Recording number of qRFC entries from SOLMAN

Hi All,
We have qRFC's inbetween ECC, SCM, XI. We have configured CCMS agent,EWA,SMD etc on these system.
Is there any way we can measure number of qRFC entris (inbound/outbound) per hour from these system with help of Solution Manager.
Is there any thing through which we can generate report for this.
I checked EWA report its showing weekly or daily total entries.
Thanks,

Do we have give any specific value in Opcode..
CALL 'AB_TEST_KRN'
ID 'OpCode' FIELD 11.
SY-SUBRC < 0: function is not available
SY-SUBRC > 0: SY-SUBRC = # segment entries
Tried with 4.6c with Kernel patch as mentioned in OSS Note 925592
he access function is contained in 46D kernel patch 2202 (patch text:
Access to current count of DSEG entries").
It is giving -1 in 4.6c
and it is giving -2 in ECC 6.0
Thanks
Raghuraman S

Similar Messages

How to get row number of selected entry from OVS search result

Hi,
Anyone having any idea on how to get row number of the selected entry/ how to differentiate rows in OVS search result in ON_OVS method?
Regards,
Jatin

Hi,
You can get the selected record to <ls_selection> structure in co phase 3.
From that structure you can get what ever field you want.,
check the below code for reference,
<< Moderator message - Cut and paste response from F4 help for ALV table field removed. Plagiarism is not allowed in SCN >>
hope this helps u.,
Thanks & Regards,
Kiran
Edited by: Rob Burbank on Jan 5, 2012 5:24 PM

Reg condition record number (knumh)

Hello All,
I want to knw from which tcode the entries of field knumh are getting entered in the table konp.
Where we define this condition record number?
Thnks,
Sunita

Hi
From Pricing related transactions in Both SD and MM modules the data is entered in the pricing related tables KONV,KONP etc
KONP stores the item level condition based amounts.
Not from a single tcode, all pricing related tcodes data will enter into it.
<b>Reward points for useful Answers</b>
Regards
Anji

How can i get the tax code from Condition record number

Hi all,
i have the Condition record number from which i have to get the tax code as i looked inthe KNOP that Condition record number there but no tax code is maintained there.
so is there any other way to find the tax code for particular Condition record number
Regards
suresh

hi suresh,
can u tell me the field name for condition record number and in which table it is stored.
because i knew one condition number which is stored in table EKKO and the field name is
KNUMV- Number of the document condition.
from ekko take relevant details and look for ekpo where u find the tax code
filed name of the tax code id MWSKZ- Tax on sales/purchases code

Once I updated to OS 6 all my calendar entries from early in the year have disappeared. I need them as a reference and record of activities how do I restore them?

Once I updated to OS 6 all my Calendar entries from the early part of the year disappeared. I need them as a record of PD activities how do I restore the earlier entries. The new future activities are there just the old ones have disappeared.

Well, that would depend on what calendar you are using.
If you are simply relying on the calendar on the device, well, that's not very smart. Restoring from backup should put everything back.
If the calendar is synced with another service, like Google, iCloud, Exchange, do the entires still exist there?
If the calendar is synced with Outlook or iCal on your computer, do the entries still exist there?

Finding CRM Order number from Interaction Record number

In our scenario when a CRM Order is created, an interaction record also gets simultaneously created. If I want to find out the Order number based on the corresponding interaction record number, how will I achieve it through linking tables?

Hi,
Use FM CRM_ORDER_READ and check ET_DOC_FLOW.
Hope this helps!
Best regards,
Caíque Escaler

Deleting existing record from the oracle if same record number is passed

Hi all ,
My requirement is as follows.
There is one condition in XI which restricts certain work groups,These work groups will be changing contantly.
Now my requirement is that ,if a record number say 100 exists in my oracle database,when the same record number is passed again,it should delete the old record which is already in the database and insert this new record.In other words all the records which are sent must be inserted with out duplication.
How to achieve this functionality through XI.
let me know.
Thanks,
Srinivasa

Hi ,My target structure is
Target->Statement->Attachments-
                                                 action=UPDATE_INSERT
                                                  table=xxxxx
                                                ->access-
                                                               Field1
Field2
                                                               Field3
                                                               Field4
                                                               Workgfoup
Now let me noe what are thte modifications required in this structure to achieve my functionality.
Thanks

Locking a block after X number of user entry records

Is there a way to lock a block after X many records have been entered by the user? I dont have a problem after the
data is entered and saved, its just when they are entering the information the first time do I see the problem where the user can use the enter key and since my block navigation is next record they are able to go to the next record in block also that way. I have tried using triggers (when-validate-record it only catches it after they have already entered data, pre-record,next-record, does not seem to be able to see the :system.cursor_record variable. I need to be able to say, if the next record is X they can not navigate to that record. Any pointers in the right direction would be greatly appreciated.
--pnh

Use when-new-record-instance trigger, and check :System.trigger_record rather than :system.cursor_record for the record number.

