Recording Problem with Windows 8 and Itunes 11

I have Windows 8 on my HP G72-B60US laptop. I also have downloaded Itunes 11, I cannot burn music to a disc. Any help would be appreciated.

Sync it the same way any other iDevice would be synced on any other version of iTunes running on Windows or a Mac.
Plug it in.
Select the content desired to sync.
Sync.

Similar Messages

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

Problems with windows 7 and itunes

I purchased a new computer which now has windows 7, I am having a problem with iTunes sync my iPod. I have installed iTunes 3 different times and it still wont sync my iPod touch. I have the first version of the iPod touch, I am out of solutions on what to do I don't want to have to lose all my music, pics and apps.. Any suggestions on what to do and how to fix this problem thank you!

Have you tried transferring all of your purchases?
To do this, plug in your iPod with iTunes open. (if it starts to sync, let it). Once it's done syncing, keep your iPod plugged in. Go to "File" at the top of iTunes and find "Transfer Purchases from iPod". Click that. It should start transferring everything from your iPod into iTunes. Once it's done transferring, sync your iPod again (just to be safe). Once it's done syncing, unplus your iPod and check each tab on the navigation bar to see if your stuff has transferred and synced (For example, if you transferred music, click the "Music" tab on the left navigation bar, for apps, click "Apps", etc.)
This worked for me when I couldn't figure out why my stuff wasn't transferring from my iPhone to iTunes by just syncing. I have to transfer purchases every time I download a new app, song, book, etc. Hope this helps!

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

I have been using iPod touch and iTunes with Windows XP - no problems. I now have a new computer with Windows 7 Home Premium. When I try to sync the iPod with Windows 7 and iTunes it will not transfer all my photographs. What can I do?

When I tried to sync my iPod Touch with my new computer none of the photographs were synced. I use Adobe Photoshop Elements 10. When I did it the first time the photographs were all muddled up in their albums. When I tried to sync again the photographs were all removed. On the third try I received an error message something like 'Unable to sync photographs program cannot be found.' Can anyone help. (It may be to do with Windows 7 and Libraries??)

Did you already try to delete the photo cache? iTunes: Understanding the iPod Photo Cache folder

Hotsync problem with Windows 7 and Outlook 2007

Hello,
I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
- Not Synchronized
Outlook Contacts synchronization failed
When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7.
I hope someone have a solutions for this problem.
Post relates to: Tungsten E2
Post relates to: Tungsten E2

My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007. Did anyone find a way to do this?

Problems with Windows VISTA and WPA-2

Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?

Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Boot Camp problems with Windows 7, and a new Macbook Pro

When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
1. No sound with my new Windows 7 64 bits.
2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
Please help.

Problems with windows update and fingerprint

HI
My windows was out of date and in the coarse of trying to update it, the system runned into a problem and the only way i could get back my information was to let the system settings go back to its default settings. Following that, i find it difficult to download new updates and the fingerprint is also not working any more. Please what should i do ?

Hi @CLEPRIS ,
Thank you for visiting the HP Support Forums and Welcome.It is a great site for information and questions. I have looked into your issue about your HP-ENVY m6 Notebook and issues with Windows Updates and the Fingerprint reader software. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that might need updating on your system.
It shows me that there seems to be interference with Software task, usually your virus protection.
You might have to disable this software and then run the Windows update.
I would suggest to uninstall HP SimplePass and reinstalled the latest version for Windows 8.1.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
I hope this fixes things up for you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Ratpoison: Problems with windows autoscaling and conky statusbar

