Recording mixer for F756NR notebook

Hi All,
 I have been using a Presario F756NR notebook for awhile and revisted an old chat client. This chat client uses recording mixer(like in xp). I did some searching on how to get to this in vista. I found a website that suggested enabling hidden devices in the recording tab of the Sound applet of control panel. My computer is a Presario F756NR notebook using Vista 32 - bit. The purpose for wanting/needing the recording mixer is to play mp3's though sound card in this chat client. Any and all help would be appreciated!

Hi all,
 Just for some further clarity, I tried the show hidden devices and nothing happened. i've since scoured the web for info. This is what I found from another board:
 Here is official answer from Microsoft:
http://www.stereo-mix.com/stereo-mix-issues/no-stereo-mix-for-conexant-hd-audio.html
So, you have only one way:
http://www.stereo-mix.com/stereo-mix-issues/stereo-mix-not-supported-here-is-universal-solution.html
BUMMER is all I have to say...the second link is not recomended. Suggestion: if you choose to pursue that route start with volume low so you dont damage your sound card!!

Similar Messages

  • Info please...control surface and mixer for fcp and audio recording

    i'm looking for a control surface for final cut pro and also xlr/line inputs for recording guitar and vocals in cubase or audacity.
    read all the info here after numerous searches. still some questions.
    was looking at the tascam 1082 but not sure of the build quality...i saw one and it looked a bit cheaply built. the two demos at guitar center were falling apart. didn't look nearly as well built as the mackie. also i have been reading here and elsewhere about bugs/problems etc.
    was looking at the m-audio...not sure about that one...$1250...
    was also looking at mackie control surface...but no firewire...how do you hook it up to a mac? also no audio inputs. what would i need to buy to work in conjunction with that for recording audio? if i bought the mackie, i'd still have to buy an audio inpur device and that would end up costing as much as the m audio.
    i know i could just buy a mixer for recording and forget the control surface...i already have a shuttle pro which works fine and i have gotten used to using the mixer in fcp...no problems. but the motorized faders on a control surface sure would be nice
    so questions:
    how does the mackie connect to a mac and what other device(s) would i need to record audio and how would they hook up...would they play nice together?
    ppl who own the tascam...happy with it? used the mic and line preamps? are they noisy?
    do i need an additional firewire bus reguardless of which control surface i get?
    how does one route the audio for these when in fcp? i currently route my audio through my dsr 11 deck. will the control surface just go through firewire or would i have to actually jack into the control surface with additional cables and have to remove my present cables from my speakers everytime i want to use the control surface?
    sorry so many questions. it's really tough to make an informed decision in buying something if you don't understand the mechanics of it.
    btw, appreciate the info so far that i found doing my searches.
    thanks
    carl

    I've got the Tascam FW1082 and I absolutely love it. I can't believe I ever edited without it. I'm considering upgrading to the 1884 in the future.
    As for the mic preamps, they sound great. Nice and clean. There's no such thing as a line preamp, but the line inputs are clean as well.
    For routing, I go to the 1082 via firewire until I turn on my external video monitor, at which point I send both video & audio to the deck and route the audio from the deck into a pair of the mixer's analog inputs. That way you avoid the delay of external monitoring. The 1082 allows you to listen to both the computer & the inputs at the same time, so switching back and forth is seamless.
    As for durability, I've had it out on a few location recordings, but most of the time it's on my desk. It's still in mint condition. I'm sure if it was on a display where any 10 year old could come mess with it, it wouldn't be in as great of shape, but then again, a Neve console wouldn't look that great if every little brat that walked in the door could play with it. If you take care of your stuff, you'll have no issues with this mixer.

  • Is there support to stereo mix record channel for windows vista or at least XP ?

    i have lenovo N500 and conexant HD smartaudio 221 on board with windows vista.
    i read somewhere that smartaudio don't support stereo mix record channel in their driver for vista.
    do they support the stereo mix record channel for windows XP ?
    (i tried to ask them in their site, but couldn't manage to do that)

  • Is Logic Pro the Best Audio Recording Software for Mac?

