Recording mono, want to copy left side to right side for stereo

I've got a desktop studio and I can record only in mono, when I record in stereo it only records on the left track. is there a setting in soundtrack that I can change so the left track is coppied to the right track at recording???

Record in mono, not stereo. No need to copy from L to R channel in a stereo file. Mono will play in both channels...and you can pan it as you wish.
If you do record in stereo, simply double-click the track and convert it to mono (select L channel for conversion).
C

Similar Messages

I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

You can drag and drop (this will result in a compressed JPG) or hold the alt key and drag and drop (this will copy the original). You can also select the pictures and choose Export from the File menu.

Convert stereo to mono, but with only left side

I have some mp3 files that are stereo, but I only want to hear the left. I know I can change the balance through System Preferences, but I want the left side to be coming through both speakers. Also I assume I could do this with Garageband, but there are a lot of files, and I'd rather not do that for all of them.
Thanks!

You don't want to hear the right channel at all or you want to combine both channels and listen to it with your left ear only?
You can convert the files to mono using iTunes.
iTunes prefs -> Advanced - Importing.
Click the drop down next to Setting and set it to Mono.
Now select the files you want to convert, then menu Advanced -> *Convert selection to...*
This will make a new copy of the selected files in Mono.
The original files will remain unchanged in iTunes.

Issue with vocals during recording - only hear them on left side of headphones.

wanting to hear in stereo...

If you've recorded your vocals the way most people do, then they will be mono anyway! If you want to hear a single mono track in both channels (assuming that your headphones are working normally in the first place), then you either have to pan the mono track so that it feeds into both sides of the master channel, or you have to duplicate the vocal so that it occupies both sides of a stereo track. The former is the preferred way of doing it - have a mono vocal track in your stereo mix and pan it to where you want it in the stereo field.
As far as monitoring during recording is concerned, then there could potentially be a few other issues - it rather depends how you are feeding the channel out of your sound device. It's not quite so easy if it's a mono track to feed both sides of a pair of headphones when you haven't gone via the master mixer - IOW you are using a direct output from the track. That would only feed one channel by default. But if you are going via the mixer (which you normally would whilst laying tracks) then it should just be a matter of panning the vocal channel into the centre.

How move vertical scrollbar to left side (for lefties on tablets)

till now in all previous ff i could easily move vertical scrollbar from right side to left. but i cant find the instruction now

Set the pref layout.scrollbar.side to '3' to place the scroll bar at the left side.
See http://kb.mozillazine.org/layout.scrollbar.side (default is 0: user interface)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Want to copy actual data to plan version for profit & cost center

Hi,
I want to copy data from actual to plan data for first half of the financial year.
I was trying with T-Code CP98 . Are any Configration settings required to be done?
But facing error "you have not selected a traget project"
Is there any other way out for doing these activity?
Thanks & Regards,
Mayur
Edited by: Mayur on Feb 23, 2010 11:56 AM

Hello Mayur,
Please try with KP97/KP98 transactions.
I suspect, that you are giving wrong target plan version.
Please check your entries once again.
Regards,
Praisty
Edited by: Praisty on Feb 23, 2010 12:04 PM

Copy left channel to right.

Hello.
I have an audio track originating from Première Pro which has only one channel of sound.
How can I copy the left sound channel to the right one to have both channels the same?
Thanks in advance

I think this is pretty much the answer. The key in soundbooth was to copy 'channels' into a new multichannel file, not 'copy waveform'
http://forums.adobe.com/message/2942057#2942057
Thanks

How to display sign in left side in ALV Grid Function module?

Hi,
How to Dispaly sign in left side for amount fields in ALV GRID function module?
Ex : Amount = 1234-
I want to dispaly it as -1234.
Is there any option in ALV Grid function module?

Hi sreedhar,
Use FM 'CLOI_PUT_SIGN_INFRONT'
it will giv the value like '-1234' if u pass '1234-'.
DATA : v_field(17).
MOVE v_amount to v_field.
CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
CHANGING
VALUE = v_field.
MOVE v_field to v_amount.
OR
FORM change_sign changing var type c.
if var LT 0.
shift var right deleting trailing '-'.
shift var left deleting leading ' '.
concatenate '-' var into var.
else.
shift var left deleting leading ' '.
endif.
ENDFORM.
reward pts if it helps.
Edited by: venkat reddy on Jan 2, 2008 7:19 AM

Adjusting Left And Right Balance for INPUT - SB Audigy 2

Hi Guys,
I'm using an SB Audigy 2 ZS with the latest drivers. I realize that it is possible to adjust the left/right balance for speaker OUTPUT, but Is it possible to adjust the left/right balance for the inputs? I'm doing some recording and I want to set different input levels for the left and right side of the CD Digital In as well as the Aux Line In. So either either a way to control left/right input balance or seperate input levels for left/right would be helpful.