Hi all!
I am newbie with ratpoison and yesterday made fresh installation. Everyting else did well expect window autoscaling and conky + dzen2 statusbar.
What I did:
I followed those steps from archwiki for setting up dzen: https://wiki.archlinux.org/index.php/Dzen
my .conkyrc looks like a same as in the wiki:
background no
out_to_console yes
out_to_x no
update_interval 1.0
total_run_times 0
use_spacer none
TEXT
^fg(\#ff0000)${loadavg 1 2 3} ^fg()${time %a %b %d %I:%M%P}
my .xinitrc looks like:
#!/bin/bash
FG='#aaaaaa'
BG='#1a1a1a'
FONT='-*-terminus-*-r-normal-*-*-120-*-*-*-*-iso8859-*'
conky | dzen2 -e - -h '16' -w '600' -ta r -fg $FG -bg $BG -fn $FONT
feh --bg-scale /home/tetrao/walls/hn.jpg &
# setup urxvtd daemon
urxvtc "$@"
if [ $? -eq 2 ]; then
urxvtd -q -o -f
urxvtc "$@"
fi
unclutter -root -grab -idle 1 &
exec ratpoison
and .ratpoisonrc
startup_message off
escape C-z
set padding 0 16 0 0
bind x exec $(dmenu_path | dmenu)
bind C-x exec $(dmenu_path | dmenu)
bind c exec urxvtc
bind C-c exec urxvtc
bind b exec uzbl-tabbed
bind C-b exec uzbl-tabbed
# Undo
bind u undo
bind C-u undo
definekey top Print exec import -window root ~/ss-`date +%Y%m%d%H%M%S`.png
definekey top S-XF86AudioRaiseVolume exec ratvolume Master 3%+
definekey top S-XF86AudioMute exec ratvolume Master 0
definekey top S-XF86AudioLowerVolume exec ratvolume Master 3%-
definekey top XF86AudioRaiseVolume exec ratvolume PCM 3%+
definekey top XF86AudioMute exec ratvolume PCM 0
definekey top XF86AudioLowerVolume exec ratvolume PCM 3%-
definekey top C-S-Up focusup
definekey top C-S-Left focusleft
definekey top C-S-Down focusdown
definekey top C-S-Right focusright
definekey top C-M-Up prevscreen
definekey top C-M-Down nextscreen
definekey top M-l exec ratpoison -c "select -" -c "gprev" -c "next"
definekey top M-h exec ratpoison -c "select -" -c "gnext" -c "next"
definekey top M-j next
definekey top M-k prev
So I did 16 pixels hole for the conky statusbar. Still I cannot see anything on the top of screen. (Just empty hole)
Problem with windows autoscaling is that it doesn't fullfill whole screen. I can also see two additional small holes at the bottom and right side of screen (eventhought I didn't made those by the config). Strange isn't it?
I put my print screen, hope it tells more about the problem:
What I should to do text? Edit some files, but I dunno which one and how?
I appreciate your help.
Cheers!

fr33ke wrote:
About the small holes, see "Why is there a small gap between my terminal and the edge of the screen?" in the ratpoison FAQ.
I'm not sure about your dzen/conky problem, maybe you need to "unmanage" its window? See the ratpoison documentation.
That fixed autoscaling issue. Thx a lot!
Any ideas, what is wrong with dzen+conky bar? I quickly read ratpoison manual and didn't find any help for this problem.

Unknown device - ipod nano fine - problem with windows xp and usb root hub

Greetings all. I've seen this question come up over and over again and have been working on it following previous posts and posts on microsoft and hp sites for a couple of days now.
First off - the ipod nano is fine. Works on my son's computer well.
When I plug it into my 6 months new HP Pavilion laptop it says: 'found new hardware' and goes through the process of installing it, says it's been installed, but then shows 'unknown device'. In Device Manager it tells me there are no drivers installed, but when I try to follow the other instructions on this forum to update the drive to USB mass storage device (usbstor.inf), it tells me the best driver is installed and won't do it.
Many seem to have this problem with devices other than the iPod on Windows service pack 2 so I went to the Microsoft forums and they seem just as puzzled. I've updated all my Windows & HP software to the latest possible versions. The problem is definitely in the USB. Once, when I uninstalled the USB device and then rebooted the computer with my iPod still plugged into the port, it found my iPod, correctly identified it, and for a blissful moment I thought everything was fine! Then it reinstalled the USB drivers and made a comment to the effect that I should move the iPod to a USB 2.0 port for more effective operation and the iPod disappeared again.
I have 3 USB ports on my laptop, all are USB 2.0 and all 3 have the same problem.
I've tried all the stuff people have already said on here...does anyone have any NEW ideas? I'm hesitant to take it in for service because it seems to be a software problem that should be fixable.
Thanks in advance for your help and sorry about the long post.