    Couple questions. I do a lot of audio production and work currently. I use a gateway with Cubase, and its not bad, but I feel like I need something mroe high end.
    I'm looking at the 17 inch Imac. Does anyone record using this computer? How's it sound? Is there any way to put in a new soundcard or something if i don't like the current one?
    Secondly, is logic pro the most advanced and best audio recording software for the mac? Are there others as well?
    I know about Pro Tools, but it seems like there isn't anything high end enough that is TOO high end.
    Does the Pro version have superior mixing capabilties. I am primarily going to be micing a guitar amp and having a mixer run into a firewire port, and also using a preamp for my guitar direct into the computers USB.
    Lastly, how are the mixing features on Logic Pro vs. Logic Express? I do a lot of post production mixing as well, and use VST plugins. Speaking of that, will it accomodate using a drum program like BFD through VST or Midi like Cubase will?
    Thanks for your time guys.

    Couple questions. I do a lot of audio production and
    work currently. I use a gateway with Cubase, and its
    not bad, but I feel like I need something mroe high
    end.
    Yes, you do indeed need sth more high end.
    I'm looking at the 17 inch Imac. Does anyone record
    using this computer? How's it sound? Is there any way
    to put in a new soundcard or something if i don't
    like the current one?
    It's not an iMac, but a faithful PowerBook G4 that I am using. Apples Core Audio is awesome. Your sound, however, will depend on your interface.
    Secondly, is logic pro the most advanced and best
    audio recording software for the mac? Are there
    others as well?
    That's why we are here, and that's why you ended up in this forum as well
    To me personally, Logic sounds warmer and bigger than any ProTools system I've ever heard. From what yopu described as the work you need to do, there is no comparable application. Logic also offers you many more features above and beyond what you currently need to do.
    I know about Pro Tools, but it seems like there isn't
    anything high end enough that is TOO high end.
    Everybody is using PT, and you should maybe get a Light Edition version of it. However, as stated above, Logic offers by far more possibilities.
    Does the Pro version have superior mixing
    capabilties. I am primarily going to be micing a
    guitar amp and having a mixer run into a firewire
    port, and also using a preamp for my guitar direct
    into the computers USB.
    For your purpose, Logic does have superior mixing capabilities. In my humble opinion, only the popularity of PT made it become the choice of studios and engineers, but things are turning...
    Lastly, how are the mixing features on Logic Pro vs.
    Logic Express? I do a lot of post production mixing
    as well, and use VST plugins. Speaking of that, will
    it accomodate using a drum program like BFD through
    VST or Midi like Cubase will?
    If you do post production mixing, forget about Logic Express altogether and go for Logic Pro. LP will accomodate tons of plug-ins, and it comes with a bunch of great one's as well!
    The format for the plug-ins is called A(udio) U(nit) and works flawlessly. Many VST plug-ins are also available in AU format and the development of those is moving fast forward.
    In other words, yes, you will be able to use BFD in Logic by means of the AU format.
    Thanks for your time guys.
    You're welcome.

  • Stumped on how to create a flexible monitoring mix for a four piece band

    I am recording a four piece electric jazz group "live" in the studio (my garage). I run logic 8 on a 2.4 Ghz MBP with 4 Gb of ram. I have a Presonus FP10 which gives me 8 analogue ins & outs. I also have a cheap Behringer 4 channel h/p amp HA4700.
    My question is: is there a way to create a monitor mix that is from within logic that is both flexible and usable. ie close to zero latency ?
    I have set up 4 buses in the mixer that I can send signal to from each of the instruments (sax, keys, bass & rum submix) and assigned these to outputs 3-6 which i then run to the aux in on each channel of the h/p amp. This has worked but i am getting some latency.....how can i fix this......can i ? It's actually not too bad, but when i can=me to using the same set up to do some overdubbing later it was un-usable.
    Any suggestions gratefully accepted!

    Do you need to have 4 individual monitor mixes or can they all be the same for each player?
    If you can get away with the same mix for each player, create a stereo aux track with a bus of your choice on the input and use outputs 3&4 from your interface to connect to the stereo input on your headphone pre amp.
    I'm not sure why you are connecting your interface to the pre amp via an aux input? I would have thought that it should be hooked up straight into the stereo input.
    Although you won't get individual monitor mixes this way, each player will have some freedom over what they are hearing via the controls on the headphone amp.

  • Recording, Mixing, Mastering forum?

    I am looking for recommendations for a forum that is friendly and helpful like this one where I can learn more about recording, mixing, and mastering techniques (among other topics). Whaddaya know 'bout?

