Recording output from Apple TV

My Apple TV is connected to my TV via HDMI2 which works fine. I would like to record some output from my ATV, my TV only has video inputs for component and standard video. If I buy a DVR will I be able to record from my ATV?

Note, any content that goes to the AppleTV that is copyrighted is specifically forbidden from being recorded by law. We can't discuss breaking the law on this forum. If you have your own non-DRM content you wish to record, that's what the computer is for with video tools such as iMovie, and Final Cut, and Premier.

Similar Messages

Can I get an analogue output from Apple TV?

I am trying to connect my Apple TV to the Zone 2 of my AV receiver and it requires an analogue output. I purchased a digital to analogue converter and am running an optical cable from the Apple TV to the converter. It hasn't worked. Is there something I should be doing or trying?

If you have it set for Dolby Digital out I'd alter that to Off in Settings as the DAC probably only handles stereo.
AC

Sony Bravia Z5500 will not recognise HDMI output from Apple TV 2nd Gen

After a frustrating time trying every connection possibility - various HDMI cables, all 4 slots, I still had no picture or sound. A week later (living so far from the shop) - I( angrily confronted stafff and told them I had a dud Apple TV. I had spent hours on the phone, firefox, apple and sony sites.
They took it from me and plugged it into a samsung 3d tv and - hey presto - instant picture. I feel like an idiot - and I thought I knew all about technical issues. But this is just annoying me. They looked at this old man and just shook their heads. I am resorting to the hope that someone out there knows the answer ... ??

got a bravia KDL-40WE5W and my appletv 1g never had any problems but if you messed with hdmi settings if thats possible and forced it to use various overscan only accept 1080p or something that could cause problems I guess

I am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. please help

i am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. Thank you for any advice.

What output are you trying to get to your tv?

HT201303 I received this update from Apple, but I have no record of altering anything, can you tell me what has been updated, who updated anything, and how was it done? Hello, The following information for your Apple ID was updated on 03/22/2014: Phone

I received this update from Apple, but I have no record of altering anything, in particular telephone numbers, can anyone tell me what has been updated, who updated it, and how was entry made to my account?
Hello,
The following information for your Apple ID was updated on 03/22/2014:
Phone number(s)
If these changes were made in error, please CLICK HERE, to Cancel this changes withing 24hours..
This is an automated message. Please do not reply to this email. If you need additional help, visit Apple Support.
Thanks,
Apple Customer Support

This is a user to user forum, so no one here can provide an answer. You should contact iTunes Support directly.
Here's how you can do that: http://www.apple.com/support/itunes/contact/

HT4437 using airplay from my ipod touch 4th gen. no audio output from the tv. on the ipod it shows that it is streaming to the apple tv. whats the problem

i get the air play icon on my ipod touch. when i click it the output from my ipod stops but i dont get any audio from my tv. whats the problem?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

You will probably find better support about the features of the Webex app on their support page here: http://www.webex.com/products/web-conferencing/mobile-iphone-ipad-faq.html
Doesn;t look like it's listed as a feature of the iPad app.

Hello. Since I bought my new MacBook Pro I am having issues with the home sharing with Apple TV. I can't access my computer from the Apple Tv, although both home sharing options are on. I can choose Apple Tv as an output from my MAC though.

Can't see my computer from the Apple Tv although home sharing is on in both devices and I can choose Apple Tv as an output from my computer.

The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer
General Homesharing Help 3
(75) (10) (35) (-30) (140226)
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Home Sharing
Security Software Issues
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

While recording a guitar do not record the output from other tracks

Hi all,
I'm an audition/recording newbie. I have Audition CC. I have recorded one guitar track. and now I'd like to record another one. The problem is that when I try to record it the output from the other one gets recorded as well. I do want to hear the output from the first track while recording track 2 but I want only to record my guitar playing in track 2.
Thank you.

The basic problem here is not actually caused by Audition, but by your sound device mixer, which appears to be letting you record everything you hear - so that will be the guitar part you are playing, and also the replayed tracks that you've already recorded. In Windows, the fix for this is generally to make sure that the recording source is set to be just the input you are using, and not 'what you hear' or whatever it is on your device. The playback part of the mixer should let you monitor both the wav playback and your source, which is what you need to be doing - it's only the record settings you need to look at.
If you are using a Mac though, I can't help you because I don't know anything about how they work from that POV, but I'd imagine that it must be similar.

Tracking issue - can I get records from apple

My partner and I have recently split and I believe she has been tracking me, our iphones were paired to each other and her ipad and I would like to know if I can request the records from Apple even though the account is in her name?

No.
She would be tracking your iPhone how?
If with Apple's Find Friends app, you control that on your iPhone.
If your iPhone is hacked with the cutsie term for that "jailbreak", restore your iPhone with iTunes as a new iPhone or not from the backup.

Unable to output from FCP to Canon XL1.

