Recording narrations in keynote does not erase old narration

When I use keynote to record a presentation for distribution as a video, any changes DO NOT wipe out the old narration but double up. I have looked everywhere for this, and it is supposed to automatically get rid of the old recordings and use the new recording moving forward.
I think the software is not programmed correctly as it didn't work in old OS and it is not working in Mavericks.
Any help or similar frustration?
Thanks,
Sean

If you have had similar problems, Apple would like to hear about it at:
http://www.apple.com/feedback/keynote.html
It's the only way they will make improvements.

Similar Messages

Time Machine does not erase old backups

Hi,
I have a problem using Time Machine on my MacBook Air. I use a LaCie 500GB Rugged All-Terrain Hard Drive for backup. The external drive has 3 partitions, one of which is dedicated to time machine and measures 128 Gb. It happens very often that I receive an error message saying that Time Machine cannot complete backup as there is not enough space and that I should manually remove old backups. Time Machine is supposed to do that automatically. The backup partition is of the same size as the internal flash drive which is not even full so I don't see why there should be a problem.
I also have a MacMini with an external Iomega drive and same setup (3 partitions on the external drive and the Time Machine dedicated one of the same size as the internal drive) and I never had an issue with the Time Machine not erasing old backups to make room for the new ones.
How can I fix the problem on the MacBook Air?
Many thanks in advance,
Igor

How much space is currently in use on the volume TM is backing up from? If it needs to do a large backup for some reason, there may not be space to do so without deleting so much that you are left with less than a full backup. TM needs the backup drive to be a minimum of 2-3 times larger than what is being backed up.

Keynote does not support exporting with embedded Quicktime Movies

I hope this helps a few of you out before you run into this problem.
Keynote does not support export to Quicktime with any slides that contain a quicktime movie.
Created a 27 page slide show with transitions, music, narrations and 6 Quicktime movies (Actually LiveType Text scrolls)
When I attempted to export it never finishes the export cutting it short after about 20 pages.
And the pages with the movies, don't start playing.
It exports fine as a quicktime movie without the movies inserted though.
Spoke with Apple Support and they confirmed that quicktime placed files within Keynote playback is only supported from the native Keynote Application.
I read somewhere on this board that it was an issue with Quicktime version 7.5, not so as I tried the same test on a mac with Quicktime 7.42 and it had the same issue.
So, beware.
LJS

Maybe I didn't understand well what you said but it is possible to export a Keynote file with embedded Quicktime movies to a quicktime movie. Actually, I'm doing it and I works. BUT, the issue I get is that I can't get my embedded videos to loop. Grrr...

Message no. M7077: Valuation record MMMM PPPP 02 does not exist

Hello experts ,
I am getting the erroer Valuation record MMMM PPPP 02 does not exist : Message no. M7077. while doing MIGO - GR .
Pls tell me what could be wrong in Materiual master ??
Regards
Anis

Hi
It seems that you are mainataining a valuation type in the GR, where as the material is not maintained with that valuation type.
In the GR Press F4 on the field "Batch" to obtain a list of the valuation records for the material.
If you would like to maintain the valuation type for the material , Please maintain the same using MM01 transaction by just extending the Accounting view with that valuation type.
Thanks & Regards
Kishore

Record 799 :InfoObject YEKEYBRND does not fulfill ref. integrity in record

Hi every body
I Triggered a load and the load failed giving the error 'Record 799 :InfoObject YEKEYBRND does not fulfill ref. integrity in record 799 in value 0599 '.
Can anybody explain me clearly the meaning of the error.
Thanks&Regards
Raghavendra Reddy Bijevemula

Hi,
Check whether the value has maintained in the SID table for the info object YEKEYBRND thru BIC/SYEKETBRAND..
if it exixts the u have to repair ur infoobject in the RSRV.
Check the link..
http://help.sap.com/saphelp_bw31/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
Re: Referential Integrity check
Regards-
MM
Assign points if it helps
Message was edited by: vishnuC
Message was edited by: vishnuC
Message was edited by: vishnuC