    Brain,
    This forum is centered around Garritan products, however, the people are like those on this one. Very helpful and willing to give advice or direction.
    http://www.northernsounds.com/forum/forumdisplay.php?f=39

  • EP recorded/mixed entirely in GarageBand

    I recently finished a six-song album that was recorded and mixed entirely on GarageBand (version 2).  All songs include layered vocals, multiple guitars, bass, and modified GB drum tracks.  I started from scratch with no previous recording/mixing experience.  It took seven months of off and on work with a few totally dedicated weeks.  The songs were then professionally mastered.    
    Listen to The Garage Band Files here: http://SamPageMusic.com

    i have this and by changing the settings in "midi" to 48000Hz, it fixed it for me. Don't know why but it did.
    Now i have another problem. it has just altogether quit detecting it. Really weird. the tube mp is getting the signal from the mic, but garageband is not detecting it. Perhaps i'll start another disucussion to see if anyone knows what migth be going on here... again, i've used it numerous times.. .this was just out of the blue.. no detection.

  • Is there a voice recording app for ipad that shares directly via iMessage (not just email) - like voice memos does on iphone?

    Does any-one perhaps know whether there's a voice recording app for ipad that shares directly via iMessage (not just email) - like voice memo does on iphone?

    You can't do anything in the background of iOS. Apps are still one at a time (with a few exceptions like Music), and suspend when the app is closed. It's also against the App Store guidelines to sell apps that would allow such actions.
    Though, maybe you could get your Voice Memos saved to MP3's, which can play in the background of other apps.

  • Server 2012 R2 - The system failed to register host (A or AAAA) resource records (RRs) for network adapter

    We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
    When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
    The system failed to register host (A or AAAA) resource records (RRs) for network adapter
    with settings:
               Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
               Host Name : SRV-DATA
               Primary Domain Suffix : internal.local
               DNS server list :
    192.168.0.50, 192.168.0.42
               Sent update to server : <?>
               IP Address(es) :
                 192.168.0.99
    The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
    for this name does not support the DNS dynamic update protocol.
    To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
    On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
    the update fails within a few seconds. 
    Source: DNS Clients Events
    Event ID: 8018
    User: NETWORK SERVICE
    This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
    to me so reaching out now to see if anyone has any ideas?
    Environment:
    - Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
    - Windows Server 2012 R2 Client machines (Physical and Virtual)
    - Windows Server 2008 R2 Client machines (Physical and Virtual)

    The zone is configured as "Secure Only"
    The PDC is the SOA for the zone
    I dont have a packet capture from the DC, only the client. 
    The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
    NotifyServers                     : 
    SecondaryServers                  : {10.2.0.3, 10.2.0.5}
    AllowedDcForNsRecordsAutoCreation : 
    DistinguishedName                 : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
    IsAutoCreated                     : False
    IsDsIntegrated                    : True
    IsPaused                          : False
    IsReadOnly                        : False
    IsReverseLookupZone               : False
    IsShutdown                        : False
    ZoneName                          : internal.local
    ZoneType                          : Primary
    DirectoryPartitionName            : ForestDnsZones.internal.local
    DynamicUpdate                     : Secure
    IsPluginEnabled                   : False
    IsSigned                          : False
    IsWinsEnabled                     : False
    Notify                            : NoNotify
    ReplicationScope                  : Forest
    SecureSecondaries                 : TransferToSecureServers
    ZoneFile                          : 
    PSComputerName                    : 
    CimClass                          : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
    CimInstanceProperties             : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
    CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties

  • Imac as external monitor for windows Notebook

    Hi,
    I want to switch from my Windows Pc to a mac for private use.
    I prefer the new iMac (2011) 21,5" but I could not get an definite answer (not even in my local apple store) if it is possible to connect an existing Notebook (with VGA Mini-d-sub or DVI connector) to the new iMac in order to use the iMac as an external monitor for the Notebook.
    I definitely need this for my business work in my home-office so this information is vital.
    If ist is not possible I have to take the macMini and stay with my standard monitor.
    Can please someone tell me if it is possible at all and if so, how it can be done.
    I searched the internet and only found out that it was possible with the older 27" model but no information for the 2011 21,5" so please help!
    Thank you in advance for your Support.
    Celindir

    Hi,
    Sorry to say, but ...
    The 2011 iMacs (21.5" and 27") can only be used as a second display via a Thunderbolt-to-Thunderbolt cable.
    The 2009 and 2010 27" iMacs can be used as a second display via a DisplayPort connection.
    http://support.apple.com/kb/TS3775 andhttp://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Stefan

  • How do I set a particular view in STUDIO record browser for a particular user?