I have an eMac with Final Cut Pro 4.5 HD. I also have a Canon XL1 3 CCD camcorder.
I have no problem capturing footage from my camcorder to my eMac on FCP. I can also connect my Canon to my VCR and record off my camcorder to my TV, as well as play the tape on my camcorder to watch it on TV.
However, I cannot output from FCP to my camcorder. The 4 to 6 FireWire is attached to both the camera and the eMac and I checked the Log and Capture feature and FCP does recognize a camera or deck is attached. I've been trying to output it using manual record in which I press record on my camcorder and play the playhead on FCP. As I record, there is no picture on my viewfinder, nor any audio being recorded and when I play it back, I just get this blank blue screen, but the timecode is recorded.
Am I missing something here?

ensure the following are set
View>Video Playback>Firewire Apple 720x480 (NTSC or PAL - whatever is appropriate)
View>Audio Playback>Audio follows video
View>External Video>All Frames
If this isn't what you are set to do, you won't be sending video out to your recorder.
x

No video output from MacBook Air micro DVI to Polaroid HDTV via DVI to HDMI

Grrr! What's going on? The Apple online store finally sent me a micro DVI to DVI adapter and a DVI to HDMI adapter cable as well as headphone output to RCA adapter cables (for separate audio, since DVI will not transmit audio) and I hooked it up and - NOTHING! When I initialize the appropriate input setting on the Polaroid 27"HDTV the MacBook Air seems to get some sort of query signal as its screen flickers for a moment and turns to a grey screen for a couple seconds but then, that's it! Nothing! The Polaroid's screensaver remains and no signal, audio or video, is transmitted. Now, the micro DVI to DVI adapter is Apple proprietary so I don't think it is a DRM related issue where the chip might block the video signal coming out of the MacBook Air. The longer, DVI to HDMI adapter cable is by Belkin. Am I overlooking something? Could the new 27" Polaroid HDTV not be compatible with DRM protocol? I don't think so since all digital TVs equipped with an HDMI input are supposed to have DRM compatibility built in. What gives?

Well, BSteely, where to begin? After my extensive discussions with more than one support engineer at Apple in Toronto as well as in Austin an interesting picture is emerging. Seems that I'd omitted a few things: First, I was not trying to display HD content but rather standard definition content. Second, I made the mistake hoping for an elegant and easy solution in hookup via HDMI (new flatscreens don't even have a DVI port anymore) - bad mistake! As one of the technicians put it, HDMI is an "unsettled" platform when it comes to HDCP, currently in version 1.4 , meaning, I should have tried VGA instead, a "settled" platform after all. Now, whether this will work remains to be seen because I don't have a micro DVI to VGA adapter yet but suffice to say that in essence I've been getting the message from Apple that, yes, the MacBook Air will - in the near future - support HDCP, but for now it does not contain the necessary software simply because HDMI is in its forth incarnation; plus, as they put it, Apple can't be responsible for testing compatibility with every single HD television set on the market - while it is true that there are thousands in existence, at the same time there are only four versions of HDMI with different HDCP specs! So, while I may be partially answering my own query here, it seems that Apple at this point is not particularly eager to make this software available because they rather would like to sell their new displays with the micro DVI ports instead of us endusers being able to hook the computer video signal up to just ANY monitor or TV. In the end, it is my hope that they will reconsider and not forget who their customers are, maybe after the Christmas season....

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

Stolen iPhone 4 and follow-up Call from Apple

Hey guys,
My girlfriends iPhone 4 (32GB locked to Rogers) was stolen about a week and a half ago. She had Find My iPhone on it and we used it to lock and clear the phone right away, but since the phone was already turned off we were not able locate it. We get an e-mail the next day from the app saying that the lock and message were sent, which means the person who stole it probably turned it on. We still weren't able to locate the phone using the app so we just assumed they re-formatted the phone, cleared it, and logged out of iCloud. We thought end of story, we lost an iPhone, but there's nothing we could do. We go to an Apple store, tell them the phone was stolen and they proceed to use Find My iPhone to clear and lock the phone again (they say they weren't allowed to brick it and we weren't given the option to report it stolen).
Anyways, fast forward to a week later (night of Monday, Nov 5, 2012). We get a call from apple (call center 512-674-2000). The caller is Betty who works for Apple and she asks us if we have sold an iPhone on kijiji/eBay recently. We tell them that we've actually recently had the phone stolen and ask if someone's returning it. They say not quite, just that someone was tryign to contact apple with the iPhone's serial code. Unfortunately at this point the phone is very low on batter (<10%) so we ask if they can call back at another number. Betty says okay. We don't get a call back.
We call back the apple number that called us, but the call center is closed (it was around 8:15 EST). So we call the Apple Canada Hotline (we're from Toronto). The issue gets escalated to a manager and they're pretty much saying there's no notes on why the call was made. There definately has to be a reason for apple to call us asking if the phone was sold right? They tell us to call the number that called us earlier the following day to see if we can contact Betty who called us earlier. However, they do tell us that they ahve on their record that Betty called us, and prior to that, someone called with an issue about the stolen iPhone's serial code (we had not called in).
So we wait until the next day can call the 512 number. Pretty much we keep getting passed around with people telling us they can't do anything since there's no notes on the file and they can't redirect us to Betty.
My question is: There HAD to be a reason why they called us right? The phone was stolen at a friends house, where we thought we knew everybody. If we can get any information on who the original call was from maybe we can find out who stole the phone? Has anyone had a similar experience or does anyone have any advice on what to do? I'm sure apple knows something, but they are just not telling us. Sorry for the lengthy post, just wanted to get all the details out there! Thanks for any help!

But if an issue is reported using the serial code of the stolen product, could they not tell me what number it was called from?
I understand that they can't do much, but I just wanted to know the original reason why Apple called us in the first place to ask whether we sold the iphone on kijiji or eBay recently.

Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

Can not Update icloud for win7 Gets
Sheep error during transformation. check that the indicated transmitter propagating path is valid.
tryet in appel updater and tryet downloading from apple but the same

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Recording output from Apple TV

Similar Messages

Maybe you are looking for