Record-number from SQL Loader

Hello All,
Is there a way I can add line-number/record-number into my tables. For example if my input file has 10 records, I want 10 rows with record_number=1-10?
Need your help!
Thanks

Maybe (s)he wasn't referring to "sequence" the database object ... rather, the "sequence" parameter for SQL*Loader.
Anyway, I think you need RECNUM ... search the doco for "RECNUM" ... close by you'll find explanation on what "SEQUENCE", the SQL*Loader parameter, does too.

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

Error in creating New Entry from the Client in NW Mobile 7.1

Hi All,
I have created a mobile application for Laptops in NW Mobile 7.1.
I have a requirement to create an entry from the client, i.e., I need to create a PR in the client. The model bindind, the backend adapters, bapi wrappers are in place.
I have used the standard create BAPI for PR and wrapped it in a BAPI wrapper. I just have to give the PR details and save the entry in the client. The BAPI wrapper has the logic for generating the new PR number.
My problem here is, when I try to create a new PR, give the details and save, the entry is not getting updated in the backend and the sync state is '201'.
I checked the "Message Monitoring" in the NW Mobile Administrator for the particular SWCV.
For this create PR transaction, the particulars are as below
Message State: Error - Stop Flow
Message Type: Transaction
Error: "Error occurred while fetching synckeys from table ZDOE01700000SL"
"ZDOE01700000SL" is the Sync key look up table for PR(my data object).
Please let me know where I have gone wrong and guide me in rectifying this problem.
Thanks and Regards,
Sunil

Hi Sunil,
From my understanding, looks like you are not filling synckey when you are creating a PR in your client. Synckey is a unique key on the DOE using which you can uniquely identify any node.
There are two scenario's atleast as I know, where this error would have come.
Case 1. If you are modifying something on client, which has been send by DOE, then you are not supposed to change synckey because it is a primary key. Now if we assume that you are not modifying synckey but when you are sending an update, check if by any chance the synckey is not going to DOE which is one case, and the second one is, after DOE has end that record to client, someone has cleaned up all the tables on DOE for that dataobject or someone has deleted that entry on the backend because of which the entry has been deleted on DOE. In either case, you are modifying something on client which is actually not present on DOE because of which when the DOE tries to look up based on synckey it doesn't find the needed record.
Case 2. If you are creating something on client, then you are supposed to create a synckey which is a 32 bit character GUID. I think in your case, you are missing the synckey when you are sending it to DOE. Check if there is any API for doing that or you have manually create a GUID and send it.
Hope it works out.
Best Regards,
Siva.
PS: Reward with points if you find the post useful.

PO item Condition Record number and delivery address of PO - Need a table n

Hello Experts,
I need some help as I have searched enough but did not find any solution.
I need a table name where I can find Condition Record number for PO line item.
As I have to create a new PO Layout in which I have to mention each & every condition type with value for line item.
I need to know one more thing that from which table I will get delivery address number so on the basis of that I can read entries from table ADRC.
Thanks in advance.
Bhagat

HI,
The First Question is regarding the PO Conditions.
For Extracting the same. we have to Go to The Table EKKI and in this table pass the PO Number and after entering the PO NUmber ,at each item level we will have a condition record number KNUMV created,
collect the condition record number and pass the value in KONV table ,in that table we will get all the conditions and its values maintained.
The second question is the delivery Address
the Delivey address comes from four ways
Plant
EKPO -Pass PO NUmber - collect the plant and pass in table T001W to get the address number
and pass the address number to ADRC table
Customer (third party)
IN table EKPO -collect the customer Number-KUNNR and pass that value to KNA1 table and then get the address number and then get the address from ADRC table.
Direct address number ( created by t code MEAN- Type ME01)
This adress number-ADRNR can be taken from EKPO table and pass this value to adrc table to get the address.
Vendor ( subcontracting)
In this IN EKPO we will have the vendor field -LIFNR and this field collect the vendor number and pass in LFA1 and get the address number and then pass the address number to ADRC table
If in EKPO,the address number and customer vendor field are blank then it picked from the plant and we have to default the Plant Address
Hope so it helps
Regards
Anjanna.

Function module to find number of table entries in Data base table

Hi All
I have the urgent requirement to find out the number of table entries in a table using the function Module.
if u know the Function Module name please let me know
Thanks & Regards
Rajmohan.G

You can calculate the total number of records like this.
TABLES : ztable.
DATA cnt type I.
Select count( * ) into cnt FROM ztable.
Regards,
Santosh

Master Data Deletion : Logs of deleted MD entry from a MD object

Hi All,
I need to find details of deleted MD entry from a MD object and by whom ?
In SLG1, I'm able to find only the logs showing deleted SID number. and user who has deleted it with date.
But where, I can find what that deleted MD record is ?
Thanks in advance !

Is there any way to find it out ?

Recording number of qRFC entries from SOLMAN

Similar Messages

Maybe you are looking for