When i try to record a video it does not work

When i try recording something the video does not start recording and it does not save

This started for me today, too. I have turned my phone on and off, but I don't want to lose all my info by resetting my phone.
What do I do to backup all my pics, phone numbers, texts, etc before I restore my phone? then once the restore is finished, how do I get this stuff back on my phone?
thanks,
hemi.powered4x4

Valuation record 600025 UP01 LOCAL does not exist

Dear Friends,
I have configured split valuation for materials.
1. i activated split valuation in OMW0
2. I created the following in OMWC
    2.1 global types IMPORT for 0003 spareparts
    2.2 global types LOCAL for 0003 spareparts
    2.3 global category P Batch
          for this category, above 2 types activated.
          for this category, above 2 types are assigned to my Org. Unit plant UP01.
now i created a material 600025 and in accounting1 view, i have taken the following
       valuation category - P
       price control - V
       moving price - 1,00
next i created a PO in ME21N for vendor 400015.
while MIGO against this PO,
after clicking Check the below error is coming.
Valuation record 600025 UP01 LOCAL does not exist
Message no. M7077
how to fix this. please help me.
Thanks in advance
Ravi.

Hi,
create val types for your material in MM01,.
Goto MM01 and select accounting view and give your org level plant and in the pop up window enter P val type and in acc view give details for your different val types.
Regards,
Deepak.
Edited by: deepak k b on Dec 11, 2008 8:17 AM

Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record

Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record. When I Delete any Record in Source Table, I expect the same record should be 'Expired' with 'End_Date' with Active = 'N'.
BTW: In 'Table Comp', I have Checked the 'Detect Deleted rows(s) ...'. / ' ... largest generated key' is selected by default..
This is not happening..! My Update and Insert works fine..!

Hi
Do you have detect deletes set on Table Comparison?
I also add the Map operations to the output of History Preserving and manage each stream of the Insert/Update/deletes separately and control the record start/effective & record end/Expiry dates with more variables based on the stream req, ie updates to end previous record have record end date set to variable for business or run date set to date - 1.
You only need key gen for inserts (including the deleted record final state)
Use merge to bring back together.

I have an iPod 3; Version 6.1.3 model MC540LL//A : Question, When I'm filming a video, lets say for 45 seconds. I click to stop recording video. It does NOT click off. Keeps recording for about 10 more seconds.

I have an iPod 3; Version 6.1.3 model MC540LL//A : Question, When I'm filming a video, lets say for 45 seconds. I click to stop recording video. It does NOT click off. Keeps recording for about 10 more seconds.

First you have a 4G iPod. Yes there is some delay between tapping the stop button and the recording stopping.

HT201274 This does NOT erase all personal information

This does NOT erase all personal information! I have performed this and assumed it did what it's supposed to do. IT DOES NOT. There is STILL personal info left on the device! I want to know how to completely erase the device (iPod Touch 8g).

I wondered about the same thing since I have an extra ipod I'd like to sell on eBay. I tested "Erase All Content and Settings" and can confirm Checkmate357's posting. At the very least, your AppleID remains on the device after "Erase All" and can be found by setting up the "new" ipod then going to settings / app store. I agree that this is a serious matter and it makes me wonder what else might slip through the cracks during "Erase All."
Even after signing out then repeating "Erase All," I found the device would recover my Apple ID and attempt to use it to sign into the APP store.
In a third test, I repeated above then disconnected the dock cable before pressing "start using ipod" and found my Apple ID was no longer there. I think the device may be pulling the user ID from iTunes through the dock connector. But I could be wrong.
It's my understanding that solid state media is easier to reformat and erase because you don't have to rewrite over existing files. If this is true, then this problem should be easy for Apple to remedy this, if it is indeed a problem.

