Recording Multiple Audio Tracks - delay problems in 7.2 Pls HELP

Hi, I'm finding very buggy behavior - if I record across several audio tracks (say 5 mono channels) for longer then 10-15 sec. Logic HANGS for a long time when I'm done with a take - 15-25 secs of the spinning ball icon, and then will redraw and start the dialog box that says it's computing the overview. I'm currently on 7.2.2 but I also tried going back to 7.2.1 and it's still doing this. I have the "faster overview calculation" box un-checked, but it didn't seem to make any difference either way. I also tried this on a new file, same problem -
I also already tried recording to different drives, and selecting and unselecting the 'record limit' dialog in the record destination dialog - I usually have this set to a max recording time of about 7 minutes. None of these changes affected the sluggish behavior.
Anybody else know of this and know of a fix/workaround? I have a session to record tonight with multiple players and this session is going to go like molasses unless I figure this out!
thanx

Hmm, I've never had anything like this. I'm wondering whether it indicates an underlying disk problem?
Try running repair permissions and a disk diagnostic tool if you have it. Are you using an internal or external drive? Try recording to a different drive if you can and see whether the problem persists.
You could also try creating a different user and running Logic under that account, to see if it still shows the same behaviour (if not, then it could be a user permissions issue or something funky with your user account).

Similar Messages

Multiple audio track editing problem

Hello, Im editing a film right now and we have a tons of temp music score tracks along with the standard vocal track from the camera. I am running into major problems, because when I go to trim a clip a little, it says operation not allowed because a piece of audio temp music is below it. I have to lock the the audio (say its 7&8) to make the trim, but then all the music on that track doesnt get shifted down. How the **** I am supposed to edit with multiple tracks. Is it just not possible? Please say no.

Sequence settings, Source material specs, number of audio tracks, please.

Movies - Multiple audio tracks strange problem

This is a strange problem.
I have a .mov with 2 audio tracks. One italian (the first and active) and one english. The movie is compatible with ATV.
Using QuickTime Pro I can choose the language while watching the movie.
Using iTunes I see the movie with the first language selected on preferences (cmd+j on QuicTime Pro).
On ATV the same movie plays just English, the second language, and this is quite strange.
Does anyone have the same problem?
Greetings
Mac OS X (10.4.9)

Hmm, I don't really know. I have converted the DVD with 128 kbps for the two audio traks (stereo).Sounds like I need to go back and run additional tests. For my first attempt, I used two stereo tracks -- each 128 Kbps @ 44.1 KHz. For latest test used two mono tracks with the first 64 Kbps @ 44.1 KHz (keyed to English) and the second 32 Kbps @ 32 KHz (keyed to Italian).
I create a m4v video, I open with QuickTime Pro and work on the preferences for audio traks, than I save with mov extension.Had assumed we were both using similar strategies to create alternate audio movies here. Basically I create the movie with two audio tracks and then open the "Properties" window, select the first audio track (which is already set for English), set the alternate audio track pop-up for Audio Track 2, select the second audio track, set the language pop-up to Italian for this one, and use the Save As... menu option to create a Fast Sart, Standalone movie in the MOV container.
In this way I have a perfect double-language movie that, as I told, works perfectly on QuickTime and iTunes.Did have one question though. When you say you have a "perfect double-language movie that ... works perfect on QuickTime and iTunes," are you saying you can change the language in iTunes while the movie is playing? While I have no problem changing language using the "Choose language" menu command in the QT player, I have yet to be able to find a way to do this while playing in iTunes.
UPDATE: to temporally solve the problem I have changed the infos on movie properties. Calling the English audio track "Holland" (or any other language that is listed after Italian) I have solved the problem. On Tv, iTunes and Quicktime I can hear the "default" language (italian) and, just changing again the properties, I cand hear the second language.I think we are doing the same thing only I did not bother/have to use and additial language setting to get this to work.
In this case Audio Track 2 (Italian) is the default.
In this case Audio Track 1 (English) is the default.
Thus, for my test, I created two separate movies with each defaulted differently and played them back in each program/device to see which audio track played. In each case it was the "checked" default audio track and changing the "Language" setting for TV to Italian had no effect.

