RECORDING ON SOUNDBOOTH (WHILE) HEARING INSTRUMENTAL PLAYBACK

im new to soundbooth, im familiar with Adobe Audition, i figured it might be the same just more upgraded... i guess i was wrong (in a sense) can somebody out there PLEASE help me, im stuck here with a great program but clueless on how to record while hearing my instrumental playback to make my music.

Hi,
Soundbooth is a multitrack editor, but right now is not a multitrack recorder.  For the more advanced multitrack DAW tasks and features, I would recommend Audition which will offer full monitoring, track input and output assignments and routing, live effects, and more.

Similar Messages

  • No sound while recording but I can hear during playback

    I plugged my iRig HD in my macbook air (Yosemite), opened garage band and configure input output settings. While I was recording couldn't hear any sound but during playback I could hear clearly everything. I haven't got any problem on Amplitube 3. Is there any different settings on garage band?

    What if I want to use mac's speakers or an external speaker
    As long, as are not recording using the internal microphone it should work to change the output in the GarageBand Preferences > Audio to System Settings and to set the System Preferences > Audio > Output to the internal speakers or the internal output , if you have speakers plugged in instead of your headset.

  • I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.

    I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.  I tried different input and output settings but it didn't help.  Any help will be appreciated.

    Hear your microphone or instrument as you play and record (monitoring)
    You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
    You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
    Hide
    To turn on monitoring in the track header:
    Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
    Click the Monitor button in the header of the track you want to use.
    HideTo turn on monitoring in the Track Info pane:
    Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
    From the Monitor pop-up menu, choose one of the following:
    Choose Off to turn off monitoring. You can hear your instrument only while you record.
    Choose On to turn on monitoring and protect against feedback.
    Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
    For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
    You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
    If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
    SEE ALSO
    If you don’t hear sound from a Real Instrument 
    Was this page helpful?Send feedback.
    © 2010 Apple Inc. All rights reserved.

  • How can I save the modulation I apply to an instrument during recording such that it remains during playback?

    How can I save the modulation I apply to an instrument during recording such that it remains during playback? For example, I apply modulation #8 during recording, but when I play the track back the modulation is not incorporated.

    Hi Vlad,
    Unfortunately, I don't think there is a way to programmatically read the voltage output to the drive, as the voltage is all determined internally by the controller circuitry on the board. Depending on the controller though, you may be able to physically route the output terminal to a spare analog input channel and read in the voltage that way. This example Analog Input with 73xx Motion Card shows you how to program LabVIEW to do this. 

  • I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twa

    I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?

    This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
    On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track?

  • "recording what i can hear" in logic ??

    Hi, i want to record what my computer is playing for sampling purposes. I can do this type of thing in sony acid it gives you a "record what you can hear" option but im quite new to logic 8 so im not sure if i can do that?!?!?
    Thanks in advance guys
    D

    So I've read most of the getting started thing and it tells you all kinds of things about editing songs etc...but it doesn't seem to say anything about not being able to monitor the sounds yo are recording. Example when I click the record button and have a track record enables it shows the information being drawn on the arrange region area but I can't hear the notes I am writing with the keyboard while i am recording nor playing it back...but..I can hear the click track which tells me the monitors are recognizing the data sent from logic to the interface..so the underlining problem is basically how can I get the sound that is being written through my monitors? Did I assign something wrong in the start up assistant or what?

  • 6Controling recording through "What you hear",

    Dear community, Breif question, Is there any way to control what i record through "what you hear"?
    Im using "Creative MediaSource 5" to record. I'm recording a radio show through Internet Explorer 8, and its two hours long. I've turned off windows sounds, but if i play a game, or video it will record that sound aswell through "what you hear", obviously which i do not want. I feel restricted on my computer while recording and don't think i should be with a product from top developer like creative. I found small fix by using windows 7's sound mixer and turning down volume on all other open apps but it would be ncie to implenet this into a seperate "what you hear" mixer recording. If you know of any third party apps i would be much obliged if not don't you think this would be something to implement in the future?
    Thanks for taking the time to read my issue and hope you can solve my answer and look forward to your comments.
    Regards
    Revs

    Problem resolved. Follow Creatives FAQ advice on uninstalling the Soundblaster device drivers...it's on this web site. Follow all the steps, but include deleting "Creative" out of the registry. This worked for me. I can not guarantee this on any other users machines. I'm assuming that the drivers get's damaged.
    Good luck.

  • How do I record what I can hear?

    I use Cowmon Media to record what I can hear on my Dell Inspiron laptop.  Purchased a Toshiba Sattelite and tried to do the same thing.  It will not work.  All I see for recording devices is my microphone.  How do I set up my TS to record what I can hear?

    There are many ways to record drums depending on what the final goal is and more important budget. You can start with one or two carefully placed mics to a mic on every drum and many will even add in some midi triggers.
    If you have a Apogee One you could just use the built in mic and try experimenting with placement.
    And you are going to want a set of headphones to monitor the playback not a speaker. A set of speakers and a open mic will feedback.