Export Html in Keynote does not include hyperlinks when exported as HTML

I created a new keynote doc, and new page
added an simple image
added a link > to my image using the hyperlink option
the preview section shows the link and i am able to click the link that takes me to the domain or subdomain added.
the problem is when i export it to html that the links does not work
i upload the link to a server and still the link added does not work
anyone had the same experience.
Please advise,
would be great to get some light shed on htis matter
thx in advance

Same problem - but thanks for the idea. It's curious that when I use the touch text tool to change the properties, Acrobat "knows" the correct characters. I can select the characters, change the font, change it back to the original font and all is OK. I though Acrobat used some Illustrator libraries to do the touch up, but i I open the PDF in Illustrator, the bad characters get rendered as object - not text.
I guess it's time find a way to easily avoid the dfonts. Problem is dfonts show up as TrueType in the font selection menu. The only way I know to see for sure that it is a dfont is to look at its extension in finder.
I'm not real keen on using dfonts - I was archiving some old InDesign files as PDFs when I ran across the problem. It's kind of a pain to have to chase the font types/conversions through so many layers. Sigh.

Keynote does not load presentations

I can't get Keynote to load the presentations that are in my iCloud drive. I know they are there, because I can see them on my Mac.
When I change the Keynote settings to use iCloud, the setting does not stick.
Pages and Numbers DO use iCloud.
I'm using iOS 8.2 on an iPad Air v1. I've restarted, tried deleting and reinstalling Keynote, but the problem continues.
Any advice?

There are two options, try option 1 first if that does not work use option 2:
1 - a custom repair for Keynote 6.1
Try this repair for iWork applications, its sorted out many similar problems in the past
ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using Appcleaner from Mac Update to      do this, its freeware
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and      click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped.
2 - Clean install Mavericks by      back up all your work and user files, repartition the hard drive,
then re-install Mavericks
To reinstall OS X, you must be connected to the Internet
Choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
If you’re not connected to the Internet, choose a network from the Wi-Fi menu (in the top-right corner of the screen).
Select Disk Utility, then click Continue.
Select your startup disk on the left, then click the Erase tab.
Choose Mac OS Extended (Journaled) from the Format menu, enter a name, then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X, click Continue, then follow the onscreen instructions.

Idsyncwin does not invalidate old passwords

I am using Identity Synchronization for Windows (part of DSEE 11g) to replicate MSAD accounts into an organization maintained in DSEE, one-way. This works acceptably, except for one nit, which may be a problem to complete the POC demonstration: a change of user password in MSAD does not propagate into DSEE reliably.
To be more specific, when the password is changed in Active Directory, ISW does detect the change and sets dspswvalidate:true as is expected. If the DSEE user logs in with the new MSAD password, this password is validated against MSAD, succeeds, and is saved into DSEE. Likewise, login with a random password fails as expected.
However, if the user logs in with his old DSEE password, the validation against MSAD is logged as successful (which is apparently wrong), but the old DSEE password remains in place. The dspswvalidate flag is cleared and the user no longer has a chance to log in with a Windows password - the old DSEE password remains in place.
I see that when provisioning new users, ISW can place an invalid string into userpassword attribute... can it do the same when it detects changes in the upstream MSAD data, so the user has no possibility to log in with an obsolete password?
Since the ISW is a bit of esoteric and old product with little change from DS5.x times (though works fine with current DSEE and MSAD), possibly a solution would be to make some plugin for DSEE that would detect changes to the dspswvalidate flag and invalidate a password?.. Any ideas how to do this, if all else fails?
Thanks in advance,
//Jim Klimov