RECORDING MULTIPLE AUDIO TRACKS AT ONCE

Hello. Looking for some help. I am using LOGIC PRO and a Presonus Project Studio 8 input AD converter. I have 6 drum mics up and Presonus is recognizing them. I have created 6 audio tracks in Logic and named them appropriately. I go to record them and all I get is the kick drum...no other mics are recording on their own tracks....
Can someone help guide me?

Three ways of doing this:
In your mixer slide over the tracks with your mouse - they all turn white/grey - hit record on one of the tracks - all tracks will get armed with the red flashing R button.
or
Hold the shift key and select the tracks in your Arrange - arm one of them - all tracks go into record mode.
or
group the tracks together in a group via the grouping slot above the channel fader, in the group options menue select record enable - arm one of the tracks - all tracks go into record mode.

Watching multiple audio track movies on Apple TV. PLEASE HELP...

Hi, I hope somebody can help since I haven't been able to find any answer to this.
When I rip a movie (with Handbrake) from one of my DVDs to place it into my iTunes library, I have the possibility to chose to extract different Audio Language Tracks. In fact, once the rip is done, I have a movie in iTunes that has two tracks (2 languages) in my case English and Spanish.
Now, when I sync it to AppleTV, I always can only watch the movie in english. I don't want to lose the english track, but I do want to watch the movie in Spanish on my ATV.
Is there a way to chose the Audio for multiple track movies on ATV? (ITunes does let you chose).
Thanks for the help.
Rheex

Because it wasn't devised with you ripping DVDs in mind, and certainly since Take 2.0 update the focus is on rentals.
It would be logical to offer multiple soundtracks/subtitles etc, but they would add to download size which will be an issue for some people - seems more likely they would offer soundtrack options other than Englisg outside US - ie choose English or another language to rent but not both.
AC

Problem recording 5 audio tracks in one go

HI
I have audio tracks 1 - 5 on logic assigned to tracks 1 - 5 on my mackie mixer. Though when i go to click all the record buttons so i can record 5 audio tracks (live drums) in one go it wont let me. For example The record button only lights up red on one track, ie audio track one. When i click the audio track 2 record button that lights up the track one red light goes out.
Has any one got any advice, i cant record all my tracks in one go,
Thanks

Your inputs need to be 1 - 5... on your channel strip,right under the i/o there is a little gray box that displays,the input, if all the channels have the same inputs,then only one track will rec enable at a time.select your inputs according track 1 should be input 1 track two should be input 2 ect. Page 275 in the manual

How to play multiple audio tracks simultaneously?

Hi there,
I am having problem with playing multiple audio tracks. I want to play 2 or more audio tracks at exact time (without delay) - is it possible? how can it be done?

So, essentially, you're trying to take a recording of say, a singer and a guitar player, and end up with the singer in one file and the guitar in the other. Got it.
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Merge.html]
That sample will merge multiple input files into a single file. Because you want to play the files together rather than save them, just take the sample and strip out all of the DataSink stuff, and add the following line right after the Processor "outputProcessor" is realized...
outputProcessor.setContentDescriptor(null);
So, it'll make the following revision to the code:
     // Create the output processor
     ProcessorModel outputPM = new MyPMOut(merger);
     try {
         outputProcessor = Manager.createRealizedProcessor(outputPM);
                    outputProcessor.setContentDescriptor(null);
         outputDataSource = outputProcessor.getDataOutput();
     } catch (Exception exc) {
         System.err.println("Failed to create output processor: " + exc);
         System.exit(-1);
     }That'll make the outputProcessor play the file, as if it was a Player object. You won't have any visual controls, but if you need visual controls, then don't do that, and just create a Player object to play the outputDataSource.

Question about multiple audio tracks

Hello,
I see that imovie has only 2 audio tracks available when creating a movie. I need more than two since I will be working with a voiceover track, a soundtrack and at least one background/environment track all at one time. I won't be able to use the sound recorded with the video so that "track" is not an option.
My question is; Am I out of luck here and need to spend the 1K for studio pro to add more multiple audio tracks?
Also, I tried working with garageband but since all of my audio tracks import in at a minimum of 40 beats per minute, the voiceovers are all sped up and sound chipmunky.
Thanks for any help!

