Recording Reason Audio NOT MIDI into Logic

How do I record the audio output from Reason into Logic?

I found one way.
Here it is:
1. Record into Reason
2. In Logic Set The Channel Of An Audio Object To Rewire Reason Mix L/R (or whatever)
3. Bounce The Channel Inside Logic
4. Import Bounce If It Isn't Already In Your Audio Window
this is caveman primitive because more time is spent bouncing then mixing but it works.

Similar Messages

I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic but Logic won't send midi data out to the MOTU Traveller to the Piano Disc player

Hello All,
I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic Pro 9.1.8 but Logic won't send the midi data back out to the MOTU Traveller and thus to the Piano Disc player. I got it to playback one time but have no idea how and when it did it was looping or something because the velocity was way high coming back in and the damper pedal was slamming down. When I play a key on the piano the midi "in" light on the Traveller lights up. When I play the track back on my computer no lights blink on the Traveller and when I did the apple midi studio test in utilities when I play a key I get the confirmation signal noise and the Traveller blinks when I click on the down arrow of the Traveller in the Apple midi studio test the midi out light on the traveller never lights and the signal light on the piano does not blink either. No outbound signal at all...
I have messed with every possible parameter I can find and and have had help from one of Piano Disc's premier editors but no luck. The piano was prepped for me on Logic so it would work with my studio. I'm positive it's my fault and I'm overlooking something really simple and stupid but what!??!
Somebody please help. Thank you all in advance for ANY ideas you might have!

Blues Piano,
I'm not sure if this will be a help or not. I'm so Logic Pro wet behind the ears that I make newbies look experienced. However, I'm not expecting many on the Apple support forums have a PianoDisc system, much less one with the new optical record strip. While I don't have any record strip on my PianoDisc, I do have a PianoDisc iQ that's only a month old. I've been playing converted paper scrolls from hundred year old player pianos through it via the MIDI in port of the PianoDisc CPU. I've found I have to open the MIDI file in Logic Pro (10.0.4) then go to <Track><New External MIDI Track> then copy the existing track to that new external track. Only then can I see in the Track inspector (defaults left side of screen with the Icon for the instrument) the "Port" parameter. Then I can select my external MIDI device in that Port selector.
I've also encountered problems with the PianoDisc not using enough force on the notes or using too much force. To get around this problem, until I understand Logic better, I've been setting minimum and maximum volicities. To do that I right click on the track and select "Select All." Then I right click again and select "MIDI" then "MIDI Transform" then "Velocity Limiter." In the resulting pop up window in the center is a drop down and you can play with the velocity from "MIN" to "MAX" along with "ADD" "SUBTRACT" etc.
I hope this helps. I envy you your Mason & Hamlin. If you need more help on this just email me at pfleischmann at mac dot com.

How do I record an audio source outside of Logic while in Logic?

Hi everyone, I have a question I would like to address to the forum.
How do I record an audio source outside of Logic while in Logic? For example, I would like to record the audio off a youtube video or dvd to be then used in Logic. I am using a Dididesign M-Box Mini for both my audio input and audio output i.e. all sound is coming in and out of the M-Box. I hope this is an easy question to answer (I am a new Mac user). Thanks in advance.
Mac Pro Mac OS X (10.4.9)

Use the 3.5mm audio out jack on the back of your computer. Connect it to your audio interface, and record like normal. You need an adapter cable. ( 3.5mm stereo to two 1/4 inch mono) see link.
http://www.musiciansfriend.com/product/Live-Wire-3.5M-TRSDual-14-Y-Cable?sku=330 481&src=3WBZ4DS

Imported Reason audio not syncing with GB metronome

I'm working on a project in GarageBand that is built around a piano part that was exported from Reason. The Reason audio track is 128 BPM, so I created a GarageBand project that was the same tempo. The piano slows down at the very end of the song, so I set up the automator to adjust the GB tempo at the end. When I started recording other instruments, I noticed that the metronome was slightly off -- it starts out in sync, but the further along I get into the song the more out of sync it becomes (way before the tempo change at the end). I made the mistake of simply turning off the metronome and playing along with the piano track. Now I'm trying to add in some drum loops and the result has been disastrous.
So, what gives? Why aren't they in sync? Is there anything I can do about it? I'd rather not have to go back and re-record all of my instruments if that's possible to avoid.
Thanks.

After importing the GarageBand file into Logic I found that GarageBand for some reason had the the time signature changing slowly over time rather than instantly at the correct measure.

Wie kann ich Songdateien (Audio und MIDI) von Logic 6.3.1 Latinum auf Pro x einladen?