So... status update: the problem has been traced to MSAD - the domain controllers trust both the user's new password and the previous password for 5 minutes, which leads to DSEE testing the old passwords if the clients request it to (i.e. regular mail checks), trusting them and saving them for posterity (and removing the flag to verify passwords via MSAD).
The Windows team was not able to remove this behaviour from domain controllers. It is also probably infeasible to change their password-changing procedure to change it twice (so as to forget the previous password completely), or to instantly (programmatically?) log in to DSEE via convergence or ldapsearch or whatever with the new password, or to manually change the email password as well - especially when end-users can change their domain passwords too.
So the problem remains: old passwords are verifiable via MSAD and thus trusted by DSEE, so for example regular messaging tasks running on behalf of users might practically prevent propagation of updated passwords from MSAD domain into DSEE/CommSuite.
One solution that I see is to have DSEE (maybe via its ISW plugin) not remove the dspswvalidate flag for a configurable timeout after it first detected the password-change event on another directory source. This way for some 10 minutes (for example) after the MSAD-initiated password invalidation, DSEE would re-validate against the domain, ultimately making sure that the saved-to-trust password is the new one.
Another idea is to test the user-provided cleartext password against (a copy of) the old DSEE userPassword hashed value, and not save the password if it is positive against both the MSAD domain and old DSEE password.
Both of those ideas rely on changes to the ISW plugin which we can not do to the closed-source program.
A bolt-on solution might be to make a script that runs every minute from crontab, detects new DSEE invalidations and saves a timestamp. Then for those example 10 minutes it would restore the requirement to validate against MSAD, if it detects the invalidation flag cleared during this time. I can foresee how this would NOT work and increase helpdesk calls, with lags upon logins after the password change, on-and-off trust of DSEE to one or another password, and mostly with automated email tasks firing within that minute between script runs so that the password change event, setting of the flag, validation of old password and clearing of the flag all happen before the bolt-on script would detect that anything happened.
MAYBE though, it can parse cn=changelog for a verifiable history of events to detect appearances of the validation flag - even if it has been cleared by the time the script runs...
Still, the bolt-on sounds like an unreliable solution, though doable.
Are there any other ideas or practical advices, remaining withing the constraints of MSAD + DSEE + IdSyncWin? (Implementation of IAMS in particular, to unify this and other identity management is considered, but as a separate project and purchase - so some solution is needed for what they have today)
Thanks,
//Jim Klimov

HT4137 Will doing this erase old text messages? If so, is there any way to avoid losing them?

I just looked read iOS: How to back up your data and set up as a new device. I've been having a few bugs, but do not want to lose my old text messages. Will setting up as a new device and then syncing erase old text messages? If so, is there any way to avoid losing them?

You will not lose text message, if you back up your phone correctly and then restore from that backup. If your going to restore your phone as new and not from backup, then your text will not be there until you decide to restore from that backup.
If you don't want to lose the message, take a look in the app store to see if you can transfer to your computer.

Tuple Record deleted in MDM does not reflect in ECC

Hello Experts,
We have a scenario for central creation of Material master data in SAP MDM 7.1 and syndication to SAP ECC system. We are using tuples for Long text & Alternate unit of measure.
The problem is as below:
If we create a material with 1 or more tuple records for Long text & Alternate unit of measure and syndicate it, it gets created in the SAP ECC system properly.
If we add 1 more a tuple record it gets updated successfully.
But if we delete a record from the tuple for same material and save and syndicate it, it does not get updated in the SAP ECC system.
Please help!
Thanks in Advance
~ Suraj Sawarkar

Hi Suraj,
Or is there some other thing amiss?
Can you please revert with whether this Tuple node Property is required or not in MDM syndicator. I mean in MDM Syndicator-->under Destination Items Tab, Property Required is Ticked in Check box or not.
As I am able to figure it out that this may be one reason, If this is not ticked in check-box then this tuple node will not generate if it does not have any values. I mean in case if you delete tuple record in MDM a file will get syndicated out of MDM without these Tuple nodes. Thus would not able to pass Null to target side structure of IDOC and therefore your Tuple record is not getting deleted in SAP ECC system.(R/3 side). So please make sure that this Tuple nodes must be generated even if it carries blank values (nothing) in syndication files so that you can map with required target structure of ECC IDOC to pass these blank values.
Regards,
Mandeep Saini

Recording narrations in keynote does not erase old narration

Similar Messages

Maybe you are looking for