Well I didn't mean to irritate you...LOL And yes, I realize that this is the iM 6 forum but the gist of my question was related to multiple audio tracks in iM and thought I would ask about it in the forum pertaining to the latest release.
I had already posted a question in the GB forum regarding the bpm problem and found no answers so I was pretty much about to shelve that idea and forgo the whole garageband thing; this without knowing about the new "swap" features. I just updated to iM 6 yesterday.
As far as the "on-tape" raw audios: I was working on my movie in iM4. I wanted to add more audio bits but I don't have a proper mic for my G5 so I recorded the audio bits on dv8 tape through my camcorder. I imported the video (the image was the inside of my lens cap!), extracted the audio, took those audio files and imported them into GarageBand. That's when I noticed the bpm problem.
I'm sorry about the lack of info I originally gave but like I said, I had pretty much gave up on the idea of using GarageBand. I'm pretty new at this and I'm trying to decide what I need in terms of software to get what I want out of my movie. I'd be willing to pay for FCxp but still looking into whether I need to do just that or whether I can get by by using imovie and now it looks like GarageBand too.
ah, thanks for that
what irritates me, Prince wrote:
The audio tracks were voiceovers that came from my
dv8tape, imported into imovie4.
... ehm, but this is the iM 6(six) section, as said,
iM 6 allows now "swapping" files with GB3... (I'm way
back in the 90ies.... see my specs... )
so, video is in some iM, and he wants to use the
actual "on-tape" raw audios...
I thnik we need a little more detail...

Movie Playing multiple audio tracks & echoing

I have a movie that is in a symbol that i want to play after a set amount of time by using setInterval. The function works - but when it shows the symbol and plays - it plays multiple audio tracks at the same time - sounding like an echo and or a 1-2 second delay on the same audio track. It also seems the audio starts playing on the main root without actually triggering the playhead of the video symbol.
Following is the code i am using for both timer and the video. Any pointers?
// interval
         var timer = setInterval(onTimer,10000);
         var mysymbol = sym.getSymbol("btn1_video");
         // function
         function onTimer() {
            // clear last interval
            clearInterval(timer);
            // action
            sym.$("btn1_video").show();
//and on on the movie symbol timeline trigger:
var vid = $("<video width='818' height='460' autoplay='autoplay' preload='auto' controls='controls' id='videoID'>" +
"<source src='video/testvideo.m4v' type='video/mp4' />" +
    "<source src='video/testvideo.webm' type='video/webm' />" +
   "<source src='video/testvideo.ogg' type='video/ogg' />" +
   "This browser is not compatible with HTML 5" +
"</video>");
sym.$("btn1_video").append(vid);

You identified the problem. I thought that you had to highlight the first song to get the playlist going, but all that does is make the first song repeat itself. Thanks for the guidance.

How do I import multiple audio tracks?

Hi there...
I have a number of video files that have multiple audio tracks in them. The problem is I can not work out how to get prem to see multiple audio tracks. The files import fine and I have also tried various other formates with multi-track audio.. but only audio "stream 1" is visible in prem.
What I was hoping is that the video would come in with a 2 audio tracks instead of 1 each in its own "lane".. so I can then use the mixer and the audio files are linked to the video file and in perfect sync.. (just like when you import with 1 track)
NOTE: I am not talking about channels.. but complete 2 completely different audio tracks.. and I know that I could extract these audio streams into wavs and then re-sync them but this seams overkill and a duplication of effort... surly there is a way to have prem support more than 1 audio track on a video file?
--Me

Well, if PP doesn't bring them in, then best guess is they just don't exist.
There's really no trick or user adjustment for this that I'm aware of. You import the file, PP sees what's in it. I've never observed or read about any other behavior than that.