Thanks in advance,
Steve

Thanks but I need real time. If I use a mic for the right input and a seperate mic for the left input I want to be able to set the optimum recording level for each side/mic. If I just set the level for the louder of the 2 mics then the other mic level on the other side is set too low You would think that Creative could have included this as a software control.
Also, if I record using the "Digital Input' and the 'Aux Line In" at the same time then you must select "Record What You Hear" from the Creative Control Panel. Both sources are mixed togther, if I could set the CD Digatl output to left side only then I could record CD Digital on the left side and Line Input on the right.
I just wish the Audigy could do this as it would be a cheap software control, I don't won't to buy another soundcard.

Garageband 11 Recording on left side only?

Hey Guys, I have a question and need your help in answering it. I have created numerous songs in Garageband 2011 using various loops but now its time to add real guitars, bass guitar and synths. I am using a Lexicon Alpha as my interface. When I go to a song and add a new track to record say my guitar onto, it records my guitar but it only records on the left side of the track and only plays back on the left side. I was told I need to change the track to record in mono: is this true and can you give me details on how to change it to mono? I want the guitar and anything else I record to record and play back on the left and right. Thanks in advance for your help!!!!
Madmax41

Thanks isteveus!!! I will try this and let you know how I turn out. I think this will solve my little problem - it certainly makes alot of sense now that I have gone back and looked at my settings. Thanks again!!!

"-" sign displays in right side in screen - we want in left side.

Experts.
When we are running on SAP Screen in earlier system any where if you see negative value,
the sign will be shown in " Left Side" of the number like ( Example : - 3451.00 )
We are on ECC 6.0
when we see similar case in ECC 6.0 system it shows as 3451.00 -
Requirement :
in ECC 6.0 also we want to see "-" sign on left side on SAP Screens.
Regards

Hi Dudes,
I want to post the WHT tax transactions directly at the time payment in Cash journal(FBCJ) transactions.
Ex: Payment of Stationery expenses
Stationery Exp Dr 100
Cash a/c 90
WHT Tax 10
I don't want to route this transaction through a Vendor and I want to post it directly and at the time of posting system has to display the above accounting entry.
what settings required to get the above result?
Thanks
MBN

Can we enable "Select record Set Message choice" of Table in left side

Hi ,
I have requirement to set the "Select Record Set " Message choice of a table region on left side.
Ex:If there are more records in a table region and message choice available to select next set of records.
You can chk in Workflow Status Monitor function.
Its the Navigation Bar to be @ left side on the table Region whcih allows you to navigate the records set.
Thanks,Sarath.
Edited by: SarathL on Dec 13, 2011 4:59 PM

Hi,
Not sure what exactly you are looking for.
The Next link and option to select next set of rows comes to your OA Table by default .. isn't it?
-Idris

Firefox 4.0 i want my bookmarks on left side of page-how do i do that

just got a new computer and put on mozilla 4.0 i made a few bookmarks but want it to appear on left side of screen whenever i open a tab. how do i do this

Press CTRL+I
- or -
Right click a blank part of the tab bar and go to "Customize". A panel will open and in there, you'll find a button with a star on it slightly right of centre. Drag that to the toolbar and then close the panel. You can subsequently open bookmarks in the left panel with that afterwards. See screenshot.

Want to desable left hand side pannel in CRM_DNO_Monitor

Hi,
I want to desable left hand side pannel which consists worklist find and calender tabs...for the all the usersso tht they should not view all the other tickets in the service desk.
Regards
S.Manu

Hi Manu,
Once you get the screen "Display support message" for the first time, you go to Extras>Locator>Show/Hide Locator (F9)
then from next time onwards you will not get the leftside panel.
Hope this solves your query.
More over when you use workcenter you will not get this panel. Hence give only workcenter access to keyusers with only message create role.
Regards,
Shyam

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

Hi
That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
Remove all your tabs and set the text in justified paragraphs.
I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
The text will jump into place the way you want it to.
Hope that helps
Paul
PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
after you've set it will be LOADS easier this way.
You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

Recording mono, want to copy left side to right side for stereo

Similar Messages

Maybe you are looking for