How can i import Songs created with Logic Platinum 6.3.1 into Logic Pro x
I manage to do it with Audio-Tracks but i cannot manage it in mixec tracks - Audio and Midi.
Please help

Eine Antwort zur Frage 3:
Im Disc-Fenster unter DVD-Rom-Content hast du die Möglichkeit, ähnlich wie bei einer Enhanced-Audio-CD neben den AUDIO/VIDEO TS-Ordnern separate Dateien und Ordner hinzuzufügen.

Reason rewire not working with Logic 9.1.8,Help!

I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
I've tried uninstall reinstall from 6.5 ,but still not working.....
Can someone help.....This is suppose to be easy.....Thanks!
2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

Audio not getting to logic

OS 10.9.1 - MBPro 13" / Logic 9. I'm using PreSonus AudioBox 22VSL and system preferences can see audio input. But I can't get any audio into Logic 9! Help! driving me nuts!

As you probably know... System Preferences has nothing to do with Logic.
Logic has it's own audio preferences do you have those set correctly?

HELP recording with behringer xenyx 2442fx into Logic??

Hey,
So i recently got a Behringer XENYX 2442FX mixer and I am trying to record drums into Logic pro.
The mixer came with a usb interface which takes two red & white L R cables.
I am trying to record into Logic however from reading other things online I'm starting to doubt that that is possible?
If anyone could give me help asap it'd be greatly appreciated as If i need to send the mixer back and get something else that will work, i'll need to do that quickly!
thanks again

http://video.google.com/videosearch?hl=en&client=firefox-a&rls=org.mozilla:en-US :official&hs=MCM&resnum=1&q=behringeru+control+uca200manual&um=1&ie=UTF-8&sa=X&oi=videoresultgroup&resnum=4&ct=title#
If this is how it hooks up... then no.. you cant seperate the drums with it because your coming out of a feed that is the stereo track.. into the interface... theres no possible way with that set up that it could seperate the tracks out. You just need an interface with enough I/O's to feed into logic.. like a Motu... then you just need a mixing board that you can use to control logic and I think that would be ideal for recording drums.. but really if you dont mind mixing in the computer you dont even need the mixing board to record the drums if you have a sizeable interface... anyways.. thats my 2 cents.. hope that helps a lil

Error while trying to synchronize audio to midi in logic 8

I'm having trouble with logic 8. every time i push play i get get this error message. ( error while trying to synchronize audio to midi) can someone tell me what to do!

Sometimes that message comes from having the clock source on the audio interface set to external when it should be internal.

Recording Audio from Keyboard into Logic

Hey,
I am new at Logic and trying to figure out how to get the songs from my keyboard onto Logic. Could someone please help me out?
Logic 8
Fast Track Audio Interface
Korg Triton
Mixer
Thanks!

logic1080 wrote:
That helped. Now the audio from my keyboard and computer run through the mixer.
Still no signal in logic when I press a key on the keyboard though. Is there a special setting in logic I should be in?
Go to *Logic Pro>Preferences>Audio>Core Audio>Devices>* select Fast Track as the input device
Also, I only really got strong signal from the keyboard into the Fast Track interface when I previously plugged a 1/4 mono from the L/R Output of the Triton into the Guitar 1/4 mono slot of the audio interface.
I can't understand why they should build an Audio Interface that has only 1 mono Input ,I think this can accept stereo signals depending on the jack you plug-in...but that's just me Check the manual.
Does the Audio Interface has a control panel or something...like most of them?(You could find it in Applications)
What selections can you make there?
Do you think the problem is where the RCAs are located? The line outputs of the Fast Track are connected to "7L 8R" on the mixer and the ones connected to 1/4 mono cable are in "Rec Out"
Here you mean 1/4 mono (Instrument) to the *Rec Out* of the Mixer ...yes that's fine.
Note: When I press a key on my keyboard I get signal in the mixer. It's just not in Logic or the audio interface.
Can you hear what the Triton's playing on the speakers?
If not turn up the volume on the channel you have the Triton connected and the Stereo Out ...make sure that the Gain level is not too high on the Triton channel (a red light below the Gain pot will illuminate when it is )
Have you turned the Gain knob labeled instrument on top of your audio interface...clockwise?
Check Logic's Audio Preferences to make sure that you have the Fast Track selected as the *Input Device*
And supposedly that is a mono input ,you make sure that the Audio track you have created in Logic is a mono track(1 circle instead of two indicating a stereo) and you have enabled the record button for that track......
Thanks!
No probs...
You could also check >> [Setting Up Your System|http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter =2%26section=0]
A
Message was edited by: immo