  • We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

    We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

    Badger33rk wrote:
    Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases.
    turn the Ducking menuItem off

  • Few records are missing while downloading to a Spreadsheet  from a Report

    Dear Gurus,
    few records are missing while downloading to a Spread sheet from a Z report.  There are around 300 records, out of which 11 records are not appearing in Spreadsheet file after saving.  But, the funny thing is when i try to save in other format like, HTML or to a clip board all records are coming. 
    When asked, the ABAPer said -
        your report is coming correctly.  if the report is wrong then we can try checking some code in the Z report.  Saving it into Spread sheet is the standard program provided by SAP.
    He is also facing this problem for the first time.
    Can anybody help.
    Thanks in advance and u will get points if useful.
    Regards

    Hi,
    Few days back we got this kind of error, when i tried to down load the asset balances in excel format.
    It was observed that, for one of the asset description ends with cama",".  Due to this reason all other details has been stored in single cell.  Once we changed the master data of that asset, then we able to get the report properly.
    2) Some other time, when we tried to download material master details, for one of the material ... description not maintained.  this is another issue. After maintain the description problem got resolved.
    Hope this information will be helpful to u.

  • My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    1357b wrote:
    My iphone 5 ATT, i can hear the recording
    What recording?
    but can not hear anything from neither ear speaker or loud speaker when i call?
    You just wrote you could hear the recording...
    You can take it into an Apple store and have it checked out.

  • Want to record what I'm hearing on Aux 4 when soloed

    Hi, I've an effect on bus 4, that I want to record to an audio track...
    I want to record what I'm hearing exactly/only when I solo bus 4
    this bus has a flange effect 100% wet and is a really exaggerated flange effect...and loud too
    Currently, I can only figure to put input of audiotrack as bus 4 but this for some stupid reason is not working....
    all thats getting is what I'm SENDING to bus 4, a basic Closed Hat.
    Now I've been talking to a guy who seems to say my problem must be my send control is to little BUT
    even when I turn this full, the signal picked up/recorded to the audio track with bus 4 as input is STILL
    just the originasl hat sound- no flange.
    A solution to this would save me going mad here today!
    p.s can't bounce unfortunetly because I dont want to dither twice at 24 bits, which also the finished track will be later
    ..which is a totall different topic I don't wasnt to get into
    thanks

    What you want to record is not bus 4, but the Aux channel that is receiving the signal from bus 4.  Set the output of the Aux to a different bus, then use that as the input to the audio track.

  • Is it possible to record an image while recording a video??

    Is it possible to record an image while recording a video??, i know it is possible when the camera is just showing.

    Ok i 'm developing an aplication for a hospital where the doctors use the system. For example a pacient goes to take an endoscopy chekup, where the doctor introduces a little camara into the pacient body to see the problem,so the system must be showing that, with this there is no problem JMF uses a Player to do that, the doctor can see what is going on and take a snapshot(image) at the same time. The problem is that when the doctor starts to record a video and at the same time wants to take some snapshot of that video recording.
    I use this line of code, but it returns null, and got this message: player doesn't support FrameGrabbingControl.
    FrameGrabbingControl cg
    cg = (FrameGrabbingControl) processor.getControl("javax.media.control.FrameGrabbingControl");

  • I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording; but when i hear it, its just a long beep. Need some help!

    I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
    but when i hear it, its just a long beep. Need some help!

    Does the mic work for other apps like Voice Control?
    Does the mic work OK in other devices?
    Have you tried it with another mic?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

    i have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

    sounds like ur ipod's mic is blocked with something check the back on the ipod near the back camera

Maybe you are looking for

  • Database content not showing in JSP page

    hi guys, I am having problems with showing the database content in a JSP page. I check my database and see that the content do exists. Can someone pls kindly advise. Below is my code: <TABLE BORDER=1 CELLPADDING=0 CELLSPACING=0> <TR> <TD>Last</TD> <T

  • I need help adding alias to keystore

    Hello! I'm have a project, is to generate digital signs, for this project I have create a Keystore, add Alias to the Keystore, generate his digital signs, sign files and certificates. Also I need that the Certificate fingerprints be unique for each u

  • I can't get a dvd to play on my new iMac?

    I inserted a dvd into my imac and it asked me to change the country code as the dvd code and the imac didn't match.  I changed it to you US or North America, whatever the code was and I still can't play the DVD.  Any idea why?  Can't I use this as a

  • Web survey for Vendor Evaluation

    Hello Experts, I have created a web survey, and send it to supplier on his GMAIL ID. Now he can see the survey questionier on his GMAIL ID, but when he tries to submit survey using send survey button, nothing is happning. Means, Send Survey button is

  • Garbled fonts on internet... HELP!!

    Text on certain web pages appears garbled -- as if a font is being replaced with fractions and superscript figures. Even while trying to register AppleCare on this website, the copy in the form was garbled. I ended up mailing in my registration. Corr