,You can use either a blank CD-R or CD-RW disc for burning in the Player.
2. Use the Windows media player to burn the music to CD.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Recording midi with a keyboard using uno

hi im using audition 3.0 and im using a midisport uno to record midi, ive got it to detect the notes when i play on my keyboard, but when i record in my midi track nothing records??? ofcourse i can record the visti manuely by pressing the virtal keyboard but i cant seem to record using my keyboard controller. can some one please give me a clear and step by step instrution on how to record midi using uno.

make sure of:
- you have the track ready to record
- in the sequencer you have to enable the record AND chose the channel, if you dont know just try ALL
- make sure that you have chosen the right input, you will find these button at upper right corner.
i wish I have helped...

Safari not playing embedded midi music clips

I recently noticed that embedded midi music clips in Apple Mail and in Safari do not play. Basically, I am referring to background music one often hears while going to some web sites. Particularly those individual web sites folks have created. Of course, many on this forum, who have never been a Windows user and specifically, Internet Explorer, probably never realized there even was any background music.
This is not necessarily a issue for me, but it is for my Mom ,who, along with many others her age, like animated graphics and music in their emails and web sites.
I still can't believe Apple Mail and Safari can't auomatically play embedded midi files. Especially given that Internet Explorer and Outlook Express can.
Many one option is using Firefox and Thunderbird for a Mac?

Hi,
I still can't believe Apple Mail and Safari can't auomatically play embedded midi files. Especially given that Internet Explorer and Outlook Express can.
Safari can provided the page has been coded correctly. Many sites that add sounds use the <bgsound> tag which is only supported by Internet Explorer and not part of the HTML standard.

I would like to sign-up for an e-card web site. However, I am not able to hear the music on the web-site. It says that Apple does not support MIDI music. Why is it Apple does not support MIDI music and what can I do about it?

I recently had wanted to sign-up for an e-card web-site. However, when I clicked on the web-page, I am NOT ABLE TO HEAR ANY MUSIC. The message shown is that Apple does not support MIDI music.
What other software can I download in order for me to listen to the music on this web-page?

Systran wrote:
I recently had wanted to sign-up for an e-card web-site. However, when I clicked on the web-page, I am NOT ABLE TO HEAR ANY MUSIC. The message shown is that Apple does not support MIDI music.
Please don't tell my wife this, she's been working with MIDI on her Mac(s) since the turn of the century...
The statement from that web site is completely incorrect. What they probably meant was that their software doesn't support Mac. IMHO this is a sign of either ignorance or lack of concern on the part of the site creators. Back in the dark ages a lot of PC apps didn't support Mac but not these days.
Get into your Mac Help window and search MIDI. There's plenty of info there on how your Mac supports MIDI.

MIDI Setup - I can record MIDI but not hear it.

I have reviewed other posts on the site. No luck getting this going yet. I can record MIDI but can't hear the sound on Playback.
Here are some pics showing my setup. I am using a Roland XP 60 through a Midisport 2X2.
http://www.guitarpsycho.com/helpwithlogic/
I can see the data was recorded from the keyboard but am not getting any sound when I play back.
This is probably simple but I am not finding the answer here. Any help is appreciated!!!

I am trying to play the Roland sounds. I was able to use the keyboard as a controller using the Quicktime Template which was pretty cool but I want to access any of the Roland sounds.
Are you saying that I should only run the keyboard in and not have a MIDI out connection?
Anyway Thanks! I will check the multi-instrument setup after work and let you all know what I figure out.....hopefully tonight.

Recording midi music as a WAV f

Similar Messages

Maybe you are looking for