Digidesign Core Audio not working in Logic pro 7.1

Help! I'm not able to use Digidesign's (002 interface) as a core-audio interface for Logic Pro 7. Pro-Tools works fine with the 002. Logic works fine with built-in interface. However whenever I go to change from the built-in audio interface to the core audio 002 interface in audio drivers (in preferences), it won't allow me and I get the following message:
"Audio device has been removed" (press OK) then
"Previously selected audio interface is not available" (Press OK) (digidesign 002 interface has double brackets around the name in the audio drivers). If you try to relaunch driver again it disappears from the drivers list? In addition the "Digi design core-audio " application that opens up on the dock - just says "not connected" and some buttons are greyed out and you cannot "reconnect"?
Is there a conflict of drivers with the OS/Logic version and digi core-audio? I'm running Pro-Tools ver6.4, with digi core-audio 6.9 (updated from 6.4 - didn't solve the issue?), Logic Pro 7.1 and OS 10.3.9 (on a G4 1.25Ghz, 512Ram)?
It seems like a core-audio driver problem - but having updated to the latest version I'm still not getting any joy? Any offers?! Cheers.

Check the FW cable.
Anyway about compatibility Digidesign says this:
Mac OS X 10.3.9 Not Supported
With ALL versions of Pro Tools 6.x for Panther (other than Pro Tools LE 6.8.1 with Mbox 2 hardware only), the highest version of Mac OS X 10.3 that you should use is Mac OS X 10.3.8. There are incompatibilities with Pro Tools 6 and QuickTime 7, which is installed by Mac OS X 10.3.9. If you must use Mac OS X 10.3.9 for some reason, you should revert to QuickTime 6.5.2, available from the Apple website.
cheers
rob

WMV audio not importing into Premiere Pro CS5.5/CS6

I have two Win7 machines running CS5.5 and CS6 respectively. Prem Pro imports and edits the video sequence of a batch of wmv files recently referred to me for processing but does not show the audio at all. The files play perfectly in Windows media player. I presume there is a codec somewhere on my machines that wmplayer is using but how can I get Prem Pro to use it??? I don't usually use WMV but I have found some other wmv files which import nomally i.e. sound track included. Loading the files into Handbrake lists the audio for the successfully imported files as Source: English (wmav2) (2.0 ch) Codec: AAC (faac) Bitrate: 160. The files that Prem Pro does not import the sound for, list identically except that the source is shown as Unknown rather than English. All other details (wmav2 etc exactly the same.
Thanks

I have two Win7 machines running CS5.5 and CS6 respectively. Prem Pro imports and edits the video sequence of a batch of wmv files recently referred to me for processing but does not show the audio at all. The files play perfectly in Windows media player. I presume there is a codec somewhere on my machines that wmplayer is using but how can I get Prem Pro to use it??? I don't usually use WMV but I have found some other wmv files which import nomally i.e. sound track included. Loading the files into Handbrake lists the audio for the successfully imported files as Source: English (wmav2) (2.0 ch) Codec: AAC (faac) Bitrate: 160. The files that Prem Pro does not import the sound for, list identically except that the source is shown as Unknown rather than English. All other details (wmav2 etc exactly the same.
Thanks

Why will audio not move into timeline in Premiere Pro CC?

This has happened on two projects now. It will play in the monitor but when I try to move it into the timeline it is as if it does not exist. It will edit in Audition but that is time consuming and annoying if it is unnecessary. How do I fix this? I have been using CC since CS6 and this just started last week.

Hi Jason,
Jim was correct. You're audio is not patched. Click where it says A1 and you should good to go after that.
Thanks,
Kevin

OMF Files not Importing into Logic 7.2.3

Can anyone help me with this ongoing problem ? I'm writing music for a film where my editor is using the latest version of Final Cut Pro 5.1.2, I'm running Logic 7.2.3 on OSX 10.4.8 she exports the OMF Files....but I can't import them on my system. The files are imported without any problems at the mixers studio, but he uses Pro Tools.
Any Ideas ???

logic's import and export is very unreliable. actually it is something that i think is quite disgraceful. that said:
- are you sure that you have a self-contained OMF file in version 2 format? not a referenced OMF? you can tell because the OMF file will be large if it has the audio content embedded or small if it does not.
- most OMF problems are problems that come from the originator. for example, you can get problems if the audio is at different sample rates.
- try to get everyone to work with AAF files which are more reliable and do the same job.
- logic doesn't support different sample rates at the same time, unlike many video editing programmes. the audio should be consolidated before exporting and video references removed.
i hope this helps. this really is an area of weakness within logic. please post back with how you get on.

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

Recording Reason Audio NOT MIDI into Logic

Similar Messages

Maybe you are looking for