This isn't a solution, but it's something I just tried and it may provide someone additional clues about's going on. I too think this is some sort of USB problem.
I have 6 USB ports. Two of them are USB 2.0. Since I applied the 03-23 update my computer hasn't recognized my nano at all. I would connect my nano and I couldn't get it to show up in My Computer, in iTunes, or on the far right side of the Start taskbar.
I just tried plugging my nano into the first USB port of my USB 2.0 pair and left the second 2.0 port empty. I then rebooted with the nano attached. Viola - I get a "Found New Hardware Apple iPod USB Device" message. My nano is now flashing "Do Not Disconnect." A small removeable storage icon with green arrow now shows on the far right side of the Start taskbar. If I click on it (like you're going to eject it) the note displayed says "Safely remove USB Mass Storage Device - Drive (F:)".
If I go into My Computer, "Removeable Disk (F:)" now shows there. However, if I try to follow Trevor's instructions in another post to "go into My Computer with iPod connected, right click it, wait till the right click menu comes up (could take a few minutes); click Format, . . ." I'm stuck. I do the right click, watch the hour glass and wait for the Format menu to come up but it never does. Eventually the hour glass just goes away. No message, no Format menu. The waiting hour glass just goes away.
My computer isn't as new as yours, but like you I am completely current on maintenance.
I'm going to keep trying . . . If anyone has any ideas, please let me know.
Dell Dimension 8100 Pentium 4 Windows XP Service Pack 2 Phoenix ROM Bios PLUS Version 1.10 A09

Compatability Problem with Album Art and iTunes in Vista?

Hi there,
I have album art for all of my music which I have added myself. (I prefer to do so instead of iTunes doing it for me.) However, after purchasing a new computer using Vista, I've encountered a problem.
When I drag and drop my music into iTunes, only about half of the album art shows up. The rest either isn't loaded or isn't identified by iTunes, even though I know it's there.
In fact, you can see the album art icon associated with each file when it's organized in its folder on my C: drive. But again, for some reason, much of it isn't loading when I open the files into iTunes.
I never had this problem using XP. Is it a compatability issue or is there a simple fix I'm unaware of? I'd really appreciate any help!!
Thanks,
Michael
HP Pavillion dv6000 Windows Vista

Alright, my apologies, Chris. I don't think I explained myself clearly enough. The files are embedded with the music (these are the same music files that worked just fine in XP.)
The artwork isn't separate from the actual music file. When you click on the actual music file, you see the ICON associated with the file, and it's the artwork. I suppose that's just a new Vista feature.
However, I embedded all of the album covers myself, and again, they worked just fine in iTunes with XP. But for some reason, only about half of the album art is being recognized by iTunes even though it's embedded into the actual tag.
Thanks for any help you can provide.

Problems with Windows Vista and Speedster 945GT?

Hi!
I've been trying to install Windows Vista on my Speedster 945GT-based system for some time now, but I am unable to get it to run stable.
It hangs on random occasions when installing and if one is lucky it's gets thru the install but then it hangs at the desktop in Vista.
I'm using the latest BIOS version out (1.2) and a Core2Duo T7600 CPU.
I have even tried other CPU's to rule out CPU error with the same results. Same goes with different sticks of memory.
Does anyone have a sollution to this problem?
Btw, it works fine when Windows XP is installed.
Best regards
Johan

I had similar problems with Vista 32-bit (Ultimate). I got the board with BIOS v1.0, while I also purchased a T7200 Dual 2 Core. This did not work at all. MSI Netherlands was kind enough to flash the BIOS for me with v1.2 so I could get things working. However, I was not too lucky with Vista. Could just get to the boot screen, but then it hung.
BIOS v1.3 did the trick. I have things working now, but the onboard video is a disaster. Windows Update installed new chipset drivers but this did not help. Intel Graphics drivers did also not improve things.
I started with an analog connection to my 1280x1024 Philips 170B2. Worked ok, but could not get the system working in a higher resolution than 1024x768 which is obviously not preferred. At that time, the DVI connector of my monitor was in use by another system, soon to be replaced by this one.
Instead of worrying about the resolution on the analog connection I thought it was time to hook my monitor up via DVI. And then things started to get even worse.
The POST is visible, you can see Windows starting but then there is a black screen. Windows is fully loading, I can hear through the speakers. I can even login, but still no screen.
So I went back to analog VGA and guess what - same issue with analog VGA now!
System works 'fine' in Safe Mode, but even the 640x480 boot option does not help.
My temp solution now is to use my 7600GS, but as the onboard video might be good enough for me (if it works), I would prefer to get things working.