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

Audio-tracks delayed

With my *Digi 003 rack* and *Logic Studio Pro 8.0.2* I suddenly have recorded audio-tracks delayed when played back. If I play a guitar right on click and play it back, it is totally out of timing. Never had that one before. When I use the *Apogee Duet Soundcard*, all is working fine. Has anyone any idea what that may be?
Cheers!
Michael

Hi Anthro,
I just repeat this test for you rigth now..
it is very fresh test... in order to have a perfect sync when recording an external instrument with "Software Monitoring" turn to "OFF" (for be able to repeat this test on Logic that usually is used with SW turned to "ON" you must restart Logic or Core Audio before starting the test)
I repeat this test refering to specific Logic setting : *Software Monitoring turn to "OFF"*
(when SW is turn to ON, every external incoming Audio input is recorded in perfect sync with the SMPTE and BPM time)
I have use an External Midi Drum machine as sound source!
see the following pictures:
this is the MIDI object quantize at 1/4:
this is the Audio recording of the MIDI object and the relative coreaudio setting preferences
*software monitoring off*
this is the Audio recording of the same Midi object with a correct Recording Delay Compensation setting.
*software monitoring off*
If you have doubt about this test, feel free to replay me... I hope this should be help you to find a good sync....
in any case... this is not the same for all Audio devices, they can have different driver-hardware adding or less DELAY...there are faster device like Motu 828mk3 and there are not so fast device like as Digidesign core audio drivers that have proprietary security and rigths protection)
however, FOR A PERFECT Sync... i suggest to extend the resolution of the Samples Editor...
bacause some device can be set as 1124 instead 1024 (or different value)
(on My MOtu I get a near to perfect sync around 1009 /1012 Delay
(I hope this post can be helpful also for the people that they +*"cannot believe that"*+ )
Good Luck
fermusic

Premiere pro: multiple audio tracks in a single take. (Workflow for audio mixing outside premiere)

Hi I am an editor from Finland.
I need to sync multiple audio tracks (like 2 stereo and 4 mono) to different takes before i start to edit. You see, after the editing I will create an OMF file for the sound editor who needs all the audio tracks to work with. I have noticed however by just nesting (puttin video and audio clips in a single sequence) the resulting sequence placed on in the main sequence is flattened into stereo (not multichannel). You see my problem here? I am surprised, because i have always taught that this is a very normal workflow and so far i haven't found a single tutorial or a guide for this problem.
Just to make sure we're on the same page: I know how to sync video and audio, just not so that the 6different audio tracks in all my 120 different takes that i edit into a single sequence will have the 6different audio tracks in the audio post production (which is done in protools, maybe...)
Oh yeah, Premiere Pro CS5

Hi!
This is the case when i get a master clip with all the audio tracks in it. I however got separate files, a bunch of different video files (with stereo track), for every take a boom mic audio track, and a few tracks for all the microphones on the actors. Now after i import these into premiere, how will i proceed so that after i have synced all the audioclips to all the video clips (by nesting?) I will still have all the audio clips intact in the OMF file I will create.
Last time i created omf, all the clips had turned into stereo because of nesting. Is the only way to avoid this by joining the video and audio clips into multichannel audio clips with another program before importing into premiere?
I am not very good at explaining... Problem: I get a video and 10 audio tracks. I join them by putting them into a sequence. I repeat this about a hundred times (for every take). Now i start to edit. I create the main sequence in which i clip pieces from all the hundred takes. In the main sequence the clips have only one stereo track. When the movie is finished I create an OMF for the sound guy. The sound guy asks me why are there only 2 tracks per clip? Where are all the 10 separate audio tracks?

Working with multiple audio tracks

Hello,
I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
BTW I'm working in FCP 7.
Thanks,
Thien

One way:
Lock the video track.
Use the Edit Selection Tool to Select the audio transition points
This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
which gives me the displacement of all the tracks that I wanted:
You can use this quite quickly once you get used to it.
MtD

Video with Multiple Audio Tracks-- IOS 4.2 Removes Way to Select Them

After upgrading to IOS 4.2 on my iPhone 4, I've found it no longer lets me select from among multiple audio tracks. The option and button is completely gone.
I encode my videos with AC3 audio as the first track (for my home media devices), and stereo audio as the second track (for the iPhone). Now the iPhone will just play the video, with no audio, and no way to select another track. This is extremely frustrating as I've encoded all my DVDs this way, and never had any issue with playback like this on any IOS device going back to the first gen iPod Touch.
Anyone else have this issue, and know of a work around? Thanks!

I too have the exact same problem for the exact same reason. Did you ever figure out a workaround (other than reencoding all your videos)?

Recording Multiple Audio Tracks - delay problems in 7.2 Pls HELP

Similar Messages

Maybe you are looking for