    How do I set a particular view in the Studio record browser for a particular user?

    Thank you for your reply. However, I could not get Templates to work correctly for me.  Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

  • Can't find drivers for my notebook

    Hi,
    I am in need of drivers for my notebook, and the site where I would usually get them from (http://h10025.www1.hp.com/ewfrf/wc/product?cc=au&dlc=en&lc=en&product=7169846) is not working at all. Is there some other page where I can download drivers? The notebook is the HP Pavilion 15-p025AX and the P/N is J3Z02PA#ABG.
    Any help would be greatly appreciated.
    Jacob
    This question was solved.
    View Solution.

    Hi,
    It is there:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=7169...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Payment F110 - No data records found for these selection criteria, FZ208

    Hi all,
    I have done all configuration for payment medium for a customer in Norway. We use Telapay and program RFFONO_T. We have not activated the new general ledger but we have ECC 6.0 so I do not see why it should not work.
    The invoices got paid with payment order but when I should download the file in Environment > Payment medium > DME Administration I got the following error message:
    "No data records found for these selection criteria
    Message no. FZ208
    Diagnosis
    No data could be accessed for this selection.
    Possible causes are:
    No data exists for the activated selection.
    You have no authorization to display or edit data from this selection.
    Procedure
    First check whether your selection criteria are correct.  You may need to expand the criteria to include a larger search area to check whether data exists in the system.
    Make sure you have the proper authorizations for displaying and editing data.  Read the Release note for DME management for further information on the authorization objects.
    Proceed"
    I have tried with different variants but that doesn´t matter. When I look at the payment run log I can see following:
    "Additional parameter specifications 1400 SAPO02 are missing
    Message no. FR193
    Diagnosis
    Entry 1400 $V2& is missing from the additional company code parameter table.
    System Response
    Processing was terminated.
    Procedure
    Maintain the entry according to the instructions in the program documentation."
    I suppose that´s why I can´t get a file. Do any one of you know why I can´t get the file created. Please help.
    Best regards Lisa

    Hi Lisa,
    I have a similar problem with program RFFONO_T and Telepay format for a Norwegian customer. Payment medium is not created. In the payment run log is the following message: "Additional parameter specifications XXXX SAPO02 are missing
    Message no. FR193.Entry XXXX $V2& is missing from the additional company code parameter table."
    According the program documentation for RFFONO_T, a company number (11 digits) has to be maintained under company code global data, additional details. The legal org.number with 9 digits is already entered but I do not understand where to enter a 11 digits company number? A user number (10 digits) is also entered in trans OB94  but the problem remains.
    Did you find a solution to your problem?
    Regards,
    Agneta

  • Which table include duration&data records number for each nodes in PC?

    Hi Experts,
    Now I am on Process Chains maintenance work, I need daily record a very huge infopackage process chain's each nodes more then 50 infopackage, record something like duration ,data records nubmer for each infopackage. I need check this one by one in process chain, and my question is do you know this infomation record in which table in BW system? if i know it I will write a program to get it in one time.
    Thanks in advance!

    Hi,
    You can find the information about the process[as you said nodes]  in his tables ,
    RSPCPROCESSLOG - Stores complete information about the finished process
    RSPCPROCESSINSTANCE - Stores the meta data for the successor process..it also has the runtime
    RSPCVARIANT and RSPCVARIANTATTR - the succesor process reacts to the event
    Process chain related tables are start with RSPC*.
    under Settings ® Maintain Process Types (table RSPROCESSTYPES).
    Pls chk this link;
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    Other tables used for Process chains:
    http://wiki.sdn.sap.com/wiki/display/BI/ProcessChainTables
    Thanks
    Hemav
    Edited by: hemav on Aug 4, 2010 7:38 AM

  • Info records flagged for deletion don't update purchase orders

    Hi, I would like to know how I can customize SAP-MM in order to avoid that the info records flagged for deletion update the purchase orders.
    When I create a PO from a Purchase requisition (which have data with texts like "Vendor material number"), the Info record flagged for deletion update this data.
    Thank you

    Hello
    I think inforecords flagged for deletion is not being considered for PO updation. Could you please check again.
    It might be posible that 'Vendor material number' is spcified in Purchase requisition and when you create PO from Purchase requisition, it is copied from there to PO.
    I hope it will resolve your issue.
    Best regards
    Avinash

Maybe you are looking for