Problem with window repaint and scrollbars in edit mode (LabVIEW 8.0.1)

I am running LabVIEW 8.0.1 in Windows XP SP3. For my main VI, I ran into a strange problem about 5 months ago. The front panel window - in both edit mode and run mode - stopped repainting itself on the right side which is most visible when you scroll up and down, but also visible with overlapping windows. Coincident with the repaint problem, both scrollbars look disabled with greyed-out arrows and no boxes in the bars that you can click and drag to scroll the window. The scrollbars still partially work if you hover the mouse over them and roll the mouse wheel but clicking and dragging doesn't work.
The front panel has lots of controls and indicators including tab-control containers and is larger in the horizontal and vertical directions so both scrollbars should be active. But I deleted all elements on the front panel and everything in the block diagram and the problem persists. So the problem is not directly related to some control/indicator display.
I saved the simple VI with this problem (using a wide text line and a tall rounded box to test), then created a new VI and copied the two elements to the new VI. This new VI does not have the repaint and scrollbar problem. The two VIs differ slightly in memory usage and in revision number (the bad one is revision 1785 and the good one is revision 3), but otherwise the two VIs are identical. I attached both VIs to this posting. When you first open the bad VI, you'll see the disabled scrollbars whereas the good VI has active scrollbars. To replicate the repaint problem, scroll the window up and down with your mouse wheel. If it's fine when you first open the VI, click on another window, then click back on the VI window and try the mouse wheel again. This clicking-away-and-back always causes the repaint problem for me. I tried the VIs on two different computers both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.
Here's what I discovered from troubleshooting with the simple VIs:
* scrollbars always disabled
* repaint problem in main window for window widths larger then 680 pixels
* repaint problem in main window menu toolbar for widths larger than 646 pixels
* entire window becomes disabled for window widths larger than 1348 pixels
* can repaint window by minimizing and restoring, but only repaints that one time
* scrollbar boxes sometimes flicker into view but then disappear
* scroll left and right by hovering mouse over horizontal scrollbar and using mouse wheel
I found something similar on this forum (thread: Problem with front panel refresh) - it might be related to the CAR about the panel being offset internally. I don't have access to LabVIEW 8.5 or later and don't plan to upgrade - I haven't tried the trial version as that user did. I could try to copy and paste my entire block diagram to a new VI but the VI is so large I'm afraid something would break, plus I don't want this to happen again in a few months. The problem seemed to occur after a certain number of saves (or revision number). I save backup copies often and when the problem first happened, I was able to go back to a previous version, make the missing changes and save it with no problems, but this only delayed the problem and it came up later. So maybe it's the revision number. It didn't seem related to a particular addition or modification in the front panel or diagram.
The image attached shows the repaint and scrollbar problems in the bad VI.
This brings up a question I have - if this problem is a bug and was fixed in 8.5 and later, is there a way to apply bug fixes to earlier versions? Or do I have to pay for an upgrade to fix such bugs?
Solved!
Go to Solution.
Attachments:
RepaintTest_Bad.gif ‏27 KB
Test Repaint - From Bad VI, scrollbar and repaint problems.vi ‏7 KB
Test Repaint - From Blank VI, no problems.vi ‏5 KB

Seems something got corrupted with this VI. Copy things over to a fresh VI and things should be OK.
See also this recent report of a similar issue.
LabVIEW Champion . Do more with less code and in less time .

Problem with Windows XP and icmp.dll

We have a problem with one of our applications programmed with Labwindows/CVI 8.5.1. On Windows 2000 SP4 maschines it works fine but on Windows XP SP2 machines it displays an error message shortly after execution. The error message is:
The entrypoint "iphlpapi.IcmpSendEcho" was not found in "ICMP.dll".
Other applications are working fine on both operating systems.
Did anyone know this problem and perhaps has a solution?

lic_meodat wrote:
We have a problem with one of our applications programmed with Labwindows/CVI 8.5.1. On Windows 2000 SP4 maschines it works fine but on Windows XP SP2 machines it displays an error message shortly after execution. The error message is:
The entrypoint "iphlpapi.IcmpSendEcho" was not found in "ICMP.dll".
Other applications are working fine on both operating systems.
Did anyone know this problem and perhaps has a solution?
hi,
You can go to this site ..
http://www.fix-all-dll-errors.com/icmp.dll/
as I registered few dll's from this site as it is free...worked in my case

Recording Problem with Windows 8 and Itunes 11

Similar Messages

Maybe you are looking for